Need to send mail from Microsoft Exchange 2007 account(different from Gmail) on behalf of another Gmail ID. How to configure that ?

I have a Gmail ID (e.g [email protected])
I have a Exchange ID (e.g  [email protected])
I need to configure exchange account (2007)  such that I can send a mail from my Exchange account but at the receiver end it looks like it was sent from  ([email protected]).
Both the accounts are my accounts.
I need this because I do not have access to my Gmail account from place where I access the internet and I need to send the mails from my Gmail account only.

So you want to spoof your e-mail address.
You can make your Exchange server send as any address you want.  Just create a different mailbox with that address as the primary (reply) address.  It has to be a different account.
However, be aware that many systems to which you send such mail to will bounce it as suspected spam because they'll detect that your server is sending mail from Gmail but your server is not Gmail.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Similar Messages

  • IPad unread email count doesn't tally with Microsoft Exchange 2007 email count from OWA.

    I discovered that when we first setup the iPad to sync email from Microsoft Exchange 2007 server via ActiveSync, the total number of unread email count tally with the count from OWA. After a few days, the unread email count will be out of sync. The settings for iPad "Mail days to syn": No limit. Mail to show: 1000. iPad iOS: 5.1.1
    We performed the following:
    1.     Compare email by email to verify which are the read email from OWA doesn't sync to iPad. We discovered that some emails read from OWA doesn't sync with iPad even performed forced update. However, if we delete that read email from OWA, it will delete (unread) from iPad immediately after sync.
    2.     Email recall message for successful recalled displayed in OWA but not on iPad.
    3.     Calendar invite message forward as email displayed in OWA but not in iPad.
    Is there a bug for Microsoft Exchange 2007 or there is limitation for iPad?
    Any kind expert can advice?
    Thanks.

    Can you do setup an unread mail folder that shows all unread mail regardless of what folder it really is in on the iPhone mail program somehow?
    No.
    If not, can this be submitted as an enhancement as it makes email use very cumbersome.
    Yes. You can submit feedback to Apple: http://www.apple.com/feedback/iphone.html.

  • Send mail to Microsoft Exchange

    Hi!
    i need know, how conect to Microsoft Exchange Server to send and recive email's.
    thankyou

    hi
    it is simple...
    you can use java mail package
    use pop3 for reading
    and smtp for sending...
    best of luck
    regardss
    [email protected]

  • Why do i send mails on one of my accounts but the reply comes back to another account all in mail

    when ever i send a mail from my buisness mail account and i get a reply, the message comes back to my personal account even though it doesnt show on the recipients mail. but when they click to reply it is sent back to my other account. there must be somewhere in the settings but i cant find it. can anybody shed light on this????

    Have you run Connection Doctor? Click on Window in the menubar, choose Connection Doctor. If that indicates it connect to your ISP provided SMTP, and without Login, then it means that the Authentication of the SMTP should be set to None, and no Username and Password needed. Many times with cable ISPs, the SMTP is actually authenticated based upon the IP address of the modem there provide you, and attempting to use Password authentication will result in failure. Mail is different in this regard as it will not negotiate this, but requires your attention to it.
    If Connection Doctor cannot connect, then more info is needed.
    Ernie

  • Accesssing Mailboxes,Mail Information from Microsoft Exchange

    Hi,
    I want to know how we can access the mailbox information and information of a particular mail like messagebody,headers from Microsoft Exchange using JNDI. Any body who knows let me know whether it is possible and if yes how to achieve this.
    I already can able to get user information and exchange configuration.
    Waiting for a quick reply.
    Thanks.

    I want to assume you are talking about reading a Mailbox information(Attributes) from Microsoft Exchange using JNDI.
    If this is what you mean, I say it is very possible.
    The JNDI Tutorial will help you out. These are the step u will need to take.
    1. Define a collection item you will use to hold your exchange server information and provider information. The Hashtable component is mostly used.
    2. Create an intance of your Exchange Server context.
    3. You can then do a search for the mailbox recipient in the context server.
    4. you can then begin read the mailbox attribute from the Attibute object you had search for in step 3 above.
    You should please use look thru the JNDI Tutorial topic Naming and Directory.

  • NEED TO SEND MAIL FROM FORMS...

    DEAR ALL,
    I NEED TO SEND MAIL FROM FORMS WHEN I PRESS THE MAIL BUTTON.
    I HAVE NO IDEA FOR THIS CRITERIA. IF ANY ONE EXPERIENCED WITH
    THIS CRITERIA, PLS HELP ME AND GIVE ME THE CODING FOR THAT.
    AND ALSO PLS EXPLAIN EACH LINE OF CODING, WHICH U POST.
    THANKS IN ADVANCE
    S.BERNANDAS

    Your requirement can be done in forms. Good amounts of advice here. There 244 messages this year alone that fit the search criteria in the Oracle Forms forum.

  • Need to Send Mail from JSP...

    Dear Team,
    I Need to Send Mail from JSP, have Designed user Interface to enter
    to, from, subject, and message text .
    Have Downloaded mail.jar and activate.jar file..... and placed in tomcat lib directory and WEBAPPS/WEB-INF/lib Directory too
    How do i send a mail to user ?
    do I require something else apart from things that i have mentioned?
    do i have to Configure SMTP, POP3 or Something like this....
    Now If I Create a object of Type MimeMessage and Set Recipient, from, subject and if i say transport.send(message) will this do My JOB???

    Dear Team,
    I Need to Send Mail from JSP, have Designed user
    Interface to enter
    to, from, subject, and message text .
    Have Downloaded mail.jar and activate.jar file.....
    and placed in tomcat lib directory and
    d WEBAPPS/WEB-INF/lib Directory too
    How do i send a mail to user ?
    do I require something else apart from things that i
    have mentioned?
    do i have to Configure SMTP, POP3 or Something like
    this....
    Now If I Create a object of Type MimeMessage and Set
    Recipient, from, subject and if i say
    transport.send(message) will this do My JOB???Yup! in addition to all the above i need to know my mail box outgoing mail server. and that's enough...... i am able to do that.
    Regards,
    Jagadeesh HS.

  • Readinjg mail from Microsoft Exchange Server

    Hi,
    I neeed java code to read emails from Microsoft Exchange Server.Can somone please share the code.
    Thanks in Advance
    Rama

    Thank you very much for the reply.
    I tried to write the code .At one place I am getting the below error.
    DEBUG POP3: server doesn't support TOP, disabling it
    Exception in thread "main" java.lang.NoClassDefFoundError: javax/activation/DataSource
         at com.sun.mail.pop3.POP3Folder.createMessage(POP3Folder.java:333)
         at com.sun.mail.pop3.POP3Folder.getMessage(POP3Folder.java:314)
         at javax.mail.Folder.getUnreadMessageCount(Folder.java:761)
         at InboxReaderIMAPLast10.main(InboxReaderIMAPLast10.java:41)
    Pls help me in fiding the reason
    Rama

  • TS3899 Sending a meeting invite from Exchange 2007 account located in Central Time from Outlook 2010 Email Client located in Eastern Time cause meeting to show up 1 hour early on iPhone

    Sending a meeting invite from Exchange 2007 account located in Central Time from Outlook 2010 Email Client located in Eastern Time cause meeting to show up 1 hour early on iPhone.

    The meeting invite is being sent from a Computer through the Outlook 2010 Email Client. Both Computer and Outlook 2010 are set to Eastern Time. The OWA (Outlook Web Access) for the 2007 account is set to Eastern Time. The Outlook 2010 Email Client is connected to an Exchange 2007 account and the Exchange server for the exchange 2007 account is located in Chicago (Central Time) and is set to Central Time. When the meeting invite is sent from the Outlook 2010 Client the recipient receives the invite on his/her iPhone(set and located in the Eastern Time Zone) and a mime-attachment.ics file is attached to the meeting invite email. There is no info displayed in the subject line or message body. If the iPhone user opens the attachment it displays the meeting date and time and any other info that was sent from Outlook. The Outlook 2010 user sets the meeting for 10:00am to 11:00am. when the meeting invite mime-attachment.ics file is opened on the iPhone the meeting is displayed as 9:00am to 10:00am. if the iPhone user adds the ics file to his/her calendar it adds a meeting event that is scheduled 1 hour earlier than it is supposed to be. I had the iPhone user to set Time Zone support on and off and there is no change.

  • How to change POP mail to IMAP and what's with Microsoft Exchange 2007?

    When I set up two of my email accounts I had Leopard. And I set the email accounts up as POP mail accounts. But now I want to change them to IMAP accounts because my school recommends the school email as being IMAP and I would like to change my main email to IMAP. My more recent email set up as IMAP.
    But every time I try to make a new email it tries to set up as Microsoft Exchange 2007 and I don't even know what that is. I would rather have it as IMAP because that's what I've been told to use. I have never been good at setting up email.
    So may someone please help me.
    I would just like to change these accounts that are set up as POP mail into IMAP.

    Instructions can be found in this thread - http://discussions.info.apple.com/message.jspa?messageID=12223866 or http://207.46.16.237/en-us/140/cc511390.aspx which I found through Google search.
    every time I try to make a new email it tries to set up as Microsoft Exchange 2007 and I don't even know what that is.
    Microsoft Exchange

  • Outlook 2011 for Mac with Microsoft Exchange 2007/2010

    Hi,
    For already a fews days I am troubleshooting a Mac Outlook 2011 <> Exchange sync issue. I've got exact the same symptoms in two totally different environments. 
    - Environment one:
    Exchange 2007 SP3 RU 14 (8.3.379.2)
    Outlook 2011 14.4.7
    - Environment two:
    Exchange 2010 SP1 RU 8 (14.1.438.0)
    Outlook 2011 14.4.7
    Problem:
    Autodiscover and EWS synchronisation test from Microsoft Exchange Connectivity Analyzer is succesfull. Configuring an new (Exchange) e-mail account with Outlook2007/2010/2013 fully based on autodiscover works with no errors. 
    Configure Outlook 2011 based on autodiscover when connected to the internal LAN works. Configure Outlook 2011 based on autodiscover or by hand doesn't work from WAN. 
    I am unable to synchronize Outlook 2011 with Exchange when WAN connected (No error in logging). I am able to synchronize OS X Mail (Default OSX Mail client) with the same Exchange server.
    Conclusion: the autodiscover function that Outlook 2011 uses does not work from WAN, the autodiscover function that Outlook 2007/2010/2013 and Exchange Connectivity Analyzer is using does work from WAN. Do I need to configure something special for synchronization
    with Outlook 2011 other than explained above when working from WAN?
    When testing EWS with 3th party tooling(EWS Editor) and Exchange Connectivity Analyzer everything is working as it should be. (all mailbox data is shown). If you need any more information about the context I am happy to provide.
    Regards,
    Mikkie van Falier

    Hey hpujary.
    Welcome to the BlackBerry Support Community Forums.
    At this time, only contacts can be synchronized with BlackBerry Link software and a BlackBerry 10 Smartphones. The functionality to provide more options for PIM synchronization may be added in the future. I cannot say for certain that the issue outlined in KB27248 is resolved for BlackBerry 10 Smartphones as the functionality does not exist to confirm.
    Cheers.
    -Sawks
    Come follow your BlackBerry Technical Team on Twitter !@BlackBerryHelp
    Be sure to click Like! for those who have helped you.
    Click Accept as Solution for posts that have solved your issue(s)

  • Cannot Connect to Microsoft Exchange 2007

    Hello everyone,
    I'm sure this question has been answered somewhere on here already but I can't seem to find it.  I am trying to connect to my school employee e-mail which is on Microsoft Exchange 2007.  In the mail setup wizard I have Exchange 2007 selected as account type, for my incoming server name I put owa.school.edu, my username and password and it will not connect, giving me the following error message:
         The Exchange 2007 server "owa.school.edu" is not responding. Try checking the network connection, and that the server name is correct. Otherwise the      server might be temporarily unavailable. If you continue, you might not be able to receive messages.
    Now I've used this same information on my iPhone and iPad and haven't had a problem synching with those decices.  Why will this not work with the mail app on my MacBook? It may also be helpful to note I am running version 10.6.8 of Mac OS X.

    What is really weird from Apple is that the Iphone is connecting to exchange without wondering wether it's an exchange 2003 or 2007, but Mail does....
    I connected my Iphone in a matter of minutes, but I just realized that it is a 2003 exchange server that I'm connected with.
    So I asked my Admin wether I can connect thru IMAP.
    Gilles

  • Treo 680 does not sync with Microsoft Exchange 2007

    Hi
    My company just  upgraded to Microsoft Exchange 2007 and my teo 680 stopped syncing my mails. I checked with the plam support and they informed me that 'The Treo 680 unlocked device is not supported with the Exchange Server 2007.' 
    Has anyone faced this problem. Can anyone help?
    Thanks in advance. 
    Post relates to:
    This question was solved.
    View Solution.

    bonzi wrote:
    i have tried this out. while this may work on Sprint, it does not work on Unlocked devices. Finally with no solution from Palm on this particular issue i had to switch to a windows based mobile. I am a Palm fan, but looks like Palm does not care about this.
    Nothing to do with Sprint: using domain\username in place of the username in VersaMail has been confirmed on the Centro on the AT&T network. I think the Centro runs a newer version of VersaMail than the 680 (the 680 was released in the Fall of 2006). Perhaps that is the difference?
    The last software update was in January 2008, to support direct push email (http://kb.palm.com/wps/portal/kb/na/treo/680/unlocked/solutions/article/10807_en.html). I doubt you will see more, considering that this device has been discontinued.
    I'm running Windows Mobile now. I miss the PalmOS calendar, but I don't miss VersaMail.

  • Need to send mail using apex

    Hi,
    I am using apex 4.2 and oracle 11g XE. I need to send mail so I used the following code:
    HTMLDB_MAIL.SEND(
          P_TO       =>  '[email protected]',
          P_FROM     =>   [email protected]
          P_SUBJ     =>  'Data in TECHNICAL_DETAIL edited' ,
          P_BODY     =>  'Please click link below for affirmation/rejection of changes' ,
          P_BODY_HTML=>   '<p><a href="http://localhost:8080/apex/f?p=109:25:12079147455079">link</a></p>'
    It is going t apex_mail_queue successfully. Then I used the following code:
    which one i should use:
    1.
         wwv_flow_mail.push_queue(
            P_SMTP_HOSTNAME => xxx
            P_SMTP_PORTNO => 'yyy
    or
    2.
         APEX_MAIL.PUSH_QUEUE(
            P_SMTP_HOSTNAME => xxx
            P_SMTP_PORTNO => yyy
    Also what else I need to send mail and what should i  ask DBA to provide me so that mail can be sent successfully.
    Please give some idea.
    Thanks,
    Chandra Bhanu

    Hi,
    You should use APEX_MAIL.PUSH_QUEUE witch is documented
    APEX_MAIL
    Parameters
    Description
    p_smtp_hostname
    SMTP gateway host name
    p_smtp_portno
    SMTP gateway port number
    Note that these parameter values are provided for backward compatibility, but their respective values are ignored. The SMTP gateway hostname and SMTP gateway port number are exclusively derived from values entered on the Manage Environment Settings when sending email.
    Regards,
    Jari

  • Has anyone managed to create an email account on the OS X mail client with Exchange 2007?

    Hi guys,
    the IT chaps of my new employer tell me that it is impossible to use the OS X mail client with Exchange 2007 servers. Is that correct? If so, does anyone know a workaround?
    Thanks
    Juergen

    jthurner wrote:
    Hi guys,
    the IT chaps of my new employer tell me that it is impossible to use the OS X mail client with Exchange 2007 servers. Is that correct? If so, does anyone know a workaround?
    Thanks
    Juergen
    No workaround needed, open Mail, Contacts and Calendars (in System Preferences) select Exchange, enter your email address and password, opt to setup Contacts and Calendars as well as mail and hit enter. That should set it up (assuming your apparently witless IT dept has setup the autodiscover record correctly at their end)

Maybe you are looking for

  • TS2755 My iMessage won't activate.

    I have great cellular data, but my iPhone has been saying "waiting for activation..." for about three weeks under my iMessage on and off switch. I have an iPhone 4. I've tried restarting my phone and I just updated it to the 5.1.1 software, but nothi

  • How to create & use WEB services in WD4A?

    HI SDN, How can we create & use WEB services in WD4A? Can any one send me the link for it? Thanks in advance, Rahul

  • Firefox won't let me access a website. How do I change that?

    I can access the website itself, bu t where there should be 2 blanks to enter my ID and PW, there is just a large Firefox window saying Firefox says this is an untrusted site!! How do I change that and allow myself access to this site? Thank you for

  • Ally & Email (again!)

    Yesterday morning, my email stopped working.  At first it was my exchange email (which just disappeared), and then my POP3 email kept doing a "force close" routine.  I called the tech support people at Verizon, and then directed me to do a factory re

  • Adding multiple pdf sheets with tabs

    Hello, I am working on our new product line and i have had some good help here. The last thing im working on is the quotation sheets. For each product we have a seperate quotation sheet in excel. We convert them to PDF and send them to the customer.