Need to create public IP for cluster headnode.
Hi There,
I am trying to create a public IP for the headnode in the HDInsight cluster. I have tried a similar approach as followed for creating public IP for
Virtual Machines as in following link:
http://www.jonprocter.com/assign-a-public-ip-pip-to-an-azure-virtual-machine-vm
I am able to get the virtual network under “Linked Resources” in Dashboard tab in for the created cluster.
But, I am not able to create Public IP address for the cluster’s headnode. Please suggest me a way to create public IP for the HDinsight cluster’s
headnode.
Regards,
Athiram S
Hi Arvind,
Thanks for your reply.
Actually, I am looking for creating public IP for my vm that is created while creating my HDinsight cluster. I dont get the cluster's namenode VM listed in the above location. I have it under the HDInsight section and I don't get any idea as how to create
a Public IP address for the cluster's namenode VM.
Please help me on this.
Regards,
Athiram
Similar Messages
-
Do I need to create a view for this?
Hi Ihave got 2 tables emp and project
In emp tabe:
emp_no
family name
given name
In porgect table:
emp_no
status(assigned,unassigned)
start_date
end_date
emp_no Family_name given_name
1 Smith John
In project table same employee can have many assigement eg
emp_no status start_date end_date
1 assigned 01-may-08 01-july-08
1 assigned 01-sep-08 01-july-09
1 unassigned 01-july-09 01-oct-09
In the form:
there are 2 querable fields "project ends between field1(date) and field2(date)" which is used to
retrive records which have end date between field1 and field2.
The following fields are needed to get from database:
emp.family_name emp.given_name project.start_date project.end_date No.of time assigned
Requirements:
1. project.start_date and project.end_date must be the latest project_end_date for the same emp
so in the above sample date
2. No. of time assigned is a count of total of number records which have status='assign'
So for the given sample data the record expected after query would be(field1=01-jun-08 field2=02-july-09)
emp.family_name emp.given_name project.start_date project.end_date No.of time assigned
Smith John 01-sep-08 01-july-09 2
What is the best approach to get:
1 The lastest project(latest end_date) for the emp
2. get No.of time assigned.
Do I need to create a view for this? If yes, any sample sql code this this?
Thanks for your helpHi W1zard,
Thanks for your reply. Could you clarify the following points for me:
1.) you could create a master block basing on your emp table and a detail block basing on your project table with the relation over emp_no. set the default_where clause of your detail block programmatically using
set_block_property('project', default_where, 'status = ''assigned'' and <your_date_criteria>');
Q1: where I pit this code? in pre-query trigger in detail block?
2.) Of course you could create a view to join both of your tables if you don't want to use master detail blocks; Also do the join over emp_no
create or replace force view v_emp as
select emp.family_name, emp.given_name, project.start_date, project.end_date
from emp, project
where emp.emp_no = project.emp_no
Q2 As I mentioned before, there are multipal entries for the same emp in project table and we only need the maching record from project table which has latest end_date. So I think I need something like
max(project.end_date) somewhere in create view to make sure only one record for one employee.
Also is there possible to include the no. of assigned field(select count(*) from project where status='assigned' and emp=emp_no) into the view as well?
Q3 All the fields mentioned above are diaplay-only. So Can I create a control block which has all the fields from emp and project. Then populate them with my sql. The question is
where I put this customerised sql so when user click excute query. My sql will run and display one the form?
REally appreciated your help!
Michael -
We are a family of 4, each with their own apple device. Is it best for us to set up individual apple ID's for things like ITunes? If we do can the same e-mail address be used for all of them or do we need to create e-mails for the kids?
Thank-you1. Yes, it is.
2. You may be able to use the same address by adding a plussed suffix to it, such as [email protected] If that doesn't work, create separate emails.
(103279) -
What is the need of creating partner functions for sales document type.
Hi SAP (SD-GURUS),
Actually we create partner functions before creating customer ex: sold to party, ship to party, bill to party, and payer.
These partner functions are going to be copied into sales order while processing sales order.
Again what is the need of creating partner functions for sales document type.
Thanks&Regards
sreenivas peruruThere are some Partners you could enter at Sales ORder Level. E.g. Sales Person, Employee Responsible, Forwarding Agent, Broker, etc.
Thus these partner Determination need to be carried out at Sales Order Level & not at Customer Master level.
So we have to configure partner Determination for various levels e.g. Customer Master, Sales Order, Delivery level etc...
Hope this helps...
THanks,
Jignesh Mehta -
Need to Create a Check for Plant in WBS & Plant in Network
Dear Guru's,
While creating Project (CJ01) my users are creating in a Plant, and while creating network for the same project/WBS, they are using different Plant Code.
Since my Profit center is related to the plant in CJ01,
and because of wrong Plant in network, all my PR/ PO is going in a different Profit center, which is creating a huge problem while auditing.
I need to Create a Check for Plant in WBS & Plant in Network...!!
Kindly suggest me the ways to do it and how to do it...Hi Deepa,
The Check you are trying to create between Plant defined at Project def and network level that should be same can be achieved through validation at the network level by using a user exit at network level.
While creating the network you can change the plant value not equal to the value at proj def/network profile may be one of the reason is since the network type is defined for more than one plant (OPUV).
While creating validations at network level we do not have the option of setting the prerequisite/check using WBS or Proj def fields (i.e. PROJ-, PRPS- fields) so we need to create a user exit at the network level.
I am not sure but logically u can have a user exit for both prerequisite and check steps of the validation.
You need to create the user exit in program ZGGBR000.
Please take help from your Abaper for the same.
OPSI-Network header-Validation- Step - Prerequisite u2013 Check u2013 Message.
Prerequisite
If Proj Profile = u2018XXXu2019 and Network Profile = u2018XXu2019 (or as per your logic if need be use a exit)
CHECK.
PROJ-WERKS = CAUFVD-WERKS (This logic needs to be defined in user exit and set the same user exit at the check.)
Once you define the user exit in ZGGBR000, it will be available in the tab u2018exitsu2019 at the Prerequisite and Check levels.
The name of the form pool (e.g., ZGGBR000) that contains your user exit must be stored in table T80D.
It is important that you make declare the code generation program for your user exit; how many and what type of parameters you are using for the user exit. You do this by entering your newly defined user exits in the form routine GET_EXIT_TITLES. Found in program ZGGBR000.
Check with your Abaper to check on all the aboveu2026
Message:
Plant at Network level should be same as at Project def level.
Hope it helps you,All the best..
Regards
Vinayak. -
Do we need to create two zones for Two HBA for a host connected with SAN ?
Hi,While creating Zone , Do we need to create two zones for Two HBA for a host connected with SAN ? Or a zone is enough for
a host which having Two HBAs...We have two 9124s for our SAN fabric...
As I found like one zone below, I little bit confused that , if a host having two HBA connected with SAN, should I expect two zones for every Host?
from the zone set, I gave the command show zoneset
zone name SQLSVR-X-NNN_CX4 vsan 1
pwwn 50:06:NN:NN:NN:NN:NN:NN
pwwn 50:06:NN:NN:NN:NN:NN:NN
pwwn 10:00:NN:NN:NN:NN:NN:NN
But I found only one zone for the server's HBA2:by the same time in the fabric I found switches A & B showing the WWNs of those HBAs on its
connected N port...Its not only for this server alone, but for all hosts..Can you help me to clarify on this please..that should we need to create one zone for
one HBA?if u have two independent fabrics between hosts and storage, i think the below confs are recommended.
Scenario 1: 2 HBAs single port each ( redundancy across HBA / Storage port )
HBA1 - port 0 ---------> Fabric A ----------> Storage port ( FAx/CLx )
HBA2 - port 0 ---------> Fabirc B ----------> Storage port ( FAy/CLy )
Scenario 2: 2 HBAs of dual port each
HBA1 - port 0 -------> Fabric A ---------> Storage port ( FAx/CLx )
HBA2 - port0 ---------> Fabric A ---------> Storage port ( FAs/CLs )
HBA1 - port 1 --------> Fabric A --------> Storage port ( FAy/CLy )
HBA2 - port 1 ---------> Fabric B --------> Storage port ( FAt/CLt )
the zone which is in your output is VSAN 1. if its a production VSAN, Cisco doesn't recomends to use VSAN 1 ( default vsan ) for production. -
Do we need to create message interfaces for idocs and rfcs thatare imported
do we need to create message interfaces for idocs and rfcs thatare imported
from sap server
in scenarios from sap system to file or vice versa
i knew that we need not create message types
do we also skip creating message interfaceshi,
you create an abstract message interface for IDOC only if you want to use
them in a BPM (integration process)
for more about IDOCs have a look at my book:
<a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi"><b>Mastering IDoc Business Scenarios with SAP XI</b></a>
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a> -
Do I need to create new group for standby redo log files?
I have 10 group of redo log files with 2 members for each group for my primary database , Do I need to create new group for standby redo log files for the standby database
Group# Members
==============
1 2
2 2
3 2
4 2
5 2
6 2
7 2
8 2
9 2
10 2
If So, The following statment is correct? or nto
ALTER DATABASE ADD STANDBY LOGFILE GROUP 1 ('D:\Databases\epprod\StandbyRedoLog\REDO01.LOG',D:\Databases\epprod\StandbyRedoLog\REDO01_1.LOG');
please correct me if am doin mistake
becuase when I issue the statment I getting error message sayin the group is already created.Thanks John
I just find the answer
Yes, it's recomeded to add new group , for instnace If I have 10 group from 1 to 10 then the standby shoudl be from 11 to 20
Thanks I found the answer. -
Help! Help!~I need to create a room for a Robot to move in!!
I need to create a room for a robot to move around in. How do I go about doing this?
Im not sure where to start.
ThanxsCould you define a shape and just have the robot check its proximity to the wall?
I did something similar a couple of years ago where my hunter bots had to chase the rabbit bots and the rabbit bots ate the grass... you get the picture
The hunters were able to see the rabbits and they were attracted to the area with most of them. The rabbits were able to see the grass and the hunters and were attracted to grass but if a hunter was in sight, that was overridden and they moved away from the hunters.
The controllers were simple neural nets which were set up through GAs.
How will your robot detect the walls? I mean, will it be able to pinpoint its position in the room or will it only have visual info (it will "see" the wall to its right etc)?
If the first, I would be inclined to use some shape and just check for the position of the robot compared to the boundaries.
If the second, I would make the shape out of a whole load of Point objects and arrange them in the shape of the room. The benefit is that you will be able to specify some vision function based on how many Points are within his field of vision, and then get the net to learn that the optimum value is x... or something like that. It has been a few years since I did that stuff. -
i need to create an ID for each of my daughters it says DO NOT MEET MINIMUM AGE REQUIREMENT very frustrated
If u haven't resolved this issue yet, I just did.
What I did:
1. Toggle the hold switch (turn it on and off)
2. Reset to 'Disk Mode'
by pressing the 'Play' and center buttons
simultaneously
(it may take a couple of trials to get it right)
3. Update iPod with latest iTunes in Disk mode.
4. Incase the 'Can't find firmware' error msg is displayed,
follow the instructions in the link given below:
http://docs.info.apple.com/article.html?artnum=304309
Toshiba SatelliteA30-203, Compaq Presario 3000 Windows XP Pro -
Pointers needed to create a JSP for week/hour calendar type component
Hi,
I am looking to get some pointers on how to create week/hour calendar type component in JSP.
My application is JSP/struts2 based web application. I need to create a web page where users will see a week hour calendar and for any time slot will enter some information. Each time slot can have different information. For example: Sunday 9:30am to 10:00am - Click on this cell and pop up a dialog for info and save it without refreshing the page. At the end combine all this info for each slot and submit to the server.
If there is already a component like this is available to use, please point me to that.
Any ideas are welcome.
Thanks,
Developer in need.I dont know of an already existing application that can do this. However, here are some ideas on creating your own:
Create an html table in JSP who's number of rows and columns match what you would find in an ordinary wall calendar for the given month and year. Use the Calander.java class to obtain the number of days in the current month and build the JSP page accordingly (Calendar.java should automatically take care of leap year). You will probably need to add 'next' and 'previous' buttons to the form to retrieve the previous and next month(s) in case the user wants to access previous or future months. Each cell in the table displays that day (example ' 28 '). Notice my convention the first column is usually 'Sunday'.
Next, determine what to put in each cell. One suggestion is to embed a table in each cell with 48 rows (24 hours in a day, 1/2 hour resolution= =48), and two columns (first column is for time: example: "10:30am to 11:00am", the second column is for the user's appointment message).
Above that embedded table is the day (example: '28'). If a user has no information in the embedded table, the outer cell will appear to have nothing but the '28' in it.
Next, how to populate the cell. When the user clicks on the cell, have an onclick event call a javascript function. The function will pop up a new window (a child window) by calling 'window.open( )' (google 'window.open'). In the pop up, show a table with 48 rows, 2 columns that the user can type in a message within column 2. When the user clicks 'submit' button on the pop up, call a javascript onclick function that reads all the message cells. Any cell not empty will populate the corresponding cell (day, rowID, columnID) back on the parent window by calling something like this: window.opener.document.myFormName.myTextField.value = someValue
(google 'window.opener'). Once this is done, close the child window from that javascript function. By calling 'window.opener', you dont have to refresh the parent window.
Next, if the user clicks on the parent window cell that is already populated, you will have to pass all theexisting information for that day through the window.open( ) to the child window so the pop up child window will show that preexisting information (that way he can add to the cell or alter it as he pleases).
Next, after he alters many days on the calender, you have to provide an 'update' button on the parent form so the user saves his changes (write the data to a database record, with his name attached to that record). Note: if he clicks the previous/next button, he will lose any changes unless you also save the information before going to the previous/next page.
Next, you might want to provide a vertical scroll bar on the table cell if
the end user has many messages that cant be viewed in the parent cell all at once. Note each cell should be a fixed number of pixels width/height so it shows correctly. Have Fun! -
Need to create search help for parameter 2 based on values in parameter1
hi Specialists,
I need to create a search help for parameters field 2 ( Country ) based on the values the user inputs in parameters field 1 ( Currency ). The values of field Currency & Country will come from T001 table.
The logic is : Based on a unique currency value ( fetched from T001 table ) user needs to get/see all Countries on his selection -screen.
Can you guys let me know which FM can I use for above & how to pass various values i.e. parameters into that FM. EXplanation with an example/code is highly appreciable.
Thanks
Abhinav.Hi Abhinav,
Use this demo code, its working:-
This code selects sale document item based on the user entry for sales document on the screen field.
REPORT ztg_f1f4.
CALL SCREEN 1010.
*& Module GET_F4_HELP INPUT
* text
MODULE get_f4_help INPUT.
TYPES : BEGIN OF it,
posnr TYPE zvbap-posnr,
END OF it.
DATA : itab TYPE STANDARD TABLE OF it WITH HEADER LINE,
tb_dynpfields LIKE dynpread OCCURS 0 WITH HEADER LINE,
vbeln TYPE zvbap-vbeln.
CLEAR: tb_dynpfields.
REFRESH: tb_dynpfields.
MOVE 'ZVBAP-VBELN' TO tb_dynpfields-fieldname. "screen field name
APPEND tb_dynpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = 'ZTG_F1F4'
dynumb = '1010'
* TRANSLATE_TO_UPPER = ' '
* REQUEST = ' '
* PERFORM_CONVERSION_EXITS = ' '
* PERFORM_INPUT_CONVERSION = ' '
* DETERMINE_LOOP_INDEX = ' '
* START_SEARCH_IN_CURRENT_SCREEN = ' '
* START_SEARCH_IN_MAIN_SCREEN = ' '
* START_SEARCH_IN_STACKED_SCREEN = ' '
* START_SEARCH_ON_SCR_STACKPOS = ' '
* SEARCH_OWN_SUBSCREENS_FIRST = ' '
* SEARCHPATH_OF_SUBSCREEN_AREAS = ' '
TABLES
dynpfields = tb_dynpfields
* EXCEPTIONS
* INVALID_ABAPWORKAREA = 1
* INVALID_DYNPROFIELD = 2
* INVALID_DYNPRONAME = 3
* INVALID_DYNPRONUMMER = 4
* INVALID_REQUEST = 5
* NO_FIELDDESCRIPTION = 6
* INVALID_PARAMETER = 7
* UNDEFIND_ERROR = 8
* DOUBLE_CONVERSION = 9
* STEPL_NOT_FOUND = 10
* OTHERS = 11
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE tb_dynpfields INDEX 1.
IF sy-subrc EQ 0.
vbeln = tb_dynpfields-fieldvalue.
ENDIF.
SELECT posnr FROM zvbap
INTO TABLE itab
WHERE
vbeln = vbeln.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
* DDIC_STRUCTURE = ' '
retfield = 'POSNR'
* PVALKEY = ' '
dynpprog = 'ZTG_F1F4'
dynpnr = '1010'
dynprofield = 'POSNR'
* STEPL = 0
* WINDOW_TITLE =
* VALUE = ' '
value_org = 'S'
* MULTIPLE_CHOICE = ' '
* DISPLAY = ' '
* CALLBACK_PROGRAM = ' '
* CALLBACK_FORM = ' '
* MARK_TAB =
* IMPORTING
* USER_RESET =
TABLES
value_tab = itab
* FIELD_TAB =
* RETURN_TAB =
* DYNPFLD_MAPPING =
* EXCEPTIONS
* PARAMETER_ERROR = 1
* NO_VALUES_FOUND = 2
* OTHERS = 3
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDMODULE. " GET_F4_HELP INPUT
Hope this solves your problem.
Thanks & Regards,
Tarun Gambhir -
Do we need to create distinct extensions for CC and CC2014
I am not using Extension Builder.
If I am creating an HTML5 extension, do I need to create two distinct .zxps and manifest files for CC and CC2014? (Presuming there will be some users who continue to use CC for whatever reason).
I guess I can specify a broad version range for the Host elements in the HostList in the manifest e.g. <Host Name="PHXS" Version="[14.0,15.9]"/>
But looking at the RequiredRuntime:Version and ExtensionManager:Version in the manifests - I'm not quite sure what they mean and whether they preclude using a single manifest for both CC and CC2014.
Thanks for any ideas.You can support CC and CC2014 but you need to develop for the earlier version e.g. CC and RequiredRuntime:Version 4.0. You are correct to extend the version range of the application to include both CC and CC2014 versions. We have many manifest examples that work for both CC and CC 2014 at: https://github.com/Adobe-CEP/Samples
-
Do we need to create Storage Bins for each Client?
Hi,
I have defined the storage bin structure etc which I could transport.
But does the creation of bins (using LS01N) need to be done separately for each client? If on the test client we dont have access to Create Bins then what is the right approach to get it done.
Thanks.Thanks. I tried using LS05.
What entries should I make?
I entered Warehouse and Storage Type
The Default Session was showing as RLLS0500 and I left it as it is.
But I am getting Error message "Check you entry for manual storage bin creation".
Any suggestions?
Thanks. -
Call transaction for pop2.need to create packing instructions for materials
while assigning packing instruction to the materials from table mara.
its unable to create a new line item in the screen. ex: only 8 records are saved
but needs to proceed for other materials increasing the line item no.
options of create new material ( ok code'=INLI', , create new entry('=INMA')
and even tried for page down option '=P++'. is not working.
Can anyone help me in creating more than 100 line items.
Thanks in Advance,
SushmaHi,
Why do you want to create the varient for this?
what is your actual requirment?
Regards,
Sachin
Maybe you are looking for
-
I just recently purchased a MacBook Pro (13 inch with Retina display), an iPad Air 2, and an iPhone 6 plus. Before these purchases, I was using a Windows 7 laptop to manage my iTunes library and iTunes purchases. I am in need of syncing my iTunes l
-
Hi All, I have triggers creating in one schema. I want to edit the triggers now and recompile them, but when I do this, it prompts to me INSUFFICIENT PRIVILEGES. I am able to edit and recompile the packages, procedures and function but not the trigge
-
I'm trying to upgrade from 10.5.8 to Snow Leopard
I'm trying to upgrade from 10.5.8 to Snow Leopard but keep getting an error message, "This update requires Mac OS X version 10.6.". Isn't Snow Leopard 10.6?....so now what?
-
Wireless Controller 4402 Crash
Hi, I will make an abbreviation report about my case. My WLC 4402 was running 4.0.217.0 version. There are 18 access point work with local. It's work fine. To a new project, we will add a access point 1522 and others 1242 to extend the range to a sma
-
i want to know do we get the tunnel update in ospf shivlu