Need to change forecast data thru planning book + doubt while creating POS

hi friends,
my application creates forecast data for following.
product , location start date , end date.
i need to put this data into APO(DP).
i know i can do it using BAPI CHANGEKEYFIGUREVALUE2 of Planning Book APs
my doubt is while create a Plng Object store, what fileds do i take as charachteristics which match these, please reply if have some clue

Hi Rohit,
I believe i misunderstood your first post. I had given the BAPI parameters that you need to fill up for the given business requirements you have mentioned. I realized you were asking about the POS.
Answer to Q1: You can not place time characteristics in the POS. You will define the "time characteristics" in your Planning Area by specifying a relevant storage bucket profile.
Answer to Q2: You dont need to add time characteristics in the POS.
Answer to Q3: 9AVERSION is not included in the POS. However, when you use BAPIs BAPI_PBSRVAPS_GETDETAIL and BAPI_PBSRVAPS_CHANGEKEYFIGVAL to read/write data from/to the planning area you need to supply a selection for the planning version (9AVERSION).
Hope this helps.

Similar Messages

Excel upload data to planning book not working

Hello Gurus,
i have checked the online resources first before posting this thread here as this is most old topic relating to upload of excel data to planning book key figures.
Here is what i have done so far
1) from the planning book, i chose a view and downloaded the file to desktop and saved it as CSV. i populated the key figure values and saved the csv file as-is back to desktop
2) i had to remove the hdeader from the file as APO threw back an error that it could not interpret the period (header) as the number
3) when i took out the header i simply pasted the values and the file was ok
4) i went to planning book, loaded the file, checked the file and it said that the data was read and i clicked on upload the file
5) everything was green, then but i do not see the values in the grid of the planning book
what else i'm missing.
can someone please help me
thanks
Ravi

Hello DB and Ada. Thank you for your valuable suggestions. I know i might be missing something silly here. If i keep the header that i downloaded from the planning book into csv file, i get an error while uploading the file back to planning book that unable to interpret 11/2014 as a number.
P11/2014 is the header, Period 11/2014 is the fiscal period. we plan in fiscal periods.
if i take out the header from the csv file and just populate the key figure values, then i do not get any error when i load the file back to planning book, but then the values do not show up in the planning book grid.
i'm keeping the planning book in the change mode while uploading the file as i got that error saying that i need to keep the planning book in change mode for the file to load data properly to planning book.
Thanks
Ravi

How to extract data from planning book

nu t apo. need help regarding how to extract data from planning book givn the planning book name , view name & some key figures.
Total Demand (Key Figure DMDTO):
o     Forecast
o     Sales Order
o     Distribution Demand (Planned)
o     Distribution Demand (Confirmed)
o     Distribution Demand (TLB-Confirmed)
o     Dependent Demand
Total Receipts (Key Figure RECTO):
o     Distribution Receipt (Planned)
o     Distribution Receipt (Confirmed)
o     Distribution Receipt (TLB-Confirmed)
o     In-Transit
o     Production (Planned)
o     Production (Confirmed)
o     Manufacture of Co-Products
Stock on Hand (Key Figure STOCK):
o     Stock on Hand (Excluding Blocked stock)
o     Stock on Hand (Including Blocked stock)
In-Transit Inventory (Cross-company stock transfers)
Work-in-progress (Planned orders / Process orders with start date in one period and finish date in another period)
Production (Planned), Production (Confirmed) and Distribution Receipt elements need to be converted based on Goods Receipt date for projected inventory calculation.

Hello Debadrita,
Function Module BAPI_PBSRVAPS_GETDETAIL2 or BAPI_PBSRVAPS_GETDETAIL can help you.
For BAPI BAPI_PBSRVAPS_GETDETAIL, the parameters are:
1) PLANNINGBOOK - the name of your planning book
2) DATA_VIEW - name of your data view
3) KEY_FIGURE_SELECTION - list of key figures you want to read
4) SELECTION - selection parameters which describe the attributes of the data you want to read (e.g. the category or brand). This is basically a list of characteristics and characteristic values.
BAPI_PBSRVAPS_GETDETAIL2 is very similar to BAPI_PBSRVAPS_GETDETAI but is only available from SCM 4.1 onwards.
For the complete list of parameters, you can go to transaction SE37, enter the function module names above and check out the documentation.
Please post again if you have questions.
Hope this helps.

Error -- While Uploading Data into Planning Book

Hi all...
working on SCM 4.1...
In Planning book...while loading the data of one SKU-Location into the PB , i am getting the below error...
"Overflow during propagation calculation: Number too large"
Message no. /SAPAPO/OM_TS078
Diagnosis
An overflow occurred while propagating a change to a key figure within the LCA routine.
In this case an internal error in the LCA routine is concerned.
*ProcedureCreate an OSS message as detailed in SAP Note 167280.*
can anybody help me to resolve the same as i couldnot ablt to view the data in planning book for one of the Product-location.
Regards,
Rajesh Patil

Hi Senthil,
For Some of the SKUs it is giving the Error , some abrupt values are stored in Live Cache for these SKUs(CVC), thats why it giving the Error.
The only solution is ..i have to delete the CVCs and create new one...
But i will loose the data as we cant take the Backup of Old CVC data --> Giving COM Error
The reason of Abrupt Values in Live Cache Could Be -->.>
Macro/Alerts
How can we fix these types of Error , as regularly i am getting these Error??
Is there any Note/Patch to overcome this issue?
Will be GR8 if i will get the solution..
Regards,
Rajesh Patil

Need to change the date of joining of employee

Hi All,
I have gone through some threads similar to this subject an also tried to do changes from PA41 but i am facing some problems during the procedure.
We have transferred some employees to sap system with their original date of joining and payroll was run from some other date for those employees. So i need to change the date of joining of those employees.
For example : Below is the line items of one employee from table infotype 0.
End date Start date Changed on
22.02.2009 19.02.2007 19.02.2009
31.03.2009 23.02.2009 19.02.2009
31.12.2009 01.04.2009 14.10.2009
31.12.9999 01.01.2010 21.01.2010
Payroll was run from Feb-09 onwards and i want put date of joining for this employee as 23.02.2009.
I want to know which date i need to change??...When i am trying to change the first start date i.e. 19.02.2007 to my desired start date, but it is not allowing me to do that as end date is smaller.
Please tell me how would i change the joining date of employee as 23.02.2009 ?.
Thanks.

Try this
22.02.2009 19.02.2007
31.03.2009 23.02.2009
31.12.2009 01.04.2009
31.12.9999 01.01.2010   take this record form PA30 IT0000 Over View (Shif + F8) Copy that record and change the Start date
as 2302.2010 so another record will be created
22.02.2010    01.01.2010
31.12.9999    23.02.2010
Just try and let me know

Need to change delivery date in purchase order when it is created by ME59

Hi Gurus,
Purchase orders are created using Transaction ME59 where we give the Purchase Requistion. The delivery date in the PO will be same as the delivery date of PR. According to my requirement i need to change the date of PO while the time of its creation. could you please suggest me all the user exits to do this...

Check with badi ME_PROCESS_PO_CUST method PROCESS_HEADER - method SET_DATA

Forecast in SNP planning book

Hi,
I have released the forecast from DP to SNP. when i check that forecast in SNP planning book, i am not able to see any forecast in SNP planningbook. I have tried other Time bucket profile id but still i cant see forecast in planning book.
if anyone can give advice on this?
Thanks
Regards
Jignesh.

Hi Jignesh,
You have to edit the category group associated with the keyfigure you are looking at.
The Tcode for the same is MSDP_admin. where you have to select the planning area and the key figures and have to check the categories added to the category group associated. the categories can be checked in the SPRO,
Hope this solves your problem,
Regards,
manjit

In JDBC Sender Adapter , the server is Microsoft SQL .I need to pass current date as the input column while Executing stored procedure, which will get me 10 Output Columns. Kindly suggest me the SQL Query String

In JDBC Sender Adapter , the server is Microsoft SQL .I need to pass current date as the input column while Executing stored procedure, which will get me 10 Output Columns. Kindly suggest me the SQL Query String , for executing the Stored Procedure with Current date as the input .

Hi Srinath,
The below blog might be useful
http://scn.sap.com/community/pi-and-soa-middleware/blog/2013/03/06/executing-stored-procedure-from-sender-adapter-in-sap-pi-71
PI/XI: Sender JDBC adapter for Oracle stored procedures in 5 days
regards,
Harish

Actual & planned costs calculated while creating Plant Maintenance Order

Hi All,
I would like to know how the actual & planned costs calculated while creating Plant Maintenance Order (PM Order)
Thanks,
Ajay

You need to create an activity rate for 2014 for cost centre 51260201 and activity type NAHG20.
This can be done via transaction KP26, but is usually performed by your Finance team.
PeteA

Dynamic update of Planning Start Date in Planning Book

Hello.
Has anyone ever created a program to update the Planning Start Date of a Planning Book dynamically to the next Friday of the month for example?
The help information available for this field mentions a PDATE userexit, but I can not find it. Has anyone ever used it and has some examples to share?
Many thanks.
Aline Passos

Hi there,
I have never done this earlier. However i know that planning start date is stored in table /SAPAPO/PBDVWHDR-TBID_START. I tried changing this entry in the table and it correctly updated the dataview plannig start date.
So you may write a small program to update this field and it shall update the dataview.
Please let me know if this helps you.

Task list , Mtc plan staratagy change & Key date weekly plan?

Dear
I dont think as a std SAP transactions will allow my below req.
1. I have created task list mtc stratagy as XXX. but i need to change as YYY.
2. The same mentioned above for MTc plan
3. I would like call the Mtc order on key date
Example Pump has weekly, monthly tasks.
1. Weekly schdules i need for every month 1st, 8th, 15th,22th no need 29th .
2. We can call the monthly ops thro Key date . Here if i have mentioned in stratagy as 28 days instead of 30 days it will call?
Pls any one have the soln
Thanks
Thenna

hi
i think it is not possible to change the maintenance strategy once assinged to task list,other option just try in the task list select the operation and select the maintenace package ,here delesect all the maintenance package alloted and then try to change it
regards
thyagarajan

Need to change report data source on reports in a copied universe

We are setting up a new testing environment. So I made a copy of our BO universe so we could have two different testing universes. I then created a copy of the data source database that will be used as the data source for the reports in the copied universe. The two different databases have the exact same tables, columns and indexes as the development database. The only difference will be the data inside the tables.
I now need to change the reports to use the new universe since the reports were written using the universe instead of using the database. I am not changing anything else in the reports. I just need them to run against a different Oracle database.
So I go into Crystal Reports version 11.5.0.313 and open the report up. I then go into Database fields in Field Explorer to change the data source. I then go to the Set Datasource Location screen. I open up the universe label by clicking on the plus sign and I select the copied universe. When I do that, the Business Objects Query panel screen opens up. Because I have switched universes, Crystal Reports wants me to reselect the columns and rebuild the query.
We have over three thousand reports so we are trying to avoid rebuilding them. I am looking for a better way to change what database a report runs against.
Note: All of the reports will be run ion demand. Nothing will be scheduled.
Any suggestions and information will be greatly appreciated.
Has anyone run into this? What was your solution to this problem?

Hi Joe,
Moved your post to the Universe Forum.
First you are using the original release of XI R2. You need to upgrade to Service Pack 6 by:
Run License Manager first to get the keycode if you don't have it on paper somewhere.
Then download these and uninstall then run full build first:
https://smpdl.sap-ag.de/~sapidp/012002523100011802732008E/crxir2_sp4_full_build.exe
https://smpdl.sap-ag.de/~sapidp/012002523100013876392008E/crxir2win_sp5.exe
https://smpdl.sap-ag.de/~sapidp/012002523100015859952009E/crxir2win_sp6.exe
Try again
Don

Error in reading data from planning book

Hi Guys,
I am facing error in reading data from SNP planning book .
When i try to read single product data for simulation version , it gets loaded correctly.
However, when i try loading data for more than one product, then i get error "Product does not exist".
I checked all products are assigned to model-version.
I tried running consistency check as well and after it finished got message as "All inconsistencies can not be corrected".
Please let me know if any one had faced this error.
Thanks.

Hi,
Consistency check should solve the problem in this case. Try running it specifically on the version you are using. It should work.
Regards,
Guru Charan.

Invalid Data Status while loading data in planning book

Hi,
Recently i got the error message "Invalid Data Status - Error reading data - planning book cannot be processed further ". I was able to resolve that issue by running program /SAPAPO/TS_LCM_CONS_CHECK with options Repair and check Livecache anchor. Now Here is my question, i want to know why does the livecache anchor error occurred. What steps can i take in future to avoid this error?
Regards
Kartik

Kartik,
I couldn't say. In all the years I have been using SCM, I have never been able to prevent all such errors from occurring, I have only been able to solve certain problems only under certain specific instances. Usually, the 'solvable; problems I have seen are a result of poorly written enhancments or custom programs.
One might speculate that the reason SAP provides these repair programs (yes, there are MANY inconsistency-repair type programs) because they believe that such errors are inevitable.
Maybe you would be better served by just running such programs periocically in batch, as recommended by SAP.
http://service.sap.com/~sapidb/011000358700000955412003E
Best Regards,
DB49

Can you change street date for a book in review?

Is it possible to change the street date of your book if the book hasn't been approved yet?
Our original release date for the book has long come and gone. We went by Apple's stated up to 10 days thing, and it's now over 30. It would be great to adjust the street date so we could at least take preorders. Is this possible?

Same...there is only one
Page 42 in the iTP Guide https://itunesconnect.apple.com/docs/UsingiTunesProducerPaidBooks.pdf
...covers the topic, but not when the dates are borked.
You may want to contact Apple about this one...

Need to change forecast data thru planning book + doubt while creating POS

Similar Messages

Maybe you are looking for