Need the IP address of a scheduled job

I'm calling the API of one of my vendors via an HTTP Get scheduled job on Azure. My vendor is going to start blocking any request to their API from an Azure IP address. However, they can whitelist specific IP addresses, but I don't see an IP
address associated with my scheduled job. How can I obtain the IP address for the job?
Thanks,
Mike

Azure scheduler reserved IP adress is not supported at this time.
You can assign reserved IP to VMs and services, but not to scheduler.
Also assigning reserved IP must be done when creating service, it can't be changed later.
Mustafa Toroman

Similar Messages

I have a brand new MacBook Pro . I am trying to connect to the private wifi at my house but I need the IP address of my laptop . Everywhere I go on the laptop, the IP address is blank . How do I find the IP address if laptop is not connected to the wifi

I have a brand new MacBook Pro and I'm trying to connect to the private wifi at my house however, I need the IP address. Everywhere I go to find it, the adress is blank. What do I do ?

Your Mac won't have an IP address, at least not a valid IP, until you actually connect it to your home LAN. Not sure why you think you need the IP, you don't.
To connect to your home WiFi you need to know the SSID name, IE the name of your home WiFi, and the password for it. Once you have those two things click the little antenna looking icon on the right side of the menu bar and select your home WiFi name and click connect. A dialog box will pop up asking for the password, type in the password and click OK/Connect/Whatever.

Bluetooth dongle license that needs the device address

PLEASE HELP ME
I have just bought the MSI BToes Bluetooth Dongle and when i tried to install it, it kept saying that the device cannot be found, i downloaded the latest driver and software and that installed it fine. But it asked for the serial number on the dongle but i do not have one. I went to the WIDCOMM website and it asked for the device address, but i cannot gather mine because the software that i need is not installed because it needs the serial number, and the serial number needs the device address
Can you please help me get out of the never ending circle, PLEASE
Thanks
Ben Evens (Ben13muk)

I take it you mean the Physical Address of the BToes dongle yer? if so i have got that but i can't find where to get the lisence from on the Widcomm site :(
Can some kind soul show me the way
ta
Class

I need the actual address of the Mozilla start page. It is not the default in my Firefox options.

I am trying to convert to the Mozilla (Firefox) start page for my home page. I cannot follow the instructions given because my default home page in options is Yahoo. (I don't want that.) Can you give me the address of the Start page? I know how to make it my home page after I have navigated there.

Hello mclapp, type in the awesome/location bar '''about:home''' .
and set '''about:home''' in Firefox button > Options > General > Strtup > Home page.
be sure you have also set When Firefox starts > Show my home page
thank you

What is the best way to export a .csv/.txt file to a MS Windows shared folder via a scheduled job?

What is the best way to export a .csv/.txt file to a MS Windows shared folder, when the export process is a scheduled job?

You can't directly, as scheduled jobs can only export to server-side data stores, which can only write to the landing area. You'll need to use an external script (e.g. batch file) to move the file from the landingarea after export. You can use an external task in the scheduled job to invoke the script.
regards,
Nick

Changing the job priority of scheduled job

Hi gurus,
Please let me know how to change the priority of a already scheduled job.I mean to say if a job is scheduled with priority A,now i want to change it to some B or C .How can i do that.Please guide in step wise.....
Thanks in advance.
Regards,
Rakesh.

A little tip which might help you in future: If the user only has the authority for object S_BTCH_JOB and not S_BTCH_ADM... then they will only ever be able to schedule class "C" jobs.
When you trace or debug SM37, do not be mislead by the check on S_BTCH_ADM... the user does not need it with the correct S_BTCH_JOB authority. It is only being checked to over-ride the S_BTCH_JOB authority for admins!
Cheers,
Julius

How to stop a scheduled job using OMB*Plus ?

Hello everyone,
I use a OMB*Plus script to deploy a project in various environments. This includes scheduled jobs.
In this context, I need to stop the schedules of the previous versions to avoid a script crash.
I found the OMBSTOP command thad could do, but I need to retrieve the job ID of the schedule I want to stop. And I don't know how to get the Job ID.
I could get it from a previous launch and save it somewhere, but it wouldn't work if the schedule was manually stopped and restarted. Maybe is there a command that lists the running / scheduled jobs and their IDs? I didn't find it.
Thanks in advance for your help.
Cedric.

Frankly, I cannot see where this is available via pure OMB+, however you could back-door it if if you can figure out how to get these values from the public views (I would guess from the "Scheduling Views" section at http://download-east.oracle.com/docs/cd/B31080_01/doc/owb.102/b28225/toc.htm).
Then you could use my SQL library from OMB+ to get these values and stop the schedules before deploying. you can save this file as omb_sql_library.tcl and then just "source /path/to/omb_sql_library.tcl in your own script to make the functions available in your script.
{code}
package require java
# PVCS Version Information
#/* $Workfile: omb_sql_library.tcl $ $Revision: 1.0 $ */
#/* $Author: $
#/* $Date: 03 Apr 2008 13:43:34 $ */
proc oracleConnect { serverName databaseName portNumber username password } {
# import required classes
java::import java.sql.Connection
java::import java.sql.DriverManager
java::import java.sql.ResultSet
java::import java.sql.SQLWarning
java::import java.sql.Statement
java::import java.sql.CallableStatement
java::import java.sql.ResultSetMetaData
java::import java.sql.DatabaseMetaData
java::import java.sql.Types
java::import oracle.jdbc.OracleDatabaseMetaData
# load database driver .
java::call Class forName oracle.jdbc.OracleDriver
# set the connection url.
append url jdbc:oracle:thin
append url :
append url $username
append url /
append url $password
append url "@"
append url $serverName
append url :
append url $portNumber
append url :
append url $databaseName
set oraConnection [ java::call DriverManager getConnection $url ]
set oraDatabaseMetaData [ $oraConnection getMetaData ]
set oraDatabaseVersion [ $oraDatabaseMetaData getDatabaseProductVersion ]
puts "Connected to: $url"
puts "$oraDatabaseVersion"
return $oraConnection
proc oracleDisconnect { oraConnect } {
$oraConnect close
proc oraJDBCType { oraType } {
#translation of JDBC types as defined in XOPEN interface
set rv "NUMBER"
switch $oraType {
"0" {set rv "NULL"}
"1" {set rv "CHAR"}
"2" {set rv "NUMBER"}
"3" {set rv "DECIMAL"}
"4" {set rv "INTEGER"}
"5" {set rv "SMALLINT"}
"6" {set rv "FLOAT"}
"7" {set rv "REAL"}
"8" {set rv "DOUBLE"}
"12" {set rv "VARCHAR"}
"16" {set rv "BOOLEAN"}
"91" {set rv "DATE"}
"92" {set rv "TIME"}
"93" {set rv "TIMESTAMP"}
default {set rv "OBJECT"}
return $rv
proc oracleQuery { oraConnect oraQuery } {
set oraStatement [ $oraConnect createStatement ]
set oraResults [ $oraStatement executeQuery $oraQuery ]
# The following metadata dump is not required, but will be a helpfull sort of thing
# if ever want to really build an abstraction layer
set oraResultsMetaData [ $oraResults getMetaData ]
set columnCount [ $oraResultsMetaData getColumnCount ]
set i 1
#puts "ResultSet Metadata:"
while { $i <= $columnCount} {
set fname [ $oraResultsMetaData getColumnName $i]
set ftype [oraJDBCType [ $oraResultsMetaData getColumnType $i]]
#puts "Output Field $i Name: $fname Type: $ftype"
incr i
# end of metadata dump
return $oraResults
# SAMPLE CODE to run a quick query and dump the results. #
#set oraConn [ oracleConnect myserver orcl 1555 scott tiger ]
#set oraRs [ oracleQuery $oraConn "select name, count(*) numlines from user_source group by name" ]
#for each row in the result set
#while {[$oraRs next]} {
#grab the field values
# set procName [$oraRs getString name]
# set procCount [$oraRs getInt numlines]
# puts "Program unit $procName comprises $procCount lines"
#$oraRs close
#oracleDisconnect $oraConn
{code}
So you would want to connect to the control center, query for scheduled jobs, stop them, and then continue on with your deployment. I assume that you also need to pause and check that an scheduled job in mid-run has time to exit before moving ahead. You could do a sleep loop querying against system tables looking for active sessions running mappings and waiting until they are all done or something if you really want to bulletproof the process.
Hope this helps,
Mike

Capture DDL for Oracle Scheduled Jobs and job from DBMA_JOBS

I have trying at this for while and now I am stuck...so I need some help or advice.
I am doing a DB migration and I need to capture the DDL for all Oracle Scheduled Jobs as well as DBMS_JOBS. Anyone have a good way?
I took a datapump export last week. Can I run a impdp and capture the DDL for this VIA the sqlfile parameter? If so, how? What would be the script for it. Something like this maybe (par file)?
directory=DP_IMPORT
DUMPFILE=dump1.dmp
SCHEMAS=A,B,C...X,Y,Z
LOGFILE=JOBS.LOG
EXCLUDE=TABLE,INDEX,CONSTRAINT
PARALLEL=4
INCLUDE=JOBS
????

Hello,
It's JOB, see following table for possible options , I recommend you to read throught this thoroughly before starting.
http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/d_metada.htm#BGBIEDIA
Regards

Oracle schedule jobs

Hi Gurus,
I need to learn more about Oracle schedule jobs, how they are configured, how they are created/deleted/stopped/started etc. Do you have some articles/books etc.
Also very importantly we are migrating from 9i to 11g. And we have some schedule jobs in 9i. When the DB is imported from 9i to 11g, what additional steps do I need to do to schedule them Ok in the new DB.
Thanks
Amitava.

hi
you can use dbms_job package to creating,deleting and stopping job and please refer to below link
http://docs.oracle.com/cd/B19306_01/appdev.102/b14258/d_job.htm
yasin

How can I delete my Icloud account when I don't know the password and no longer have the email address associated with it?

How can I delete my Icloud account when I don't know the password and no longer have the email address associated with it?
You need your password to delete it and I need the email address to reset the password. I feel like I'm going in circles!!! Please help!!!

Go to https//appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Tap edit next to the primary email account, tap Edit, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address (you shouldn't need to verify the old account). You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

How do i find the email address that my redemption code is attached to?

Hello My name is Yakira and I'm a fashion design student. My school sent out emails that had links for students to follow in order to download a free copy of Adobe Suite. I followed the instructions and Creative Cloud only allows me to use TRIAL versions of the software.
I just got off Technical Support with my school and they informed me that the email address that is attached to my redemption code is different than the email address I used to download the software in the first place.
The reason for that is because my school was recently bought by another company and the overall email address that was used with the Adobe account is not the same one that out campus uses now. Instead of telling students to use the older email address a lot of students are confused as to why they cannot access their Adobe Suite
So I have the Redemption code but I need the email address that the redemption code is linked to so that I can download everything again.
Hope my explanation was not that confusing.
Regards,
Yakira

Moving this discussion to the Adobe Creative Cloud forum.

Scheduled Job to gather stats for multiple tables - Oracle 11.2.0.1.0

Hi,
My Oracle DB Version is:
BANNER Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
In our application, we have users uploading files resulting in insert of records into a table. file could contain records ranging from 10000 to 1 million records.
I have written a procedure to bulk insert these records into this table using limit clause. After the insert, i noticed my queries run slow against these tables if huge files are uploaded simultaneously. After gathering stats, the cost reduces and the queries executed faster.
We have 2 such tables which grow based on user file uploads. I would like to schedule a job to gather stats during a non peak hour apart from the nightly automated oracle job for these two tables.
Is there a better way to do this?
I plan to execute the below procedure as a scheduled job using DBMS_SCHEDULER.
--Procedure
create or replace
PROCEDURE p_manual_gather_table_stats AS
TYPE ttab
IS
    TABLE OF VARCHAR2(30) INDEX BY PLS_INTEGER;
    ltab ttab;
BEGIN
    ltab(1) := 'TAB1';
    ltab(2) := 'TAB2';
    FOR i IN ltab.first .. ltab.last
    LOOP
        dbms_stats.gather_table_stats(ownname => USER, tabname => ltab(i) , estimate_percent => dbms_stats.auto_sample_size,
        method_opt => 'for all indexed columns size auto', degree =>
        dbms_stats.auto_degree ,CASCADE => TRUE );
    END LOOP;
END p_manual_gather_table_stats;
--Scheduled Job
BEGIN
    -- Job defined entirely by the CREATE JOB procedure.
    DBMS_SCHEDULER.create_job ( job_name => 'MANUAL_GATHER_TABLE_STATS',
    job_type => 'PLSQL_BLOCK',
    job_action => 'BEGIN p_manual_gather_table_stats; END;',
    start_date => SYSTIMESTAMP,
    repeat_interval => 'FREQ=DAILY; BYHOUR=12;BYMINUTE=45;BYSECOND=0',
    end_date => NULL,
    enabled => TRUE,
    comments => 'Job to manually gather stats for tables: TAB1,TAB2. Runs at 12:45 Daily.');
END;Thanks,
Somiya

The question was, is there a better way, and you partly answered it.
Somiya, you have to be sure the queries have appropriate statistics when the queries are being run. In addition, if the queries are being run while data is being loaded, that is going to slow things down regardless, for several possible reasons, such as resource contention, inappropriate statistics, and having to maintain a read consistent view for each query.
The default collection job decides for each table based on changes it perceives in the data. You probably don't want the default collection job to deal with those tables. You probably do want to do what Dan suggested with the statistics. But it's hard to tell from your description. Is the data volume and distribution volatile? You surely want representative statistics available when each query is started. You may want to use all the plan stability features available to tell the optimizer to do the right thing (see for example http://jonathanlewis.wordpress.com/2011/01/12/fake-baselines/ ). You may want to just give up and use dynamic sampling, I don't know, entire books, blogs and papers have been written on the subject. It's sufficiently advanced technology to appear as magic.

Does anyone know the street address for Apple's repair center in Memphis, TN? I sent my 2010 MBP for display problems but didnt write down the FedEx tracking number.

I was an idiot and lost the tracking number for my package that was goin to Memphis to be fixed and of course the package supposedly still hasn't arrived after being sent 3 day ago an was overnighted. I'm pretty sure it's goin to Flextronics but for FedEx to track it they need the street address. All I have is the zip code of 38134. Thanks for the help.

Flextronics:::
5200 Tradeport Drive Memphis, TN 38141
(901) 215-2800

Reading the ethernet address without root permissions

Hello,
Is there a way to get the ethernet address of a network interface without root permissions (in a user program)?
I need the mac address in order to generate DCE's uuids. The mac address is used as a unique machine identifier.
Serge

HI
You may use this program copied from a technote 2856-09 to get MAC address in C. Works fine only if arp cache is present though . It
does not talk to the driver directly . May be usefull to you. Compile
with "-lsocket -lnsl" flags.
<pre>
#include <stdio.h>
#include <sys/types.h>
#include <sys/sockio.h>
#include <sys/socket.h>
#include <net/if.h>
#include <net/if_arp.h>
#include <netinet/in.h>
#include <arpa/inet.h>
#include <netdb.h>
#include <errno.h>
main(argc, argv)
int argc;
char *argv[];
int sockfd, i;
struct arpreq arpreq;
struct sockaddr_in *sin;
struct hostent *hp;
char host[256];
if(argc != 2)
printf("Usage : %s hostname\n", argv[0]), exit(1);
strcpy(host, argv[1]);
bzero(&arpreq, sizeof(struct arpreq));
arpreq.arp_pa.sa_family = AF_INET;
sin = (struct sockaddr_in *)&arpreq.arp_pa;
sin->sin_family = AF_INET;
sin->sin_addr.s_addr = inet_addr(host);
if (sin->sin_addr.s_addr == -1) {
hp = gethostbyname(host);
if (hp == NULL) {
fprintf(stderr, "%s: %s: unknown host\n",
argv[0], host);
exit(1);
bcopy((char *)hp->h_addr, (char *)&sin->sin_addr,
sizeof
(sin->sin_addr));
if ( (sockfd = socket(AF_INET, SOCK_DGRAM, 0)) < 0 )
perror("can't open datagram socket");
if (ioctl(sockfd, SIOCGARP, (caddr_t)&arpreq) < 0)
if (errno == ENXIO)
printf("%s (%s) -- no entry\n",
host, inet_ntoa(sin->sin_addr));
else
perror("SIOCGARP IOCTL failed");
exit(1);
printf("Hostname : %s", host);
for (i=0; i<6; i++)
printf("%c%x", i == 0 ? '\t': ':', (unsigned
char)arpreq.arp_ha.sa_data);
printf("\n");
close(sockfd);
exit(0);
</pre>

Getting the MAC address of the iPhone

Hi,
In order for an iPhone (or any other network device) to access or wi-fi network, it needs to be registered. I would like to make it so that they don't have to register it every time and to do that, I need the MAC address of the device. Users will be registering via a webpage using the browser on the phone. Is there any way in the midst of that process that I can query the iPhone for it's Mac address?
Thanks,
Rob Tanner
Linfield College

You can get the MAC address for your iPhone at Settings > General > About > Wi-Fi address.
There is not a way to query the iPhone for the MAC address to be entered automatically in the space provided when registering the iPhone's MAC address via the webpage, but it can be written down in advance for manual entry of the address.

Need the IP address of a scheduled job

Similar Messages

Maybe you are looking for