Need to pull XP1I, XP2I.. tax rates to PO form

Hi All,
The PST and GST for Canada is shown to be 5% and 8% respectively in the PO (under Invoices tab when you click on the Taxes button) against condition types XP1I and XP2I for Tax Code I1 and a particular jurisdiction code. I want to pull these tax rates to the PO form and display it in the print, but I have been unsuccessfull so far as I could not find any table/FM that can return me the tax rates. Per my understanding, these rates are returned by Taxware of Canada.
Could anyone help me out with the procedure to pull the tax rates into the PO form?
Thank you all,
JD

no solution found

Similar Messages

Employee tax types and tax rates

Hi gurus,
I have a requirement in that i need to get the employee tax rates. Is tax rates are maintained in SAP or BSI. If tax rates are maintained in sap what are the tax rate tables. If they are maintained in BSI, is their any FM'S to get the those tax rates.
thanks
venkata

Hi,
If I understand your question correctly, you want to find out Employee tax rates. Check the following points.
1. If you see the RT table employee tax related wage types are typically denoted by EE prefix and employer tax related ones are denoted by ER prefix.
2. I believe you were able to run the simulation. Please try and open the schema log. Search for function "USTAX" in calculate taxes section. if further open each node therein you would find BSI taxes section in which you may be able to separate the EE and ER taxes.
3. In tax type description as well, in table T5UTT, you should see the text Employer or Employee to distinguish the taxes.
let me know if this helped. Or you can post to me few more details like may be RT table details so that I can help you with specific example.
Vandana

Sccm 2007 need to pull report of advertisements whose success rate is less then 80%

sccm 2007 need to pull report of all advertisements whose success rate is less then 80%

Why not using default reports and filtering out the one less than 80%?
107: Status of a specific advertisement
108: All system resource advertisements with status
Arnav Sharma | Facebook |
Twitter Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members
reading the thread.

Outbound delivery date in June and customer invoice post in July,tax rate?

Hi Experts
tax rate (June)=22%
tax rate (july)=24%
issue is Outbound delivery date in June and customer invoice post in July,so sytem taking tax rate =24% instead of 22%.Because outbound delivery is happened in June.
Please let me know that,
1)how system picking tax rate on base like billing date or service render date or ...?
2)how to take tax rate (june)=22% in July posting.
regards
sachin

Tax Rate is picked based on the pricing date.
You need to check with your SD collegue to configure the pricing date to be equal to outbound delivery date to pick the outbound delivery date based tax rates.
Regards,
Gaurav

Tax rates to be changes in scheduling agreement

I have lots of scheduling agreement which have been released as well. Now as per the new budget, we created new condition records and maintained new tax rates (excise duty from 12 to 12.50%).
we have a z program to perform GRN and it has logic written at SA line items basis so whenever we are doing GRN, it is picking old tax rates.
Is there a way i can change tax rates in PO/SA.
any function module is available.

we created new condition records
Any configuration change will not have any impact on existing documents. Having said this, if you have created a new condition type and added to your existing pricing procedure, it won't work for existing schedule agreements. You need to foreclose those and create new scheduling agreements. On the other hand, if there is a change in value, you can very well predate the existing condition record and create a new condition record with the revised structure. Once you done this, you can carry out mass price change
G. Lakshmipathi

List of tax code with tax rate

I need a list that give the tax code with the tax rate.
I can view this in SAP or witch table i look this.
Moderator: please do not log issues twice and crosspost into different (and wrong) forums. Thread relocated to ERP Financials and locked.

hi
>i wanna see the list of the tax code defined for the Service PO in its "invoice" tab.like for service tax we have three tax :
check T code FTXP
> tax code displayed to which the calculations are applied
check t code OBYZ
regards
kunal

Sub: Tax Combinatiom. Tax rate, tax Amount in the print lay out design of t

Dear all,
Sub: Tax Combinatiom. Tax rate, tax Amount in the print lay out design of the A/R Invoice
I have to Create a Print Lay out design of the A/R invoice for the Indain standrad please provide me some solutions for the following problems to locate the Tax combinations,Tax rate and the Tax amount in the PLD A/R Invoice ,
PACAKGE SAP B1 2005B
Need a standrad solution as per the requriment
Eg: Row Level
Tax Code created is BED+VAT
Tax combination details is
Name of Tax type   Rate
Excise                     16%
Ecess                    2%
Hcess                    1%
VAT                       4%
Row No     Item Qty   UnitPrice Tax code Total(LC)    Tax Amount
1             X      10     10000      BED+VAT   100000      21139
                                         (Excise =16000,Ecess=320, Hcess=160, VAT=4659)
2              Y      5      20000      BED+VAT    200000       42278
                                        (Excise =32000,Ecess=640, Hcess=320, VAT=9318)
In Print Lay out Design Requried is the deatils of Tax code combination , Rate and the Tax Amount in the followig way
Excise    16%   =48000
Ecess     2%    =960
Hcess     1%    =480
VAT       4%    =13977
Please send the feedback as early as possible urgently requried
for the further details send the feedback
Reagrds
Mr.Chitrasen

Hi experts,
       Pls anybody have an answer to my question, i'll be very thankfull to u,
                 I wanted to display the Tax Break ups in Invoice say,
ECess            25
Vat                 56
Excise duty    32
I've tried a lot with many of the SAP Forum thread but the results is not satisfactory..am using SAP Business One 2007 b
pls anybody who can guide me with step by step PLD creation for this problem.
I done the below steps in PLD
In Repetitive area 1
Field_1: Table-> OSTA
              Column-> Type
Field_2 : Table-> OSTA
              Column -> Code
Field_3: Table-> OSTA
              Column-> Rate
Field_4: Table-> OSTA
              Column-> Name
Field_5: Table-> A/R Invoice Tax amount per document
                Column-> Tax amount
Field_6 : Table-> A/R Invoice Tax amount per document
                Column-> Base amount
Field_7 : Formula -> Field_6 * Field_8
Field_8 :   Formula-> Field_1==1
      NOW I SORTED REPETITVE AREA 1 WITH 'SALES TAX AUTHORITIES;cODE' AND TICKED THE CHECK BOX 'SUMMARY'
    AND MADE THIS REPETITIVE AREA INVISIBLE.
IN Repetive area footer
F_01 :    Formula->   Field_4
F_02 :    Formula->   Concat(Round(F_rate,0), '%')
F_03 :    Formula->   Round(ColSum("F_tax_amount"),2)
I grouped the Repetitive area footer as Group 1
                            here i get the result but the Tax Rows are repeating and Tax amount varies for VAT for each rows
pls help me guys...
               Thanks in advance,
               Dinesh
Edited by: Dinesh S on Dec 23, 2011 1:28 PM

AP invoice with different tax rate and cost center?

Dear all,
We are just upgrade from 11i to R12.1.3. Before in 11i, we can change distribution account in AP invoice distribution line if the type is "Tax". However, after updated to R12, we define tax code (e.g. P1 for particular account combination), so once user selects tax code "P1" and invoice will automatic creates tax line for such invoice but the user cannot change distribution account anymore. Because in 11i, user will change the distribution account (cost center segment) but now in R12 user cannot change it.
The only work around is defining different tax code for different cost center.
For example: P1-0001 => 01.0000.999999.00001
P2-0001 => 01.0000.999999.00002
We have hundred of tax code and cost center combination.
Any other work around for this? or anyone encounter the same problem?
Please advice.
Thanks.

Let me explain more in details:
1) The cost centre will will more. 2 cost centres just a simple example.
For now, we have 5 cost centres for each of the tax rate. For the work around now, I need to define 5 tax codes for the same tax rate for different distribution combinations:
Quote
Tax Code ==>Tax Rate ==> AP Distribution Combination
A1-3500 ==> 10% ==>001.9999999.3500.00
A1-3600 ==> 10%==> 001.9999999.3600.00
A1-3700 ==> 10%==> 001.9999999.3700.00
A1-3800 ==> 10%==> 001.9999999.3800.00
A1-3900 ==> 10%==> 001.9999999.3900.00
2) The driving factor would be 100% percent.
Please kindly advice.
Many thanks.
driving factor for the cost centre

VAT tax rate question --invoices

Hello, I am working to configure NL VAT tax for the Netherlands. I have applied the EBTax Configuration Library and completed additional required setups. For Payables, the standard tax rate is being applied to each invoice upon creation. Per business requirements, the tax rate is situational or should be optional, (sometimes Reduced rate, or Exempt rate applies or both). Looking to eliminate default tax rate, having all available for a single transaction. I need a more manual entry approach, providing the user the ability to apply taxes as they are applicable. If anyone is working toward similiar goal input would be appreciated.
Thanks. Amanda.

I have figured it out that there were was extra record with Active_flag = 'N'
Cheers

Tax rate is not editable in r12.

HI.
I need to change the tax rate for a particular location in r12, In 11i has the option for do that by the navigation that "AR-->Setup-->Tax-->Locations",
but in r12 has the option in same navigation which one is in 11i, however that field is non-editable. so please kindly reply me that, how is make it as editable on the form that "Tax Locations and Rates".

Hi Hussein..
lot of thanks. I have still looking this issue. I try to change the TAX RATE of the particular location through Tax Managers responsibility by the navigation that
" Tax configuration-->tax rates" On this navigation will need to fill the given values are "Tax Regime Code, Tax Rate Code,Tax Jurisdiction Code,Configuration Owner", I do not know the correct values for it. I have give some related value of the area, it bring lot of results, Its very difficult to find the require data. That is why I unable to solve it. how is know it possible value to fill on that navigation?, how is solve it? Please give me the solution for increase the TAX RATES of given address that,
city:Chicago
county:Cook
state:IL
Country:United States
Thanks.

Tax rates in Spain

Hi all,
One of our customers have branch in Spain and we urgently need information about tax rates in Spain. If somebody can help and send me any information about it (prefferably in English)- I'll appreciate. My mail is
[email protected]
Thank you in advance,
Mark

For seen the option, you must mark the post as a question when you create it. But doesn´t really mather.
By the way, what are you implementing? Have you got only a customer in spain ? or is it an integration between some companys?
I´m interested on how did you face the integration. If possible, of course.
Ibai Peñ

04X Bonds Issuace - Tax Rate on Coupon not fix every payment

Hi,
I've a problem with product type 04x-Issued Bonds. Corresponding tax rate or amount for the scheduled coupon payment is not fix, therefore, a facility to maintain or adjust the tax amount every payment should be available. How do I do this in securities module? I've tried creating a condition type where I'll just enter the fixed amount in class master data but an error message pops-out that tells me I should report this to SAP. I cannot do this in other flows tab of the contract since once the contrace is settled, the tab is no longer editable and no payment date can be maintained.
Need your help on this guys.
Thanks
Chaikaru

Tax rate from tax code

Dear Gurus ,
I hv created one tax code A0 (using FTXP) and in that i have maintained three condition type JCES ( Service tax ) ,JECE ( Serviece tax edu.) ,JECD ( High edu cess) .
I maintained tax rate for each condition type as 12 %, 2% ,1%
resepectively .
However when i create condition record (VK11) for each condition type , i enter tax code , this automatically determines tax rate 12% for all condition types .
My concern is it has to take 12% , 2% % ,1 % as per condition type rate maintained in tax code .
Pls suggest me any inputs
Thanks in advance .
Anchal Pawar

Dear Anchal,
The condtion type can be created on application like S&D (V) and TAX (Tx).
Here, the condition type u have created is for TAX n u have created A0 tax code in FTXP.
To get the values ie. 12%, @%, & 1% in FTXP you need to create the condition record in FV11, with key combination as TAX CODE i.e., for the particular condition type & taxcode combination u give the percentage.
once u created the condition type in FV11, these values or % will be copied to FTXP condition type.
Hope, this i/p will serve the purpose and if you have arrived at the soln by any other mean please let us know.
With regards,
Vijayashree

Error in tax rate

Hi everyone,
I am facing a problem in tax on sales.For our client there are 2 types of CST tax rate for the customer: 4% and 1%(C Form).Accordingly 2 different tax codes are maintained for it.Now even after maintaining the different tax slabs in the customer master,during sales processing only the CST tax rate of 4 % is coming in the pricing. Its not picking the 1%(C Form) rate in the pricing.Can anyone please help me out from this situation? Its really very urgent.
Regards
Subhash

Dear subash,
You need to do two things,
I assume that the customer is same ,
then go to sales order , header -- billing -- alt tax classification-1 , put 1 and maintain the tax code for 4 % in VK11 aginst UTXJ at the verty first level with the 4% tax code.
and the same thing ,sales order , header -- billing -- alt tax classification-1 , put 2 and maintain the tax code for 1 % in VK11 aginst UTXJ at the verty first level with the 1% tax code.
In both the cases , customer tax classification is changing , hence system will pickup the correct one .
If customer is different , maintain the same in customer master - billing - UTXJ field instead of mainatining in the sales order.
Just try.
saravanan

Maintaing Tax rates in TAXINJ through VK19 or FV11

One more clarification I want.
As per SAP notes in TAXINJ we can use VK19 for maintaining the Excise condition % like JMOD ,JECS and J1AX otherwise we need to remove stastical mark from Taxinj then only we can put % for Ecxise in Tax code.
Fir Cess and SEcess ,SAP has released the config doc in which they are using VK19 for maintaing the these rates.
Offcourse JIN6 and JIN7 we are directly maintaining in FTXP.
If we are maintaining sale tax rate in FTXP we can see that values reflected in VK19 as well as in FV11 also for JIN6 and JIN7.Even all those values are store in one table KONP(KBETR)
Then why we cannot use VK19 in TAXINJ?
What excatly the problem we get if we do so.
I need your help Lakhsmi.
Regards
Sunil

Dear Sunil
Normally tax condition records are maintained for TAXINN.
VK11 for SD tax condition rates
FV11 for MM conditions
Thanks
Deepu Pillai

Need to pull XP1I, XP2I.. tax rates to PO form

Similar Messages

Maybe you are looking for