View tables in se16
Hi all,
could you kndly give inputs,If one doesnt have access to spro,how can one view corresponding tables in se16(data browser).
No Worries
Karthik
Bingo Aditya!well,i was trying to fnd out SAP DB table which contains the node structure of IMG.Well it looks like im ter but no there yet:)..... tnodeimg in se16 and the tables has fields treeid,brotherid..parentid..etc.i tried entring tcode spro in all the fields and find out which one is executable but no luck!in which field should i enter the tcode spro ? and i chose img in node_type,is that correct?kndly point me in the right direction.and tried to run performance analysis(ST05),should only sql trace be selected or rest of them aswell(enqueue trace,rfc tarce,buffer trace)..trace function-display trace must be executed ,isnt it??
I'm sure this shd test ur patience,kndly bear wth me.appreciate all ur time mate.
i will be extremely delighted if i fnd the solution .
siki and praveen,tnx for trying to help me mates.
Aditya,i googled to find out use st05 and and found this
"goto st05 ---> select the trace mode ---> trace on for user ---> give the
t-code (u want to trace), user (from which user)
and if u like u can fill other fields also -
> trace on for user . Now
execute ur transaction & once ur over goto st05 ---> trace off
---> list trace (this will show u all). hope it helps u"
i navigated to st05 and selected sql trace as trace mode and actiavted trace ,gave the tcode (SPRO) and pressed enter and it popped up a screen with parameter name and profile values(showd me rstr buffer size,max files ,file name,max files) is that supposed to show me that?i continued and turned of trace and clicked display trace ..hpe i'm in the right direction.
i also went to st01 to rectify the eror system was throwing "error while reading trace file") and did see the trace list..
kndly me provide me detail steps to display structure :SAP ref IMG
No Worries
Karthik
Edited by: SAPenjoy:) on Apr 13, 2009 8:05 AM
Similar Messages
-
Business user needs to view tables with out SE16 access
Hi ,
There is a requirement where business user ( Data team) need to view some master and transactional data tables in production . But , as per our process , end users will not be given SE16 access .
Is there any solution where we can allow the end user to view tables with out SE16 access ?
Thanks in advance .
Thanks .
Dharma.Hi,
Using Function Module C160_TRANSACTION_CALL you can call any tcode which dont have access..
Create a report and call function module and pass se16 to parameter .
CALL FUNCTION 'C160_TRANSACTION_CALL' "
EXPORTING
i_tcode = 'SE16' " sy-tcode
EXCEPTIONS
ILLEGAL_INPUT = 1 "
INTERNAL_ERROR = 2 "
. " C160_TRANSACTION_CALL
now create a tcode for this report as ZSE16.,
hope this helps u.,
You can also create Data browser ( SE16 ) in report and display as ALV., using Field Symbols and RTTS.
Thanks & Regards,
Kiran -
I need view table KNA1 from tx se16.
I view table SPFLI from tx se16,
In the tx se11 write DD0* and view all tables, but I believe that the name of the
table is KNA_BF; where is KNA1?
The message error is: the table KNA_BF is not active in the dictionary.
The message error is: the table KNA1 is not active in the dictionary.
Thank you.Thank you very much.
I checked in SE11and the table name KNA1 no exist neither in DD02L.
Then, this tables no exist in the SAP NetWeaver ABAP/JAVA Trial Version and the MiniSAP (free), only contain some table.
I read that with tx SPRO can see the contains of my version.
How did I do it?
what does that Trial Version contain?
This tables only in the NO Trial Version?(NO FREE) :
BKPF, KNA1, KNB1, BKPF, BSEG, TCURS, BSID, T001, SSCRFIELDS, z001t, z001, USR02, TRDIR, ADIRACCESS, TCURC, TCURD, TCURF, TCURM, TCURR, TCURS, TCURT, TCURV, TCURW, TCURX,ZI001, ZI001T, ZI011, INDX, LFA1, LFB1, LFBK, BNKA, TOLE, TABNA, INFO, YUINFO, TRDIR, TSL1T, TSL1D, TSL2D, TSL2T, TOBJT, USR12, LFA1, BGR00, BKN00, BKNA1, BKNB1, ZPAIS, T005, Z0022.?
Please, excuse me, I don´t understand.
Thanks.
stid. -
How to view Table names?
Dear gurus....
can u tell me how to view or whats the Tcode to view table names like for PO its CEKKO
and for PR its CEBAN and RFQ,Service etc??
ThanksHi there,
To search on a field from table it's coming help -F1 then technical details -F9
If you double click on the field table-field you are directy to the view
If u know table i would rather use SE16 or SE16N depending on r release.
CEKKO is indeed a structure. EKKO is the table.
enjoy! -
View/table V_T682 can only be displayed and maintained with restrictions
Hi friends,
When I want to displaying for V_T682 table from SM30 tr.code , it gives me about error " View/table V_T682 can only be displayed and maintained with restrictions". I think ,this table's maintenance status is marked as display/maintenance allowed with restrictions on SE11. So, how I can display the this table from sm30 tr.code.(Note: I have only displaying authorization)Hi Lakshmipathi
I already knowing to execute the tables from se16 tr.code, My aim is to displaying the customizing view.(Note: I have no authorization for SM34 tr.code.)
Edited by: kaiz34 on Sep 20, 2010 4:51 PM
Edited by: kaiz34 on Sep 20, 2010 4:52 PM -
Restrict specific tables from SE16/SE11
Dear Experts,
We have a requirement of lock from view of some specific tables in SE16/SE11. Please provide the solution.
Regards
ShishirCreate a new authorization group from SE54.
Go to SE54, then select Authorization group and click create / change.
Here create a new authorization object by clicking the new entries.
Then note the authorization group and assign the authorization group to table.
Go to SE11, enter the table name, click display. Then select Utilities - Assign Authorization Group.
Then click edit and enter the authorization group (which is created earlier)
Then in PFCG, for authorization object S_TABU_DIS enter the authorization group.
Now check the tables in SE16. -
Creating a Maintenance View Table on SE11
Hi, Experts. I want to create a Maintenance View Table on SE11 (View option on SE11 and then selecting Maintenance view from the View Type List). Is there anyone who have a document that will be able to help me create this table or pointers that will help me.
Thanks for your help.
Regardshi,
steps are
Goto SE 11.
Choose the radio button of Views, give the view name and create.
Enter the short description and table names for which u want to create view.
Select the 2nd table-name field and click on relationship button.
Then goto view fields tab.
Select the table name and the fields u want to display.
Save and activate.
please see this
steps to create a view -
How can I hide a field a table from SE16
Hi all,
I have an urgent requirement, can anyone help me? How can I hide or mask any field of a table from SE16. Also how can I restrict the user not to put a restriction on a particular field of a table so that this field should not be accessed for SQVI/SQ01.
Awaiting for reply.
Useful answers will be rewarded immediately with full points.
Tnx.You could hide the column, by using the standard functinoality of the ALV output, you would need to hide the column, and save a default layout. This way the next time you come into this display, the column will not be there.
Regards,
Rich Heilman -
I am beginner in MVC and I would like to create a view which populates two (or more) joined tables in a single view table as described below.
I have two tables:
1 - Bloggers: - bloggerID (int);
- bloggerName (string)
2 - Blogs: - blogID (int);
bloggerID (int);
- blogTitle (string);
- blogImage (string)
A blogger can have one or more blogs while one blog must be related to only one blogger.
I would like to have a view table on my webpage as the following:
Blogger Name
Blog Title
Blog Image
Noris Gang
Virus
virus.jpg
Noris Gang
Desktops
desktop.jpg
Gauthier
Books
books.png
John Leon
NNNMHJhjdhj
Nmbj.jpg
I'm using MVC 4 (or at least 3).
Thanks for your help.Hello,
From your description, it is not very clear that what you mean about the View, if it means the View concept in database as SQL Server, your required view should be as below:
Create view
as
Select Bloggers.bloggerName, Bloggers.blogTitle, Bloggers.blogImage
From Bloggers join Blogs on Bloggers.bloggerID = Blogs. bloggerID
If it means the UI view in MVC concept, I suggest you could ask it on the MVC forum:
http://forums.asp.net/1146.aspx
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Issues in exporting data from SAP tables in SE16 to excel
1.How can I save an sap table (displayed through SE16) in ECC6 into a pivot table in excel. [ I have seen this option in R/3 4.7, but do not see it in ECC.]
2.How can I copy all the rows of a 3000 row SAP table in SE16 and paste the values into excel. I need to do this in one shot and not page by page.
3.What option do I need to select inorder to preserve the formating of the values while saving as a local file in a spreadsheet format. All the values with leading zeros,like company codes gets saved with only their numeric portion when I save a SAP table as a local file. for eg company code 0001 gets saved in excel as just 1,company code 0056 gets saved as 56 etc. How do I prevent this? What option do I need to set in SAP in order for the values to be downloaded as is, without any truncation of leading zeros.1. I don't know. How about creating a pivot after exporting data
2. System->List->Save->local file->clipboard
Then paste whole lot in Excel
3. This is a problem with Excel, not SAP. SAP exports with leading zeroes.
You could export as flat file & import into Excel into a spreadsheet with an appropriate numbering format. -
How to edit data from a "View Table"?
I am importing data from a "table view" where in sql it joins several tables into one view. When I passed it in using the template it doesnt have the "Edit command column" like other direct link tables. Is there anyway I could make a view table editable? Can I manually try to do it or I have to edit the individual ables? thanks
oh sorry about that.The "template" I mean in HTMLDB when I start building a new application I used "Based on existing tables" method and with single tables it generates everything fine with search fields and edit column to the left. I have a table view that combines about 4 tables together and I used the same template (Based on existing tables) and it has the search and create but it doesnt have the "edit" column on the left. Is there a way I can edit the view table's information so that the other tables that the view combines will be updated/edited?
The reason is that lets say I dont know this person's ID number but I know his name. I search for his name on table A and it returns some general data including his ID number. Instead of going to another Table B with the person's ID number and edit that table I really want to see the information just from one search (Table A)- if a global search can be implemented that would be great too. Thanks Sergio. -
Error in creating Transport Request for a view table
Hello all,
I have an ECC IDES 6.0 system named EC1 and another one which is ECC EhP4 IDES named EA1 which I have just installed.
One of my requesters has a view table named ZVAITM_TBLE in EC1 and she wants it to be transported to EA1.
So I created a workbench transport in SE10 and included the following:
PgmID = R3TR
Obj = VDAT
Object name = ZVAITM_TBLE
But when I press enter, I encountered the following error:
No object definition exists for Customizing object ZVAITM_TBLE
Message no. TK427
Diagnosis
The Customizing object R3TR VDAT ZVAITM_TBLE is not defined in the tables of the Change and Transport System.
This means that you cannot use the Transport Organizer to edit it.
System Response
The function terminates.
Procedure
First check whether the name of the object is correct. Then you (or the system administrator) should check the object definition, to ensure that the object was created correctly (transaction SOBJ).
If the object does not exist, then create it or delete it from the request/task.
I am new to transports so I have no idea how to proceed.
Please advise.
Thanks a lot!
Cha ChaHello Cha,
Kindly open this custom table using SM30 and try creating a transport request from there.
Regards
Vivek -
Unable to view table list in sql developer
I am able to connect to the database through sql developer but unable to view tables list.
Select query is displaying the contents though.
Any Help ???Using SQL Developer, I log in using the owner user id and password. I can see all but one of my materialized views. It was definitely created by the user id I'm logged in as. A query of user_objects in sql+ shows all MVs, including the one that's missing in SQL Developer. If I log in using the same credentials in TOAD, the MV is displayed in the current schema, as I'd expect. The super weird thing is that if I use the previous version of SQL Developer, I see that MV! Any thoughts?
Edited by: [email protected] on Feb 25, 2009 9:19 AM -
Using View Tables in SQ01 and SQ02, getting 'Not Authorized to Read Table'
We are trying to use a SAP Standard View Table (CAUFV) in an SQ01 and SQ02 transaction. Even though there is no Authorization Group assigned to the View we still get "You have no authorization to read table caufv' when running the linked transaction. We tried assigning the CA and KA authorization groups to the role and got the same results. (The tables used to create the View are AFKO and AUKF and thier Authorization groups are CA and KA.) We tried other views and received the same results. Does anyone have any experience with this?
Hello Chuck,
There are 2 ways to restrict this
1: The user should be a part of at least one user group to run the corresponding ABAP query. This automatically restricts the access of the user to specific functional areas, and thus the corresponding underlying logical databases.
2: The authorization object S_QUERY should be used to give proper authorizations to the user for a query. This authorization object has a field named ACTVT, which can take values 02 for Change, 23 for Maintain and 67 for Translate.
This value determines whether the user can create and modify the query. The possible authorizations in the object are as follows:
S_QUERY_ALL Change, maintain and translate query
S_QUERY_UPD Change and Translate -
Create View table with multiple table
I want to create View table with relation with multiple tables.
for ex
table 1
mrnno
mrnqty
table 2
mrnno
issqty
table 3
mrnno
retqty
want to create view table where i can see the sum (mrnqty), sum(issqty),sum(retqty) group by mrnno
sandyHi
CREATE OR REPLACE FORCE VIEW my_view AS
WITH t1 AS
(SELECT mrnno,
SUM(mrnqty) sum1
FROM table_1
GROUP BY mrnno),
t2 AS
(SELECT mrnno,
SUM(issqty) sum2
FROM table_2
GROUP BY mrnno),
t3AS
(SELECT mrnno,
SUM(retqty) sum3
FROM table_3
GROUP BY mrnno)
SELECT mrnno,
sum1,
sum2,
sum3
FROM t1,t2,t3
WHERE t1.mrnno = t2.mrnno
AND t1.mrnno = t3.mrnnoCheers
Ben
http://www.munkyben.wordpress.com
Don't forget to mark replies helpful or correct ;)
Maybe you are looking for
-
How do I remove an incorrect apple ID from an iPad and replace it with the correct one?
How can I remove an incorrect Apple ID from my ipad and replace it with the correct one?
-
Can any one help me get rid of a deleted app 4oD that still appears in the Settings list. I deleted it from the home screen and Spotlight search confirms it has gone. It is causing problems because I get notified of updates and I cannot get rid of th
-
Receiving error message when trying to install Toshiba Power Saver
Recently toshiba power saver stopped working - I removed it and redownloaded it from this website, now whenever I try to run the install i get a "unable to machine id" message and the install stops. First time posting here so If i'm on the wrong foru
-
Blank, non-loading emails in Snow Leopard Mail
Hi, I'm really confused. I am upgrading to a new computer, an iMac i5, and just transferred my main IMAP-based mail account. Some messages - it seems to be messages with attachments only - are displaying blank. They load up fine on my backup machine
-
Faxing a Crystal Report that has been exported to a PDF
Hi. I am having a problem trying to fax a Crystal Report that has been exported to a PDF. I am using Windows XP Pro SP3, VB.Net 2008 and the Crystal Reports that came with it. The report exports to a PDF with no problem. Generally, I can fax a docum