Need to send data to excel spreadsheet

Hi All
I'm new in SSIS and need your help in one scenario.
I created 1 flat file connection manager that link to 1 CSV file. I also created 1 Flat file Source and use that flat file connection.
After that I created 1 unpivot transform and link it with that flat file source and then configure unpivot transformation and its working fine. Now I want the unpivot result in excel spread sheet and I don't know how to assign result in excel spread
sheet.
I tried to make excel connection manager and give excel file name and then connect it with unpivot but no luck. I think I'm missing something. Please help me out. Thanks

Follow the below step,
1. Create a new excel file(blank format i.e no header).
2. Create a connection pointing to excel file.
3. Add Excel Destination from data flow destination.
4. Drag the output of UNPIVOT to the excel destination.
5. Double click excel destination to open the editor.
6. Choose the excel connection you have created under connection manager dropdown.
7. Select Data excess mode as "Table or View"
8. Under "Name of Excel Sheet", Click the "NEW" button it will display you excel destination format. Supply the name. By default it is "Excel Destination". Click Ok. This will create a table in the excel sheet.
9. Select the Excel Sheet from the dropdown menu again. Check the preview button.
10. Go to Mapping tab and set the mapping of fields.
11. Finally press OK button.
Regards, RSingh

Similar Messages

I need format for data in excel file load into info cube to planning area.

Hi gurus,
I need format for data in excel file load into info cube to planning area.
can you send me what should i maintain header
i have knowledge on like
plant,location,customer,product,history qty,calander
100,delhi,suresh,nokia,250,2011211
if it is right or wrong can u explain and send me about excel file format.
babu

Hi Babu,
The file format should be same as you want to upload. The sequence of File format should be same communication structure.
Like,
Initial columns with Characteristics (ex: plant,location,customer,product)
date column (check for data format) (ex: calander)
Last columsn with Key figures (history qty)
Hope this helps.
Regards,
Nawanit

Sending data to EXCEL from Oracle Forms 6.0 URGENT!!!!!

Dear all,
I have a problem to which I hope to get a solution from anyone
out there...
The problem is as follows:
I have a form that contains some data. Now this data I need to
transfer to an excell sheet. I tried to do so through report
builder (6.0) but every time I try to convert my report I get a
general protection fault. So instead I'm sending the data to a
text file through text_io built in then reopening the text file
from excel. Isn't there a better way to do it? ie sending the
data stright from forms to excel?
Thanks in advance
null

TRY THIS OUT....OLE2.... IT WORKS GREAT...DIRECTLY TO EXCEL...
Oracle Corporate Support
Problem Repository
1. Prob# 1030046.6 NEW: OLE AUTOMATION NO LONGER WORKS AFTER
UPGRADE TO OF
2. Soln# 2077481.6 NEW: MICROSOFT CHANGED OLE INTERFACE FOR
OFFICE97
1. Prob# 1030046.6 NEW: OLE AUTOMATION NO LONGER WORKS AFTER
UPGRADE TO OF
Problem ID : 1030046.6
Affected Platforms : MS Windows 95
MS Windows NT
Affected Products : SQL*Forms
Oracle Reports
Oracle Graphics
Oracle Developer/2000
Affected Components : SF40 V04.05.XX
SQLREP V02.05.XX
ORAGRAPH V02.05.XX
DEV2K Generic
Affected Oracle Vsn : Generic
Summary:
NEW: OLE AUTOMATION NO LONGER WORKS AFTER UPGRADE TO OFFICE97
+=+
Problem Description:
====================
You have upgraded to Microsoft Office97 and OLE calls in your
Developer/2000
applications no longer work.
Problem Explanation:
====================
Examples:
You are using Forms to send data to a Microsoft Word document
and print
letters, using ole automation. This worked fine with Word 6.0,
but when
they
upgraded to Word 8.0 (Office97), the letters do not get printed.
When you try to get an object handle to the Excel97 Workbooks
collection
using
the OLE2 Package, you get the following error:
FRM-40735: WHEN-BUTTON-PRESSED trigger raised unhandled exception
ORA-305500
The Same code works fine against Excel 7.0.
[ Search Words: Office 97 msoffice ms office object linking and
embedding
application get_obj_property workbook invoke_obj
appshow
upgrade upgrading bug483090 olex.rdf demo ]
+==+
Diagnostics and References:
2. Soln# 2077481.6 NEW: MICROSOFT CHANGED OLE INTERFACE FOR
OFFICE97
Solution ID : 2077481.6
For Problem : 1030046.6
Affected Platforms : MS Windows 95
MS Windows NT
Affected Products : SQL*Forms
Oracle Reports
Oracle Graphics
Oracle Developer/2000
Affected Components : SF40 V04.05.XX
SQLREP V02.05.XX
ORAGRAPH V02.05.XX
DEV2K Generic
Affected Oracle Vsn : Generic
Summary:
NEW: MICROSOFT CHANGED OLE INTERFACE FOR OFFICE97
+=+
Solution Description:
=====================
WORD:
Microsoft made some changes in the upgraded version of Word
which cause it
to
come up as a hidden application. Customer had to add "AppShow"
to his code,
and ole automation works fine now.
EXCEL:
The issue here is that Microsoft changed the object "Workbooks",
which is
now
a property of object "Excel.Application". So, replace the call:
workbooks := ole2.invoke_obj(application, 'workbooks');
with
workbooks := ole2.get_obj_property(application, 'workbooks');
For example:
PACKAGE BODY olewrap IS
-- Declare the OLE objects
application OLE2.OBJ_TYPE;
workbooks OLE2.OBJ_TYPE;
workbook OLE2.OBJ_TYPE;
worksheets OLE2.OBJ_TYPE;
worksheet OLE2.OBJ_TYPE;
cell OLE2.OBJ_TYPE;
args OLE2.LIST_TYPE;
procedure init is
begin
-- Start Excel and make it visible
application := OLE2.CREATE_OBJ('Excel.Application');
ole2.set_property(application,'Visible', 'True');
workbooks := OLE2.GET_OBJ_PROPERTY(application, 'Workbooks');
args:=OLE2.CREATE_ARGLIST;
OLE2.ADD_ARG(args, 'c:\test\ms\excel\test.xls');
workbook := OLE2.GET_OBJ_PROPERTY(workbooks, 'Open', args);
OLE2.DESTROY_ARGLIST(args);
worksheets := OLE2.GET_OBJ_PROPERTY(workbook, 'Worksheets');
worksheet := OLE2.GET_OBJ_PROPERTY(worksheets,'Add');
-- Return object handle to cell A1 on the new Worksheet
args:=OLE2.CREATE_ARGLIST;
OLE2.ADD_ARG(args, 1);
OLE2.ADD_ARG(args, 1);
cell:=OLE2.GET_OBJ_PROPERTY(worksheet, 'Cells', args);
OLE2.DESTROY_ARGLIST(args);
-- Set the contents of the cell to 'Hello Excel!'
OLE2.SET_PROPERTY(cell, 'Value', 'Hello Excel!');
END;
procedure addstuff is
BEGIN
-- Return object handle to cell A1 on the new Worksheet
args := OLE2.CREATE_ARGLIST;
OLE2.ADD_ARG(args, 2);
OLE2.ADD_ARG(args, 2);
cell:=OLE2.INVOKE_OBJ(worksheet, 'Cells', args);
OLE2.DESTROY_ARGLIST(args);
-- Set the contents of the cell to 'This is the added stuff'
OLE2.SET_PROPERTY(cell, 'Value', 'This is the added stuff');
END;
procedure stop is
begin
-- Release the OLE objects
args:=OLE2.CREATE_ARGLIST;
OLE2.ADD_ARG(args, 'C:\OLETEST2.XLS');
OLE2.INVOKE(worksheet, 'SaveAs', args);
OLE2.DESTROY_ARGLIST(args);
OLE2.RELEASE_OBJ(cell);
OLE2.RELEASE_OBJ(worksheet);
OLE2.RELEASE_OBJ(worksheets);
OLE2.RELEASE_OBJ(workbook);
OLE2.RELEASE_OBJ(workbooks);
OLE2.RELEASE_OBJ(application);
END;
Solution Explanation:
=====================
Microsoft changed some of the OLE calling interfaces for the
Office97
products. Thus, some of your existing OLE calls may need to be
changed to
comply with the Office97 interface.
Consult with Microsoft and your Office97 documentation or more
information
on
what the OLE interface is for the Office97 suite of products.
Additional Information:
=======================
Related Bugs:
483090 (Closed, Vendor OS Problem)
FORM GIVES FRM-40735: UNHANDLED EXCEPTION ORA-305500 AGAINST
EXCEL97.OFMPE0497
+==+
References:
ref: {8192.4} BUG-483090
Oracle Corporate Support
Problem Repository
1. Prob# 1030046.6 NEW: OLE AUTOMATION NO LONGER WORKS AFTER
UPGRADE TO OF
2. Soln# 2077481.6 NEW: MICROSOFT CHANGED OLE INTERFACE FOR
OFFICE97
1. Prob# 1030046.6 NEW: OLE AUTOMATION NO LONGER WORKS AFTER
UPGRADE TO OF
Problem ID : 1030046.6
Affected Platforms : MS Windows 95
MS Windows NT
Affected Products : SQL*Forms
Oracle Reports
Oracle Graphics
Oracle Developer/2000
Affected Components : SF40 V04.05.XX
SQLREP V02.05.XX
ORAGRAPH V02.05.XX
DEV2K Generic
Affected Oracle Vsn : Generic
Summary:
NEW: OLE AUTOMATION NO LONGER WORKS AFTER UPGRADE TO OFFICE97
+=+
Problem Description:
====================
You have upgraded to Microsoft Office97 and OLE calls in your
Developer/2000
applications no longer work.
Problem Explanation:
====================
Examples:
You are using Forms to send data to a Microsoft Word document
and print
letters, using ole automation. This worked fine with Word 6.0,
but when
they
upgraded to Word 8.0 (Office97), the letters do not get printed.
When you try to get an object handle to the Excel97 Workbooks
collection
using
the OLE2 Package, you get the following error:
FRM-40735: WHEN-BUTTON-PRESSED trigger raised unhandled exception
ORA-305500
The Same code works fine against Excel 7.0.
[ Search Words: Office 97 msoffice ms office object linking and
embedding
application get_obj_property workbook invoke_obj
appshow
upgrade upgrading bug483090 olex.rdf demo ]
+==+
Diagnostics and References:
2. Soln# 2077481.6 NEW: MICROSOFT CHANGED OLE INTERFACE FOR
OFFICE97
Solution ID : 2077481.6
For Problem : 1030046.6
Affected Platforms : MS Windows 95
MS Windows NT
Affected Products : SQL*Forms
Oracle Reports
Oracle Graphics
Oracle Developer/2000
Affected Components : SF40 V04.05.XX
SQLREP V02.05.XX
ORAGRAPH V02.05.XX
DEV2K Generic
Affected Oracle Vsn : Generic
Summary:
NEW: MICROSOFT CHANGED OLE INTERFACE FOR OFFICE97
+=+
Solution Description:
=====================
WORD:
Microsoft made some changes in the upgraded version of Word
which cause it
to
come up as a hidden application. Customer had to add "AppShow"
to his code,
and ole automation works fine now.
EXCEL:
The issue here is that Microsoft changed the object "Workbooks",
which is
now
a property of object "Excel.Application". So, replace the call:
workbooks := ole2.invoke_obj(application, 'workbooks');
with
workbooks := ole2.get_obj_property(application, 'workbooks');
For example:
PACKAGE BODY olewrap IS
-- Declare the OLE objects
application OLE2.OBJ_TYPE;
workbooks OLE2.OBJ_TYPE;
workbook OLE2.OBJ_TYPE;
worksheets OLE2.OBJ_TYPE;
worksheet OLE2.OBJ_TYPE;
cell OLE2.OBJ_TYPE;
args OLE2.LIST_TYPE;
procedure init is
begin
-- Start Excel and make it visible
application := OLE2.CREATE_OBJ('Excel.Application');
ole2.set_property(application,'Visible', 'True');
workbooks := OLE2.GET_OBJ_PROPERTY(application, 'Workbooks');
args:=OLE2.CREATE_ARGLIST;
OLE2.ADD_ARG(args, 'c:\test\ms\excel\test.xls');
workbook := OLE2.GET_OBJ_PROPERTY(workbooks, 'Open', args);
OLE2.DESTROY_ARGLIST(args);
worksheets := OLE2.GET_OBJ_PROPERTY(workbook, 'Worksheets');
worksheet := OLE2.GET_OBJ_PROPERTY(worksheets,'Add');
-- Return object handle to cell A1 on the new Worksheet
args:=OLE2.CREATE_ARGLIST;
OLE2.ADD_ARG(args, 1);
OLE2.ADD_ARG(args, 1);
cell:=OLE2.GET_OBJ_PROPERTY(worksheet, 'Cells', args);
OLE2.DESTROY_ARGLIST(args);
-- Set the contents of the cell to 'Hello Excel!'
OLE2.SET_PROPERTY(cell, 'Value', 'Hello Excel!');
END;
procedure addstuff is
BEGIN
-- Return object handle to cell A1 on the new Worksheet
args := OLE2.CREATE_ARGLIST;
OLE2.ADD_ARG(args, 2);
OLE2.ADD_ARG(args, 2);
cell:=OLE2.INVOKE_OBJ(worksheet, 'Cells', args);
OLE2.DESTROY_ARGLIST(args);
-- Set the contents of the cell to 'This is the added stuff'
OLE2.SET_PROPERTY(cell, 'Value', 'This is the added stuff');
END;
procedure stop is
begin
-- Release the OLE objects
args:=OLE2.CREATE_ARGLIST;
OLE2.ADD_ARG(args, 'C:\OLETEST2.XLS');
OLE2.INVOKE(worksheet, 'SaveAs', args);
OLE2.DESTROY_ARGLIST(args);
OLE2.RELEASE_OBJ(cell);
OLE2.RELEASE_OBJ(worksheet);
OLE2.RELEASE_OBJ(worksheets);
OLE2.RELEASE_OBJ(workbook);
OLE2.RELEASE_OBJ(workbooks);
OLE2.RELEASE_OBJ(application);
END;
Solution Explanation:
=====================
Microsoft changed some of the OLE calling interfaces for the
Office97
products. Thus, some of your existing OLE calls may need to be
changed to
comply with the Office97 interface.
Consult with Microsoft and your Office97 documentation or more
information
on
what the OLE interface is for the Office97 suite of products.
Additional Information:
=======================
Related Bugs:
483090 (Closed, Vendor OS Problem)
FORM GIVES FRM-40735: UNHANDLED EXCEPTION ORA-305500 AGAINST
EXCEL97.OFMPE0497
+==+
References:
ref: {8192.4} BUG-483090
null

Waveform chart. Send data to Excel

I am monitoring the output voltage from a electronic circuit using LabView 7.1 and a DAQ card.
I have been able to view the output voltage using a Waveform Chart but i have been unsuccessful sending the data to a file. Only one data point gets saved each time.
I am using the "Write to Spreadsheet File .vi "
Could someone tell me what i am doing wrong?
Please see the program attached below.
Attachments:
Attempt 3.vi ‏26 KB

You can build a 1D array as your loop runs. Where your data exits the while loop, right click on the border and select 'Enable Index'.
If you want to save data continously, you need to move your 'Write to spreadsheet file' vi inside your while loop. As it is, only the last data point will be saved when you stop your loop.
You will also need to connect a control or constant to the file path input so that you do not get a file dialog every time your loop iterates. Further, connect a True constant to the 'append to file?' input so that you do not overwrite data.
Also, you may want to insert a wait period in your loop to allow other processes to run.Message Edited by DavidT on 04-27-2005 09:16 AM

Need help loading data from Excel data file to oracle tables

i need to load an Excel spreadsheet to Oracle table.
The spreadsheet contains 20 columns, the first 8 columns contains basic info, but the rest 12 columns contains info like
1stQtr_08, 2ndQtr_08, 3rdQtr_08, 4thQtr_08
1stQtr_09, 2ndQtr_09, 3rdQtr_09, 4thQtr_09
1stQtr_10, 2ndQtr_10, 3rdQtr_10, 4thQtr_10
So what i need to accomplish is:
break that one record(with 20 fields) in Excel to 3 records for each fiscal year in the Oracle table, so each record in the database table will look like
8 basic field + fiscal_year + 1stQtr_08, 2ndQtr_08, 3rdQtr_08, 4thQtr_08
8 basic field + fiscal_year + 1stQtr_09, 2ndQtr_09, 3rdQtr_09, 4thQtr_09
8 basic field + fiscal_year + 1stQtr_10, 2ndQtr_10, 3rdQtr_10, 4thQtr_10
There are about 10000 rows in the data file, so how can i use sqlldr to perform such task? beside sqlldr, any other good suggestions?
thx

External Tables is just an Oracle API for sqlloader. If you going to load this data over and over again, External tables would be a good idea, but if it's a one time thing, sqlldir is simpler, unless you just want to learn how to use External Tables.
I used to run a data warehouse, so I have done, at least similar, to what you are doing in the past.

Need to send data, after Usage decision in quality inspection (QA11)

Hi all,
After Usage decision in quality inspection (QA11), i need to send some data like material number, qty etc to external database or to external party. is there anyway i can achive this in real time? real time means, it should send the appropriate data to external party after usage decision is made.
Thanks
Pabi

Hi,
You can change results recording in case the MIC in the inspection plan of the lot are marked as "long term characteristics", else it wont be possible to change result recording.
you can change the UD code only after giving the Usage decision.
you cannot change the defects recording.
Thanks
SUMIT

Sending data to excel

What is the best way to send Time vs Temp data from a thermocouple measurement to excel? I have included my set-up if that will help. Thanks in advance for your help and advice.
Kenny
Attachments:
Final-Thermocouple2.vi ‏87 KB

For information on how to write data to excel, check out the examples that ship with LV. Then get back with us if you have additional questions.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Importing data from Excel Spreadsheet into SOP

Hi,
Can anyone please tell me where I can find instructions on how to import data into SOP form an Excel spreadsheet. I know there is a used exit MCP20001 EXIT_SAPMMCP6_001 but I don't see a transaction to execute this import exit from. Please help/clarify.
Thank you
I will award points to all who respond with useful information on importing info into SOP

Dear,
Please note the info structure os not different for different versions. ALl inactive versions are also storead in the same info struture.
The info structure will be different only of the planning type is different. For standard SOP the info stucture is S076.
You could also create your own info structures for the planning types you have created using flexible planning.
For copying within the same info structures use transaction MC78. Here select the inactive version in the source and select the active version in the target. The copy with the button given for this.
Within the MC87 copying is only possible between different info structures.
Hope this helps your understanding.
Regards,
R.Brahmankar

How many RA, ID, RD needed to send date from 1 to 2 bs?

Hi PI Experts,
How many receiver agreements,interface determination, receiver determination needed to send a single file to 2 business systems.
I was able to send data to the 1st business system but unable to send data to another business system and the error is saying that cannot create receiver agreement and communication channel.
please help me out as i am new to sap pi.

How many receiver agreements,interface determination, receiver determination needed to send a single file to 2 business systems.
as per my knowledge , one receiver agreements,interface determination and receiver determination it's enough if we want to send data based on codition in receiver determination.
if u want to send same data to 2 receiver at a time.
u need to create multi mapping(1 :n)in esr and
need to create 2 interface determinations and 2 receiver agreements for 2 receiver comm.channels
I was able to send data to the 1st business system but unable to send data to another business system and the error is saying that cannot create receiver agreement and communication channel.
yes , only one agreement support to one comm.channel.

Send data to Excel

We are designing reports to run on the web using report server and PDF format. What is the best way to also move the data to Excel?

No. Oracle generates delimited output,
which Excel can read, but all field-level
formatting (font, weight, width, etc.) will
be lost. In response to a previous question,
Oracle Reports Team said that no, 9i won't
generate native Excel, either.
Since Excel was a requirement for us, we
ended up with a workaround: write a PL/SQL
stored procedure (pl/sql agent) that
generates HTML source code, with Excel
additions for font classes etc. It works
quite nicely, but obviously requires more
coding work than if Reports would do the
job. Headers and Unicode, too.
(And for some reason, Oracle's HTML output
seems to generate a random number of columns
per field, so if you take that to Excel your
data will be spread across multiple fields.
So that didn't help either.)
(Actually, if the formatting isn't critical,
the OraRepTeam answer ought to work, even
for Unicode. I've done a few small tests.
We needed the formatting, though.)
Sigh.
-- Allan Plum

Need to send data in .xls format

Hi all ,
I have to send data from internal table to .xls file . Iam just giving file extension in .xls .Iam getting file .xls format also . my requirement one field data should be in one column .is there any function module for that?

Hi,
You can use the FM GUI_DOWNLOAD to download the data from an internal table to xls file..
pass the WRITE_FIELD_SEPARATOR = 'X' to have one field in one column..
Thanks
Naren

Error while sending data thru excel addin

Hi John,
When we tried pushing the data using excel addin, it gives an error
Your software license does not include the ability to update the data thru the spread sheet.Please contact your administrator.
We are also unable to save the data thru forms.

Hi,
In 9.3.1 the products that are enabled for use are usually set by the registry.properties—in <Hyperion_Home>\common\config
Have a look at http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/hsys9_install_start_here.pdf
Page 54 - About registry.properties
Cheers
John
http://john-goodwin.blogspot.com/

URGENT: Need to send data from my Form to an excel speadsheeet and save it?

I am trying to capture some data in my form and then export it to Ms Excel and save it as an ecel file.
Somebody Pls help me .....

I am trying to capture some data in my form and then export it to Ms Excel and save it as an ecel file.
Somebody Pls help me .....
More Info: Using Forms 6i, Data from Oracle 8i

Problems with updating data in excel spreadsheet using ODI

That's my first post on this forum, therefore I'd like to say Hello to everybody reading it before I present my problem.
First I configured the ODBC connection to the xls file which conteins my data - the file isn't defined as read-only in the ODBC connection. The next step was setting up a Microsoft Excel Data Server in the topology manager in which I inserted the physical model and of course a logical one referencing the physical one. These steps allowed me to insert a model with my table in the Designer - I can view data throug the option 'view data' appearing after the right-click on the datastore. One of the columns was defined as primary key in constraints. I can use this xls file datastore as a source in an interface - loading the target finishes with a success. But I can't update the data in the xls file using the 'data' option appearing after right-click on the datastore correspondig to it in the designer. The new window with data from file appears without any problem, but when I try to update any of the fields I recieve an error:
*"See com.borland.dx.dataset.DataSetException error code: BASE+37*
*com.borland.dx.dataset.DataSetException: DataSet has no unique row identifiers.*
*Note: For QueryDataSets you need to disable metaDataUpdate.ROWID in the MetaDataUpdate property, in addition to setting the RowId property on a column.* - don't know where to configure it
at com.borland.dx.dataset.DataSetException.c(Unknown Source)
at com.borland.dx.dataset.DataSetException.kb(Unknown Source)
at com.borland.dx.dataset.StorageDataSet.fb(Unknown Source)
at com.borland.dx.dataset.StorageDataSet.a(Unknown Source)
at com.borland.dx.dataset.DataSet.startEditCheck(Unknown Source)
at com.borland.dx.dataset.DataSet.startEdit(Unknown Source)
at com.borland.dbswing.TableMaskCellEditor.textModified(TableMaskCellEditor.java:340)
at com.borland.dbswing.TableMaskCellEditor.insertUpdate(TableMaskCellEditor.java:319)
at javax.swing.text.AbstractDocument.fireInsertUpdate(Unknown Source)
at javax.swing.text.AbstractDocument.handleInsertString(Unknown Source)
at javax.swing.text.AbstractDocument.insertString(Unknown Source)
at javax.swing.text.PlainDocument.insertString(Unknown Source)
at com.borland.dbswing.DBPlainDocument.insertString(DBPlainDocument.java:77)
at javax.swing.text.AbstractDocument.replace(Unknown Source)
at javax.swing.text.JTextComponent.replaceSelection(Unknown Source)
at javax.swing.text.DefaultEditorKit$DefaultKeyTypedAction.actionPerformed(Unknown Source)
at javax.swing.SwingUtilities.notifyAction(Unknown Source)
at javax.swing.JComponent.processKeyBinding(Unknown Source)
at javax.swing.JComponent.processKeyBindings(Unknown Source)
at javax.swing.JComponent.processKeyEvent(Unknown Source)
at com.borland.dbswing.TableMaskCellEditor.processKeyEvent(TableMaskCellEditor.java:627)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.KeyboardFocusManager.redispatchEvent(Unknown Source)
at java.awt.DefaultKeyboardFocusManager.dispatchKeyEvent(Unknown Source)
at java.awt.DefaultKeyboardFocusManager.preDispatchKeyEvent(Unknown Source)
at java.awt.DefaultKeyboardFocusManager.typeAheadAssertions(Unknown Source)
at java.awt.DefaultKeyboardFocusManager.dispatchEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)"
What should I do to be able to modify data from the xls file that way (is it possible in any way)?

It is not possible to update the data directly from ODI on some technologies, mainly due to some driver limitations.
I would suggest to edit the spreadsheet in Excel.
Thanks,
Julien

Need to send data as files from SAP to other systems.

I need some code which will be useful to me. I fetched data from sap to internal tables. Now, the data needs to be sent to other systems (Informatica or so..) as files. Pl. anyone send me a sample code which i can use in my program.
I will try to reward points to people who will be able to help me.

Hi, Pl. find the required code which might be useful for ur question.
Get the data for Userid(l_user) & password(l_pwd) & host string(l_host).
DATA: l_slen     TYPE i,
      l_error,
      l_pwd(30) TYPE c.
CONSTANTS: c_dest TYPE rfcdes-rfcdest VALUE 'SAPFTP',
           c_key TYPE i              VALUE 26101957.
connect to ftp server
l_slen = STRLEN( l_pwd ).
CALL FUNCTION 'HTTP_SCRAMBLE'
    EXPORTING
      SOURCE      = l_pwd
      sourcelen   = l_slen
      key         = c_key
    IMPORTING
      destination = l_pwd.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
    EXPORTING
      text = 'Connect to FTP Server'.
To Connect to the Server using FTP
CALL FUNCTION 'FTP_CONNECT'
    EXPORTING
      user            = l_user
      password        = l_pwd
      host            = l_host
      rfc_destination = c_dest
    IMPORTING
      handle          = w_hdl
    EXCEPTIONS
      OTHERS          = 1.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
               WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Get the path to which the data file needs to be moved (w_outfile).
PERFORM download_to_ftp TABLES it_coacode USING w_outfile.
FORM download_to_ftp TABLES it_tab
                     USING l_string TYPE char64.
CALL FUNCTION 'FTP_R3_TO_SERVER'
    EXPORTING
      handle         = w_hdl
      fname          = l_string
      character_mode = 'X'
    TABLES
      text           = it_tab[]
    EXCEPTIONS
      tcpip_error    = 1
      command_error = 2
      data_error     = 3
      OTHERS         = 4.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
            RAISING invalid_output_file.
ENDIF.
ENDFORM.                    " download_to_ftp
Pl. award points if it has solved ur problem.

Need to send data to excel spreadsheet

Similar Messages

Maybe you are looking for