Need report to show # of opportunities updated vs. number created

I'd like to show for each rep by day
Date Repname #opened #updated
I'm not sure how to do this based on the #of opportunities metric

Unfortunately we are still on R17. But I checked on another instance and see the feature you are talking about. However, i don't think this will be enough for what I need to do. The scenario is that the salesperson is being assigned X# of opportunities per day. So to clarify the numbers I'm looking for is # assigned vs. # updated (per day or within a selected date range). I think the best I'll be able to do is
# updated based on the modified date on the opportunity record itself, but the performance is terrible not sure, could be my other rollup fields. If you have any other advice that would be great.

Similar Messages

Report that shows the PO and PR number for each FI doc # of invoice posting

Hi
I want a report in SAP for PO and PR no. for each FI doc.
Thanks & Regards

There is no standard report. Through development or BI.

Need to create alv report to show pan card number.

Hi,
I need to create alv report to show employee and vendor name , number , Pan card number .This is for hr module.
could any one tell me table and fields for this and how I can relate them with foriegn and primary key.
Regards,
Moderator Message: Do your own work
Edited by: kishan P on Oct 5, 2010 10:38 AM

Yes, but it only has one generic Date column, no start date and end date. I can't use that twice in the prompt. Although I can specify it to be 'between', but I'm not sure I can pass values to both variables like that.
Currently I have used Campaign Start Date and Campaign End Date to enter values in calender format to the variables.

SCCM Report for Software Updates that show the required update and its size

Hello-
I created multiple windows update deployments, but was looking to view a report that shows me the update name (like the KB and MS) along with the size of the update.
Does anyone know if there's a pre-made report? If not, does anyone know of a good query to get this info?
Thanks!
Andrew

Yes, I know this is an old post, I’m just trying to clean them up.
There is no pre-canned report for this. Yes a report can be written to collect this inform but keep in mind that a SU mind have several versions aka 1 for Winxp, 1 for Vista, 1 for Win2k3, 1 for Win2k3 Sp1, etc. if you are trying aggregate
the data it will take a bit of fancy SQL/SSRS work to get this done. BTW Getting the size of the KB also take a bit of work.
http://www.enhansoft.com/

Update showing up in "Compliance 5 - Specific Computer" Report even after removing the update from the Software Update before creating Group and Package

So I've created a Software Update Group and I did NOT want anything in there dealing with Internet Explorer 11 since the organization is currently stuck at using 10 as the highest. So I made sure that Internet Explorer was NOT in the list and then I deployed
the package.
After running my Overall Compliance report it shows that the systems are compliant, but when I view the "Compliance 5 - Specific Computer" I see that "Internet Explorer 11 for Windows 7 for x64-based Systems" is listed in the report.
This is just a testing phase right now and I have not created a WSUS like Domain level GPO. I understand that the SCCM client creates a local policy on the clients for the location of the Software Update Point (Specify
Intranet Microsoft update service location), but the "Configure Automatic Updates" policy is set to Not Configured, which it looks like when this
is set, the "Install updates automatically (recommended)" at 3AM is the default.
Is the reason why the "Internet Explorer 11 for Windows 7 for x64-based Systems" update is showing up in the list due to the fact that the "Configure
Automatic Updates" policy is set to Not Configured
and therefore it is still reaching out to check Windows Update online?
So, if I do create a Domain level GPO to Disable the "Configure
Automatic Updates" policy, then the "Internet Explorer 11 for Windows 7 for x64-based Systems" update would not show up in the "Compliance 5 - Specific Computer" report?
By the way, I have a Software Update Maintenance Window configured for the hours of 1AM-4AM so the 3AM default time falls within this time frame, therefore, I am assuming the SCCM 2012 client will not allow the Windows Update Agent to install the "Internet
Explorer 11 for Windows 7 for x64-based Systems" update, even though it has detected it is "Required".
Thanks

But, don't you need a Deployment Package in order to deploy the Software Update Group? The Software Update Group uses the downloaded updates contained in the Deployment Package located in, wherever the Package Source is, right?
One more quick question that you will know right off hand, because, well, you just will I'm sure.
No. The software update group really has nothing to do with any update packages. The update group assigns updates to clients and in turn clients use update packages to download assign and applicable updates from. There is no connection between the two though
as the client can download an update from any available update package. Thus, it's more than possible to updates in an update package that are not in any update groups and it is also possible for an update to be in an update group without being in any update
package.
If the "Configure Automatic Updates" policy is set to "Not Configured" and since this keeps the 3AM Automatic Updates default, if I was to remove the Software Update Maintenance Window from being between 1AM-4AM, will the WUA agent install updates
at 3AM, or no because the SCCM 2012 client still manages and oversees it and basically blocks that from occurring?
No, ConfigMgr does not in any way block the WUA; however, the WUA can only autonomously install updates it downloads directly from WSUS. Thus, since there are no updates approved or downloaded in your WSUS instance, there's nothing for it to download and
install. If you happen to actually be going into WSUS and approving updates (which you should not be doing as its unsupported), then yes, it actually would install updates -- this is outside of ConfigMgr's control though. Generally, disabling the WUA via a
GPO is the recommended to prevent any accidental installations or reboots (as the WUA wil also check for initiate pending reboots outside of ConfigMgr).
Lots more info in these two blog posts:
- http://blog.configmgrftw.com/software-update-management-and-group-policy-for-configmgr-what-else/
- http://blog.configmgrftw.com/software-updates-management-and-group-policy-for-configmgr-cont/
Jason | http://blog.configmgrftw.com

Report to show Endpoint Protection last time updated?

Hello,
I am trying to create a report to show the Endpoint Protection version and the last time it updated. I found this page of different views but non of them include last update:
http://technet.microsoft.com/en-us/library/dn581986.aspx
Does anyone know a way of doing this or is it not possible?
Thanks

For Custom End Point Report, You can check below link
http://blogs.technet.com/b/configmgrteam/archive/2012/03/28/building-custom-endpoint-protection-reports-in-system-center-2012-configuration-manager.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

I too am experiencing the App Update indicating several updates are available...but none show and the Update All does not show either. I see several Apple products have this problem. Need a fix!

Can anyone yet find a problem to the Apple Update Icon showing several updates are available...but...none show to actually update....just a blank screen. I have done several reset operations, including complete reset as recommended by others, but yet the problem remains. I need a fix to this so I can update the Apps indicated. Apple needs to publish this fix PRONTO.

The update server is down; try this temporary workaround
App Store>Purchased>Select "All"
Note: Look out for apps that have the word "Update"
http://i1224.photobucket.com/albums/ee374/Diavonex/9c256282736869f322d4b3071bbb2 a82_zps51a6f546.jpg

Need link for iCal updates (they are not showing on Software Update)

Apple's iCal update page does not give an actual update - it just gives instructions on how to use OSX 'Software Update'. Software Update doesn't show any iCal updates when I run it.
I need the latest versions for Panther 10.3.9 AND the version for Tiger 10.4.9
So what is the bonafide link to getting iCal updates/versions?
Anyone know? Thanks.

mrchauncey,
iCal 1.5.5 is the most recent for Panther, and can be downloaded from here.
In order to obtain the most recent version for Tiger Mac OS X 10.4.9, you can use the Custom Install feature from your Mac OS X installation disk. Then use the Mac OS X 10.4.9 Combo Update to bring the iCal version up-to-date for that release of Tiger.
;~)

HT201210 please,I need your help ! I was updating my iphone ios to ios4.2 and then problems begins when it shows that it needs to restore the factory software to I was trying to restore ,but that didn't happen it begins but then it shows unknown error 101

please,I need your help ! I was updating my iphone ios to ios4.2 and then problems begins when it shows that it needs to restore the factory software to I was trying to restore ,but that didn't happen it begins restoring but then it shows unknown error 1015

Stop being impatient.
From the article that the question was posted from:
Errors related to downgrading iOS
The required resource cannot be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go to Settings > General > About and check the version of iOS on the device. If it is newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed. Installing an older version of iOS over a newer version is not supported.
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
You cannot downgrade.
If you have a 3GS, you can only install iOS 6.1.3 which is the current version of iOS for the device.

Need: report showing modification dates for all files in WA

We're having struggles in our first major product release of BC4J components on OC4j
using OSCM for version control.
Mood and release processes are getting more and more extreme as a result of not
being able to easily manage our release configurations (CM).
We're desparately in need of a report that shows:
- what files have been modified VS a configuration name.
- What files have been modified since I refreshed my WA
In both we need to be able to print the list.
Any sql scripts to share or cmd line script would greatly be appreciated!
Thanks,
curt

David,
Great, I'm making progress! Thanks.
Yes on the CLI compare of two cfg's, got this working. THANKS
use of the -fs<myfile> exports this to a printable file too.
Work in progress:
- Compare a cfg{N.M} to what's in a pwa or what would be in a pwa if refreshed?
Experiments here haven't yeilded good results:
CLI: set workarea myReleaseWA
CLI: compare -rpmyCfg{1.0} -rpFolderInWA{MAIN;LATEST}
Some how the directory walking is comparing apples VS oranges and all paths are different.
- What files have been checked into a branch and I would get if I refreshed my PWA?
Your SQL above doesn't exactly do this from my experiments.
The c.spec_entry is null filters on currently checked out files.
Config. Management may (usually) doesn't care about checked out files, just new checkins that
a new release would get from a download latest.
The best I've been able to hack are:
CLI: set workarea my_release_pwa
CLI: dir -s-nh-u-pth
Since dir doesn't support -fs<myfile> or >myfile one needs to cut and past and save to a file
or use CLI in one shot mode.
This allows for greping/searching on current month and looking for files newer than the last release date.
Another SQL based solution that orders the above same info from dir (I'm guessing?) is:
select w.NAME wa_name
,va.changed_by
,to_char(va.date_changed,'DDMONYY HH:MI:SS')
,va.created_by
,to_char(va.date_created,'DDMONYY HH:MI:SS')
,jr_name.get_path(c.object_ivid,'VLABEL') obj
from i$sdd_wa_context c
,i$sdd_workareas w
,i$sdd_version_associations va
where w.irid = c.workarea_irid
and w.name = 'smithc04_commissary_wa' ---- my pwa
and va.to_ivid = c.object_ivid
and c.spec_entry is not null
and va.date_changed is not null
order by va.date_changed desc
/This creates the same report as from dir only sorted conveniently.
Still the use case question hasn't been precisely answered. I'm still guessing what new files/versions
would be downloaded vs a release configuration or vs my [release_pwa]?
I'm alot closer though and thanks,
curt

HT1338 I am still with 10.5.8 and my macbook does not show any software updates, i am willing to pay for a new software if it is needed, because i can't connect mi iPhone 5S or iPad mini to iTunes. PLEASE HELP!!!!!

How do i update 10.5.8 if my macbook does not show any software updates?

Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading from Snow Leopard to Lion or Mountain Lion to Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mavericks- System Requirements
       Macs that can be upgraded to OS X Mavericks
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.

Crystal Reports 2010 shows error on 64 bit vista/7 machines

Hello,
 
I search the threads before posting my problem. I saw number of threads similar to this but none of them is pointing towards solutions to my problem. Thus decided to create new one. I tried various things listed in old post to solve my problem but no solution. I am listing below what I have already tried.
 
Following is my development environment: 
- OS windows XP 32 bit 
- MS Visual Studio 2010 
- Crystal Reports 2010 
- windows application with target framework 3.0 
- when i build solution for client i change target platform to x86 
 
My client machine 
1) 
- OS windows vista 64 bit 
- Crystal Reports for VS2010 Redist 64 bit 
2) 
- OS windows 7 64 bit 
- Crystal Reports for VS2010 Redist 64 bit 
 
On my development machine everything works fine. Only client machines having problem opening reports. I am having problem opening reports on client machines. I shows following error. My windows application runs fine but when we try to open reports it shows log4net error.
 
 
start error text----
 
 
The type initializer for 'CrystalDecisions.ReportSource.ReportSourceFactory' threw an exception. 
 
See the end of this message for details on invoking 
just-in-time (JIT) debugging instead of this dialog box. 
 
Exception Text ************** 
System.TypeInitializationException: The type initializer for 'CrystalDecisions.ReportSource.ReportSourceFactory' threw an exception. ---> System.TypeInitializationException: The type initializer for 'CrystalDecisions.Shared.SharedUtils' threw an exception. ---> System.IO.FileNotFoundException: Could not load file or assembly 'log4net, Version=1.2.10.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified. 
File name: 'log4net, Version=1.2.10.0, Culture=neutral, PublicKeyToken=692fbea5521e1304'
 at CrystalDecisions.Shared.SharedUtils..cctor() 
 
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
 
 --- End of inner exception stack trace ---
 at CrystalDecisions.Shared.SharedUtils.GetFullTypeName(Type type)
 at CrystalDecisions.ReportSource.ReportSourceFactory..cctor()
 --- End of inner exception stack trace ---
 at CrystalDecisions.Windows.Forms.CrystalReportViewer..ctor()
 at BackOffice.frmReportViewer.InitializeComponent()
 at BackOffice.frmReportViewer..ctor()
 at BackOffice.mdiMain.vendorsListToolStripMenuItem_Click(Object sender, EventArgs e)
 at BackOffice.mdiMain.vendorsListToolStripMenuItem1_Click(Object sender, EventArgs e)
 at System.Windows.Forms.ToolStripItem.RaiseEvent(Object key, EventArgs e)
 at System.Windows.Forms.ToolStripMenuItem.OnClick(EventArgs e)
 at System.Windows.Forms.ToolStripItem.HandleClick(EventArgs e)
 at System.Windows.Forms.ToolStripItem.HandleMouseUp(MouseEventArgs e)
 at System.Windows.Forms.ToolStripItem.FireEventInteractive(EventArgs e, ToolStripItemEventType met)
 at System.Windows.Forms.ToolStripItem.FireEvent(EventArgs e, ToolStripItemEventType met)
 at System.Windows.Forms.ToolStrip.OnMouseUp(MouseEventArgs mea)
 at System.Windows.Forms.ToolStripDropDown.OnMouseUp(MouseEventArgs mea)
 at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
 at System.Windows.Forms.Control.WndProc(Message& m)
 at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
 at System.Windows.Forms.ToolStrip.WndProc(Message& m)
 at System.Windows.Forms.ToolStripDropDown.WndProc(Message& m)
 at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
 at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
 at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
 
Loaded Assemblies **************
mscorlib
 Assembly Version: 2.0.0.0
 Win32 Version: 2.0.50727.4952 (win7RTMGDR.050727-4900)
 CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
 
BackOffice
 Assembly Version: 1.0.0.0
 Win32 Version: 1.0.0.0
 CodeBase: file:///C:/BO%20config%20removed/BackOffice.exe
 
System.Windows.Forms
 Assembly Version: 2.0.0.0
 Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
 CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
 
System
 Assembly Version: 2.0.0.0
 Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
 CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
 
System.Drawing
 Assembly Version: 2.0.0.0
 Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
 CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
 
CrystalDecisions.Windows.Forms
 Assembly Version: 13.0.2000.0
 Win32 Version: 13.0.1.220
 CodeBase: file:///C:/Windows/assembly/GAC_MSIL/CrystalDecisions.Windows.Forms/13.0.2000.0__692fbea5521e1304/CrystalDecisions.Windows.Forms.dll
 
CrystalDecisions.Shared
 Assembly Version: 13.0.2000.0
 Win32 Version: 13.0.1.220
 CodeBase: file:///C:/Windows/assembly/GAC_MSIL/CrystalDecisions.Shared/13.0.2000.0__692fbea5521e1304/CrystalDecisions.Shared.dll
 
CrystalDecisions.ReportSource
 Assembly Version: 13.0.2000.0
 Win32 Version: 13.0.1.220
 CodeBase: file:///C:/Windows/assembly/GAC_MSIL/CrystalDecisions.ReportSource/13.0.2000.0__692fbea5521e1304/CrystalDecisions.ReportSource.dll
 
JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
 
configuration 
 system.windows.forms jitDebugging="true" 
configuration 
 
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
 
end error text----
 
I am not using log4net in my windows application. As I know not directly. No log4net tag in config. Not even in publish file listing. 
I have Crystal Decisions.CrystalReports.Engine in my reference. 
 ReportSource 
 Shared 
 Windows.Forms 
 
I tried adding reference of log4net in my app and then tried deploying. slight modified error. Instead of not find the file it says not able to load and rest error part is same.
 
I have excluded all crystal dll from publish file list and tried.
 
I even updated cilent machine with Crystal Reports for VS2010 Redist 64 bit support pack 1.
 
I tried adding following in config but no result 
 startup useLegacyV2RuntimeActivationPolicy="true" 
 supportedRuntime version="v2.0.50727" 
 startup
and
 startup useLegacyV2RuntimeActivationPolicy="true" 
 supportedRuntime version="v4.0" 
 startup 
 
I found related to this in one of the thread. I am not sure but this could be the problem. what is the solution for it? 
In my development machine windows/assembly folder, there exist 2 log4net files 
Assembly Name - version - Processor Architect 
- log4net - 1.2.9.0 - blank 
- log4net - 1.2.10.0 - x86 
But in my client machine, there is only one log4net file. 
Assembly Name - version - Processor Architect 
- log4net - 1.2.10.0 - AMD64 
 
I have spend lot hours on it but no output. Any help or direction is appreciated. 
Thanks,
Edited by: Dhairya Tolat on Mar 21, 2011 8:13 PM

Hi deguri,
1. Are you going to sell the application(which embeds the crystal runtimes) to another company?
2. Is the application intended for users within your company?
If the answer to question 1 is a 'Yes', then you need to purchase the license.
If the answer to question 2 is a 'Yes', then you do not need the license.
Take a look at a question posted in response to the blog i referred to in my previous post. That is a typical scenario where license needs to be purchased.
We are product a client/server application in VS 2010 and would like to include Crystal Reports. The rendering/runtime would be on the server component. Our package is distributed to our clients and runs on their hardware. We would be producing the reports and shipping them with the software (i.e. no embedded designer).
Am I correct in understanding that we would need only a single SAP Developer Advantage license (~$2500 USD) and that would cover redistribution to all our our clients?
Thanks in advance!
CR for VS 2010 on Application Server
2011-06-15 14:18:50 Blair Wheadon Business Card [Reply]
Yes, you are correct.
I hope that clarifies things...
Deepu.

Report to show unmapped entries in MapID context

I'm using TCS2 in WinXP.
Robohelp v. 8.0.2.208
Is there a report that will show me any entries that are not mapped in terms of the context sensitive map ids? I found the reports that show the used MapIDs and broken topic mapIDs...
I need this report b/c I think that the mapID file doesn't update by itself, i.e. if you delete something that is tagged in a context sensitive mapID file it doesn't just un-assign and delete itself, you have to manually edit the map ID file, and then manually add any new items that need to be included in the mapID file.
Thanks!
Adriana

The Topic Properties report can be customised to include / exclude various things, including map ids.
If you delete a topic, the map id goes with it. Tagging excludes a topic from a build, it does not delete the topic from the project.
See www.grainge.org for RoboHelp and Authoring tips
Follow me @petergrainge

Mac App Store doesn't show OS X updates

Since I upgraded to Mountain Lion in July, the Mac App Store has stopped showing updates for OS X. It shows normal app updates like Evernote but it didn't notify me for the 10.8.1, the 10.8.2 and the recent Supplemental Update. This happens even after days that the updates are released. I discovered that there were updates available from news sites.
I contacted Apple Support but I was quite rudely shut up. The guy at the phone told me that "this is normal" and that Apple "is not obliged" to issue a notification for all the system updates. I told him that all my Mac-owners friends could download the updates from the App Store but he told me that "they were lying" to me. I was so aghast at his response that I didn't started laughing in his face as he probably deserved. I will find a way to get back to him via an official complaint to his superiors, that's for sure.
Can anyone help me with the Mac App Store issue, anyway? Currently I'm forced to download the updates manually from Apple's site.
Thanks in advance for the support!

It's possible you have a problem with your system. I've had this same issue with Lion. Eventually, I bit the bullet and did a scratch reinstallation which seemed to fix things. But there may have been less invasive solutions I just did not think of or find. So you might start with the following:
Boot into Safe Mode then restart normally.
Download a utility such as Mountain Lion Cache Cleaner and use to clear out user, system, and font caches. Restart is immediately required.
Reinstall OS X.
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Crystal Reports Cross-Tab Report not showing all available fields

I am running CR2008 against MS SQL Express. I have several tables with fields and data in them and can create standard reports to show all the data in all the fields. However, when I try to create a cross-tab report, only some of the fields appear for me to choose from.
I created a standard report with all the fields I needed in my cross-tab report and ran a preview. Everything was there. I then added a cross-tab object, selected the tables only to find that fields that are in the main report are not showing up for selection in the cross-tab.

UPDATE: I exported the entire database from MS SQLExpress to MS Access and I am having the same issues, so it does not appear to be a problem with the database engine and, since the standard tabular reports show the fields, I am at a loss as to why they don't show up in the cross-tab or the Parameter fields.
I am creating the cross-tab through the Cross-Tab wizard. Is there maybe a bug in that? Is there a way to create it otherwise?

Need report to show # of opportunities updated vs. number created

Similar Messages

Maybe you are looking for