Need to split 2up a document
I have a pdf that needs tyo be 2upped, so that we can:
duplex the document
cut the page in half,
place the left stack on top of the right
and everything is in order.
So if my original pdf looks like this:
Letter1, page1
Letter1, page2
Letter2, page1
Letter2, page2
(at the half way point in the original file)
LetterX, page1
LetterX, page2
LetterY, page1
LetterY, page2
Then the resulting 2 up pdf will look like this:
Letter1, page1 LetterX, page1
LetterX, page2 Letter1, page2
Letter2, page1 LetterY, page1
LetterY, page2 Letter2, page2
Does anyone know of any software programs that can do this? (We have the full Creative Suite3, so a plugin for Acrobat Pro or Indesign is perfectly acceptable, as long as it works. We're dealing with personalized letters here, so we can't have any mistakes.) Assume that the leeters will always be the same length and the number of pages will always be evenly divisible by 4 (so the bottom page of the stack is printed front and back).
Thank you for any suggestions!
KaleeyJ
We are going to be using this for both 8.5X14 and 8.5X11 2upping (on 17X14 paper and 17X11 paper, respectively).
Sounds like cut stacks. Try our Quite Imposing or Quite Imposing Plus products.
Here is a demo number good till the end of November. Again, try the demo for free to make sure it works out.
Quite Imposing Plus V1/V2
Expires end 11/2009 Serial 3410-8227-6240-8766 Code 6559
Also,once loaded Check out Getting Started tech sheet. Go to our Imposition Control Panel and click on the ? button.....then click the Getting Started button. Lots of good information on signature setups Step-by-step Instructions and New features (and info on cut stacks).
Take a look at www.quite.com/imposing/techsheet too-it has more tech sheets.
cheers,
Charles
Charles James
Technical/Marketing Director
Quite Software
USA
858.581.9143
[email protected]
[email protected]
www.quite.com
Similar Messages
-
Need to split the document in 950 line iteam record in LSMW
HI ALL,
I am posting documents using LSMW for Tcode FB01. But some documents having more no of line items like 1000.
But SAP will allow only 950 line tems for each documents. In this sistuvation we need to split the data as 950 and 50. we need to post 2 different documents with same header data.
<removed by moderator>.
regards,
srikanth
Moderator message: please do not ask for documents being sent to you directly.
Edited by: Thomas Zloch on Nov 15, 2010 2:18 PMThere are a couple of things you can do:
instead of posting the individual line itame detail, post summary items.
Create a dummy offset account. Total the first 950 items and post the remainder to the offset. Then do the same for the remaining items. The total to the offset will be zero.
If you search the forum, you will find more details on this.
Rob -
Need to convert pictures and documents to PDF
need to convert pictures and documents to PDF
Hi BodyWhys,
Please do below if you are using Adobe Reader:
1. Launch Reader
2. Select "Tool" at right pane
3. Sign in with your Adobe ID and password after clicking "Sign in" under "Tools"
4. Select "Create PDF" tab
5. Click "Select File" button
6. Select your picture or document (please see more information on supported file at http://helpx.adobe.com/acrobat-com/kb/using-createpdf.html#main_Convert_a_file_to_PDF)
7. Click "Convert" button
8. Click "View PDF File in Reader" after converting the file
Please do below if you are using online service
1. Login to https://createpdf.acrobat.com/signin.html with your Adobe ID and password
2. Select "Convert to PDF"
3. Click "Select Files" button
4. Click "Download" button in progress bar after convert is complete.
Please let me know if you have more quetions.
thank you.
hisami -
I need to make a pdf document, already made in photoshop, 'page turn' and then add it to my website as an e-brochure. I know I can do this in indesign but indesign will not open pdf files for some inexplicable reason. Any ideas how I can do it without completely starting again?
Hello waitingone,
please try this (all terms are translated from my German programs to my best knowledge):
1. Did the creator of the pdf file enable the import options?
2. See import options: choose an other visibility option for your layer.
3. Let you show the import options and click into one with a black background and try these out (often a gray is selected).
4. See trimming: try the different modes there. Often works: "Media".
5. Is the pdf file (eg from Word) correctly created?
6. Is the PDF file protected? >>> no import possible.
7. If that does not help, store the pdf file in Acrobat, repair possible errors, run the PDF Optimizer before placing in InDesign.
Good luck!
Hans-Günter -
When I open up a PDF Document all i get is an error message saying: "There was an error opening this document. The network path was not found" I dont know how to fix this, so looking for some advice please, as I really need o open up my documents.
Thank for any help.The documents I’m trying to read are already saved on my computer, under various different headings, I know that we have a server, so I only assume these documents are saved on here, as I said before I’m not good with all this techno stuff. I do my work each week ( on a payroll system) and save the documents for each company, they automatically go to the correct place. I never request for them to be saved in a certain place ( well not that I’m aware of) . I then on occasions need to open up this information, it is then that I can’t read or open the documents. We do have a tech help, but they are off sick until the 5th Jan, hence me trying to work out if I can fix this problem through this help site. Its ADOBE Reader that I’m trying to use.
-
Please, help... I need to convert an Illustrator document into .pdf
Does anybody can help me? I have a document in Adobe Illustrator Artwork 12.0 but don't have the program to open it (and don't know which one I need)
If I send the document, could you please convert it into .pdf or word. It's a letterhead for the church I work at.
Thank you very much.E-mail the Illustrator document to me at the following address:
harron {at mark} kurakichi {dot} com
If you can, put the .ai document in a .zip archive before e-mailing. -
To split the payment document value as per the line items of the P O
To split the payment document value as per the line items of the purchase order in the period of payment, so that the payment amounts are measured against the Capex order assigned as account assignment in the purchase order.(Account assignment tab for the individual line item in the PO.
Example:
Inputs:
Purchase Order 3100012345, line item 10 value 6000 line item 20 value 4000
VAT @10% , account assignment for PO line item 10(Internal Order no 10001) & line item 20 Internal Order 10002) G/ R no 5105105101 for Rs10,000.
The I/R doc 501501501 appears as follows: (MIRO)
Line 10: Value Rs 6,000
20: Value Rs 4,000
VAT Rs 600
Rs 400
Total Rs11, 000
Withholding Tax Rs 1,100
The accounting entry for MIRO happens as follows: doc 2102102101
GR/IR Dr Rs 10,000
VAT Dr Rs 1.000
Vendor Cr Rs9, 900
TDS due Cr Rs1, 100
The business expects the payment report as follows:payment doc 2001200101
PO Line item Internal Order MIRO Invoice Payment Payment period Amount
A/c doc number doc number
3400012345 10 10001 5605605601 2102102101 2001200101 001/2009 5940
3400012345 20 10002 5605605601 2102102101 2001200101 001/2009 3960
Currently we are able to show the amounts as Rs 6000 for line item 10 & Rs 4000 for line item 20.
The problems faced.
1. The VAT line items are auto created, hence the reference of purchase order number and line item are not available. So the VAT portion which is part of payment liability does not get reflected against the PO.(not able to show the VAT portion , when we try to show the payment amount per PO line item.)
2. The withholding tax is also a problem; WHT is not calculated and assigned per line item. It is calculated on the total amount of basic and VAT. Because of these reasons, the payment could not be shown properly according to the line item of the purchase order.
3. When part payment is made, against invoices, there is no provision to assign a payment amount against a particular line item. Further, when final payment is made in different period, the clearing document will get generated. That adds to the complexity of differentiating full payments and part payments final clearing.
4. When residual payment is made, a new line item is created. Here assignment of Purchase order line item against payment for residual items become a problem.
5. Many a times advance payments are made. Later the invoice is created and balance payment is made. In those situations, the clearing document creates one more line item and makes payment for the balance item. This adds complexity in bringing balance payment alone and to split as per the purchase order line item. The clearing document number system is multi dimensional. It creates two line items for the same item (one at the time of advance and another the time of clearing.)
6. When full payment is made, the payment document number and clearing document numbers are same. In cases of subsequent or partial or residual payment, the document numbers are different. Because of this, the part payment amounts are shown in the period, where the final payment and clearing are made.
Please suggest a way to split the payment amount in the exact posting period with all the considerations given above.
Regards
Sundararajan
Edited by: Sundarajan Venkatachari on Sep 30, 2009 11:04 AMHi,
See Note 301077 - User exits for the interface to accounting, although I think that there isn't this kind of option. Note 429117 - Collective note advice note SD-FI interface will be useful too.
I think that SAP Note 1085921 - Document split perhaps will help you
Regards
Eduardo -
Help needed in splitting files using BPM
Hello experts,
I am working on an interface where i need to split files within BPM.
I know,i can achieve it in Message Mapping by mapping Recordset to Target structure and then using Interface Mapping within Transformation step.But i dont want to follow this.Is there an alternative way to achieve this within BPM.
I have an input file with multiple headers and i need to split for each header.My input file looks like this:
HXXXXXABCDVN01
MXXXXXXXXXXXXXX
MXXXXXXXXXXXXXX
SXXXXXXXXXXXXXX
HXXXXXABCDVN02
MXXXXXXXXXXXXXX
MXXXXXXXXXXXXXX
SXXXXXXXXXXXXXX
HXXXXXABCDVN03
MXXXXXXXXXXXXXX
SXXXXXXXXXXXXXX
Is there a way, where i can specify this condition within BPM , that split files for every H.
Thanks in advance.
Regards,
SwathiHi,
have your target structure with occurence as 0...unbounded in the mapping and map the header filed to the root node (repeating parent node) of the target structure....this will create as many target messages as the header fileds....if you want to send these messages separately then use a block in BPM with ForEach option....
Splitting and Dynamic configuration can be applied in the same mapping.
Regards,
Abhishek.
Edited by: abhishek salvi on Dec 18, 2008 12:59 PM -
I need to turn an indesign document into an editable pdf. how do I do that?
I need to turn an indesign document into an editable pdf, how do I do that?
InCopy is a solution, but it's not the only viable solution.
I update many books, from 200 pages to 3,200 pages every year, long document, very techincal tax books.
Some are done through InCopy, some are edited word files and rtfs exported from InDesign, some are marked up hard copies etc.
It totally depends on the clients technical ability with computers. Last year I taught over 30 authors of ours how to use InCopy. Some were receptive, some were dubious, some were totally clueless.
And on the dubious and totally clueless I spent more time troubleshooting their problems than I would normally with a Word/RTF option.
Some people are capable of switching to InCopy or even know how to use it in the first place. For anyone never used InDesign or InCopy before then it's a massive learning curve to jump from MS Word et al word processors, to InCopy.
I do agree, it is the best solution that's out there, technically. But that solution is not usable by a lot of people.
Yeh if the client is comfortable with InCopy then it's the way forward.
But in most cases, in my experience, it's faster and more efficient to Export the text as RTF and let the author update the RTF. That leaves you in control of reinserting the text and formatting it correctly. Rather than letting the client add bold, underline, italics, superscript, subscripts, crazy workarounds because they didn't know how to do it properly. And in the end you end up with 2 or 3 times the amount of work than is necessary, just cleaning up what the client has done in InCopy that does not suit the overall formatting of the publications. -
Using the content aware move tool, I want to move an item from one image to another image but it does not seem to work. I think I need two layers on one document so how do I do this
Good day!
A simple Paste does not work for you?
It should place the clipboard content as a new Layer which you can then move around.
If there is any chance that the elements need to be scaled, rotated etc. I would prefer to place them as Smart Objects (File > Place …) and do the masking that is specific to the images themselves in those.
Regards,
Pfaffenbichler -
mule13470
Apr 3, 2014 11:12 AM
I tried simply renaming them however it just corrupts the files when I do it like that so I need the applescript to open the files in excel and the save them as .xlsx to test I only need it one folder but if it works I'd like to be able to do it for all documents with .xlsb extentions that are in a huge folder with subfolders that contain a mix of .pdf, .docx, .xlsx and .xlsb. Please Help.
Applescript Editor, Mac OS X (10.6.8)
I have this question too (0)
Reply
Categories: Using OS X MavericksTags: mac, help, finder, excel, applescript_editor
Level 1 (0 points)
mule13470
Re: I need an applescript that opens documents in excel from a specified folder and saves them as .xlsx from their current .xlsbApr 3, 2014 11:19 AM (in response to mule13470)
In that huge folder I only need the .xlsb files opened and saved to .xlsx not the others, in case that wasn't clear above.In that huge folder I only need the .xlsb files opened and saved to .xlsx not the others, in case that wasn't clear above.
-
I need to change a PDF document
how do I change a PDF Document?
Hi Graffiti
I just signed up adobe Export PDF paid 23.88 per year,. to be able to
change a PDF document. I don’t see where the icon or how to start to use
PDF to change a document sent to me. Please help.
Thank you,
Terry
From: ~graffiti
Sent: Friday, April 03, 2015 2:48 PM
To: Allan Sockol
Subject: I need to change a PDF document
I need to change a PDF document
created by ~graffiti <https://forums.adobe.com/people/%7Egraffiti> in *Adobe
Reader* - View the full discussion
<https://forums.adobe.com/message/7402911#7402911> -
Need to split Quicktime movie files
Hi Group!
I have a bunch of movie files (MPEG4) that I need to split.
I'm thinking a workflow like this:
- open movie in qt pro
- create out-point at the 65 minute mark
- cut it
- create new movie
- paste it
- rename it to oldname_"Part1"
- save it
- close it without saving
- rename remaining file to oldname_"Part2"
- save it
- close it without saving
So far I have the split/cut/paste part working, but I can't figure
out how to name a open movie file in Quicktime.
(I'm new to all this, as you can tell, and the Library in the Script Editor
for the Quicktime components did not really explain a lot to me).
Any help appreciated!
Thanks!Try something like this…
click here to open this script in your editor<pre style="font-family: 'Monaco', 'Courier New', Courier, monospace; overflow:auto; color: #222; background: #DDD; padding: 0.2em; font-size: 10px; width:400px">set save_folder to path to movies folder as Unicode text
tell application "QuickTime Player"
set my_movie to the front movie
set my_file to save_folder & my suffixwith_extension(mymovie's name, "_Part2")
save my_movie in my_file -- use for a reference to the original
-- save self contained my_movie in my_file -- use for a portable file
end tell
to suffixwith_extension(filename, suffix)
if file_name contains "." then
tell (a reference to AppleScript's text item delimiters)
set {tid, contents} to {contents, "."}
set file_name to file_name's text items
tell (a reference to file_name's item -2) to set contents to contents & suffix
set {file_name, contents} to {file_name as Unicode text, tid}
end tell
else
set file_name to file_name & suffix
end if
return file_name
end suffixwithextension</pre> -
Need a output based on document no and company code
Hello All,
I am new to BI and appreciate your cooperation
I have a requirement where in I need a total count based on Document no and company code in the Report where in a document no can exist in multiple company code
Say for eg
Doc No CompanyCode
123456 1000
123456 2000
222222 2000
333333 2000
Now I need the count based on document no and company code in the report. Kindly advice
Thank you
PoonamHi Poonam,
I don't know if this is possible in Query Designer level..
Here is my suggestion:
1. Create a new infoobject that will be used for the combined Doc No and Comp Code
2. In transformation level, create a field routine that will CONCATENATE the Doc No and Comp Code in the infoobject you have created in STEP 1
3. In Query Designer, make a FORMULA VARIABLE and choose REPLACEMENT PATH (select the infoobject you have created in STEP 1)
4. In replacement path tab, choose INFOOBJECT, then ATTRIBUTE, and select CONSTANT 1 (forgot the exact name but there is constant 1 something in the selection)
5. Create a global CKF with this formula (FORMULA VARIABLE * 1), this is necessary because sometimes the FV doesn't work without doing this
6. Use the global CKF in your keyfigure structure, it will show the number of UNIQUE combination of Doc No and Comp Code
Regards,
Loed -
MRP, need to split total order in three week
Hi SAP GURU,
i need to split total order in three weeks. how i can make setting so that after MRP execution system will create proposals like 1st week302nd week 303rd week 40
Thanks,
SAP PQDear
Goto MD61-Enter Material -Goto User Parameters -Select Weekly (W) -Enter Weekly bucket qty in case u have PIR as your demand
In case if you have Sales Order oriented qty then you can use Scheduling agreement kind of forecasting in VA31 instea of MD61 or Yo can try Period Lot Size WB in Material master and logging Sales Order qty .
Check both cases in sandbox and look at MD04 result
regards
JH
Maybe you are looking for
-
What is a claim form, says 150 operator
I have recently been in touch with your customer care operatives, who have, on May 8th 2013 and June 13th, told me that they have sent me a claim form to enable me to claim compensation from you for services NOT provided. I also contacted your custom
-
Final Cut Pro System support folder missing
I downloaded a cool plug in for a aged film look but I cannot find the "Final Cut Pro System support folder" in which i have to place this plug-in. Any Ideas?
-
It is always the active window/tab that pops out. I usually have 6-10 tabs running for the usual tasks I need to complete daily. My hand is always on my mouse when the tab pops out, hovering over the content part of the page (this is a PC) but I am n
-
Inter Company Clearing account OBYA
What happens to the open items created in the inter company clearing accounts created in OBYA? i.e I have made a posting of a rent paid by company A on behalf of company B. Now the clearing accounts have open items in their accounts (in respective co
-
Connection to host service 3299 timed out
Hi all, When SAP tries for logging in to our quality servers SAP is having timed out issue. "Connection to host 204.103.218.70 service 3299 timed out". But our quality ip address is 204.103.218.73. Please help me out as we need to perform critical te