Need to see previous account number field in CRM

Hi Specialist's,
As part of our implementation project
There is a field in SAP r/3 ( Customer Master Data Tcode:Xd03) on Company Code Tab called Previous Account Number field ALTKN, table KNB1( Company Code Data ).
We need this information to go to CRM system.
I checked the field in table BUT000 in CRM but could not find any field containing this information.
Can someone let us know how can we see this information in CRM.
Also it would be helpful if you can tell under which screen,table and field can i get this information in CRM system.
Useful answers will definitely be rewarded with points .
Thanks,
Abhinav.

Dear RVI,
when You run the report then You can add by ALV the following two field that are hidden:
G/L Account     22     10
G/L Account     23     10
The first refers:
General Ledger Account HKONT
    This field contains the number of the G/L account to which the
    transaction figures are updated.
The second refers:
G/L Account Number SAKNR
     The G/L account number identifies the G/L account in a chart of
     accounts.
I hope this helps.
Mauri

Similar Messages

  • Does the R/3 Previous Account Number (KNB1-ALTKN) field exist in CRM?

    Hi
    I would like to know if the previous account number field for the business partner exist in CRM and if not, if it is possible to retrieve the current BP number by calling a R/3 function module or BADI from within CRM.
    In R/3 this field can be seen in transaction XD03. The value is taken from KNB1-ALTKN. I don't see where this field exists when maintaining the same BP in CRM.
    The idea is to extend the searches in the WebClient UI and for the user to enter in the previous account number with the result to show the current BP Account ID.
    Cheers
    Declan

    Hi,
    I have looked into your query.
    The field that you are talking about in this thread (Previous account number) is very specific for R/3 system. This field is not present in CRM system. So there are no BADIs available to get this detail on to the CRM system from R/3 system.
    In a case if you definitely need this field in CRM, you can write your own code to fetch this details into the BAPIMTCS structure and make use of the same in the CRM.
    I hope this helps.
    Regards,
    Venkat

  • Group & alternative account number field

    hi,
    1) i do not see group account number field in FS00, FSS0 or FS01/02/03 but i can see alternative account no. i know this alternative acc no is meant for country specific.
    why i cannot see this group acc number field?
    2) why i do not see country specific account show in alternative acc no? for example in obd4, there is sales acc and also local gaap sales account. when i disply operating sales acc, i do not see local gaap sales acc show in alternative acc number field.
    thanks

    hi,
    thanks alot. point given.
    1) may i know if local gaap account also in the same coa just like operating coa, then do we need to assign this local gaap account in alternative acc number field?
    2) why in the same coa, there have more than 1 type? operating gl acc, local gaap gl acc and also ifrs gl account.
    3) how do i know which account to post to as all of them in the same chart of acc?
    thanks

  • Idoc data - Need to see the full SDATA field value

    My SAP system is 4.6C. I need to see and extract the field data of the SDATA field in the EDID4 table. The field size in se11 is showing as of 1000 characters, but the field data when displaying is getting truncated. The message that comes below is Field SDATA is too wide to display (field will be truncated) --> Message no. MO 441 --> The field SDATA is more than 200 characters long. --> the system response comes as The field is output in a format restricted to 200 characters. So, it seems that the data after 200th character is getting truncated.
    How can i increase the display field of the SDATA field???

    It is not possible to view the IDoc data directly in the database. You need to use either WE05 transaction for an existing IDoc or WE60 to view the documentation and layout for each type.
    In a nutshell, there are different segments, each with their own layout, but it's not efficient to create database tables with separate fields for each segment. So all the data is stored in "raw" format and then, knowing the segment code, it may be correctly parsed into a readable format.

  • Search vendor by Previous Account Number in FK02

    Is there a way to search a vendor in FK02 by their previous account number (LFB1-ALTKN) ?

    Dear Kashif,
    You can create the match code in transaction OB50 for vendor (KRED). You can take help of your ABAPer to maintain the same. It is a simple one.
    You can also go through the below to have a feeling on Match COde:-
    http://help.sap.com/saphelp_40b/helpdata/fr/15/ec2c7dd435d1118b3f0060b03ca329/content.htm
    Regards,
    Gaurav

  • CUP: Mapping LDAP field to CUP Accounting Number field

    Hello CUP Experts,
    I have encountered a problem with the LDAP field mapping that I simply can't figure out on my own.
    We have a field named employeeNumber in our LDAP system, I want that employeeNumber to end up in the CUP field named Accounting Number and eventually hoping that this data will end up in the corresponding Accounting Number field in the back-end user master field.
    - This Accounting Number field is visible in the back-end system in SU01D on the Logon data tab in section Other Data.
    In the LDAP Mapping I have mapped a CUP field named ACCOUNTNR to the LDAP employeeNumber under additional fields.
    Is the CUP field named something else than ACCOUNTNR in CUP?
    Does anyone know of a solution to this problem or a similar problem?
    Thanks in advance,
    Stefan Ericsson
    +358-50-4867527

    Hi Stefan!
    Which issue exactly are you trying to solve:
    1. The LDAP field goes into the CUP request, but not into SU01
    2. The LDAP field does not even show up in CUP
    1) can be solved by maintaining Configuration - Field Mapping - Provisioning
    2) should work as you did it, alternatively you might be able to use a custom field (CAREFUL! once you use a custome field you'll never get it out of CUP again!)
    Kind regards,
    Frank.

  • SU01 Accounting Number field

    In releases up to 640, there used to be a report called RSSTAT10 that would produce a list of aggregated stats records (per account, if required).
    For some reason this has been discontinued as of 700.
    I always populate the Accounting Number field in SU01 so that if someone asks for detailed activity for an account, I would be in a position to quickly run this report (I am aware of the limitations caused by the size of the stats file and / or the currency of the appserver session).
    I have looked all over the place for documentation about the accounting number field : the best I can find is in the online help : <i>"For each user or user group, assign an account name or number of your choice. The user appears in the RZ accounting system (ACCOUNTING EXIT) under this number.
    A recommended account number would be the user’s cost center or company code, for example.
    You should always enter an account name or number in the SAP accounting system. The user will otherwise be assigned to a general category without account number."</i>
    This doesn't help me very much.   If anyone could shed some light on a new report that behaves similarly to RSSTAT10, or point me in the direction of some documentation on the ACCOUNTING EXIT / RZ Accounting System, I would be most grateful.

    Hi Stefan!
    Which issue exactly are you trying to solve:
    1. The LDAP field goes into the CUP request, but not into SU01
    2. The LDAP field does not even show up in CUP
    1) can be solved by maintaining Configuration - Field Mapping - Provisioning
    2) should work as you did it, alternatively you might be able to use a custom field (CAREFUL! once you use a custome field you'll never get it out of CUP again!)
    Kind regards,
    Frank.

  • In standard sap report S_ALR_87012103 i need to add previous account field.

    Hi experts,
    in standard sap report S_ALR_87012103 i need to add a previous account field can any one help me.
    Thanks in Advance.
    RVI

    Dear RVI,
    when You run the report then You can add by ALV the following two field that are hidden:
    G/L Account     22     10
    G/L Account     23     10
    The first refers:
    General Ledger Account HKONT
        This field contains the number of the G/L account to which the
        transaction figures are updated.
    The second refers:
    G/L Account Number SAKNR
         The G/L account number identifies the G/L account in a chart of
         accounts.
    I hope this helps.
    Mauri

  • Offset for Vendor Account Number(field VENDR) in table BSED

    Hello experts,
    I need to know the Offset where i can find the Vendor Account Number in field VENDR in the table BSED.
    This field is used for Localisation for TURKY in Reports like RFIDTRBOE1, RFIDTRBOE2.
    Thanks in advance!
    Regards,
    Sandeep

    Hi,
    Table LFA1 and ADR6 are right but in query, these tables will not be linled by system authomatically.
    You have to link these table manually by using field ADRNR in table LFA1 and field ADDRNUMBER in table ADR6.
    I hope it will resolve the issue.
    Regards,
    Vinod

  • Bank account number field in Infotype 0009

    Deal All,
    My client's requirement is that in IT0009 the length of Bank account number (BANKN) needs to be increased for a particular affiliate. Currently the length is 18 Character and my client wants to increase it to character 20 for a particular affiliate.
    Can anyone please let me know is it possible to do it. If it is not possible then what can be the other alternatives to met the requirement and the impacts of the alternatives.
    Thanks & Regards,
    Sandip Biswas.

    Dear Sandip,
    Please refer to SAP Note 193078 - Employee/applicant bank details in Russia.
    Maybe it is nor specific for your case but SAP recommends to maintain first two digits in Bank key field.
    Please make sure whether this solution works for your case.
    Regards,
    Dilek

  • Vendor Master Sensitive Field Confirmation (Account Number field) - Manual Payments

    Hi All,
    After reviewing a number of threads on this forum around what happens to payments when a vendor has a 'sensitive field' awaiting confirmation I had a a specific question around having the 'account number' as a sensitive field.
    I have an instance when the 'Account Number' has been defined a sensitive field. In an example scenario a user has changed the Vendor Bank Account number and it is awaiting confirmation (through using FK08). Whilst it is awaiting confirmation a manual payment is posted against that Vendor, which Vendor Account number is used, the old one or the new one awaiting confirmation?
    It also brings about the wider question of, if a sensitive field is awaiting confirmation and a payment is made against that Vendor what value is used, the old one or the new one that hasn't yet been confirmed?
    Any insight would be great, thanks.

    Hi Johnny
    We had a lenghty debate with SAP very recently and the thing is Automatic Payment (F110) wont happen if a Vendor is awaiting confirmation... But manual payments can be done
    So, the system does not stop you for manual payments F-53 or 58... It should pick up the latest Account number
    br, Ajay M

  • Offsetting account number field

    Hello,
    I have account based COPA. When I post a billing document I have a profit segment for account 704000 postings because account 704000 has profit segment mandatory in its field status, but there is another account in the accounting document that shouldn't have profit segment and has it.
    We have noticed that the second account is related to 704000 account through the field "offsetting account number"
    It is possible that the system post the second account to PA because of this relation?
    Thank you very much
    Regards

    Hi,
    Offsetting entries wil not post until you specify in automatic account determination i.e OKB9, Here you select rpofitability segment, then it will able to post in profitability segment.
    regards,
    sreekanth

  • Need help in formatting a number field with same precision for excel output

    I am trying to get the same preciision for a field in RTF template when the output is in EXCEL
    i.e. same number of digits after decimal. So, I would like to show 150 as 150.00 and 123.2 as 123.20 etc !! Is there a way to do it. the Built in formatting will not display 150.00 for 150 . but if i add $ symbol it will display. But i dont need $ syambol. please help.

    I found this on one of the forum questions.
    Excel dont preserve the trailing zeros.
    try opening the xcel and type 5.0000 and tab out, it wont preserve the trailing zeros after decimal.
    try finding out how to disable the option in excel. if you do that, you will see what you send out from the report.
    But you can try to convert the number into a text by trying to append a space at the beginning. See if that would work.
    Thanks
    Swarna

  • Previous Account Number customer master data

    FI Gurus,
    I want to be able to use field KNB1-ALTKN under company code data in master data. I want to use this field to store the old legacy customer number, but then I want ot be able to search when Ina doing customer search in FBL5N. Is there a way to do that?
    Thank You for your help.

    Hi Frank,
    Try this way.
    Go to SE36-> DDF->Extras-> selection views.
    origin of view -> SAP-> Change
    you can see Tables/Nodes on right hand side -> click page down.
    place cursor on KNB1 and click choose.
    In Table fields/Node fields
    click page down until you see ALTKN field.
    assign functional group 04 to the field and save.
    Note: Under origin of view ->SAP, this is provided by SAP. Make sure before you do change.
    Best Regards,
    Mohan.

  • Can't install from download. need to provide previous serial number, but how?

    Due to fried hard drive I need to re install CS 5 from My Orders. Entered the serial number got green check but then I was asked for serial number of a previous CS product. I have it but can find palace to enter it.
    Any help?
    Martin

    Error "The serial number is not valid for this product" | Creative Suite

Maybe you are looking for

  • Sound for both headphone and laptop speaker heard at the same time

    Hi, Need your help to solve this issue.I did tried all the necessary troubleshooting but still failed.FYI, im using compaq C700 which windows XP SP2 as a OS and Conexant HD Audio as a sound driver.Thanks in advance for ur kind adviced/assistant

  • Cannot sort email by sender

    I want to sort my email inbox by sender, but my Verizon FIOS only seems to allow sorting by Date, Unread, Attachments, and Starred. Why is that? This is the ONLY email system I have EVER seen that does not allow sorting by Sender. And please do not t

  • Premiere CC mac - media offline, crashes on relink

    Hi there. I've got a project which has had all it's files relocated to a different location. The first time I opened the project I sucesfully relinked everything and it ran smoothly. Now if I open the project or any previous version of it, premiere t

  • [CS5.5] How to import a snippet into the specific page

    Hi, I've a snippet file that export from page index 1 but I want to import back to page index 0, and vice versa. Is that possible? Regard, Nat.

  • Help making a folder's contents appear in iTunes.

    I use Mac Os X 10.6.8 on a Macbook Pro; ITunes 11.0.1 (12). I have a folder  ~/Music/iTunes/iTunes Music/Podcasts/MyFolder. This contains items that I would like to be available as a Playlist, or perhaps as a Smart Playlist. But I haven't been able t