Need to make JTextArea scrollbar at top
I've created a JFrameForm using GUI netbeans 5.0
When i created a JTextArea.. then i just put a lot of words inside it, then it'll automatically created a scrollbar there.
The problem i face is when i try to execute it, the scrollbar is at the bottom. How do i make it to start at the top?
Please help.
i've asked at the specific forum, jguru.com , but no one is replying. So i hope any of you can help me about it. Its not that i purposely violate the rule of this forum. I apologize firstly.
Hi try like this,
jTextArea1.setText("sdfasdf\nasdfasdf\nasdf\nasdf\nasdf\nasdf\nasdf\nasdf\nasdf\nasdf\nasdf");
jScrollPane1.setViewportView(jTextArea1);
getContentPane().setLayout(new org.netbeans.lib.awtextra.AbsoluteLayout());
getContentPane().add(jScrollPane1, new org.netbeans.lib.awtextra.AbsoluteConstraints(80, 140, 100, 90));
pack();
jTextArea1.setCaretPosition(0);
regards
Dhinakar
Similar Messages
-
Need to make JFrame Always on top.
I have the main application window(JFrame).It in turn creates many JFrames , i want the newly created JFrames to be set as ALWAYS_ON_TOP , ie even if i click on the the main window,the new JFrames should be always on top similar to Yahoo messenger and MSN messenger.
Actually i don't want the functionality of "ALWAYS_ON_TOP" with JDialog or JInternalFrame,as both of them will ultimately have their parents as the main JFrame window.
I want this functionality with JFrames that are created from the main JFrame window.
Actually i am floating some components of my main JFrame window for which i create a new JFrame window and place that floated component.
Now this floating JFrame is independent of the main JFrame window ,but i want to set "always on top" for the floating JFrame windows similar to the Yahoo and MSN messengers.Try this code. It should be work on all windows which are inherited from java.awt.Window
* Call this from class consructor
public void initialize() {
TopThread top = new TopThread();
top.start();
* Keep JWindow on top (inner class)
class TopThread extends Thread {
public void run() {
while(true) {
toFront();
* Let 10 milliseconds for other code to execute
try {
Thread.sleep(10);
catch(Exception e) {
// Nothing to do -
I have a normal report , i need to make it into ALV,
Hi,
i have a normal report and i need to make it into ALV Report in ECC5.0version. when i making it into ALV its giving blank.
can any one help me out to make below code in to ALV report.
REPORT ZSAMPLE line-size 260
line-count 65
no standard page heading.
====================================================================
TABLES *********************************
====================================================================
tables : bseg,
bkpf,
kna1,
bsid,
bsad,
knb1.
data : begin of customer_tab occurs 0,
kunnr like kna1-kunnr,
name1 like kna1-name1,
flag(1) type c,
end of customer_tab.
data : begin of customerdoc_tab occurs 0,
kunnr like kna1-kunnr,
belnr like bkpf-belnr,
gjahr like bkpf-gjahr,
monat like bkpf-monat,
end of customerdoc_tab.
data : begin of doc_tab occurs 0,
belnr like bkpf-belnr,
gjahr like bkpf-gjahr,
monat like bkpf-monat,
end of doc_tab.
DATA: BEGIN OF BSID_TAB OCCURS 0,
BUKRS LIKE BSID-BUKRS,
PRCTR LIKE BSID-PRCTR,
KUNNR LIKE BSID-KUNNR,
FLAG(1),
UMSKZ LIKE BSID-UMSKZ,
BLART LIKE BSID-BLART,
BELNR LIKE BSID-BELNR,
BUZEI LIKE BSID-BUZEI,
NETDT LIKE BSID-ZFBDT,
ZFBDT LIKE BSID-ZFBDT,
BUDAT LIKE BSID-BUDAT,
BLDAT LIKE BSID-BLDAT,
BSCHL LIKE BSID-BSCHL,
DMBTR LIKE BSID-DMBTR,
SHKZG LIKE BSID-SHKZG,
ZBD1T LIKE BSID-ZBD1T,
ZBD2T LIKE BSID-ZBD2T,
ZBD3T LIKE BSID-ZBD3T,
REBZG LIKE BSID-REBZG,
REBZT LIKE BSID-REBZT,
KOART LIKE BSEG-KOART,
SK1DT LIKE FAEDE-SK1DT,
SK2DT LIKE FAEDE-SK2DT,
DAYSD LIKE SY-TABIX,
END OF BSID_TAB.
ranges : r_bukrs for bsid-bukrs,
r_kunnr for kna1-kunnr.
===================================================================
VARIABLES *******************************
===================================================================
data : v_belnr like bseg-belnr,
v_gjahr like bkpf-gjahr,
v_monat like bkpf-monat,
v_ttlc type p,
v_flag(1) type c,
V_COUNT1(4) TYPE N,
V_COUNT2(4) TYPE N,
V_COUNT3(4) TYPE N,
V_COUNT4(4) TYPE N,
V_COUNT5(4) TYPE N,
V_COUNT6(4) TYPE N,
V_COUNT7(4) TYPE N,
V_COUNT8(4) TYPE N,
V_COUNT9(4) TYPE N,
V_COUNT10(4) TYPE N,
V_NET1 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 1
V_NET2 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 2
V_NET3 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 3
V_NET4 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 4
V_NET5 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 5
V_NET6 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 6
V_NET7 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 7
V_NET8 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 8
V_NET9 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 9
V_NET10 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 10
V_NET11 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 11
V_NET LIKE BSID-DMBTR, "Total Balance of Customer
V_ttlNET1 LIKE BSID-DMBTR,
V_ttlNET2 LIKE BSID-DMBTR,
V_ttlNET3 LIKE BSID-DMBTR,
V_ttlNET4 LIKE BSID-DMBTR,
V_ttlNET5 LIKE BSID-DMBTR,
V_ttlNET6 LIKE BSID-DMBTR,
V_ttlNET7 LIKE BSID-DMBTR,
V_ttlNET8 LIKE BSID-DMBTR,
V_ttlNET9 LIKE BSID-DMBTR,
V_ttlNET10 LIKE BSID-DMBTR,
V_ttlNET11 LIKE BSID-DMBTR,
V_ttlNET LIKE BSID-DMBTR,
v_kunnr like bseg-kunnr,
V_BUTXT like t001-butxt.
===================================================================
SELECTION SCREEN ****************************
===================================================================
selection-screen begin of block b1 with frame title text-001.
parameters : p_bukrs like bseg-bukrs obligatory.
select-options : s_kunnr for kna1-kunnr,
s_BRSCH for kna1-BRSCH,
s_REGIO for kna1-REGIO,
s_KTOKD for kna1-KTOKD,
s_BUSAB for knb1-BUSAB.
selection-screen: end of block b1.
selection-screen begin of block b2 with frame title text-003.
PARAMETERS: DAT LIKE SY-DATUM DEFAULT SY-DATUM.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 01(30) TEXT-002.
SELECTION-SCREEN POSITION POS_LOW.
*PARAMETERS: RASTBIS1 LIKE RFPDO1-ALLGROGR DEFAULT '000'.
*PARAMETERS: RASTBIS2 LIKE RFPDO1-ALLGROGR DEFAULT '030'.
*PARAMETERS: RASTBIS3 LIKE RFPDO1-ALLGROGR DEFAULT '060'.
*PARAMETERS: RASTBIS4 LIKE RFPDO1-ALLGROGR DEFAULT '090'.
*PARAMETERS: RASTBIS5 LIKE RFPDO1-ALLGROGR DEFAULT '120'.
PARAMETERS: RASTBIS1(4) type n DEFAULT '0000'.
PARAMETERS: RASTBIS2(4) type n DEFAULT '0030'.
PARAMETERS: RASTBIS3(4) type n DEFAULT '0060'.
PARAMETERS: RASTBIS4(4) type n DEFAULT '0090'.
PARAMETERS: RASTBIS5(4) type n DEFAULT '0120'.
PARAMETERS: RASTBIS6(4) type n DEFAULT '0150'.
PARAMETERS: RASTBIS7(4) type n DEFAULT '0180'.
PARAMETERS: RASTBIS8(4) type n DEFAULT '0210'.
PARAMETERS: RASTBIS9(4) type n DEFAULT '0240'.
PARAMETERS: RASTBIS0(4) type n DEFAULT '0270'.
SELECTION-SCREEN END OF LINE.
Noted item removed as per FI instruction
PARAMETERS: P_STAND AS CHECKBOX default 'X',
P_NOTED AS CHECKBOX ,
P_SPCAL AS CHECKBOX .
selection-screen: end of block b2.
selection-screen begin of block b3 with frame.
PARAMETERS: allgline like RFPDO1-allgline .
Parameters : p_balyes type c radiobutton group grp9 default 'X',
p_balno type c radiobutton group grp9.
selection-screen: end of block b3.
Check for the Select option
AT SELECTION-SCREEN.
IF P_STAND = '' AND P_SPCAL = '' .
MESSAGE E398(00) WITH 'PLEASE CHOOSE AT LEAST ONE G/L INDICATOR!'.
ENDIF.
Check for Company code Authorization
authority-check object 'F_BKPF_BUK'
ID 'BUKRS' FIELD p_bukrs
ID 'ACTVT' FIELD '03'.
if sy-subrc ne 0.
message e398(00) with 'You are not Authorized for CC ' p_bukrs.
Endif.
===================================================================
START-OF-SELECTION ****************************
===================================================================
START-OF-SELECTION.
V_COUNT1 = RASTBIS1 + 1.
V_COUNT2 = RASTBIS2 + 1.
V_COUNT3 = RASTBIS3 + 1.
V_COUNT4 = RASTBIS4 + 1.
V_COUNT5 = RASTBIS5 + 1.
V_COUNT6 = RASTBIS6 + 1.
V_COUNT7 = RASTBIS7 + 1.
V_COUNT8 = RASTBIS8 + 1.
V_COUNT9 = RASTBIS9 + 1.
V_COUNT10 = RASTBIS0 + 1.
perform extract_data.
===================================================================
At line Selection *****************************
===================================================================
at line-selection.
if sy-lilli >= 9 .
refresh r_bukrs.
move p_bukrs to r_bukrs-low.
move 'I' to r_bukrs-sign.
move 'EQ' to r_bukrs-option.
append r_bukrs.
refresh r_kunnr.
move customer_tab-kunnr to r_kunnr-low.
move 'I' to r_kunnr-sign.
move 'EQ' to r_kunnr-option.
append r_kunnr.
submit ZFARVR0040 and return
with p_bukrs = p_bukrs
with dat = dat
with p_stand = p_stand
with p_spcal = P_SPCAL
with s_kunnr in r_kunnr.
endif.
===================================================================
Top of Page *******************************
===================================================================
TOP-OF-PAGE.
SELECT SINGLE BUTXT FROM T001 INTO V_BUTXT
WHERE BUKRS = p_BUKRS .
WRITE:/73'Customers Aging Analysis',140'PAGE NO.',
SY-PAGNO.
WRITE:/002 'COMPANY',
011 P_BUKRS,
017 V_BUTXT,
055 allgline centered,
140 'DATE :',
150 sy-datum .
write:/002 'User',
011 sy-UNAME,
140 'Time :',
150 sy-UZEIT.
SKIP.
format color col_heading intensified off.
WRITE:/ SY-ULINE,
SY-VLINE,002 'Customer',
012 SY-VLINE,013 'Name',
043 SY-VLINE,048 'CURRENT',
061 SY-VLINE,065 'FROM ',V_COUNT1,
079 SY-VLINE,083 'FROM ',V_COUNT2,
097 SY-VLINE,101 'FROM ',V_COUNT3,
115 SY-VLINE,119 'FROM ',V_COUNT4,
133 SY-VLINE,137 'FROM ',V_COUNT5,
151 SY-VLINE,155 'FROM ',V_COUNT6,
169 SY-VLINE,173 'FROM ',V_COUNT7,
187 SY-VLINE,191 'FROM ',V_COUNT8,
205 SY-VLINE,209 'FROM ',V_COUNT9,
223 SY-VLINE,228 'FROM ',V_COUNT10,
243 SY-VLINE,248 'TOTAL',
268 SY-VLINE.
WRITE:/ SY-VLINE,002 'Number',
12 SY-VLINE,
43 SY-VLINE,
061 SY-VLINE,065 'TO ',RASTBIS2,
079 SY-VLINE,083 'TO ',RASTBIS3,
097 SY-VLINE,101 'TO ',RASTBIS4,
115 SY-VLINE,119 'TO ',RASTBIS5,
133 SY-VLINE,137 'FROM ',RASTBIS6,
151 SY-VLINE,155 'FROM ',RASTBIS7,
169 SY-VLINE,173 'FROM ',RASTBIS8,
187 SY-VLINE,191 'FROM ',RASTBIS9,
205 SY-VLINE,209 'FROM ',RASTBIS0,
223 SY-VLINE,
243 SY-VLINE,
268 SY-VLINE,
SY-ULINE.
format color off.
===================================================================
END-OF-SELECTION ***************************
===================================================================
end-of-selection.
===================================================================
Form : Extract_Data *
===================================================================
form extract_data.
Select the Customers
Select t1~kunnr t2~name1
into corresponding fields of table customer_tab
from knb1 as t1 inner join kna1 as t2
on t2~kunnr = t1~kunnr
where t1~bukrs = p_bukrs
and t1~kunnr in s_kunnr
and t1~BUSAB in s_busab
and t2~regio in s_regio
and t2~BRSCH in s_BRSCH
and t2~KTOKD in s_KTOKD.
if sy-subrc <> 0.
message e398(00) with 'No Customers Selected'.
endif.
sort customer_tab.
describe table customer_tab lines v_ttlc.
v_ttlc = v_ttlc + 10.
loop at customer_tab.
v_net1 = 0.
v_net2 = 0.
v_net3 = 0.
v_net4 = 0.
v_net5 = 0.
v_net6 = 0.
v_net7 = 0.
v_net8 = 0.
v_net9 = 0.
v_net10 = 0.
v_net11 = 0.
v_net = 0.
perform calculate_ageing
using
p_bukrs
customer_tab-kunnr
dat
RASTBIS1
RASTBIS2
RASTBIS3
RASTBIS4
RASTBIS5
RASTBIS6
RASTBIS7
RASTBIS8
RASTBIS9
RASTBIS0
P_STAND
' ' "noted item
P_SPCAL
changing
v_net1
v_net2
v_net3
v_net4
v_net5
v_net6
v_net7
v_net8
v_net9
v_net10
v_net11
v_net.
if p_balyes = 'X' or v_net > 0.
format color col_total.
write:/ sy-vline,
002 customer_tab-kunnr,
012 SY-VLINE,013(30) customer_tab-name1,
043 SY-VLINE,044(16) v_net1,
061 SY-VLINE,062(16) v_net2,
079 SY-VLINE,080(16) v_net3,
097 SY-VLINE,098(16) v_net4,
115 SY-VLINE,116(16) v_net5,
133 SY-VLINE,134(16) v_net6,
151 SY-VLINE,152(16) v_net7,
169 SY-VLINE,170(16) v_net8,
187 SY-VLINE,188(16) v_net9,
205 SY-VLINE,206(16) v_net10,
223 SY-VLINE,224(16) v_net11,
239 SY-VLINE,240(16) v_net,
258 SY-VLINE.
format color off.
hide : customer_tab-kunnr.
v_ttlnet1 = v_ttlnet1 + v_net1.
v_ttlnet2 = v_ttlnet2 + v_net2.
v_ttlnet3 = v_ttlnet3 + v_net3.
v_ttlnet4 = v_ttlnet4 + v_net4.
v_ttlnet5 = v_ttlnet5 + v_net5.
v_ttlnet6 = v_ttlnet6 + v_net6.
v_ttlnet7 = v_ttlnet7 + v_net7.
v_ttlnet8 = v_ttlnet8 + v_net8.
v_ttlnet9 = v_ttlnet9 + v_net9.
v_ttlnet10 = v_ttlnet10 + v_net10.
v_ttlnet11 = v_ttlnet11 + v_net11.
v_ttlnet = v_ttlnet + v_net.
endif.
endloop.
ULINE.
format color col_total.
write:/ sy-vline,
012 SY-VLINE,012(30) ' T O T A L',
043 SY-VLINE,044(16) v_ttlnet1,
061 SY-VLINE,062(16) v_ttlnet2,
079 SY-VLINE,080(16) v_ttlnet3,
097 SY-VLINE,098(16) v_ttlnet4,
115 SY-VLINE,116(16) v_ttlnet5,
133 SY-VLINE,134(16) v_ttlnet6,
151 SY-VLINE,152(16) v_ttlnet7,
169 SY-VLINE,170(16) v_ttlnet8,
187 SY-VLINE,188(16) v_ttlnet9,
205 SY-VLINE,206(16) v_ttlnet10,
223 SY-VLINE,224(16) v_ttlnet11,
239 SY-VLINE,240(16) v_ttlnet,
258 SY-VLINE.
format color off.
ULINE.
endform.
Function to Calculate Aging.
Form calculate_ageing using
bukrs
kunnr
dat
RASTBIS1
RASTBIS2
RASTBIS3
RASTBIS4
RASTBIS5
RASTBIS6
RASTBIS7
RASTBIS8
RASTBIS9
RASTBIS0
P_STAND
P_NOTED
P_SPCAL
changing
v_net1
v_net2
v_net3
v_net4
v_net5
v_net6
v_net7
v_net8
v_net9
v_net10
v_net11
v_net.
DATA: BEGIN OF BSID_TAB1 OCCURS 0,
BUKRS LIKE BSID-BUKRS,
PRCTR LIKE BSID-PRCTR,
KUNNR LIKE BSID-KUNNR,
FLAG(1),
UMSKZ LIKE BSID-UMSKZ,
BLART LIKE BSID-BLART,
BELNR LIKE BSID-BELNR,
BUZEI LIKE BSID-BUZEI,
NETDT LIKE BSID-ZFBDT,
ZFBDT LIKE BSID-ZFBDT,
BUDAT LIKE BSID-BUDAT,
BLDAT LIKE BSID-BLDAT,
BSCHL LIKE BSID-BSCHL,
DMBTR LIKE BSID-DMBTR,
SHKZG LIKE BSID-SHKZG,
ZBD1T LIKE BSID-ZBD1T,
ZBD2T LIKE BSID-ZBD2T,
ZBD3T LIKE BSID-ZBD3T,
REBZG LIKE BSID-REBZG,
REBZT LIKE BSID-REBZT,
KOART LIKE BSEG-KOART,
SK1DT LIKE FAEDE-SK1DT,
SK2DT LIKE FAEDE-SK2DT,
DAYSD LIKE SY-TABIX,
END OF BSID_TAB1.
RANGES: R_UMSKZ FOR BSID-UMSKZ.
Data : V_ZFBDT Like bsid-ZFBDT,
V_ZBD1T Like bsid-ZBD1T,
V_ZBD2T Like bsid-ZBD2T,
V_ZBD3T Like bsid-ZBD3T,
V_LINES(8) TYPE n.
IF P_NOTED = 'X'. "CHECK NOTED ITEMS
R_UMSKZ-SIGN = 'I'.
R_UMSKZ-OPTION = 'EQ'.
R_UMSKZ-LOW = 'D'.
APPEND R_UMSKZ.
R_UMSKZ-SIGN = 'I'.
R_UMSKZ-OPTION = 'EQ'.
R_UMSKZ-LOW = 'L'.
APPEND R_UMSKZ.
ENDIF.
IF P_STAND = 'X'. "CHECK STANDARD ITEMS
R_UMSKZ-SIGN = 'I'.
R_UMSKZ-OPTION = 'EQ'.
R_UMSKZ-LOW = ' '.
APPEND R_UMSKZ.
ENDIF.
IF P_SPCAL = 'X'. "CHECK SPECIAL G/L TRANSACTION
R_UMSKZ-SIGN = 'I'.
R_UMSKZ-OPTION = 'EQ'.
R_UMSKZ-LOW = 'A'.
APPEND R_UMSKZ.
R_UMSKZ-SIGN = 'I'.
R_UMSKZ-OPTION = 'EQ'.
R_UMSKZ-LOW = 'B'.
APPEND R_UMSKZ.
ENDIF.
SELECT * FROM BSID INTO CORRESPONDING FIELDS OF TABLE BSID_TAB
WHERE BUKRS = BUKRS AND
budat <= dat AND
KUNNR = KUNNR AND
UMSKZ in R_UMSKZ.
SELECT * FROM BSAD appending CORRESPONDING FIELDS OF TABLE BSID_TAB
WHERE BUKRS = BUKRS AND
budat <= dat AND
augdt >= dat AND
KUNNR = KUNNR AND
UMSKZ in R_UMSKZ.
DESCRIBE TABLE BSID_TAB LINES V_LINES.
LOOP AT BSID_TAB.
if bsid_tab-BLART = 'DZ'.
Select single ZFBDT ZBD1T ZBD2T ZBD3T
into (V_ZFBDT,V_ZBD1T,V_ZBD2T,V_ZBD3T)
from bsid where BUKRS = BUKRS
and kunnr = bsid_tab-kunnr
and BELNR = bsid_tab-REBZG.
if sy-subrc = 0.
bsid_tab-ZFBDT = V_ZFBDT.
bsid_tab-ZBD1T = V_ZBD1T.
bsid_tab-ZBD2T = V_ZBD2T.
bsid_tab-ZBD3T = V_ZBD3T.
else.
Select single ZFBDT ZBD1T ZBD2T ZBD3T
into (V_ZFBDT,V_ZBD1T,V_ZBD2T,V_ZBD3T)
from bsad where BUKRS = BUKRS
and kunnr = bsid_tab-kunnr
and BELNR = bsid_tab-REBZG.
if sy-subrc <> 0.
bsid_tab-ZFBDT = V_ZFBDT.
bsid_tab-ZBD1T = V_ZBD1T.
bsid_tab-ZBD2T = V_ZBD2T.
bsid_tab-ZBD3T = V_ZBD3T.
endif.
endif.
endif.
IF BSID_TAB-SHKZG = 'H'.
BSID_TAB-DMBTR = BSID_TAB-DMBTR * ( - 1 ).
ENDIF.
bsid_tab-netdt = bsid_tab-ZFBDT.
bsid_tab-netdt = bsid_tab-budat.
bsid_tab-koart = 'D'.
MODIFY BSID_TAB.
PERFORM CALC_DUE_DATE USING BSID_TAB.
BSID_TAB-DAYSD = DAT - BSID_TAB-NETDT.
IF BSID_TAB-DAYSD <= RASTBIS1.
V_NET1 = V_NET1 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS2.
V_NET2 = V_NET2 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS3.
V_NET3 = V_NET3 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS4.
V_NET4 = V_NET4 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS5.
V_NET5 = V_NET5 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS6.
V_NET6 = V_NET6 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS7.
V_NET7 = V_NET7 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS5.
V_NET8 = V_NET8 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS9.
V_NET9 = V_NET9 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS0.
V_NET10 = V_NET10 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD > RASTBIS0.
V_NET11 = V_NET11 + BSID_TAB-DMBTR.
ENDIF.
V_NET = V_NET + BSID_TAB-DMBTR.
MODIFY BSID_TAB.
ENDLOOP.
endform.
Calculate Due Date
FORM CALC_DUE_DATE USING P_BSID_TAB STRUCTURE BSID_TAB.
DATA : REFE TYPE P.
IF P_BSID_TAB-KOART = 'K' OR P_BSID_TAB-KOART = 'D'.
IF P_BSID_TAB-ZFBDT IS INITIAL.
P_BSID_TAB-ZFBDT = P_BSID_TAB-BLDAT.
ENDIF.
*Nettofälligkeit bestimmen--
IF NOT P_BSID_TAB-ZBD3T IS INITIAL.
REFE = P_BSID_TAB-ZBD3T.
ELSE.
IF NOT P_BSID_TAB-ZBD2T IS INITIAL.
REFE = P_BSID_TAB-ZBD2T.
ELSE.
REFE = P_BSID_TAB-ZBD1T.
ENDIF.
ENDIF.
*Nichtrechnungsbezogene Gutschriften sind sofort fällig--
IF P_BSID_TAB-KOART = 'D' AND P_BSID_TAB-SHKZG = 'H'
OR P_BSID_TAB-KOART = 'K' AND P_BSID_TAB-SHKZG = 'S'.
IF P_BSID_TAB-REBZG IS INITIAL.
REFE = 0.
ENDIF.
ENDIF.
P_BSID_TAB-NETDT = P_BSID_TAB-ZFBDT + REFE.
*Skontofälligkeiten bestimmen--
IF NOT P_BSID_TAB-ZBD2T IS INITIAL.
P_BSID_TAB-SK2DT = P_BSID_TAB-ZFBDT + P_BSID_TAB-ZBD2T.
ELSE.
P_BSID_TAB-SK2DT = P_BSID_TAB-NETDT.
ENDIF.
IF NOT P_BSID_TAB-ZBD1T IS INITIAL
OR NOT P_BSID_TAB-ZBD2T IS INITIAL.
P_BSID_TAB-SK1DT = P_BSID_TAB-ZFBDT + P_BSID_TAB-ZBD1T.
ELSE.
P_BSID_TAB-SK1DT = P_BSID_TAB-NETDT.
ENDIF.
*Nichtrechnungsbezogene Gutschriften sind sofort fällig--
IF P_BSID_TAB-KOART = 'D' AND P_BSID_TAB-SHKZG = 'H'
OR P_BSID_TAB-KOART = 'K' AND P_BSID_TAB-SHKZG = 'S'.
IF P_BSID_TAB-REBZG IS INITIAL.
P_BSID_TAB-SK2DT = P_BSID_TAB-NETDT.
P_BSID_TAB-SK1DT = P_BSID_TAB-NETDT.
ENDIF.
ENDIF.
ELSE.
MESSAGE E122 RAISING ACCOUNT_TYPE_NOT_SUPPORTED.
ENDIF.
E_FAEDE = FAEDE.
ENDFORM.Hi,
As vijay said...
1.Declare One final Internal table which you want to show the data
2 . populate the fieldcatalog using the FM or Manually using the itab in step1
3. Collect the Data into final internal table which you created in Step 1.
4. pass the fieldcat and Internal table to ALV FM.
chk out the prg below i have created your program but i donn knw wht are the output fields... chk your prg
*REPORT ZALVTEST .
REPORT ZSAMPLE line-size 260
line-count 65
no standard page heading.
TYPE-POOLS: SLIS.
====================================================================
TABLES *********************************
====================================================================
tables : bseg,
bkpf,
kna1,
bsid,
bsad,
knb1.
data : begin of customer_tab occurs 0,
kunnr like kna1-kunnr,
name1 like kna1-name1,
flag(1) type c,
end of customer_tab.
data : begin of customerdoc_tab occurs 0,
kunnr like kna1-kunnr,
belnr like bkpf-belnr,
gjahr like bkpf-gjahr,
monat like bkpf-monat,
end of customerdoc_tab.
data : begin of doc_tab occurs 0,
belnr like bkpf-belnr,
gjahr like bkpf-gjahr,
monat like bkpf-monat,
end of doc_tab.
DATA: BEGIN OF BSID_TAB OCCURS 0,
BUKRS LIKE BSID-BUKRS,
PRCTR LIKE BSID-PRCTR,
KUNNR LIKE BSID-KUNNR,
FLAG(1),
UMSKZ LIKE BSID-UMSKZ,
BLART LIKE BSID-BLART,
BELNR LIKE BSID-BELNR,
BUZEI LIKE BSID-BUZEI,
NETDT LIKE BSID-ZFBDT,
ZFBDT LIKE BSID-ZFBDT,
BUDAT LIKE BSID-BUDAT,
BLDAT LIKE BSID-BLDAT,
BSCHL LIKE BSID-BSCHL,
DMBTR LIKE BSID-DMBTR,
SHKZG LIKE BSID-SHKZG,
ZBD1T LIKE BSID-ZBD1T,
ZBD2T LIKE BSID-ZBD2T,
ZBD3T LIKE BSID-ZBD3T,
REBZG LIKE BSID-REBZG,
REBZT LIKE BSID-REBZT,
KOART LIKE BSEG-KOART,
SK1DT LIKE FAEDE-SK1DT,
SK2DT LIKE FAEDE-SK2DT,
DAYSD LIKE SY-TABIX,
END OF BSID_TAB.
ranges : r_bukrs for bsid-bukrs,
r_kunnr for kna1-kunnr.
===================================================================
VARIABLES *******************************
===================================================================
data : v_belnr like bseg-belnr,
v_gjahr like bkpf-gjahr,
v_monat like bkpf-monat,
v_ttlc type p,
v_flag(1) type c,
V_COUNT1(4) TYPE N,
V_COUNT2(4) TYPE N,
V_COUNT3(4) TYPE N,
V_COUNT4(4) TYPE N,
V_COUNT5(4) TYPE N,
V_COUNT6(4) TYPE N,
V_COUNT7(4) TYPE N,
V_COUNT8(4) TYPE N,
V_COUNT9(4) TYPE N,
V_COUNT10(4) TYPE N,
V_NET1 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 1
V_NET2 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 2
V_NET3 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 3
V_NET4 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 4
V_NET5 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 5
V_NET6 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 6
V_NET7 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 7
V_NET8 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 8
V_NET9 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 9
V_NET10 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 10
V_NET11 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 11
V_NET LIKE BSID-DMBTR, "Total Balance of Customer
V_ttlNET1 LIKE BSID-DMBTR,
V_ttlNET2 LIKE BSID-DMBTR,
V_ttlNET3 LIKE BSID-DMBTR,
V_ttlNET4 LIKE BSID-DMBTR,
V_ttlNET5 LIKE BSID-DMBTR,
V_ttlNET6 LIKE BSID-DMBTR,
V_ttlNET7 LIKE BSID-DMBTR,
V_ttlNET8 LIKE BSID-DMBTR,
V_ttlNET9 LIKE BSID-DMBTR,
V_ttlNET10 LIKE BSID-DMBTR,
V_ttlNET11 LIKE BSID-DMBTR,
V_ttlNET LIKE BSID-DMBTR,
v_kunnr like bseg-kunnr,
V_BUTXT like t001-butxt.
********Declare Data Areas for List Viewer ***********
DATA: FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
FIELDCAT_LN LIKE LINE OF FIELDCAT,
FIELD TYPE SLIS_FIELDNAME,
COL_POS TYPE I ,
PGM LIKE SY-REPID,
FIELD_VALUE(20),
TABLE_NAME(10).
===================================================================
SELECTION SCREEN ****************************
===================================================================
selection-screen begin of block b1 with frame title text-001.
parameters : p_bukrs like bseg-bukrs obligatory.
select-options : s_kunnr for kna1-kunnr,
s_BRSCH for kna1-BRSCH,
s_REGIO for kna1-REGIO,
s_KTOKD for kna1-KTOKD,
s_BUSAB for knb1-BUSAB.
selection-screen: end of block b1.
selection-screen begin of block b2 with frame title text-003.
PARAMETERS: DAT LIKE SY-DATUM DEFAULT SY-DATUM.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 01(30) TEXT-002.
SELECTION-SCREEN POSITION POS_LOW.
*PARAMETERS: RASTBIS1 LIKE RFPDO1-ALLGROGR DEFAULT '000'.
*PARAMETERS: RASTBIS2 LIKE RFPDO1-ALLGROGR DEFAULT '030'.
*PARAMETERS: RASTBIS3 LIKE RFPDO1-ALLGROGR DEFAULT '060'.
*PARAMETERS: RASTBIS4 LIKE RFPDO1-ALLGROGR DEFAULT '090'.
*PARAMETERS: RASTBIS5 LIKE RFPDO1-ALLGROGR DEFAULT '120'.
PARAMETERS: RASTBIS1(4) type n DEFAULT '0000'.
PARAMETERS: RASTBIS2(4) type n DEFAULT '0030'.
PARAMETERS: RASTBIS3(4) type n DEFAULT '0060'.
PARAMETERS: RASTBIS4(4) type n DEFAULT '0090'.
PARAMETERS: RASTBIS5(4) type n DEFAULT '0120'.
PARAMETERS: RASTBIS6(4) type n DEFAULT '0150'.
PARAMETERS: RASTBIS7(4) type n DEFAULT '0180'.
PARAMETERS: RASTBIS8(4) type n DEFAULT '0210'.
PARAMETERS: RASTBIS9(4) type n DEFAULT '0240'.
PARAMETERS: RASTBIS0(4) type n DEFAULT '0270'.
SELECTION-SCREEN END OF LINE.
Noted item removed as per FI instruction
PARAMETERS: P_STAND AS CHECKBOX default 'X',
P_NOTED AS CHECKBOX ,
P_SPCAL AS CHECKBOX .
selection-screen: end of block b2.
selection-screen begin of block b3 with frame.
PARAMETERS: allgline like RFPDO1-allgline .
Parameters : p_balyes type c radiobutton group grp9 default 'X',
p_balno type c radiobutton group grp9.
selection-screen: end of block b3.
Check for the Select option
AT SELECTION-SCREEN.
IF P_STAND = '' AND P_SPCAL = '' .
MESSAGE E398(00) WITH 'PLEASE CHOOSE AT LEAST ONE G/L INDICATOR!'.
ENDIF.
Check for Company code Authorization
authority-check object 'F_BKPF_BUK'
ID 'BUKRS' FIELD p_bukrs
ID 'ACTVT' FIELD '03'.
if sy-subrc ne 0.
message e398(00) with 'You are not Authorized for CC ' p_bukrs.
Endif.
===================================================================
START-OF-SELECTION ****************************
===================================================================
START-OF-SELECTION.
V_COUNT1 = RASTBIS1 + 1.
V_COUNT2 = RASTBIS2 + 1.
V_COUNT3 = RASTBIS3 + 1.
V_COUNT4 = RASTBIS4 + 1.
V_COUNT5 = RASTBIS5 + 1.
V_COUNT6 = RASTBIS6 + 1.
V_COUNT7 = RASTBIS7 + 1.
V_COUNT8 = RASTBIS8 + 1.
V_COUNT9 = RASTBIS9 + 1.
V_COUNT10 = RASTBIS0 + 1.
perform extract_data.
Build Field Catalogs **************************
PERFORM BUILD_FIELDCAT.
*******Start List Viewer *******************************
PERFORM START_LIST_VIEWER.
===================================================================
At line Selection *****************************
===================================================================
at line-selection.
if sy-lilli >= 9 .
refresh r_bukrs.
move p_bukrs to r_bukrs-low.
move 'I' to r_bukrs-sign.
move 'EQ' to r_bukrs-option.
append r_bukrs.
refresh r_kunnr.
move customer_tab-kunnr to r_kunnr-low.
move 'I' to r_kunnr-sign.
move 'EQ' to r_kunnr-option.
append r_kunnr.
submit ZFARVR0040 and return
with p_bukrs = p_bukrs
with dat = dat
with p_stand = p_stand
with p_spcal = P_SPCAL
with s_kunnr in r_kunnr.
endif.
===================================================================
Top of Page *******************************
===================================================================
TOP-OF-PAGE.
SELECT SINGLE BUTXT FROM T001 INTO V_BUTXT
WHERE BUKRS = p_BUKRS .
WRITE:/73'Customers Aging Analysis',140'PAGE NO.',
SY-PAGNO.
WRITE:/002 'COMPANY',
011 P_BUKRS,
017 V_BUTXT,
055 allgline centered,
140 'DATE :',
150 sy-datum .
write:/002 'User',
011 sy-UNAME,
140 'Time :',
150 sy-UZEIT.
SKIP.
format color col_heading intensified off.
WRITE:/ SY-ULINE,
SY-VLINE,002 'Customer',
012 SY-VLINE,013 'Name',
043 SY-VLINE,048 'CURRENT',
061 SY-VLINE,065 'FROM ',V_COUNT1,
079 SY-VLINE,083 'FROM ',V_COUNT2,
097 SY-VLINE,101 'FROM ',V_COUNT3,
115 SY-VLINE,119 'FROM ',V_COUNT4,
133 SY-VLINE,137 'FROM ',V_COUNT5,
151 SY-VLINE,155 'FROM ',V_COUNT6,
169 SY-VLINE,173 'FROM ',V_COUNT7,
187 SY-VLINE,191 'FROM ',V_COUNT8,
205 SY-VLINE,209 'FROM ',V_COUNT9,
223 SY-VLINE,228 'FROM ',V_COUNT10,
243 SY-VLINE,248 'TOTAL',
268 SY-VLINE.
WRITE:/ SY-VLINE,002 'Number',
12 SY-VLINE,
43 SY-VLINE,
061 SY-VLINE,065 'TO ',RASTBIS2,
079 SY-VLINE,083 'TO ',RASTBIS3,
097 SY-VLINE,101 'TO ',RASTBIS4,
115 SY-VLINE,119 'TO ',RASTBIS5,
133 SY-VLINE,137 'FROM ',RASTBIS6,
151 SY-VLINE,155 'FROM ',RASTBIS7,
169 SY-VLINE,173 'FROM ',RASTBIS8,
187 SY-VLINE,191 'FROM ',RASTBIS9,
205 SY-VLINE,209 'FROM ',RASTBIS0,
223 SY-VLINE,
243 SY-VLINE,
268 SY-VLINE,
SY-ULINE.
format color off.
===================================================================
END-OF-SELECTION ***************************
===================================================================
end-of-selection.
===================================================================
Form : Extract_Data *
===================================================================
form extract_data.
Select the Customers
Select t1~kunnr t2~name1
into corresponding fields of table customer_tab
from knb1 as t1 inner join kna1 as t2
on t2~kunnr = t1~kunnr
where t1~bukrs = p_bukrs
and t1~kunnr in s_kunnr
and t1~BUSAB in s_busab
and t2~regio in s_regio
and t2~BRSCH in s_BRSCH
and t2~KTOKD in s_KTOKD.
if sy-subrc <> 0.
message e398(00) with 'No Customers Selected'.
endif.
sort customer_tab.
describe table customer_tab lines v_ttlc.
v_ttlc = v_ttlc + 10.
loop at customer_tab.
v_net1 = 0.
v_net2 = 0.
v_net3 = 0.
v_net4 = 0.
v_net5 = 0.
v_net6 = 0.
v_net7 = 0.
v_net8 = 0.
v_net9 = 0.
v_net10 = 0.
v_net11 = 0.
v_net = 0.
perform calculate_ageing
using
p_bukrs
customer_tab-kunnr
dat
RASTBIS1
RASTBIS2
RASTBIS3
RASTBIS4
RASTBIS5
RASTBIS6
RASTBIS7
RASTBIS8
RASTBIS9
RASTBIS0
P_STAND
' ' "noted item
P_SPCAL
changing
v_net1
v_net2
v_net3
v_net4
v_net5
v_net6
v_net7
v_net8
v_net9
v_net10
v_net11
v_net.
if p_balyes = 'X' or v_net > 0.
format color col_total.
write:/ sy-vline,
002 customer_tab-kunnr,
012 SY-VLINE,013(30) customer_tab-name1,
043 SY-VLINE,044(16) v_net1,
061 SY-VLINE,062(16) v_net2,
079 SY-VLINE,080(16) v_net3,
097 SY-VLINE,098(16) v_net4,
115 SY-VLINE,116(16) v_net5,
133 SY-VLINE,134(16) v_net6,
151 SY-VLINE,152(16) v_net7,
169 SY-VLINE,170(16) v_net8,
187 SY-VLINE,188(16) v_net9,
205 SY-VLINE,206(16) v_net10,
223 SY-VLINE,224(16) v_net11,
239 SY-VLINE,240(16) v_net,
258 SY-VLINE.
format color off.
hide : customer_tab-kunnr.
v_ttlnet1 = v_ttlnet1 + v_net1.
v_ttlnet2 = v_ttlnet2 + v_net2.
v_ttlnet3 = v_ttlnet3 + v_net3.
v_ttlnet4 = v_ttlnet4 + v_net4.
v_ttlnet5 = v_ttlnet5 + v_net5.
v_ttlnet6 = v_ttlnet6 + v_net6.
v_ttlnet7 = v_ttlnet7 + v_net7.
v_ttlnet8 = v_ttlnet8 + v_net8.
v_ttlnet9 = v_ttlnet9 + v_net9.
v_ttlnet10 = v_ttlnet10 + v_net10.
v_ttlnet11 = v_ttlnet11 + v_net11.
v_ttlnet = v_ttlnet + v_net.
endif.
endloop.
ULINE.
format color col_total.
write:/ sy-vline,
012 SY-VLINE,012(30) ' T O T A L',
043 SY-VLINE,044(16) v_ttlnet1,
061 SY-VLINE,062(16) v_ttlnet2,
079 SY-VLINE,080(16) v_ttlnet3,
097 SY-VLINE,098(16) v_ttlnet4,
115 SY-VLINE,116(16) v_ttlnet5,
133 SY-VLINE,134(16) v_ttlnet6,
151 SY-VLINE,152(16) v_ttlnet7,
169 SY-VLINE,170(16) v_ttlnet8,
187 SY-VLINE,188(16) v_ttlnet9,
205 SY-VLINE,206(16) v_ttlnet10,
223 SY-VLINE,224(16) v_ttlnet11,
239 SY-VLINE,240(16) v_ttlnet,
258 SY-VLINE.
format color off.
ULINE.
endform.
Function to Calculate Aging.
Form calculate_ageing using
bukrs
kunnr
dat
RASTBIS1
RASTBIS2
RASTBIS3
RASTBIS4
RASTBIS5
RASTBIS6
RASTBIS7
RASTBIS8
RASTBIS9
RASTBIS0
P_STAND
P_NOTED
P_SPCAL
changing
v_net1
v_net2
v_net3
v_net4
v_net5
v_net6
v_net7
v_net8
v_net9
v_net10
v_net11
v_net.
DATA: BEGIN OF BSID_TAB1 OCCURS 0,
BUKRS LIKE BSID-BUKRS,
PRCTR LIKE BSID-PRCTR,
KUNNR LIKE BSID-KUNNR,
FLAG(1),
UMSKZ LIKE BSID-UMSKZ,
BLART LIKE BSID-BLART,
BELNR LIKE BSID-BELNR,
BUZEI LIKE BSID-BUZEI,
NETDT LIKE BSID-ZFBDT,
ZFBDT LIKE BSID-ZFBDT,
BUDAT LIKE BSID-BUDAT,
BLDAT LIKE BSID-BLDAT,
BSCHL LIKE BSID-BSCHL,
DMBTR LIKE BSID-DMBTR,
SHKZG LIKE BSID-SHKZG,
ZBD1T LIKE BSID-ZBD1T,
ZBD2T LIKE BSID-ZBD2T,
ZBD3T LIKE BSID-ZBD3T,
REBZG LIKE BSID-REBZG,
REBZT LIKE BSID-REBZT,
KOART LIKE BSEG-KOART,
SK1DT LIKE FAEDE-SK1DT,
SK2DT LIKE FAEDE-SK2DT,
DAYSD LIKE SY-TABIX,
END OF BSID_TAB1.
RANGES: R_UMSKZ FOR BSID-UMSKZ.
Data : V_ZFBDT Like bsid-ZFBDT,
V_ZBD1T Like bsid-ZBD1T,
V_ZBD2T Like bsid-ZBD2T,
V_ZBD3T Like bsid-ZBD3T,
V_LINES(8) TYPE n.
IF P_NOTED = 'X'. "CHECK NOTED ITEMS
R_UMSKZ-SIGN = 'I'.
R_UMSKZ-OPTION = 'EQ'.
R_UMSKZ-LOW = 'D'.
APPEND R_UMSKZ.
R_UMSKZ-SIGN = 'I'.
R_UMSKZ-OPTION = 'EQ'.
R_UMSKZ-LOW = 'L'.
APPEND R_UMSKZ.
ENDIF.
IF P_STAND = 'X'. "CHECK STANDARD ITEMS
R_UMSKZ-SIGN = 'I'.
R_UMSKZ-OPTION = 'EQ'.
R_UMSKZ-LOW = ' '.
APPEND R_UMSKZ.
ENDIF.
IF P_SPCAL = 'X'. "CHECK SPECIAL G/L TRANSACTION
R_UMSKZ-SIGN = 'I'.
R_UMSKZ-OPTION = 'EQ'.
R_UMSKZ-LOW = 'A'.
APPEND R_UMSKZ.
R_UMSKZ-SIGN = 'I'.
R_UMSKZ-OPTION = 'EQ'.
R_UMSKZ-LOW = 'B'.
APPEND R_UMSKZ.
ENDIF.
SELECT * FROM BSID INTO CORRESPONDING FIELDS OF TABLE BSID_TAB
WHERE BUKRS = BUKRS AND
budat <= dat AND
KUNNR = KUNNR AND
UMSKZ in R_UMSKZ.
SELECT * FROM BSAD appending CORRESPONDING FIELDS OF TABLE BSID_TAB
WHERE BUKRS = BUKRS AND
budat <= dat AND
augdt >= dat AND
KUNNR = KUNNR AND
UMSKZ in R_UMSKZ.
DESCRIBE TABLE BSID_TAB LINES V_LINES.
LOOP AT BSID_TAB.
if bsid_tab-BLART = 'DZ'.
Select single ZFBDT ZBD1T ZBD2T ZBD3T
into (V_ZFBDT,V_ZBD1T,V_ZBD2T,V_ZBD3T)
from bsid where BUKRS = BUKRS
and kunnr = bsid_tab-kunnr
and BELNR = bsid_tab-REBZG.
if sy-subrc = 0.
bsid_tab-ZFBDT = V_ZFBDT.
bsid_tab-ZBD1T = V_ZBD1T.
bsid_tab-ZBD2T = V_ZBD2T.
bsid_tab-ZBD3T = V_ZBD3T.
else.
Select single ZFBDT ZBD1T ZBD2T ZBD3T
into (V_ZFBDT,V_ZBD1T,V_ZBD2T,V_ZBD3T)
from bsad where BUKRS = BUKRS
and kunnr = bsid_tab-kunnr
and BELNR = bsid_tab-REBZG.
if sy-subrc <> 0.
bsid_tab-ZFBDT = V_ZFBDT.
bsid_tab-ZBD1T = V_ZBD1T.
bsid_tab-ZBD2T = V_ZBD2T.
bsid_tab-ZBD3T = V_ZBD3T.
endif.
endif.
endif.
IF BSID_TAB-SHKZG = 'H'.
BSID_TAB-DMBTR = BSID_TAB-DMBTR * ( - 1 ).
ENDIF.
bsid_tab-netdt = bsid_tab-ZFBDT.
bsid_tab-netdt = bsid_tab-budat.
bsid_tab-koart = 'D'.
MODIFY BSID_TAB.
PERFORM CALC_DUE_DATE USING BSID_TAB.
BSID_TAB-DAYSD = DAT - BSID_TAB-NETDT.
IF BSID_TAB-DAYSD <= RASTBIS1.
V_NET1 = V_NET1 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS2.
V_NET2 = V_NET2 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS3.
V_NET3 = V_NET3 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS4.
V_NET4 = V_NET4 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS5.
V_NET5 = V_NET5 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS6.
V_NET6 = V_NET6 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS7.
V_NET7 = V_NET7 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS5.
V_NET8 = V_NET8 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS9.
V_NET9 = V_NET9 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS0.
V_NET10 = V_NET10 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD > RASTBIS0.
V_NET11 = V_NET11 + BSID_TAB-DMBTR.
ENDIF.
V_NET = V_NET + BSID_TAB-DMBTR.
MODIFY BSID_TAB.
ENDLOOP.
endform.
Calculate Due Date
FORM CALC_DUE_DATE USING P_BSID_TAB STRUCTURE BSID_TAB.
DATA : REFE TYPE P.
IF P_BSID_TAB-KOART = 'K' OR P_BSID_TAB-KOART = 'D'.
IF P_BSID_TAB-ZFBDT IS INITIAL.
P_BSID_TAB-ZFBDT = P_BSID_TAB-BLDAT.
ENDIF.
*Nettofälligkeit bestimmen--
IF NOT P_BSID_TAB-ZBD3T IS INITIAL.
REFE = P_BSID_TAB-ZBD3T.
ELSE.
IF NOT P_BSID_TAB-ZBD2T IS INITIAL.
REFE = P_BSID_TAB-ZBD2T.
ELSE.
REFE = P_BSID_TAB-ZBD1T.
ENDIF.
ENDIF.
*Nichtrechnungsbezogene Gutschriften sind sofort fällig--
IF P_BSID_TAB-KOART = 'D' AND P_BSID_TAB-SHKZG = 'H'
OR P_BSID_TAB-KOART = 'K' AND P_BSID_TAB-SHKZG = 'S'.
IF P_BSID_TAB-REBZG IS INITIAL.
REFE = 0.
ENDIF.
ENDIF.
P_BSID_TAB-NETDT = P_BSID_TAB-ZFBDT + REFE.
*Skontofälligkeiten bestimmen--
IF NOT P_BSID_TAB-ZBD2T IS INITIAL.
P_BSID_TAB-SK2DT = P_BSID_TAB-ZFBDT + P_BSID_TAB-ZBD2T.
ELSE.
P_BSID_TAB-SK2DT = P_BSID_TAB-NETDT.
ENDIF.
IF NOT P_BSID_TAB-ZBD1T IS INITIAL
OR NOT P_BSID_TAB-ZBD2T IS INITIAL.
P_BSID_TAB-SK1DT = P_BSID_TAB-ZFBDT + P_BSID_TAB-ZBD1T.
ELSE.
P_BSID_TAB-SK1DT = P_BSID_TAB-NETDT.
ENDIF.
*Nichtrechnungsbezogene Gutschriften sind sofort fällig--
IF P_BSID_TAB-KOART = 'D' AND P_BSID_TAB-SHKZG = 'H'
OR P_BSID_TAB-KOART = 'K' AND P_BSID_TAB-SHKZG = 'S'.
IF P_BSID_TAB-REBZG IS INITIAL.
P_BSID_TAB-SK2DT = P_BSID_TAB-NETDT.
P_BSID_TAB-SK1DT = P_BSID_TAB-NETDT.
ENDIF.
ENDIF.
ELSE.
MESSAGE E122 RAISING ACCOUNT_TYPE_NOT_SUPPORTED.
ENDIF.
E_FAEDE = FAEDE.
ENDFORM.
*& Form BUILD_FIELDCAT
FORM BUILD_FIELDCAT .
PGM = SY-REPID.
FIELD = 'give field name'.
TABLE_NAME = 'give table name'.
PERFORM FIELDCAT_FILL USING FIELD.
and so on for the no. of fields you want to display
ENDFORM. " BUILD_FIELDCAT
*& Form START_LIST_VIEWER
FORM START_LIST_VIEWER.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_CALLBACK_PROGRAM = PGM
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
I_STRUCTURE_NAME =
IS_LAYOUT =
IT_FIELDCAT = FIELDCAT
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = 'A'
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IR_SALV_LIST_ADAPTER =
IT_EXCEPT_QINFO =
I_SUPPRESS_EMPTY_DATA = ABAP_FALSE
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = FINAL TAB(OUTPUT STATEMENTS TABLE)
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
ENDFORM. " START_LIST_VIEWER
*& Form FIELDCAT_FILL
text
FORM FIELDCAT_FILL USING FIELD_VALUE.
ADD 1 TO COL_POS.
FIELDCAT_LN-REF_TABNAME = TABLE_NAME.
FIELDCAT_LN-FIELDNAME = FIELD_VALUE.
FIELDCAT_LN-KEY = SPACE.
FIELDCAT_LN-DO_SUM = SPACE.
FIELDCAT_LN-COL_POS = COL_POS.
FIELDCAT_LN-NO_OUT = SPACE.
FIELDCAT_LN-QFIELDNAME = SPACE.
FIELDCAT_LN-HOTSPOT = SPACE.
APPEND FIELDCAT_LN TO FIELDCAT.
ENDFORM. " FIELDCAT_FILL
Reward points if you find this helpful
Regards,
Harini -
I recently purchased, from the APP store, Lion for use on my MacBook Pro. To upgrade my IMac to Lion, need I make an additional purchase? If not, how do I facilitate the IMac upgrade?
No, you do not need to re purchase Lion. You can re download Lion on all your authorized Macs using the same Apple ID.
How to re download apps from the Mac App Store:
Open the App Store. From the menu bar click Store > Sign In
Click Purchases from the top of the App Store window.
Select which apps you want to re download. Then right or control click where you see Installed then click Install. -
Difficulty using a projector. I have a MBP 17" and am running 10.6.8. Often I need to make a Powerpoint or other presentation at a client and I want to connect my computer to their projector. Either it won't display on the projector at all. Once it displayed but the presentation mode was on the big screen and the presentation I wanted to show was on my MBP screen. I have the adapter( white ones) to attached to the projector cables. I am so frsutrated...it looks so silly not to have a computer work during a presentation..
Another problem one the rare occasion that it shows on the screen is that the presentation does show just my desk top. Any ideas?
Thanks !You often have to turn off Mirroring to be able to set the second "screen"s resolution to something reasonable. When you do, the two screens become an "Exceeded Desktop" joined along one edge, and the Arrange pane in displays prefs can allow you to specify what edge. Initially, it will show a vacant extension of the built-in screen's desktop.
The mouse moves freely across that shared edge, and can allow you to drag the presentation window across to the the projector screen and re-size it to fit. -
How can I play my ipod classic 30 G thru my home stereo system? The guy at Radio Shack sold me an adapter for the older, larger headphone adapter on my stereo receiver with an ipod attachment on the other end. It doesn't work. Do I need to make special settings on the ipod? Should it work? I read elsewhere that I need a Y connector. Thanks for any help.
The headphone jak on your stereo is an output, not an input. You cannot route music into your stereo throughthe headphone jack.
You can get a cable that connect from the headphone output of the ipod to the stereo inputs on your stereo:
http://www.amazon.com/gp/product/B000V0G2C4/ref=pd_lpo_k2_dp_sr_1?pf_rd_p=486539 851&pf_rd_s=lpo-top-stripe-1&pf_rd_t=201&pf_rd_i=B000YK1JAG&pf_rd_m=ATVPDKIKX0DE R&pf_rd_r=0MQ2G1EDXDZ3DYEW327X -
How to make menus always on top (Z-order)?
I searched the forums and see messages about using JLayeredPane for building GUIs that can have the Z-order of components controlled. Has anyone done that or know if you can for menus? I have a problem where the menus are displayed behind some log windows (JPanels) but I need to make sure they come up on top. Can anyone help me on how?
Thank you!!
I can't believe that Apple would "forget" a stay on top of windows feature.
It has been driving me mad.
...Apple, specifically, QT developers, are you listening? -
My news macbook air is saying I need to make available space on my start up disk... how do I do that? What files should I delete?
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Then reboot. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of your data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
To locate large files, you can use Spotlight. That method may not find large folders that contain a lot of small files.
You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install ODS in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders, sorted by size with the largest at the top. It may take a few minutes for ODS to finish scanning your files.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with ODS, quit it and also quit Terminal. -
I hope I'm in the right place since I was sort of redirected here Recently I have been receiving the message that my startup disc is full and that I need to make room by deleting files. At first I received the message when I left my computer unattended with my virtual machine on, using VMWare Fusion to run Windows. Recently though, I got the message when I left my computer unattended for about 6 hours without the virtual machine running. As an aside, I get extremely nervous when anything freezes VMWare because it is usually a nightmare to get back into Windows if I can at all without calling Tech Support. This new message however, appeared without the virtual machine active, so I was relieved that VMWare most likely was not the cause. After reading a number of Tech Support articles and Community discussion questions and answers, I started wondering if iTunes or the SMC firmware or a combination thereof may be causing the problems. Mind you I know nothing about the SMC stuff because as I said, I am really new to Mac and know very little about computer code or processors or any of that stuff. But I do know that iTunes has recently been giving me some trouble, such as opening on start up and I can't figure out why and messing around with my iTunes libraries. I also read about the SMC firmware and the computer's sleep cycle so that sort of made sense. But I seriously need advice from someone a lot smarter than me. So, before you ask, both iTunes and my SMC firmware are up to date. I'm running a mid-2007 iMac Intel Core 2 Duo Processor with 2.4 GHz of speed.
You may not need all this junk, but in case you do, since the message tells me to make room and delete files, here goes. Now, if I need to make space and delete files, this is where I get confused and it's probably very simple but I'm still a relatively new Mac user and I still can't seem to find all the info about my Mac! I'm not exactly sure how much space I have left on my hard drive. I had to replace my hard drive last December and the invoice says it is a 500 GB 7200 SATA hard drive. For some reason I thought I had more than that. Regardless, System Profiler shows 10.26 GB currently available, 499.76 used; I assume that the used portion includes my partitioned drive that has my virtual machine on it? I may be using the wrong language when calling it that but that's how I understand it as a "partitioned drive". Now, when looking at the System Profiler, under Volumes, Capacity 209 MB writable diskOs1 - I think this my Virtual Machine. I also have three Western Digital drives that I use for Time Machine and for pictures and music; however, as I said, I am still new with Macs and do not fully understand the file structure so there may be pictures on my Mac hard drive that are duplicated on 1 or more of my WD drives but I don't know how to find them or if I do, I'm afraid to delete them. Of these WD external drives, 1 is 500 GB and is full with Time Machine backups; the 2nd WD drive is 3 TB and has 2.18 TB available and is currently being used for Time Machine backups; the final WD drive is 1 TB Firewire and currently has 694.33 GB available.
Any help would be appreciated. Please forgive any inaccurate terms or mis-statements of terminology as I do not really know what I'm talking about as far as the pieces and parts of the operating system; I'm just trying my best to describe what I see.
One more piece of advice that I would appreciate would be recommendations about a good file cleaner, for duplicates, messy file structure, space utilization software; it also needs to be idiot proof software. I have a trial version of Appdelete that I never really used and I have the purchased version of Tune Up My Mac that I haven't spent much time with because I'm afraid I'll delete something I shouldn't
Thank you for your help
MemalynHi Memalyn
Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
Let us know what you find out, and if you manage to get your space back.
Matt -
HOW LONG TIME YOU NEED TO MAKE GPS TO WORK WITH OV...
Question to NOKIA:
HOW LONG TIME YOU NEED TO MAKE GPS TO WORK WITH OVI MAP 3.1 in N97?
On all N97 I know and as you can read here in forum the GPS doesn't work usable in N97 and with MAP 3.1.
I believe that this is a software problem because often I get a GPS signal inhouse and in the wood, but from one second to the other N97 lost the GPS signal. And this in the best weather condition under free sky. Sometimes gps signal works for 15 minutes, then the signal will drop every minute or so.
The current position on map is shift (past) abaout 40-50 meters from the real position, so its unable to use.
The calculated speed is always changing between 0 and the current speed.
I have updated phone to de newes software and firmware also to ne newest maps also has hard reseted and reformatet and the problem ist still the same. If I switch off the option "Maps improvment" (which SENDS DATA TO NOKIA!!!) the the drop outs are fewer. But evreytime the position on maps is shift about 40-50 Meters from right position. Is there a mistake in calculation the position? Also the speed is jumping sometimes from 0 to x and back.
CAN NOKIA TELL US WHEN THIS BUG WILL BE FIXED, AND CAN NOKIA OFFER US A REFUND.
I have payed a lot for N97 and alot for the navigation licence and a lot for accesoires and a lot for the traffic security assistance. So I want a working phone! I dint have payed money for e alpha-stadium phone.
If this is realy the quality of nokia phone, then It is the latest phone I have buyed from nokia.
By the way, the phone has many many many many other bugs as described in this forum.
Really bad work NOKIA! :-(
I was so excited with my N95 and now this mess...
NOKIA please answer us forum members, what you plan to do with the N97 bugs. When we can hope that the bugs are gone? Otherwise I will return my phone and want my money back and I sue for compensation.I have no word to disagree with you and hoping that Nokia soon will make some press statement or something else to tell us what they do with their flagship, sorry bugship Nokia N97.
Could be a shame recognize errors, but it's worst not to say nothing ant let the bad news of Nokia N97 spread for internet even if they want to sell a Nokia N97 Mini in the near future.
I understand and supose that we will no have no new version till september because we are in the last week and july and the activity in august decrease really high... but at least someone of Nokia could tell something about this problems and if it's possible all the other problems.
Why Nokia Beta Labs Forum there is a direct contact with Nokia workers, and in discussions is relly rare to find?
Yesterday is history.
Tomorrow is a mistery.
Today is a gift. -
I need to make a pdf document, already made in photoshop, 'page turn' and then add it to my website as an e-brochure. I know I can do this in indesign but indesign will not open pdf files for some inexplicable reason. Any ideas how I can do it without completely starting again?
Hello waitingone,
please try this (all terms are translated from my German programs to my best knowledge):
1. Did the creator of the pdf file enable the import options?
2. See import options: choose an other visibility option for your layer.
3. Let you show the import options and click into one with a black background and try these out (often a gray is selected).
4. See trimming: try the different modes there. Often works: "Media".
5. Is the pdf file (eg from Word) correctly created?
6. Is the PDF file protected? >>> no import possible.
7. If that does not help, store the pdf file in Acrobat, repair possible errors, run the PDF Optimizer before placing in InDesign.
Good luck!
Hans-Günter -
Need to make a print button in indesign
hi
I need to make a print button in indesign for a brochure. I have made several buttons by using the create button toll but there is no 'print' option in the list of behaviours.
can anyone help me with this please.
The final output is a pdf and the brochure has a print button on every page.
Can anyone help pleaseYou can duplicate any form field to all the pages you like... to all pages or just some pages.... Forms>Edit Fields>Duplicate
-
i have a line drawing (black on white paper) i have scanned and need to make the white paper transparent, maintaining the line drawing, can i and then HOW can i do this in PS? this is for my business logo. ive used it for years but with a solid background. id like to have it just be the drawing over my photos with a transparent background.
First let me apologize for posting a reply that was only suitable for advanced users. Photoshop is broad and powerful therefore has a huge learning curve. In fact I would state no one knows and uses all of Photoshop. When we first get Photoshop it intimidate us and we're very uncomfortable using it. Many thing are not intuitive there in much learning involved. After some time we begin to know something and we are able to do some thing. Learning become rapid and we start playing in Photoshop. It is very important to play with Photoshop. Playing with Photoshop and asking for help with in forums like this IMO is the best way to learn.
Photoshop Power lies in layers, selection and automation. However it takes knowledge to use photoshop well so most powerful tool you have ins Photoshop is the gray matter between your ears. Most at one time or another want to watermark or put a logo on their image. So its best to automate this process. All run into a problem in the process. "Size" We find our assets vary in size and aspect ratios. Landscape, Portraits, Panoramas and others. This complicates automation. Vector graphics works best when size vary greatly. If you can not work out how to create a vector solution like a custom shape. Create your Logo and watermark large thing scale down better the up. Text scale well for text uses vectors graphics however if you rasterize text it will not scale well.
I do not type or do English well so let me do some screen captures. I can not stress enough how important Black, White, Grays and Blending is when it come to image processing. Become friends with Multiply, Screen, Overlay and Luminosity blending.....
However when there is a white or black background though you can blend them you can not add a style like a drop shadow, emboss or make it invisible setting fill to 0 so only the style is visible. When there is contrast between the logo and background it is easy to separate the two. To select the background and delet it to have the logo with a transparent background. Many tools can be used to create the selection hee I use my action kill white.
Vector Shape would work better for scaling However it would be best to create the logo from scratch in a vector program like illustrator but I never had the resources to justify the Creative suite. I only had Photoshop. Recently Adobe gave me and other a year subscription to the creative suite for our participation here. I still have not installed anything but Photoshop, A while back I found a program that can create vector patf for black and white art work. It will not be as good as using something like illustrator. However vector paths can be edited in Photoshop and cleaned up some. Here is the PSD it 13MB because od the gradient http://www.mouseprints.net/old/dpr/AmPm24-7.psd -
i have an iPhone application already developed and it works great ,now i need to make that same application for my iPad .can someone please tell me step by step instructions on how to make it .
Try the developer's forum:
https://discussions.apple.com/community/developer_forums -
When I try to set up an Apple ID, it's asking for a credit card, and there is no "None" option, like this page suggests. How can I bypass this? This iPad is for a younger child who has no credit card, and will not need to make any purchases.
You can create an iTune and App Store account without credit card details
1. Sign out of current Apple ID if you are sign-in to one (important)
2. Go to App Store and select a free app
3. Tap INSTALL APP
4. Create New Apple ID
5. Confirm Your Country
6. Agree with Terms and Conditions
7. Fill in your Apple ID and Password (you must create a new Apple ID; don't use your old Apple ID)
8. Create and answer your secret question
9. Select NONE for Payment Method
10. Fill in Billing Address
11. Submit application for new Apple ID
12. Wait for verification email
13. When email arrive, verify your account
14. Start downloading your free apps
Maybe you are looking for
-
Error while accesing ABAP web dynpro application
Hi Experts, We are getting warning symbol on web page status bar, when we are accessing the ABAP web dynpro application only first page of application is getting loaded and when we click on page it is showing error on status bar and we can perform an
-
My Mac no longer gets text messages in the Messages app
I use a Macbook Air that had the Public Beta of Yosemite 10.10.2. I also use an iPhone 5s and a retina iPad mini. The iPhone and iPad have iOS 8.1.2 on them. I was able to get text messages on my Macbook Air and iPad up until January 20th. The last 3
-
My kid set a password on the touch and can't remember what it was and now it's locked up/disabled...
Help with password reset?
-
It seems that facebook/twitter sharing doesn't work from the gallery. Is there something that can be done to get it working?
-
Quantity proposal in Batch determination
Hi, We are doing the batch determination in Process order for Batch and HU managed Raw materials. I created two Process Orders Requirement for Raw Material A in Process Order 1 = 1000 Lbs Requirement for Raw Material A in Process Order 2 = 1200 Lbs S