Need Pre_requisites to install Solution Manager in Solaries 9 and Oracle 10

Hi Administrators,
In my project, we have planned to implement Solution Manager 7.0 in O/S Solaries 9 and Database Oracle 10.2.
We are implementing this Solution Manager in already existing SAP server.
We have server like TSAPNGN, In this server already our QAS ECC 5.0 and QAS BW 3.5 are exist and running in this server.
I need information like, What is the pre_requisites to install SAP application, where already another SAP exist in Server.
Appreciate ur help.
Thanks & Regards,
Jagan.

Hello
There is no difference whether you are installing the Solution Manager on a separate server or an existing server already containing the DEV system. you will get some idea from these Notes
21960 Several instances/systems on one UNIX computer
28392 Two R/3 Systems on one Windows NT Server
322653 DB6: Two or several systems on a host
I think, you should go for Central System installtion for the Solman, with it's own database.
and what do you mean by 'standalone solman' here ?
Just go 'installation and upgrades' -> My application components -> SAP Solution Manager -> Solman 7.0 or EHp1 -> Installation and upgrades
For installation guide
installation and upgrade guiedes -> SAP components -> SAP Solution manager -> Select solman version

Similar Messages

DbSlErrorMsg rc = 20 error installing solution manager 3.2

what am i doing wrong?
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR      2007-10-23 00:40:18 [iaxxbdbld.cpp:1001]
           CR3ldStep::startR3ldProcesses lib=iamodload module=CR3ldStep
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPSSEXC.log
ERROR      2007-10-23 00:40:18 [iaxxbdbld.cpp:1001]
           CR3ldStep::startR3ldProcesses lib=iamodload module=CR3ldStep
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPAPPL0.log
ERROR      2007-10-23 00:40:18 [iaxxbdbld.cpp:1001]
           CR3ldStep::startR3ldProcesses lib=iamodload module=CR3ldStep
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPAPPL1.log
INFO       2007-10-23 00:40:18 [syxxccuren.hpp:347]
           CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(iastring)
           lib=iamodload module=CR3ldStep
Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB.
INFO       2007-10-23 00:40:18 [syxxccuren.hpp:347]
           CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(iastring)
           lib=iamodload module=CR3ldStep
Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB.
INFO       2007-10-23 00:40:18 [syxxccuren.hpp:347]
           CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(iastring)
           lib=iamodload module=CR3ldStep
Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB.
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR      2007-10-23 00:40:48 [iaxxbdbld.cpp:1001]
           CR3ldStep::startR3ldProcesses lib=iamodload module=CR3ldStep
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPAPPL2.log
ERROR      2007-10-23 00:40:48 [iaxxbdbld.cpp:1001]
           CR3ldStep::startR3ldProcesses lib=iamodload module=CR3ldStep
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPSSRC.log
ERROR      2007-10-23 00:40:48 [iaxxbdbld.cpp:1001]
           CR3ldStep::startR3ldProcesses lib=iamodload module=CR3ldStep
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPSDIC.log
INFO       2007-10-23 00:40:48 [syxxccuren.hpp:347]
           CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(iastring)
           lib=iamodload module=CR3ldStep
Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB.
INFO       2007-10-23 00:40:48 [syxxccuren.hpp:347]
           CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(iastring)
           lib=iamodload module=CR3ldStep
Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB.
INFO       2007-10-23 00:40:48 [syxxccuren.hpp:347]
           CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(iastring)
           lib=iamodload module=CR3ldStep
Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB.
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR      2007-10-23 00:41:18 [iaxxbdbld.cpp:1001]
           CR3ldStep::startR3ldProcesses lib=iamodload module=CR3ldStep
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPPOOL.log
ERROR      2007-10-23 00:41:18 [iaxxbdbld.cpp:1001]
           CR3ldStep::startR3ldProcesses lib=iamodload module=CR3ldStep
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPSPROT.log
ERROR      2007-10-23 00:41:18 [iaxxbdbld.cpp:1001]
           CR3ldStep::startR3ldProcesses lib=iamodload module=CR3ldStep
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPSDOCU.log
INFO       2007-10-23 00:41:18 [syxxccuren.hpp:347]
           CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(iastring)
           lib=iamodload module=CR3ldStep
Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB.
INFO       2007-10-23 00:41:18 [syxxccuren.hpp:347]
           CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(iastring)
           lib=iamodload module=CR3ldStep
Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB.
INFO       2007-10-23 00:41:18 [syxxccuren.hpp:347]
           CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(iastring)
           lib=iamodload module=CR3ldStep
Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB.
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR      2007-10-23 00:41:48 [iaxxbdbld.cpp:1001]
           CR3ldStep::startR3ldProcesses lib=iamodload module=CR3ldStep
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPSLEXC.log
ERROR      2007-10-23 00:41:48 [iaxxbdbld.cpp:1001]
           CR3ldStep::startR3ldProcesses lib=iamodload module=CR3ldStep
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPCLUST.log
ERROR      2007-10-23 00:41:48 [iaxxbdbld.cpp:1001]
           CR3ldStep::startR3ldProcesses lib=iamodload module=CR3ldStep
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPSLOAD.log
INFO       2007-10-23 00:41:48 [syxxccuren.hpp:347]
           CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(iastring)
           lib=iamodload module=CR3ldStep
Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB.
INFO       2007-10-23 00:41:48 [syxxccuren.hpp:347]
           CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(iastring)
           lib=iamodload module=CR3ldStep
Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB.
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR      2007-10-23 00:42:18 [iaxxbdbld.cpp:1001]
           CR3ldStep::startR3ldProcesses lib=iamodload module=CR3ldStep
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPUSER.log
ERROR      2007-10-23 00:42:18 [iaxxbdbld.cpp:1001]
           CR3ldStep::startR3ldProcesses lib=iamodload module=CR3ldStep
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAP0000.log
THIS IS WHAT THE LOG SAYS
C:\usr\sap\MGF\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#6 $ SAP
C:\usr\sap\MGF\SYS\exe\run/R3load.exe: version R6.40/V1.4
C:\usr\sap\MGF\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPPOOL.cmd -l C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPPOOL.log -stop_on_error
(DB) ERROR: DbSlControl(DBSL_CMD_IMP_FUNS_SET) rc = 20
(DB) ERROR: DbSlErrorMsg rc = 20
Thanks

hey Venkat
Im trying to install solution manager 3.2 with oracle 9i...
I successfully created the central instance.
when creating database instance i get that error. during the load phase..I installed nonunicode installation
central instance is running. could it be that I'm using wrong code page 1100?
I'm not sure what to do its been bugging me for past few days..
And also do you know if 10g is supported with solution manager 3.2? When i installed 10g it said "no database found on this host"
Thanks for your help
Message was edited by:
        anand patel

Install solution manager 4.0 fail (solaris & oracle 10g)

Install solution manager 4.0 be congested "start instance serveice" step fail.
Edited by: Kraikanchit Duangdee on Jan 21, 2008 5:00 PM

Oh, Sory so much
my step installer
1. pre-OS configuration parameter (solaris recomment on Master Install)
2. Installer solution manager
3. master install disk , select install solution manager 4.0, select OS(solaris) , select DB(oracle)
4.start install ,
5. error step ??? 27 "start instance server" fail ????
error detail.
error 2008-01-20
CJS-30149 ABAP Processes of Instance <SID> /Overbmgsoo (ABAP:Msncytrlinnign) class did not start after 50:00 Min Givising up
error 2008-01-20 17.52
FCD-00011 th step start with key NW_Onehost|ind|..... Nw_Onehost_system|ind|..... Nw_CI Instance |ind|.... Nw_CI instance start |ind|... start was executed with start erroe
Thank you.

Question for installing Solution Manager & ECC 5.0

Any idea for installing Solution Manager 3.2 on Windows server 2003 with Oracle9i problem when install Database Instance. Installation failed when the intallation progress went to Oracle Post-Load Action.
The message from startsap log file is
"running C:\usr\sap\T01\SYS\exe\run/sapstart.exe name=T01 nr=03 SAPDIAHOST=saptest02 -Wait
start service SAP01_03 on machine
saptest02
OpenService of SAPT01_03 failed. Error#: 1060
CreateNamedPipe for
saptest02\pipe\SAP01_03 Failed, Extended Error #2
start service SAP01_03 on machine
saptest02
OpenService of SAPT01_03 failed. Error#: 1060
C:\usr\sap\T01\SYS\exe\run/sapstart.exe=>sapparam(1c): No Profile Used."
Another question is about installing the Oracle database software: should we choose Create Databse or not when install Oracle Server Software only?
Is my installation process as following correct?
->SELECT A PRODUCT TO INSTALL:
Oracle9i Database 9.2.0.1.0
->WHAT TPYE OF INSTALLATION DO YOU WANT:
Enterprise Edition
->SELECT A DATABASE SUITED TO YOUR NEEDS:
Software only
After end of installation
install Oracle9i Client 9.2.0.1.0->Administrator
Thanks a lot

Hi Shusen, I´m trying to do the same think (Install ECC IDES with Oracle 9i in one computer for educational propose), can you help me with this:
1.I made the same Oracle install process because when I tried with sapserver.cmd nothing happened, for that reason i made:
SELECT A PRODUCT TO INSTALL:
Oracle9i Database 9.2.0.1.0
->WHAT TPYE OF INSTALLATION DO YOU WANT:
Enterprise Edition
->SELECT A DATABASE SUITED TO YOUR NEEDS:
Software only
After end of installation
I did not install client, is this correct?
2.After install this, I run the sapins.exe but show me this error: INSTALL FIRST SAP J2EE ENGINE, I download the JAVA SDK from JAVA page (java_ee_sdk-5-windows) but did not fix the problem: Do you know what file is this? Or, where is it in the DVD installation?
Thanks in advance if you or somebody can help me and excuse me if the answers are obviously, but I´m not a system engineer I´m only try to install IDES for learn SAP WM.
Thanks.

Can't Install Solution Manager on Suse Linux Enterprise Server 10 - JAVA

Hello everyone!
I've been trying to complete the pre-requisites in order to install Solution Manager SR2 on Suse Linux Enterprise Server 10 x64 - SP1.
There's only one last condition that I haven't met, and it's the Java Runtime Environment version...
I checked the recommended note 867110 and it says that i need to have installed the J2SDK 1.4.2_08.
SLES10 includes the 1.4.2_13, so I had to uninstall it, and download the right version from Sun Microsystem's official webpage.
When I installed the version 1.4.2_08, i'm not able to run SAPINST because there's no Java Runtime Environment running on the server.
I started to investigate and I found in some forums [NOT EXPLICITLY] that there's no port for J2SDK 1.4.2_08 on x64 linux systems.
I can't believe this is true because SLES10 is recommended by SAP to install Solution Manager, so I hope somebody can help me on this.
My specific question is: Does anybody know if is true that J2SDK 1.4.2_08 is NOT COMPATIBLE with x64 Linux?
In case of being true, is there any way to be able to run SAPINST ? because if I enable the version SLES brings built in, i'm able to run the SAPINST but it detects that i'm not running version 1.4.2_08 and doesn't allow me to continue installation.
I hope somebody can help me soon...
Regards!

> SAPINST_JRE_HOME=/opt/IBMJava2-s390-142/jre/bin:$PATH
>
> JAVA_HOME=/opt/IBMJava2-s390-142/jre/bin:$PATH
You downloaded the wrong version - the one you have is for Z-Linux(Linux running on the mainframe - not for x64).
You need to download the x86_64 (or AMD64) version.
Install the correct one and try on a new console:
export JAVA_HOME=/opt/IBMJava2-amd64-142
export PATH=$JAVA_HOME/bin:$PATH
Then execute
java -fullversion
and it should show the correct version.
Markus

Error installing Solution manager 7.0 EHP1

Hi All,
I am installing Solution manager 7.0 EHP1 on Windows server 2008 64 bit. I have downloaded the installation DVD's from service market place (Named: 51036441_part1, 51036441_part2 and 51036441_part3).
But i am getting error while giving the path for LABELASC. It is saying that Found the label SAP:WEBAS:7.01:SAPINST..WINDOWS_X64_64. but need the label SAP:UT_SOLMAN70:NW701...*
Please help
Regards
Akshay Korade

Dear Achsay,
u can download this below files in following link.
https://cds.sun.com/is-bin/INTERSHOP.enfinity/WFS/CDS-CDS_Developer-Site/en_US/-/USD/ViewFilteredProducts-SingleVariationTypeFilter
j2sdk-1_4_2_17-windows-amd64.exe
+ u can download suitable jce policies.
Regards
kesavan

I am trying to install solution manager 7.1

Hi,
I am trying to install solution manager 7.1
platforn O.S Windows X86_64 2008 server
              D B orcale 11.2
Install has got stuck in the phase 33 "install java engine"
when I check sapinst_dev.log it stopped updating any log after the step
TRACE      2011-07-06 09:19:12.984 [syxxcnode.cpp:454]
           CSyNodeImpl::move(const CSyPath & C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/SDMKIT.2.log, ISyNode::CopyMoveMode_t 0x3)
           lib=syslib module=syslib
Moved C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/SDMKIT.log to C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/SDMKIT.2.log
INFO       2011-07-06 09:19:12.984 [synxcpath.cpp:814]
           CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\ORA\CENTRAL\AS\SDMKIT.log.
INFO       2011-07-06 09:19:13.000
processing bar shows "Extracting pack/sdmrepository.sdc"
Has any one come across this issue....
thank you so much
Regards,
Jay

Hello,
The default parameters for the JVM are not adaquate for an X64 system, and seem to be for 32 bits systems.
This means when the J2ee folder is created in usr\sap...and the JVM is started with the default java parameters on an X64 system, it will fail. The installation guide should refer you to the JVM settings, but if you are using SAPJVM, then Note 1603093 has the required parameters.
As an example the maxheap needs to be set to 2048, but it will only be set to 1024.
In order to resolve, you need to find the Note for the Java parameter settings for your JVM, be it Oracle (Sun), IBM or SAP, run the configtool to modify them accordingly.
Then once this is done re-start the install, using the existing configuration file, it will advance rapidly to the point it failed, and then start he JVM successfully. Or you can start it in the SAPMMC and once you are satisfied it will start with the parameters, restart the install. This is a better method because
it is much faster if you make a mistake and it fails on a typo in a parmeter setting.
Unfortunately you cannot set the JVM paramters prior to the JVM being created, and it has just been created at the phase in which your install has failed.
Hope this insight gets you going again.
Regards,
Paul

How to install Solution Manager 7.0 ehp 1 on Laptop

Dear Expert !
I have a laptop Sony Vio only support 32 bit, but I need install Solution Manager 7.0 EhP 1 on this laptop to test. So you can show me how to do that . I hope, you show me as soon as possible.
Thanks and Best Regards,
Tru Hang

Tru Hang,
Even when 32 bit Solution Manager was supported, it is very doubtful your laptop would have the required memory or diskspace to install and run the system. You can see the system requirements in the SAP installation guides.
Hope this information was helpful.
Regards,
Paul

Configure TMS in fresh installed Solution Manager system

Hi Expets,
I have fresh Installed Solution manager. Configure TMS and now want to configure solution manger so that I can monitor all our SAP system from Solution manager. How I configure our SAP system in solution manager?
Also would like to know after TMS implementation if we like to use ChaRM or CTS+ so what changes required in current TMS setting? Thanks in advance.

Hello,
No Deejoy, I provided you with how to resource to do the things you requested.
TMS is transport Management System.
If you want to manage transports with an enhanced product CTS+ I provided the configuration guide.
If you want to implement ChaRM, I pointed you to the Wiki.
If you want to inegrate CTS+ with ChaRM, I also provided you with resources.
And lastly, I directed you to RKT-SOLMAN which can help you configure any aspect of Solution Manager.
But I do not see where I said to manage TMS on Satellite systems you need to implement ChaRM.
Charm was only raised, because you raised it in your question.
You have all the resouces you require to address everything you raised.
This is what is provided in my earlier reply.
Regards,
Paul

Install Solution Manager 4.0 Support Release 4 ,JDK ERROR

I'm install Solution Manager 4.0 Support Release 4 on Windows 2003 Enterprise x64 Edition with Oracle10g
and JSDK 1_4_2_18,when confirm JDK DIRECTORY,Its shown error below.
ERROR 2008-07-15 09:00:21.328
FCO-00011 The step verifyPolicy with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_getJavaHome|ind|ind|ind|ind|1|0|verifyPolicy was executed with status ERROR .
SAPinst has found a valid JDK directory.The installed JDK has version 1.4.2_18,confirm that you want to use this JDK DIRECTORY.
Please help me

Oh, Sory so much
my step installer
1. pre-OS configuration parameter (solaris recomment on Master Install)
2. Installer solution manager
3. master install disk , select install solution manager 4.0, select OS(solaris) , select DB(oracle)
4.start install ,
5. error step ??? 27 "start instance server" fail ????
error detail.
error 2008-01-20
CJS-30149 ABAP Processes of Instance <SID> /Overbmgsoo (ABAP:Msncytrlinnign) class did not start after 50:00 Min Givising up
error 2008-01-20 17.52
FCD-00011 th step start with key NW_Onehost|ind|..... Nw_Onehost_system|ind|..... Nw_CI Instance |ind|.... Nw_CI instance start |ind|... start was executed with start erroe
Thank you.

Error while installing Solution manager

Hi,
It is urgent Please.
I am trying to install Solution manager 4.0 on Linux and Maxdb.
But during Phase Configure UME i am getting below error.
ERROR 2007-12-17 16:48:16
 CJSlibModule::writeError_impl()
CJS-30059 J2EE Engine configuration error. DIAGNOSIS: Error when configuring J2EE Engine. See output of logfile umconfigurator.log: '
java.lang.ClassNotFoundException: com.sap.security.tools.UMConfiguratorLoad
 at com.sap.engine.offline.FileClassLoader.findClass(FileClassLoader.java:691)
 at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:600)
 at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:578)
 at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:79)
TRACE [iaxxejsbas.hpp:460]
 EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2007-12-17 16:48:16
FCO-00011 The step runUMConfigurator with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|3|0|NW_UME_Configuration|ind|ind|ind|ind|1|0|NW_UME_Configuration_Doublestack|ind|ind|ind|ind|1|0|runUMConfigurator was executed with status ERROR .
Can anybody please give me the solution on this.
Vinnu.

1. Check the rights of the user with which you are installing.
2. Check if any firewall is running.
3. Check the JDK version, you should go with j2sdk1.4.2_09.
regards
tamilboy

Error on install Solution Manager : Jcmon(error 4). No space left on device

Hi
I am having a problem installing Solution Manager 7.0 EHP1- AIX 6.1 DB2 9.7
During the unpacking phase error:
FCO-00011 The step unpack with step key was executed with status ERROR (Last error Reported by the step: Execution of the command "/ tmp/sapinst_exe.4325530.1325543592/SAPCAR-x-v-i-r / usr / sap / SMG / SYS / exe / run-f / MidiasInstall / IMKernel/DATA_UNITS/K_701_U_AIX_PPC64/DBINDEP/SAPEXE.SAR, "finished with return code 4. Output
<html> <head> </ head> <body> An error occurred while processing option EhP1 SAP Solution Manager 7.0> SAP Systems> IBM DB2 for Linux, UNIX, and Windows> Central System> Central System (Reported by the last step error: Execution of the command "/ tmp/sapinst_exe.4325530.1325543592/SAPCAR-x-v-i-r / usr / sap / SMG / SYS / exe / run-f / MidiasInstall/IMKernel/DATA_UNITS/K_701_U_AIX_PPC64 / DBINDEP / SAPEXE.SAR, "finished with return code 4. Output:
Sapce: processing archive / MidiasInstall/IMKernel/DATA_UNITS/K_701_U_AIX_PPC64/DBINDEP/SAPEXE.SAR (version 2.01)
x jcmon
Sapce: error writing to / usr / sap / SMG / SYS / exe / run / jcmon (error 4). No space left on device).
Note: I downloaded the newest sapinst but not resolved.
SAPinst build information:
abi version: 722
make variant: 720_REL
build: 1296039
compile time: 26 Dec 2011 02:46:25
Media used:
51041320 - DB2 9.7 - Client
51041317_1 DB2 9.7 - RDBMS
51040438 - Export
51040437 - Installation Master
51040439 - Java SW Comp
51040584 - Kernel
Filesystem GB blocks Free% Used Iused% Iused Mounted on
/ dev/hd2 5:00 49 709 2.76 45% 8% / usr
/ dev/fslv00 15:00 15:00 15 1% 1% / usr / sap / SMG
any idea ?

Hi,
The /usr/sap file system looks fine.
Could you also check the file space on the /tmp file system? This is usually less and SAPInst can fill this up very quickly.
Ideal to create a seperate SAPInst directory rather than use the default /tmp/sapinst_instdir.
Regards,
Srikishan

Problem installing SOLUTION MANAGER in db2

Dear consultans;
I have a problem installing solution manager in db2.
In phase 'Import ABAP' the sapinst shows the following message:
Execution of the command "/usr/sap/SOL/SYS/exe/run/R3load -testconnect" finished with return code 2. Output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
/usr/sap/SOL/SYS/exe/run/R3load: START OF LOG: 20080826111928
/usr/sap/SOL/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#16 $ SAP
/usr/sap/SOL/SYS/exe/run/R3load: version R7.00/V1.4 [UNICODE]
Compiled May 5 2008 21:32:44
/usr/sap/SOL/SYS/exe/run/R3load -testconnect
DbSl Trace: DbSlConnect to 'SOL' as 'sapsol' failed
(DB) ERROR: db_connect rc = 256
DbSl Trace: DbSlConnect to 'SOL' as 'sapsol' failed
(DB) ERROR: DbSlErrorMsg rc = 29
/usr/sap/SOL/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/SOL/SYS/exe/run/R3load: END OF LOG: 20080826111930
ERROR      2008-08-26 11:19:30.422
           CJSlibModule::writeError_impl()
CJS-30023 Process call '/usr/sap/SOL/SYS/exe/run/R3load -testconnect' exits with error code 2. For details see log file(s) R3load.e
xe.log.
ERROR      2008-08-26 11:19:30.748 [sixxcstepexecute.cpp:951]
FCO-00011 The step testDatabaseConnection with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_Cr
eateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|testDatabaseConnecti
on was executed with status ERROR ( Last error reported by the step :Process call '/usr/sap/SOL/SYS/exe/run/R3load -testconnect' exi
ts with error code 2. For details see log file(s) R3load.exe.log.).
The file R3load.exe.log show the following..
(root)sidtsmp:/install/instalacion> more R3load.exe.log
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
/usr/sap/SOL/SYS/exe/run/R3load: START OF LOG: 20080826111928
/usr/sap/SOL/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#16 $ SAP
/usr/sap/SOL/SYS/exe/run/R3load: version R7.00/V1.4 [UNICODE]
Compiled May 5 2008 21:32:44
/usr/sap/SOL/SYS/exe/run/R3load -testconnect
DbSl Trace: DbSlConnect to 'SOL' as 'sapsol' failed
(DB) ERROR: db_connect rc = 256
DbSl Trace: DbSlConnect to 'SOL' as 'sapsol' failed
(DB) ERROR: DbSlErrorMsg rc = 29
/usr/sap/SOL/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/SOL/SYS/exe/run/R3load: END OF LOG: 20080826111930
And if I do the following sentence it's finished ok
sidtsmp:db2sol 6> db2 connect to SOL
   Database Connection Information
Database server        = DB2/AIX64 9.1.4
SQL authorization ID   = DB2SOL
Local database alias   = SOL
(root)sidtsmp:/sapmnt/SOL/exe> su - db2sol
sidtsmp:db2sol 1> db2 connect to SOL user sapsol
Enter current password for sapsol:
   Database Connection Information
Database server        = DB2/AIX64 9.1.4
SQL authorization ID   = SAPSOL
Local database alias   = SOL
I reboot the server and now the sentence finished wrong.
sidtsmp:db2sol 8> db2 connect to SOL user sapsol
Enter current password for sapsol:
SQL30082N Security processing failed with reason "15" ("PROCESSING FAILURE").
SQLSTATE=08001
sidtsmp:db2sol 9>
Any suggestion?
Best regards,
Julene

Hi Julene.
Just one suggestion really,....
post the question on the Solution Manager forum
Chrs, M

Can I install Solution Manager 7.0 in Window Server 2008 R2 Enterprise ed.?

Hi, SDN experts.
I am trying to install Solution Manager 7.0 in in Window Server 2008 R2?
I checked the the software requirement for SAP Solution Manager 7.0, it only mentioned Window Server 2003 and 2008 enterprise edition.
I am trying to install Solution Manager 7.0 in in Window Server 2008 R2 enterprise edition?
When I ran the Solution Manager Master Installer, the Pre-requisite Checker gave a warning message saying that it detected incompatible server version, that the server version is Windows NT 6.1 (Build 7601: Service Pack 1) (I guess it meant Window Server 2008 R2).
=======
The following Windows operating system version is supported: Windows Server 2003 (i.e. Version 5.2) and Windows Server 2008 (i.e. Version 6.0).
Current Windows version: Version 6.1, Service Pack 1.0, productive type: Server.
You can check the current version of you operating system by runningu2026u2026..
========
Can I actually install Solution Manager 7.0 in Window Server 2008 R2? Will this cause problem during the installation/post-installation if I ignore this message?
Thanks,
KC

Hi,
I think it is not straight forward to install SAP Solution Manager 7.0 in MS Window Server 2008 R2.
I am installing Solution Manager 7.0 , the installation encountered error on Create Java Users step (Phase 31 of 44). When I login to SAP solution Manager system through SAP GUI. I encountered this error:
"OS release Windows NT 6.1 7601 Service Pack 1 4x AMD64 Level 6 (Mod 44 Step 2) is not supported with this kernel (700)'
I found that it is because I am installing SAP Solution Manger 7.0 in MS Window Server 2008 R2, which the existing kernel version does not support.
Do you know which kernel I should install?
I browsed in:
SAP Application Components" SAP SOLUTION MANAGER" SAP SOLUTION MANAGER 7.0" Entry by Component" Solution Manager ABAP Stack
SAP KERNEL 7.00 64-BIT UNICODE --> Windows Server on x64 64bit -->MS SQL SERVER
I downloaded:
SAPEXEDB_291-20001361.SAR Kernel Part II (for Basis 7.00) 291
Is this the right Kernel patch I should use?
If it is the right kernel patch file, how do I apply the latest kernel to existing Solution Manager system? Can you give me some guidance on this?
Thanks,
KC

Error at step 42/45 while install Solution Manager 4.0

Hi SAP guru,
I'm install Solution Manager 4.0 on Windows 2003 R2 with Oracle10g
and JSDK 1_4_2_16, while facing step 42/45 (Configure System Landscape Directory). Its shown error below.
ERROR 2008-01-17 16:02:04
CJS-30059 Java EE Engine configuration error. DIAGNOSIS: Error when configuring J2EE Engine. See output of logfile java.log: 'JSE'.
ERROR 2008-01-17 16:02:04
FCO-00011 The step configSLDMainLocalMapSecRolesToUsers with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|5|0|NW_Usage_Types_Configuration_AS|ind|ind|ind|ind|0|0|NW_CONFIG_SLD|ind|ind|ind|ind|0|0|configSLDMainLocalMapSecRolesToUsers was executed with status ERROR .
Any solution for this problem?
PS. I was ran sapinst.exr SAPINST_SKIP_ERROR=true on step 39 (Install Software Units) after set SDM mode = integrated.
Thanks in advance

Hi Snehal,
The log I paste above was too many days ago. Thus, I'm get a new one from Log Browser for you.
ERROR 2008-01-21 19:05:35
CJS-30059 Java EE Engine configuration error. DIAGNOSIS: Error when configuring J2EE Engine. See output of logfile java.log: 'JSE'.
ERROR 2008-01-21 19:05:35
FCO-00011 The step configSLDMainLocalMapSecRolesToUsers with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|5|0|NW_Usage_Types_Configuration_AS|ind|ind|ind|ind|0|0|NW_CONFIG_SLD|ind|ind|ind|ind|0|0|configSLDMainLocalMapSecRolesToUsers was executed with status ERROR .
and this from sapinst_dev.log as your requested.
INFO 2008-01-21 19:05:35
 CJSlibModule::writeInfo_impl()
Execution of the command "C:\j2sdk1.4.2_16\bin\java.exe -classpath E:/usr/sap/SOL/DVEBMGS01/j2ee/cluster/server0/apps/sap.com/tclmctcutilbasic_ear/servlet_jsp/ctc/root/WEB-INF/classes/ com.sap.ctc.util.ConfigMainExt XXXXXX ahosapso:50100 J2EE_ADMIN XXXXXX" finished with return code 0. Output:
TYPE=A STATE=401 INFO_SHORT=Error connecting to http://ahosapso:50100/ctc/ConfigServlet?param=com.sap.ctc.util.SecurityRoleConfig;MAP_SECURITYROLE_TO_USER;ROLE=DataSupplierLD,USER=SLDDSUSER,COMPONENT=sap.com/com.sap.lcr*sld,HOST=ahosapso,P4PORT=50104,J2EE_ADMIN=J2EE_ADMIN,J2EE_PASSWORD=des19(66|31|151|231|117|153|233|51|218|54|). The provided user data might be incorrect or user might be locked. CONFIGURATION=
TRACE [iaxxejsexp.cpp:188]
 EJS_Installer::writeTraceToLogBook()
NWException thrown: nw.configError:
Java EE Engine configuration error. DIAGNOSIS: Error when configuring J2EE Engine. See output of logfile java.log: 'JSE'.
ERROR 2008-01-21 19:05:35
 CJSlibModule::writeError_impl()
CJS-30059 Java EE Engine configuration error. DIAGNOSIS: Error when configuring J2EE Engine. See output of logfile java.log: 'JSE'.
TRACE [iaxxejsbas.hpp:460]
 EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2008-01-21 19:05:35
FCO-00011 The step configSLDMainLocalMapSecRolesToUsers with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|5|0|NW_Usage_Types_Configuration_AS|ind|ind|ind|ind|0|0|NW_CONFIG_SLD|ind|ind|ind|ind|0|0|configSLDMainLocalMapSecRolesToUsers was executed with status ERROR .
TRACE
<html><head></head><body>An error occurred while processing service SAP Solution Manager 4.0 Support Release 1 > SAP Systems > Oracle > Central System > Central System Installation. You may now<ul> <li>press Retry to repeat the current step.</li> <li>press the View Log button to get more information about the error.</li> <li>stop the task and continue with it later.</li></ul>Log files are written to C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS.</body></html>
TRACE [iaxxgenimp.cpp:1093]
 showDialog()
waiting for an answer from gui
Edited by: jitpanu sriudomwat on Jan 24, 2008 3:47 AM

Need Pre_requisites to install Solution Manager in Solaries 9 and Oracle 10

Similar Messages

Maybe you are looking for