Need to find out specs for a few CTR units placed ( orders placed on the outlet )

Hi I need a moderator or Lenovo employee to help me find the specs for some units I purchased from the outlet. There is no records of specs on the website. These are CTR ( previously Custom to Order ).

http://support.lenovo.com/en_US/product-and-parts/partsLookup.page
Use this by entering serial and machine type - it will give you full BOM of parts in your CTO computer.
T430s (i7 / HD+ / Intel 520 SSD / 16 GB Ram)
Previous: X60s, Portégé R100

Similar Messages

Re: Need to find out specs for a few CTR units placed ( orders placed on the outlet )

Well thats not the easy way to check 90 machines. Besides I'd have to look up FRU numbers , as the information is not clearly laid out.
Thats a bad advice...

http://support.lenovo.com/en_US/product-and-parts/partsLookup.page
Use this by entering serial and machine type - it will give you full BOM of parts in your CTO computer.
T430s (i7 / HD+ / Intel 520 SSD / 16 GB Ram)
Previous: X60s, Portégé R100

I need to find out HOW I can download Adobe Acrobat 10.

I have my serial number, where the product is registered to me through Adobe, but I cannot find the software.
How can I download the product now?
I need Adobe Acrobat 10
Thanks!

I think it must have originally come installed on my Dell computer. I don't remember actually seeing an install disk. But I registered it with Adobe, and they show my serial number. I was just trying to avoid having to buy the program again, because I have changed computers, and the new computer doesn't have Acrobat on it.
Thanks for all your help!
Pat Willener <[email protected]> wrote:
Pat Willener http://forums.adobe.com/people/pwillener created the discussion
"Re: I need to find out HOW I can download Adobe Acrobat 10."
To view the discussion, visit: http://forums.adobe.com/message/5472663#5472663

I purchased Adobe Creative Suite 3 Master Collection Design Across Media Upgrade for Windows at a business closing. What do I need to find out before I can use it?

I purchased Adobe Creative Suite 3 Master Collection Design Across Media Upgrade for Windows at a business closing. What do I need to find out before I can use it?

I couldn't tell you what you purchased, and it might even be difficult for an Adobe employee to do so. The business could have a few options as far as what they might have purchased.
Your best bet, considering what little you paid, will be to hand it over to someone you might sell it to and let them try it out. If it works, then it works.

TS1646 We have several apple devices in our family who use my debit card for itune charges. I need to find out which device (itune account) these charges are coming from. Can you help?

We have several apple devices in our family who use my debit card for itune charges. I need to find out which device (itune account) these charges are coming from. Can you help?

You can't tell which device a purhcase was made on, but if your family members each have their own iTunes account to which your card is linked then you can check the purchase history on each of those accounts via the Store > View Account menu option on your computer's iTunes - that should have 'purchase history' section with a 'see all' link to the right of it

I have had Adobe XI for about two years and My harddrive just crashed. My backups were part of the failure so I can't get it back. I purchased it from a third part supplier and it was a download. I need to find out how to get it restored. I can send scree

I have had Adobe XI for about two years and My harddrive just crashed. My backups were part of the failure so I can't get it back. I purchased it from a third part supplier and it was a download. I need to find out how to get it restored. I can send screen shots of all of the drive location where the drive is still good and I can see my Adobe Acrobat pro information, but the download itself is missing. NEXT STEP?

If you are talking about Reader (you did post in the Reader forum), then just download http://get.adobe.com/reader/enterprise. However Reader is free not purchasable. You can download a trial then install using your serial number, which if you didn’t register or write down somewhere you will be out of luck to track down.
Download a free trial or buy Adobe products | Adobe downloads

I need to find out what a charge was for?

I need to find out what a charge was for on my account?

Check your Purchase History
http://support.apple.com/kb/ht2727

My account has been hacked and someone has ordered stuff from your site in my name. i need to find out some more information for the police. do you have an email adres that i can send my questions to?

They have ordered for just under 100 euros!! i now need to find out more! any suggestions?!
thanks!

You can report a problem with unauthorized purchases > How to report an issue with Your iTunes Store purchase
Change your Apple ID password > Apple - Support - Apple ID

HXXCEDT0 need to find out where are inputs for the form zk- zkq-rest

Hi guys,
im trying to modify by custumer exit, the program H99CEDT0 (the one that prints the payrroll for employees)
my problem is that i need to find where some value is stored before printed in the form.
the field is zkq-rest, i find a zq and i know that is from that table that get the field that i need, i need to find a form, method or something that extract and compute data from the zq table and stored in the zkq (absences quota)
any ideas?

Hi,
where you maintain critical limit for each items?
Try with below
You can customized batch program to perform every day to check all open PO items to check GR Qty and then send e-mail reminder
Take help from your ABAPer on this
Hope this will help to you
Regards,
Sankaran

HT1338 Need to find out if I can upgrade my Mac

I need to find out if my Mac OS X 10.4 Tiger is going to be able to be upgraded so I can upgrade the latest versions of browsers. I am experiencing
problems trying to upgrade the latest versions because they are not compatible with my vintage system.. 5 years old doesn't seem vintage to me. My Mac still works great I can buy a new one.

You can update it.
Start by checking if you can run Snow Leopard:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
OS 10.6 Snow Leopard is once again available from the Apple Store:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
and in the UK:
http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
but nobody knows for how long it will be available.
To use iCloud you have to upgrade all the way to Mountain Lion:
http://support.apple.com/kb/HT4759
You can also purchase the code to use to download Lion (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
http://www.apple.com/osx/specs/
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard.

I no longer have access to system folders that allow me to remove old or incorrect PAGES templates. Need to find out how to do that. The only way I can do it now is to blank the template and replace the bad template with a blank.

I no longer have access to system folders that allow me to remove old or incorrect PAGES templates. Need to find out how to do that. The only way I can do it now is to blank the template and replace the unwanted template with a blank. It was previously possible to go to MY TEMPLATES and remove the unwanted templates. I don't if this issue is before or since installation of 10.8 (a nightmare in my case, which led to significant failure issues). And because I haven't tried to remove templates since finally managing to install 10.8 (now at 10.8.4), I don't know if this is typical of the newer OS or a problem. I've been a Mac user for more than 25 years, but I think I'm nearing the end of the road. By the way, I've never needed to do this before because the manuals always offered an answer... they don't seem to do that anymore. In any case, I don't know how this works... I'd prefer an email reply if that's possible. But that would probably be too easy, and I don't know how to get a reply.

Thanks, I appreciate the help. I think this is one of the problems Apple is creating by changing the OS so often. I had fomer colleagues at [a major aerospace contractor] who told me that so many original files were ultimately lost because of the deadly change in the "Save As" operation that they are now afraid of every OS update. Apple has badly damaged their support base with that very prominent company (they won't update now until they've fully examined and understand changes in the pre-conditioned nature of OS computer functions), and they are a whole lot less enthaled with Mac-related equipment/software. Can't blame them, I too used orginal files that way (as easy-to-use templates), and lost some important files before I realized what was happening (to late to revert). Companies should not have to retrain employees each time an OS gets an update, it's can be very expensive several different ways. They learned a painful lesson with that one. And because I'm now retired and don't use multiple devices, I need iCloud like I need a hole in the head... but I'm told there's no way to keep Apple out of my computer. Fortunately, because of major problems when initially installing Mountain Lion, one hold-over of the hardware/software damage I experienced was that iCloud can no longer access my computer even though everything else is working fine again. That was the only "good luck" I had as a result of that expensive nightmare.

I need to find out the list of outbound made it to the vendor

I need to find out if the attached list of outbound made it to the vendor.
and i have list of all IDOC numbers that i need to check. Could you please assist? how to check?
Please do needful.
Thanks in advance.
Regards,
PIneeder.

Hi,
If you want to check it in XI/PI check first:
- in the abap stack transaction:
              - sxmb_moni and filter for your sending system and idoc type
                     or
              - idx5 fill in the date when the idoc was sent and the idoc number from the sending system and through double-clicking you will get to the same message as in sxmb_moni
- in the runtime workbench (only if the communication with the partner is done via a java based adapter (all except xi,http and idoc) go to the runtime workbench and then click on message monitoring and filter for your messages. If the status there is succesfull then you can safely assume that the message was delivered to the partner. Note: it sometimes happens that a PI server also has one or more decentral adapter engines. In this case you need to check if your communication channel is deployed on any of them (you can check that in the Integration Builder) and then select the corresponding one in the Runtime workbench -> Message Monitoring -> Message from Component.
Hope this helps,
Horia

My screen on my iPhone has cracked and I need to find out how much it costs to get it fixed

My screen on my iPhone has cracked and I need to find out how much it costs to get it fixed

The cost is $149 for all the phones except the iphone 4S that one is $199. Apple does not cover any acidental damage

Need to find out how many users are using Siebel Application

Hello all,
I need to find out how many users are using Siebel Application?
Is there a way I can find out?
Thanks.
yasun

Hi,
Read the following:
http://docs.oracle.com/cd/B40099_02/books/SysDiag/SysDiagSysMonitor30.html
http://docs.oracle.com/cd/B40099_02/books/SysDiag/SysDiagSysMonitor17.html
For full information about server status and statistics red:
http://docs.oracle.com/cd/B40099_02/books/SysDiag/SysDiagSysMonitor.html
T.Abed

I need to find out how much wifi data my apps are using. I have a very limited amount of wifi data, and I am exceeding my monthly allowance. Apparently, even apps I think are not open are sending/receiving data through the wifi and using up my allowance.

I need to find out how much wifi data my apps are using. I am on a very limited amount of WiFi data each month, which I am regularly exceeding. I have been told to work out which of my apps is using the data. Also, I think I have closed an app by double clicking the home button, then swiping the app up - is this the way to close it, or will it still be sending/receiving data?

Go into your Settings : General : and turn off background refresh for your apps. In Settings : Mail turn Fetch new data to OFF and Load Remote Images to OFF. This will mean that Mail will only check for messages when you actually use it, and all your advertising junk mail won't have all the images in it.
Turn off push notifications every chance you get.
Make sure you are actually quitting apps: to quit apps press the Home button twice and you should see a bunch of smaller screen images for every open app. To quit the app swipe from the screen image (not the icon) upward off the top of the iPad. You can swipe left and right to see more open apps, but there must be no left-right movement on the screen when you swipe upward to close the app.
Turn off your internet connection when you do not need it. The easiest way to do this is to swipe up from the bottom of you screen to get the control centre, and then touch the airplane to turn on airplane mode. You can repeat this sequence to turn it back on again when you need it. Most especially turn airplane mode on whenever you are sleeping your iPad for long periods. This will save battery life too. OR actually turn your iPad off - which means holding the power key down for several seconds until the red swipe bar appears, and then swipe to turn it off. If you go this route, note that it will take longer to turn on then it takes to wake from sleep.

Need to find out specs for a few CTR units placed ( orders placed on the outlet )

Similar Messages

Maybe you are looking for