Need somebody help me please !
i bought two unlocked iphones ( 4s) from dubai .......it was a normal store .(named dubai mall)......when i got back to egypt .and i tried to access the first one on vodafone network.. it gave me a message that the only supported carrier can activate it...i switched to another carrier by us (named itsalat) , i found it working ,,and when i put back vodafone micro sim....i find it is also working !!!!!!!!, concerning the other iphone ,unfortunatly neither vodafone nor itsalat is working on it!!!!!.............but the singal strngth is shown and also the 3G is shown up !!........how can i solve this problem to let it work properly......i can't even get into the home screen......it stops when he tries recognizing the carrier..!!!!!.......
That indicates it is locked to AT&T. If you don't have AT&T service, the phone is useless to you. AT&T will not unlock iPhones under any circumstances.
You purchased gray market phones, probably both from the US, possibly hacked. If you can, return them and get your money back.
Next time, buy iPhones from a legitimate source.
Similar Messages
-
I am new with iMac and I am trying to copy some file from my external HDD that a used with my PC but it does not let me also I can't delete anything from this HDD using the finder. Can somebody help me , please?
No, unfortunately, when you format a drive, it will erase all the contents. So you will need to find a temporary "storage" place to put the stuff using a PC so you have access to it. Then reformat using Disk Utility (Applications > Utilities). If only using with mac, format Mac OS Extended (Journaled) and use GUID Partition scheme under Partitions/Options. After formatting, you can drag the files back.
-
Can not run jcwde (Somebody help me please !)
Hi all, I'm a newbie in java card development.
Let's get to the point. I have some problem with jcwde and I've been searching for the similar problems in this forum such as : here here and here here
Other sources that I've referred to is : here and here
I'm trying to set environment variable for java card development.
Before running jcwde, i also run samples_build.bat but I don't know whether it OK or not.
When I try to run jcwde for testing demo file (I type : jcwde -jcwde.app in command prompt) the only message that i got is :
C:\java_card_kit-2_1_2\samples\src\demo>jcwde jcwde.app
'C:\Program' is not recognized as an internal or external command, operable program or batch files
Is there any problem with my enviromnent variables setting ? since I'm not sure how to fix it
here is mine :
JAVA_HOME : C:\Program Files\Java\jdk1.5.0_04
JC21_HOME : C:\java_card_kit-2_1_2
CLASSPATH : .;C:\java_card_kit-2_1_2\lib\api21.jar
PATH : C:\Program Files\Java\jdk1.5.0_04\bin;C:\java_card_kit-2_1_2\bin
Oh yeah, I almost forgotten that I'm using Windows XP Professional Edition SP 1, and Java Card Development Kit 2.1.2
Can somebody help me please or maybe give me advice about what I'm doing is right or wrong ?
Thanks in advance,
Best Regards,
iCH1
Edited by: ichiwan on Mar 12, 2008 10:00 PMdear kicklee,
Thank you for your response to the topic. By the way, do you mean that all CLASSPATH variable must not be more than 8 characters ?
I just did it, but still the same error occur.
Is there any solution for this ?
I need you to copy-paste all your succesfull CLASSPATH configuration here for better explanation.
thx in advance.
Best Regards,
iCH1
Edited by: ichiwan on Mar 18, 2008 8:09 AM
Edited by: ichiwan on Mar 18, 2008 8:13 AM
Edited by: ichiwan on Mar 18, 2008 8:15 AM -
hello..!!! i cant enter to iTunes store in my Windows 7 why??? somebody help me please :S
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now. -
I have a problem with my iphone 4S. I cant connect to wifi a week ago. Can somebody help me please?
I have tried everything but my iphone continue without connected.
Thanks.Hello.
My iphone doesn't recognize any signal wifi.
I have rebooted the red options as indicated on apple portal.
Also, I have turned off my iphone and when I turn it on don't enable the wifi option, and then I have to turn it off and turn it on again.
I have restored to the factory settings but the problem continues.
I don't know anything else to do.
Regards, -
Hey I have a movie that plays on AVI format but my laptop is not reading it. it says that is missing a codec and cannot be read. can somebody help me please
Luigi1990 wrote:
Hey I have a movie that plays on AVI format but my laptop is not reading it. it says that is missing a codec and cannot be read. can somebody help me please
Try installing VLC Player for Mac
http://www.videolan.org/vlc/download-macosx.html
Cheers
Pete -
Hi i got the teacher student plan in october for 1 year but now appears as expired, can somebody help me please?
Hi there,
Subscription was expired due to non payment for the month of March. I see the new card has been updated in the system and the subscription would be up & running in sometime.
Note: Since subscription was not charged for the month of March, once the subscription is activated you will be charged for the month of March also.
^Ani -
My iphone 4s is not charging using wall charger. I can only charge it through my laptop and a desktop. I tried so many chargers already but it is still the same. Can somebody help me please...
My current ios is 6.1.3
I tried so many chargers thinking that my wall charger is defective. But still my phone is not charging. Its always through laptop and desktop only that i can do charging...help me please....
Thank youHello Regina0117
If you already try other chargers and still not working, the best advise is for you to contact apple support, if you still in warranty they will change it for you for free.
Start you case here:
http://www.apple.com/support/contact/
And contact apple support
Cheers, Lima -
PID multivariable SOMEBODY HELP! PLEASE!
Hello everyone!, i´m here because i need your help.... yes...your help.... why?. because i´m working with a classmate in our tesis, wich is "Dinamic control of a distillator tower" well.. at this point we have created the VI, we are conscient that isn´t pretty well but... it works... how it works?
1- We are distilling a mixture of Ethanol and Water, receiving the Concentration of the distillate and also all the temperatures in the tower, controlling the value of the Heater(Power) and the Flux of the partial Condenser.... So... that´s all..
BUT... now we need to set a value of the Alcohol Concentration, for example 80° set it and see how the sistem regulate the Flux of condenser and Heater Power, by the way... Separated, one of another, it´s not necesary that bouth to be working at the same time:
Alcohol concentration--->PID( SET POINT)---->controlle Flux of condenser--_> Produce a change in our Concentration--> PID--->....
Alcohol concentration--->PID( SET POINT)---->Heater Power--_> Produce a change in our Concentration--> PID--->....
We tried searching for some example... but... it wasn´t successful... i mean... how do we conect the out put of the PID? it is possible to do this if we need to work with one or another variable?( Condenser Flux or Heater)
Here i attach our VI, how i said... i started putting the PID EXAMPLE... and then i clearly saw that.... OH MY GOODNESS this is so difficult..
HOPE SOMEBODY HELP US. we would be very grateful
Felipe Kim V
Nicolas Paniagua G
Attachments:
Distillation HELP!.vi 315 KBHello nathand! well... i´m gonna try to explain it... in a better way... sorry for my english by the way..
We need to control the alcohol concentration of a mixture(Ethanol-Water) controlling two variables: Heater Power and Flux of condenser(with a bomb), but separated you know what i mean, for example:
in the first case:
We need a mixture of 80% alcohol.. So... we should start the distillation... put it as a Set point 80% and wait till the system(PID) reaches the desired value( usin the Heater power as variable)
Sexond case:
We need the same mixture of 80% alcohol.. So... we should start the distillation... put it as a Set point 80% and wait till the system(PID) reaches the desired value( usin the Flux of condenser, controlled with a bomb, as variable)
That´s all, i mean, bouth are Simple Closed loop´s, but... at this point wa have no idea of how to do that, we are studying chemical engineering and this is for our Tesis.
and... when i mencioned the "red flashing light" i was talking about the Red circle, the Stop button, wich start´s to blinking, what else?... i dont know how to show the entire program, we have that problem too when we try to see all of it, it´s pretty umcomfortable.
So....I dont´t know if we can program it bouth in a VI or separated in two VI´S
If you could help us, it would be awesome, we would be so much greatful
Please Nathand help us!
Regards
Felipe Kim Vallejos
Nicolas Paniagua G -
Somebody help me please!!!
My BlackBerry Curve 8250 drained early hours yerterday morning and ive had it on charge ever since and it still hasnt turned on, i have " batteries that have drained and dont no how to get them working again, please can somebody explain how to get my phone up and running again
Do a simple reboot on the BlackBerry in this manner:
With the BlackBerry device POWERED ON, remove the battery for a minute, and then reinsert the battery to reboot. A reboot in this manner is prescirbed for most gltiches and operating system errors, and you will lose no data on the device doing this.
Now, try your Call Logs again.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
My connection times out everytime the installation for the software update is complete. I have tried multiple times ans still the same thing happens. Can somebosy help me please?
Yes it does matter whether you're doing an update or an upgrade. To find out which, under the Apple menu, select About this Mac. It will tell you which OS you currently have installed. Since it didn't come originally with OS 10.9, if About this Mac says it's 10.7.X or 10.8.X, you'll need to go to the Apple App Store program and download Mavericks (which is Mac OS X 10.9) and run the installer. If it does say you have 10.9, see if it says 10.9.1, since you might have Software Update set to install updates automatically. Otherwise, are you running Software Update and that's when the circle is spinning constantly?
BTW, are you sure you want to upgrade to Mavericks (if that's what you're doing)? Check on the Mavericks forum to see the problems users are having with it. -
but when I do nothing happens. Can somebody help me please
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software. -
i have an ipod touch 4th gen. it cant connect to itunes, apps store? ive tried rebooting, system restore, even erase all my apps.. can sombody help me please...
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors | iPad Insight
Can't connect to the iTunes Store
Does Safari work?
Have you tried when connected to another network?
have you restored to factory settings/new iPod? -
Somebody help.. I don't get what's going on. This didn't happen in the beginning, it was completely fine with watching full screen videos, but now it seems to "glitch" now and then and appear slow and laggy. whattttt
If the computer seems normal except for watching youtube the problem is probably between you and your ISP or between the ISP and youtube. If your computer seems slow no matter what you are doing try restarting your computer and see if that helps. (If so pay attention to your Page Outs in the Activity Monitor and also how much free space your hard drive has.)
-
I bought a $15 itunes voucher and redeemed it. I want to buy a $14.99 book. Now itunes says i have insuffient funds. Can somebody help me please
What country are you in ? If you are in the US then you quite possibly have to add your state's sales tax onto the listed price.
Maybe you are looking for
-
IPod not Recognised by Latest Update in Windows 8.1/64 bit .
Howdy, I am using Windows 8.1 / 64 bit, have updated the iTunes to the most recent verision (11.1) My computer says it ""doesn't recognise the iPod "" When I re-instal iTunes, it still says the same. I go to the left hand side to authorise the iPod
-
Maximum hard drive on Portege M200
I've recently bought a Portege M200 on ebay and I'm thinking of installing a new 250GB IDE hard drive. Is there a maximum hard drive size for this model?
-
My ipod touch 64G doesnt allow me to do anything in my music app. I cant even play music or select anything. But I can use all other apps. How do I fix this??? PLS Help me:(
-
Well I have a digital camera that records movies with sound, but when I try to import them into iMovie they end up with no sound. The help manual says that MPEGs wont work with sound in iMovie. So I was wondering, is there anyway to convert my MPEG m
-
DB LINK Problem in Designer 2000 ver 2.0
Hi, Description: I have re-engineered a database into designer. The database name say is TEST. I have created another database called say TEST2 in TEST2 I have created a snapshot definition from one of the tables re-engineered from TEST. Problem: As