Need to change no: of entries in WTH tax tab in fv60 while parking
how can we change the no of entries in withholding tax tab in fv60 when we do the parking of a non PO invoive?
Hi All,
I got rid of this problem. I am using CRM 5.0 only, but that particule Value help application was in old floor plan of CRM 4.0. I identified it at last and changed it to new floor plan in Characteristics of View. Then it became normal and the result list of 20 rows is now visible.
But my question remains. How to change this default value of 20. I tried now with No. of lines SRES but no response for it.
regards,
Vijay.K
Similar Messages
-
Lower limit can only be changed during initial entry, Message no. NR651
Hi Experts,
As per the number ranges limit values defined in the system for the planned orders, there is a need to increase the number ranges.
System is not allowing us to change the limit values of the Planned orders in MD91 and showing the Message no. NR651.
We have also searched for the available threads in SCN and other sites, but didn't find the root cuase link for this error.
System message:
Lower limit can only be changed during initial entry
Message no. NR651
Diagnosis
You have tried to change the lower limit of an interval which has a non-initial number status.
System Response
The change was not executed.
Please guide us how can we increase the number ranges for planned orders.
Thanks in advance.Hi,
You can create a new number range or change in transaction OMi2 or in MD91.
Assign the 02 by clicking number range in OMi2
or in transaction OPPQ click on number range & select the 02.
Do the changes as described and analyse the results. Ensure that while testing no body is creating the planned orders.
Regards,
Narresh -
WLC: Need to change pre-shared key with a script
Hello,
I need to change pre-shared key on a Guest Wi-Fi with a script.
Does anybody has an idea how to find the right entry in the WLC 2125 MIB to change it through SNMP?
GorazdHi,
That is a textFramePreferences property
mySelection.textFramePreferences.verticalThreshold = Number (range 0- 8640)
ID Object Reference says:
"...The maximum amount of vertical space between two paragraphs. Note: Valid only when vertical justification is justified; the specified amount is applied in addition to the space before or space after values defined for the paragraph..." -
While doing change in Idoc/ abap what need to change at XI side
I have to do some change in my abap program, need to add some field over there.
Please let me what I need to change at XI side.
Here Idoc is at sender side.
I am using XSLT mapping over here.
I have one more questions, abt the concept of pipelining in XI, Do you have any one some document with example, where we can use the concept of pipelining in XI in real time problems.
ThanksHi Ram,
Please check these threads..
Problems with XI Pipeline queue setup
Pipeline entry error.
XI Pipeline Logging
XI Pipeline
/people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi
cheers,
Prashanth
P.S : Please mark helpful answers -
Quantity change in Service Entry Sheet
Dear Sappers,
My client is procuring Service for different purpose.Their requirement is they need to change the qunatity in Service Entry Sheet.But in Standrd SAP, when I'm maintaining a SES respect to PO, quantity I'm not able to change.
Is there any way to set tolerance limit in SES.When I'm maintaining SES respect to PO, and changes the quantity, system is giving error message.
Thanks & Regards
PKBDear ,
while creating Service Po in Me22N...
Go to Service Tab:
Maintain the Overfulfillment Tolerance in the grid.
also you can Check the check box of Unlimited.
Unlimited Overfulfillment
Specifies whether or not unlimited overfulfillment of requirements (overperformance of a service) is allowed at the time of service entry.
This will work
Check this out.
regards
Utsav -
Need to change a barcode: Error message appear when trying to update
Hello,
I need to change a barcode on the master data screen. When I take out the barcode and choose update I get an error message:
This entry already exists in the following tables "(AIT3) (ODBD-2035) (Message 131 - 183)
Please advise how to proceed?
Kind regards,
Ilze FourieHi,
Please refer SAP note:1844928 - This entry already exists in the following tables
AIT3
Run attached query in note, if any result, raise ticket to SAP support.
Thanks & Regards,
Nagarajan -
Removing the need to change password
This is related to [Pass language parameter to MSA;
Because we are looking to pass username and a set password with the mobileclient.exe we would like to remove the need to change password every x days
Is there a database entry that we can change or settings in MSY that will prevent it from triggering the password change?
This is MSA 5.0 SP11
Thanks
JamesHello James,
You can change the Password parameter using MSY.
1> Login to MSY -> Cross-Component Settings -> Password Paramter.
2> Select the Password Parameter "pass_exp_time" -> Parameter Value to 0.
3> Save
Hope this will resolve your query. This disable the need to change the password.
Regards,
Merul -
FM/BAPI needed to change document status
Hi,
I have a requirement wherein i need to change the document status field in table DRAW. I have document number and document type as input, based on a condition i will be changing the document status. is there any FM or BAPI available to change the document status?
Thanks in advance,
Srilakshmi.Hi Srilakshmi
The following BAPI could help you,
BAPI Name: Document.SetStatus
Document.SetStatus
Set document status
Functionality
With this method, a new status is set for the document. Optionally, with the help of the field STATUSLOG, one more entry can be made in the status log field.
Notes
The internal or the external status is specified. The internal status defines how the status on the DB is saved; the user can see the external status based on the login language on the screen.
In principle: If the internal status is specified, this has priority, otherwise, the internal status is read via the external status code.
Sample program
**define required variables
DATA: lf_doctype LIKE bapi_doc_draw-documenttype,
lf_docnumber LIKE bapi_doc_draw-documentnumber,
lf_docpart LIKE bapi_doc_draw-documentpart,
lf_docversion LIKE bapi_doc_draw-documentversion,
lf_statusextern LIKE bapi_doc_draw-statusextern,
lf_statusintern LIKE bapi_doc_draw-statusintern,
lf_statuslog LIKE bapi_doc_draw-statuslog.
Bapi-Return structure
DATA: ls_return LIKE bapiret2.
Assign the document data
the status should be changed by this document
lf_docnumber = 'Documentnumber'.
lf_doctype = 'DRW'.
lf_docversion = '00'.
lf_docpart = '000'.
lf_statusintern = 'AR'.
**Call BAPI
CALL FUNCTION 'BAPI_DOCUMENT_SETSTATUS'
EXPORTING: documenttype = lf_doctype
documentnumber = lf_docnumber
documentpart = lf_docpart
documentversion = lf_docversion
statusextern = lf_statusextern
statusintern = lf_statusintern
statuslog = lf_statuslog
IMPORTING: return = ls_return.
Errors occurred ??
IF ls_return-type CA 'EA'.
ROLLBACK WORK.
MESSAGE ID '26' TYPE 'I' NUMBER '000'
WITH ls_return-message.
ELSE.
COMMIT WORK.
ENDIF.
Regards
S.Sivakumar -
Hi,
I have to collect a Process chain in Tranport Request.
When am trying to collect, the object 0FISCPER is in $TMP Package. when i try to change the $TMP Package, the option to change the package is disabled. so i cant change this. i have to change this, if i need to transport my PC to production.
Kinldy any one suggest me what to do
Regards,
JackieHi Jackie,
Go to transaction SE03 and change the package for 0FISCPER using "Change Object Directory Entries".
Hope it helps.
BR
Stefan -
Price change allowed in entry sheet
The scenario - I need all PO that are created must have the indicator "Price change allowed in entry sheet" be checked when they are created by default. The settings in SPRO (Screen layout for external service management) allows that this field could be display, optional and required. But my requirement is that this field in PO must be checked and should be non editable (grey).
Also, what would be the best way to update all the POs that have already been created to have this indicator for every service items that are created.Hi,
Price change in entry sheet field is a hidden field in PO .In ML81 screen layout if this field is made as display than nobody will be able to change the price in entry sheet .Hence it is better to use this field as display in ML81 screen layout .
Dhruba -
Changing the 'Organize Entries' iview
Hello all,
I've received a request to make two changes to the 'Organize Entries' option of the Portal Favorites iview. They want me to remove the 'Details' option from each of the links shown in 'Organize Entries'. They also want me to make it so that you cannot click on the link and browse to where the link points while in the 'Organize Entries' iview.
I'm sure that this can be done by working with the layout set that the 'Organize Entries' iview uses. However, I can't find the 'Organize Entries' iview. If I find that, I'm sure that I can find the layout set that's being used.
Can anyone help me out here?
Thanks!
-Stephen Spalding
Web Developer
GraybarHi Stephen,
yes, it's definitely recommended not to changes the SAP standard KM configuration objects, but to create copies and use your duplicated Layout Set in a new iView.
Unfortunately I don't know which iView you mean. It could be the Link Link iView integrated in the Standard User Role -> Home (Workset) -> Company (Workset)-> News (Page). The Role can be found under Portal Content -> Portal Users -> Standard Portal Users.
But it could maybe be also another KM Navigation iView (so based on the component com.sap.km.cm.navigation) using the Layout Set <b>LinkListExplorer</b>.
You would need also to duplicate this Layout Set and make some changes, so that when clicking on "Organize Entries" your new my_LinkListMaintenance Layout Set is used. This functionality is implemented in the UI Command <b>EditLinklist</b>. You need to change the <b>Parameters</b> entry of this UI Command to "<b>rndLayoutSet=my_LinkListMaintenance</b>".
This UI Command is integrated in the Component (KM Configuration -> User Interface -> Mapping) <b>LinklistEditReference</b> you would also need to duplicate and integrate in the Collection Renderer Parameter <b>Components</b> of the LinkListExplorer Layout Set (LinkListCollectionRenderer).
I know it's kind of work to duplicated all this KM configuration objects but it's definitely worth in order to be upgrade save as you said.
Hope this helps,
Robert -
I need to CHANGE my SAML Claims Identity Provider from Siteminder to Okta
I went ahead and got specific on the title .... but, the question is a general question actually.
I currently have SAML-provider-A. I need to move my Sharepoint Claims Webapplication from SAML-A over to SAML-provider-B. I THINK that I should be able to simply remove SAML-A TIP and add SAML-B tip and as long as I retain
the same TIP-NAME - I think that my profiles shoudl not have to be migrated etc. etc.
When I DELETE the connection for UPA - and reCREATE the connection to AD via the TIP.
My fear is that there is something that will cause the UPA to duplicate the profiles. But, I dont THINK that'll happen.
Does anybody know?
if my post is helpful - please click on the green arrow. (please excuse, in advance, any perceived sarcasm/humor - as I often forget it does not translate through text) :)Hi ,
According to your description, my understanding is that you need to change your SAML Claims Identity Provider from Siteminder to Okta.
For achieving your demand, you can refer to the steps as the guide:
https://support.okta.com/entries/55886993-Microsoft-SharePoint-On-Premises-Deployment-Guide#setup
And you need to associate your existing web application with the Okta identity provider and perform IIS Reset:
http://technet.microsoft.com/en-us/library/hh305235(v=office.15).aspx#CreateWebApp
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Eric Tao
TechNet Community Support -
I need to change my websites appearance in google
My website is setup in google as to only appear when the words elegant pour are typed in, I need to change this. What I need the website to be set as is Elegant Pour Wine Aerators, not just elegant pour. I have tried the java method, changing the page name but nothing works. I have even tried the iweb seo tool but I see no change.
General SEO info...
http://www.iwebformusicians.com/Search-Engine-Optimization/SEO.html
See this page about SEO Tool and Google entries...
http://www.iwebformusicians.com/Search-Engine-Optimization/Tags.html
You also need to upload and enter a new sitemap.xml...
http://www.iwebformusicians.com/Search-Engine-Optimization/Sitemap.html
...and then be patient! -
When typing email address that I have sent emails to before what setting do I need to change so my computer will remember these email addresses, like explore does? I can't find my email settings?
This is called autocomplete. Please read the article [[Form autocomplete entries are not saved]], as it should solve the problem.
-
Trying to drag pdf files i have and combine them into one pdf file in the account i just purchased with Adobe. when i drag a pdf file over Adobe doesn't accept it. says it can not convert this type of file. but it is an Adobe file. Do I need to change it in some other form befor dragging it?
Hello djensen1x,
Could you please let me know what version of Acrobat are you using.
Also, tell me your workflow of combining those PDF files?
Please share the screenshot of the error message that you get.
Hope to get your response.
Regards,
Anubha
Maybe you are looking for
-
Is this version complies with my requirement? WinEntforSA SNGL UpgrdSAPk OLP NL Acdmc Part Number: CW2-00204
-
Help about dns error using linksys
please help me. i'm using cable modem and linksys WRT54G. if I connect my cablemodem to linksys, I cant browsing to some website (e.g www.schroders.com.hk). but if i connect cable modem directly to my laptop, I can browse that website. please help me
-
Is this speaker compatible with iPod Touch 4th gen?
Hi, As above, is the Sony ICF-C7iP compatible with the 4th Gen iPod touch? Have had a quick look through and can't see this already mentioned, apologies if already posted.
-
Two table sources - inner and outer join
Hi All - thanks for your help in advance! I have factA inner joined to dimA on pkA. However, I also want the ability to see all of dimA even if there's no fact associated. I've aliased dimA to dimB. So, factA is inner joined to dimA (on pkA) and fact
-
Hi all, could you kndly give inputs,If one doesnt have access to spro,how can one view corresponding tables in se16(data browser). No Worries Karthik