Inter Company Clearing account OBYA

What happens to the open items created in the inter company clearing accounts created in OBYA?
i.e I have made a posting of a rent paid by company A on behalf of company B. Now the clearing accounts have open items in their accounts (in respective company codes). How are these treated?

Hello,
You can post the cross company code postings even between two controlling areas. The system does not prevent to post documents between two company codes in two controlling area. Need not necessarily they should be under one operating concern. Provided you have to make sure that you have followed the following points:
In OBY6 - To company codes must be assigned to same Company, meaning that you mus thave created a Company and that company must have been assigned to these two company codes.
OBYA - You should maintain the clearing accounts in both the company codes. Meaning that you are posting one leg in one company code and the other leg in the other company. Therefore, it is required to have the missing legs in each company code.
Company Code1 - Posting Key 40 - Clearing Account
Company Code1 - Posting Key 50 - Clearing Account
Company Code2 - Positng Key 40 - Clearing Account
Company Code2 - Posting Key 50 - Clearing Account
OB08 - In case if the two company codes have different local (company code) currencies, you may maintain the exchange rates.
You can now go to F-02 and post a cross company code transaction giving the first leg in first company code and the second leg in second company code. Missing leg in the first company code will be posted to the GL Account mentioned in OBYA and the missing leg in the second company code will be posted to the GL Account mentioned in OBYA. That means you will have four line items overall.
The system will post three document.
Document 1 in First Company Code
Document 2 in Second Company Code
and
Document3 - Cross Company Code Document.
The cross company code document consists of the first company code document number plus company code plus last two digits of the fiscal year.
Hope this must have clarified your doubts.
Please let me know in case if you need further details.
Thanks,
Ravi

Similar Messages

Inter company clearing account BUV

Dear gurus,
I have a question about cross company transfer.
When I use Plant to plant transfer (belong to different com.code), system will generate 2 accounting documents at the same time after transfer:
The 1st one: transaction key BUV will have account: 275015: GINI-Interco
I think in second accounting doc, 275015: GINI-Interco will appear again to be cleared. But it is a vendor account, which is same as setting in OBYA.
So, my question is where the account 275015: GINI-Interco come from, where to config it?
I checked and this account is not reconciliation account of Vendor.
Thanks a lot,
Hong

Financial Accounting > General Ledger Accounting > Business Transactions > Prepare Cross-Company Code Transactions (OBYA)

F110 Inter company clearing

Hi Guys,
AFter paying from once co. code to a vendor in the other co code
what are the next steps to be taken for clearing?
Do we need to do anything after doing inter company payments through F110.
Thanks
srikanth.

it is automatically updated becoz thru obya we mention inter company clearing a/c so it is automatically updated for Vendor masters as well as bank out going clearing accounts need not necessary any other configurations.

RE:Inter-company clearing tcode znetclr.

Hi ,
I want to know about Inter-company transcations.Please any one help me with some information ,sites on inter-company clearing with tcode znetclr. please help me .
Any help is higly appreiciated.
Thanks

Hi Van,
The way you set-up OBYA depends on how you intend to handle inter-company transactions.
1. If your intention is to create payable and receivable in both company codes which would now be settled when you carry out your normal pament run(F110), then the following are the config set-up you would have to make:
a). First create Company A as a Vendor(XK01) and a Customer(XD01) in company code B
b). Create Company B as a Vendor(XK01) and a Customer(XD01) in company code A.
c). Go to transaction code OBYA, when prompted for company code, type company code A into the first entry box and company code B into the second. Press enter.
d). In the first frame, "Debit Posting Key" should be "01" and "Account Debit" should be Company Code B Customer account number created in (b) above (assuming transaction is posted in A and cleared in B); "Credit Posting Key" should be "31" and "Account Credit" Company Code B Vendor account number created in (b) above.
Repeat the same thing for the second frame box, but this time around, use Customer a/c number and Vendor a/c number created in (a) above. Save your entries.
Your inter-company transactions via Account Payable/Receivable is ready for use.
If you want to use the G/L approach, let me know and i would outline the steps also.
Please award points if found useful.
Regards,
Jacob

Inter segment clearing account details - view

Entries will be auto posted in inter segment clearing account, when two or more profit centre is there in a single document. Now i want to view the details or line items. How to view, through which document the entry is generated.
From any table-field also now problem.

Does anyone has an idea on this?
The point is I dont understand why the difference is existing in intersegment/profit center clearing account.
And the point is the account is showing up in the trial balance.
Regards
Soujanya

Inter company stock transfer - OBYA

Hi SAP folks,
I have a small question on TC: OBYA
We have 2 co codes (CC10 & CC20) and 2 GL accounts (110510 & 110520). Now i am doing inter company stock transfer from CC10 to CC20. Here, 110510 a/c is belongs to CC10 and 110520 a/c is belongs to CC20. How should i configure these accounts in TC: OBYA.
Is it mandatory to give gl accounts in company code 1 and co code 2. In OBYA....
Co Code1
Receivable                      Payable
Debit P.K.                      Credit P.K.
Acct debit                      Acct credit
Co Code2
Receivable                      Payable
Debit P.K.                      Credit P.K.
Acct debit                      Acct credit
Thanks
Sure will assign good points

Dear Babu,
Thanks for your inputs.
My question is how to give GL accounts in TC: OBYA? I am giving some information for your kind reference:
Co code1 - CC10                      Co code2 - CC20
GL A/c - 110510                       GL A/c - 110520
Now i am doing stock tr from Co code1 to Co code2. How should i configure in TC: OBYA? Please look at the following fields and give us your inputs......
Co code1:
Posted in - CC10
Cleared against - CC20
Receivable                                           Payable
Debit PK -                                               Credit PK -
Acct debit -                                             Acct credit -
Co code2:
Posted in - CC20
Cleared against - CC10
Receivable                                           Payable
Debit PK -                                               Credit PK -
Acct debit -                                             Acct credit -
Thanks

Cross company clearing accounts set up tcode

When the paying company is not sending company and for that we need to do intercompany clearing account set up .
What is transaction code? Just slipped out of my mind.
Thanks alot
Kavi

Hello Kavitha,
you can use transaction code OBYA for configuration of inter-company payments/transactions. In OBYA you define clearing accounts. These clearing accounts represent the receivables and payables between company codes which result from central purchasing or payment. Here you want to pay vendors of 1400 co.cd through 1100 co.cd., means you use Central payment configuration
If useful pl assign points*****
Thanks
Para

Inter company posting - Accounting entry

Hi,
I need some clarification on the logic behind the inter company accounting entry.
Issue is as below:
My client tries to post an inter company accounting entry between co.code:ABC &XYZ as below
40 100000a/c(dividend payable) ABC 1000 u2013 balance sheet a/c
50 200000A/C (Investment income) xyz 1000 - profit & loss a/c - cost center 10010 u2013 profit center 10010
100000a/c(dividend payable - is a balance sheet account
200000A/C (Investment income) - is created under profit and loss group
Our client is tried to post an intercompany as above. While posting of the above entry they got a message that profit center 10010 is not assigned to co.code ABC. But my client is asking, why I should enter either cost center or profit center details in balance sheet account.
Co.code: ABC was not assigned to profit center 10010.
If we try to enter either a cost center or profit center in the first line item related to gl account 980630, we are able to post the entry.
Can someone suggest me the logic behind this entry?
My client is working on ECC 5.00 with New GL
Thanks in advance
Prasad

Hi
The issue is with the Document spliting logic.
You client should have enabled the inheritance indicator in the New G/L configuration. So by the way of the configuration he would have done (Assigning the G/L for doc splitting & the relevant document types), when he is entering the CC/PC for the revenus line item of 1 company code the system will inherit that PC to the dividend payable G/L of the 2nd company code.
During the above step the system will check whether the PC is assigned to the 2nd Compnay code. During this check the system is throwing error as mentioned by you.
Answer to your clients question regarding why to enter the PC / CC for the balance sheet Item
For the balance sheet item there is no need to enter the cost center, but when it comes to profit center,(There should be a configuration, which makes the PC as mandatory - as part of the document splitting configuration, Based on this configuration the system will expect the PC in all the line item) based on the above mentioned configuration you have to enter the Profit center.
Hope this clarifies your question. If you need further info in finding the relevat config details kindly let me know.
Regards
R.Karthigayan

Inter-company Clearing Process

Inter-company sub-ledger is cleared manually using F-30 on our current process. The steps are as below:
There are 4 steps to the process
Step1. FBICS3 Select Document (SAP)
Step2. FBICA3 - Assign document automatically (SAP)
Step3. Spreadsheet for manual analysis (Outside SAP)
Step4. F-30 Transfer with Clearing (SAP Manual clearing)
Step 2 FBICA3 will assign and match the reconciliation items automatically but it does not cleared the items automatically. Therefore, further analysis has to be done and reconcile items will be manually cleared using F-30.
May I know is there a way to clear all the reconciliation items automatically during step 2 as FBICA3 has already assigned and matched the reconcile items? If this is not the case, what are the other options apart from F-30 and ABAP program?
Thank you.
Francis

IN the due course of buisness the companies has to either make a payment or make a Journal entry manually eliminating this.
If you have implemented consoldation these entries will automatically get eliminated at Group level.
Reward if useful.
sarma

Inter Company transfer Accounting entry without loss or profit

Hi Experts,
I want to transfer an asset between to legally independent co codes( Group is same, still we are using different trading partners for consolidation) without posting revenue or expense.
Co Code 1000 , Company 1000(assigned to co code 1000)
Co code 2000, company 2000( assigned to co code 2000) both company codes using same chart of accounts, same chart of depreciation and same fiscal year.
I want trasfer asset 320000 from co code 1000 to asset 110000 in co code 2000 ..
Gross book value of asset 12000 - Accumulated depreciation 3000, I want transfer with same value.
Is it possible in SAP to post below accounting entry in ABT1N transaction with Standard Configuration. or Do i need to use any other transaction to post the below entry.
1000 co code
Asset 320000 APC                             12000 credit
Asset 320000 Accumulated dep           3000 debit
Inter Company receivables - 2000             9000 Debit
2000 Co code
Asset 110000 APC                           12000 Debit
Asset 110000 Accumulated dep        3000 Credit
Inter company payables                      9000 Credit
If any body has faced similar scenario, please guude me..
Thanks in Advance.
Regards
Murali

Hi,
None of them are useful scanned around in the Google, not able to get clue to get the above entry.
Dear expert any body can through some light.
Regads
Murali

Inter-company expenses

Hi all,
Consider the example:
Assume that there are 3 companies belonging to the same business group, represented as 3 different company codes, say A, B & C, in the same SAP system [P01].
Now, company A incurs expenses on behalf of companies B & C say travel expenses of the MDs of companies B & C.
CASE 1:
Inter-company clearing accounts are set-up between the company codes in the SAP system [P01] and hence Inter-company posting of expenses happen as below:
Books of A:
Dr Inter-company B A/c 5
Dr Inter-company C A/c 5
Cr Bank / Vendor for expenses 10
Books of B:
Dr MD's Travel exps A/c 5
Cr Inter-company A A/c 5
Books of C:
Dr MD's Travel exps A/c 5
Cr Inter-company A A/c 5
Can anyone let me know the relevant program through which this functionality has been enabled in SAP FI.
CASE 2:
Assume that company A is on an SAP system [P02] that is different from that of the other company codes B & C [P01].
Now, taking the same example as above, is it possible to use the same standard SAP inter-company functionality in FI to post the inter-company expenses from company A to companies B & C?
Is there is any other alternative solution ?
Some gyan please..
Bhargav

Hello,
You can post the cross company code postings even between two controlling areas. The system does not prevent to post documents between two company codes in two controlling area. Need not necessarily they should be under one operating concern. Provided you have to make sure that you have followed the following points:
In OBY6 - To company codes must be assigned to same Company, meaning that you mus thave created a Company and that company must have been assigned to these two company codes.
OBYA - You should maintain the clearing accounts in both the company codes. Meaning that you are posting one leg in one company code and the other leg in the other company. Therefore, it is required to have the missing legs in each company code.
Company Code1 - Posting Key 40 - Clearing Account
Company Code1 - Posting Key 50 - Clearing Account
Company Code2 - Positng Key 40 - Clearing Account
Company Code2 - Posting Key 50 - Clearing Account
OB08 - In case if the two company codes have different local (company code) currencies, you may maintain the exchange rates.
You can now go to F-02 and post a cross company code transaction giving the first leg in first company code and the second leg in second company code. Missing leg in the first company code will be posted to the GL Account mentioned in OBYA and the missing leg in the second company code will be posted to the GL Account mentioned in OBYA. That means you will have four line items overall.
The system will post three document.
Document 1 in First Company Code
Document 2 in Second Company Code
and
Document3 - Cross Company Code Document.
The cross company code document consists of the first company code document number plus company code plus last two digits of the fiscal year.
Hope this must have clarified your doubts.
Please let me know in case if you need further details.
Thanks,
Ravi

Inter-Company Reconciliation in ECC 6.0

Hi Guru's,
We are implementing ECC 6.0 version for 560 Company Codes and wondering do we need to configure the new Inter-Company functionality for reconciliaiton. It gives me a feeling that this functionality makes more sense if you have Company Codes in different clients/different systems etc., To my knowledge all inter-company postings within a client should get reconciled automatically.
Could someone please share some your views on this?
Thanks in advance.

Hi
Inter-company adjustment and transactions are taken care of using the inter-company clearing accounts through automatic account determinations. In ECC6, you have the option of defining segments and assignment of profit centres to segments. When two profit centres/segments are involved in posting (for ex. in the case of two different companies and hence two profit centres), system would automatically pass entries in the segment clearing account to effect the adjustment of involvement of different segments in one transactions. Through this, the transaction gets balanced in terms of segments or profit centres as the case may be. If you have made document splitting active, the entries are checked for balancing before posting in fact. thus the intercompany transactions are reconciled automatically.

Inter company billing - how to post to GL accounts and not sub-ledger

Hi,
During Inter company billing, instead of creating Inter company customer and vendor invoice, there is requirement to post to Inter company GL accounts. How do we tweak the system to post to Inter company GL accounts instead of IC Customer/ Vendor?
Thanks,
Mukul

Use t-code OBYA and instead of vendor/customer accounts use GL Accounts. This should help you post directly to GL versus Customer/Vendors.
Dan

Inter company Automatic postings from Customer to Vendor

Dear experts
I am working on connecting two company codes where billing invoice of one company code 100 will be vendor postings for other company code 200 in the same server of SAP version 4.7
Requirement is
In company code 100, when Sales order is billed in SAP, it will post relevant documents in C.Code 100 at the same time, it should also post the relevant documents in C.Code 200 as vendor postings. where C.Code 100 rendered services to C.Code 200.
Request your help and advices to meet above requirement.
Both company codes are in same server of SAP.
Thanks in advance.
S Habib Pasha.

Dear Habib,
I think the issue is you've got confused as to how to enter inter-company postings in the system.
Consider the double entry you need to post. In config what you set up is the clearing accounts (OBYA). What you need to enter is the Revenue/Cost accounts which may be different for each postings.
For E.g consider the following.
Company 100 sells material to company 200.
In F-02 what you will posting will be:
Company          GL A/c                      Amount
100     Cr     Revenue A/c      10,000
200     Dr     Material Cost      10,000
Once you simulate, you will see
Company          GL A/c                     Amount
100     Cr     Revenue A/c      10,000
200     Dr     Material Cost      10,000
100     Dr     Inter-co 200       10,000
200     Cr     Inter-co 100       10,000
Hope this is clear.
Rgds
Nadini

Inter company Posting

Hi Gurus,
I have a query on 2 company codes transaction. Lets say company A and company B. Company A has a vendor which is company B (Vendor B) and company B has a customer which is company A (Customer A).
For example:
Company B will send invoice to Company A with the amount of $100 (incoming - AR)
Company A will receive invoice from Company B with the amount of $100 (outgoing - AP)
As far as I know, we can use OBYA to setting up this. May I know, is there a way to park the document first for verification before real posting is done. This is needed so that both company codes can check whether the invoice is charging correctly or not.
Any advise would be appreciated & rewarded.
Many thanks.

Morgan,
The Intercompany transactions are like this - Hope this helps.
For Ex: Maintenance expenses for company code 1000 paid by company code 1001. The entry will be entered into the system as follows using FB01:
Document Header will be for company code 1000 and you will Debit Maintenance Expenses for $100. In the second screen, you will enter the Cash Account but in New Co. Code field, you will enter 1001 and credit the account with $100. When you post this transaction, the system will post 2 documents automatically, one in co. code 1000 and the other in 1001 and the entries will look like below:
In company code 1000:
Maintenance Expenses A/c Dr
To Inter-Company Clearing A/c (Account assigned in OBYA)
In company code 1001:
Inter-Company Clearing A/c Dr
To Cash A/c
You will only see 2 documents - One in Selling Co. Code, one in receiving co. code.
The only scenario that comes to my mind where you can get 3 documents are Dropship scenarios, wherein a customer for company code 1000 needs a product, which is manufactured by company code 1001. In this case, the sales order is created for the sales org associated with company code 1000 and the shipping plant will be the one that belongs to 1001.
When the invoicing is done, there will be 3 different sets of entries that will be generated.
1. In company code 1000 - Sales will be booked by Debiting End Customer and crediting the sales account.
2. In company code 1001 - Inter-Company document is posted by debiting company code 1000 (A/R account) and crediting the Inter-Company Sales Account.
3. In Company code 1000 - The payable is booked by crediting the company code 1001 (A/P account) and debiting the cost of goods sold account.
Assign points if found useful.
Thanks,
Nandita

Inter Company Clearing account OBYA

Similar Messages

Maybe you are looking for