Need to store sensitive data in a table, need to encrypt or data masking

Hello,
I have a table that contains a column of sensitive data. Which is a good method to encrypt this column? How about data masking the column? Other methods? Thank you in advance.

Will need to share with us who is supposed to see and not supposed to see the data and under what circumstances.
There are a number of ways to restrict access: via view/roles/privileges, encryption (DBMS_CRYPTO), or TDE if you want to buy the Advanced Security extra-cost option for Enterprise Edition.

Similar Messages

Unable to View Data in the table of a CDC enabled Data Store.

hi all,
I am trying to import some tables from the external metadata from my CDC enabled datastore, but after importing the tables i m unable to view the data in the table,
where as the same table in a normal datastore (Without CDC) is showing data in the Desginer.
Can anyone help me out???
is there any settings which we need to do, to see the data in a CDC enabled DS.

any help ????

Complicated Question (see pdf): Use data from one table to find the same data in a second table and take other data from that table and place it in a third table. :)

I don't even know if this is posible.
I'm using iwork '09
View PDF

I hope I can clarify:
For our purposes here:
Table 1 = "Step 2 - Product Sizes"
Table 2 = "Option id Master"
Table 3 = "Export - Product Info"
Table 1:
The user would enter values for "productcode," "Horz," and "Vert"
"Size" would auto fill based on values in Horiz and Vert (I have this taken care of already).
Table 2: This is a completely static table that I want to search against. - Data from other tables in the doc does not alter or change the data in this doc.
We just want to look at table 2. Find the existing value in "table 2 : size" column that matches the "table 1 : size" column and then pull the "optionids" and "productprice" from that row.
Can the value from "Table 1 : Size" be used as a search term in "Table 2 : Size?"
Table 3: The user does not enter any values on this table.
"productcode" is pulled from table 1 - "Table 1 :: A5" = "Table 3 :: A5"
"optionids" and "productprice" are pulled from Table 2 columns "D" and "E" - however we do not know which Table 2 row it is pulling from until we enter data in Table 1.
As I'm writing this I'm realizing that
A. this is probably really confusing to you.
B. this may be impossible inside of numbers.
If you have some other method that would facilitate the same out come but be structured differently please let me know.
--- maybe to help you understand further what I am doing here is my current workflow:
I record the size of a piece of art.
Then I manually go to my "Option id Master" and find the same size.
I then copy the corresponding "optionids" and "productprice" cells. (these options control the prices displayed on my website)
I got to my "Export - Product Info" table and paste the values in the corresponding cells.
I was hoping to automate this as it takes a long time when you have hundreds of products.
Thanks for the help!

Line Chart - getting data from two table to behave as 1 data series

I'm using the 'Personal Budget' template, and have two tables titled 'Annual Budget by Month: 2009' and 'Annual Budget by Month: 2010'. These tables show, as their last row, my total savings. I want to set up a line chart to display the (downward) trajectory of my savings in one continuous line.
However, if I create a line chart, the two data sets from the two tables are displayed as two lines, one below the other. If I convert it to a column chart, and then switch to columns instead of rows as the Plotting Orientation (data series button in the upper left of the table), the columns do display correctly. Can anyone tell me how I can get the line version to work?

spiff,
I think the solution to your problem is to create a summary table that gathers the data from all your month tables, then plot the summary. Remember to put the category names into a Header row or column so they will automatically show up on the chart axes.
Jerry

Need help in retrieving data from database table

Hi ,
I have a Ztable with primary key.The table gets automatically sorted on primary key
But I want to retrieve the ztable data in the order in which i enter data in to table.
EXAMPLE :
I enter data as : mydata
action
welcome
When i retrieve this data internal table should be filled in the same order.
Your inputs will be very helpful.
Thanks in advance.

You will need to change your table to use a number as the first key field (after the client) which you increase by 1 each time you make a new entry. Alternatively you can add a data/time stamp to the end of your table and use this to sort your internal table once you've extracted the records.
Regards,
Nick

Need to Store Infinite Tree in a single table

Hi,
I need to create infinite tree and also need to store it into a single table. I will perform operations like node deletion,movement etc.. according to the operation my tree should get updated.Can anyone please give me any suggestion??
Thanks in Advance,
Sumeet Gupta

Hi,
Not much to go on, but this table can hold an infinite tree. Work from that.
SQL> create table tree (node number(15) not null, parent_node number(15))
Table created.
SQL> alter table tree add constraint tree_pk primary key (node)
Table altered.
SQL> alter table tree add constraint tree_tree_fk foreign key (parent_node) references tree (node)
Table alteredEdit:
If you are not already familar with hierarchial queries, I suggest you look here:
[Hierarchial query|http://download.oracle.com/docs/cd/B28359_01/server.111/b28286/statements_10002.htm#sthref9434]
Regards
Peter
Edited by: Peter on Mar 3, 2009 7:35 AM

Adding data to multiple tables using one form in Access 2010?

Hi All,
I have a access database with two tables and I want to create a single form to enter data into that tables.
How to adding data to multiple tables using one form in Access 2010?
I don't have to much knowledge of access database?
Please help me
Thanks
Balaji

You really don't enter identical data into 2 tables. You enter dat into one single table, and then you have an unique identifier that maps to another table (you have a unique relationship between two tables).
Maybe you need to read this.
http://office.microsoft.com/en-001/access-help/database-design-basics-HA001224247.aspx
Think about it this way... What is you update data in 2 tables, and then the data in one of those tables changes, but the data in the other table does NOT change. WHOOPS!! Now, you've got a BIG problem. For instance, you have a customer
named Bill Gates. In one Table you update Bill's address to 1835 73rd Ave NE, Medina, WA 98039 and in the other table you accidentally update Bill's address to 183 73rd Ave NE, Medina, WA 98039. Now you have 2 addresses for Bill. Why would
you want that??? Which is right? No one knows. If you have one address, you just have to update one address and if there is a mistake, you just have to update one address, but you don't have to waste time trying to figure out which is right
and which is wong...and then update the one that is wrong.
Post back with specific questions.
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

How to manipulate data over two tables in same database.

hi, i am not a profficient java programmer, i was trying to copy filtered data from one table to another table.
i was trying to use
public static Connection getConnection() throws Exception {
     Driver d = (Driver)Class.forName
         ("sun.jdbc.odbc.JdbcOdbcDriver").newInstance();
     Connection c = DriverManager.getConnection
         ("jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=stuff.mdb");
     return c;
and then
    theConn = myConnection.getConnection();
      ResultSet rs;
      Statement stmt;
      String sql;
      stmt = theConn.createStatement();
      sql = "SELECT * FROM shisab, myhisab WHERE shisab.Who_Bought ='ron'";
           rs = stmt.executeQuery(sql);
           while (rs.next()) {
            System.out.println("date:"+rs.getString("shisab.Date"));
      rs.close();--------------------------------------
it does not show anything! in the output! i tried many things but i thing it is not supporting my multiple table syntax , i.e.: table1,table2 in teh from clause.
please help!
i just need to filter stuff from the shisab table and write the filtered data into
the myhisab table.

Your problem isn't in the Java code, it's your SQL code...
Your statement, as submitted, is an improperly formed multi-table select, where you never joined the second table. That won't work.
You need to look into the INSERT INTO statement. The exact syntax of your statement will depend on whether or not both tables contain the exact same column names, etc. A generic example based on what you have might look like:
INSERT INTO myhisab SELECT * FROM shisab WHERE Who_Bought = 'ron'HTH

Data from 3 tables having latest dates

Hi,
Need some help with PL/SQL code, I need to write a code which will get data from 3 tables all with the latest date.
For a particular ACT_CODE the output of the SQL query should show data having the latest dates from 3 tables, if there is no
date in the table, it should show the remaining data (think left join will do the trick here)
Table Names:
Institution_UPDT aiu
ASQ_CONTACT ac
GR_AUTHORIZE gr
All 3 tables have ACT_Code as common
Column Names
INSTITUTION_UPDT aiu -- aiu.ACT_CODE,aiu.project_id as proj,aiu.UPDT_TYPE_ID, aiu.USER_ID, aiu.UPDT_DATE
ASQ_CONTACT ac -- ac.ACT_CODE as contact_code,ac.project_id,ac.first_name, ac.middle_initial,ac.last_
name,ac.title,ac.status,ac.status_date
GR_AUTHORIZE gr --gr.ACT_CODE as grad_code,gr.name, gr.title AS grad_title, gr.submit_date
The date column names are
ac.status_date,
aiu.UPDT_DATE and
gr.submit_date
Thank you everyone
appreciate your help
Jesh

Hi, Jesh,
user11095252 wrote:
That is correct, I want to include all the columns from ASQ_Contacts, Institution_UPDT and GR_AUTHORIZEOh! You want all columns from all three tables, not just ASQ_Contacts. That changes the problem considerably!
UNION requires that all prongs have the same number of columns, and that the datatypes of the columns match. That's no problem if we just need act_code and a date from each one. If we just need additional columns from one table, it's easy to add literal NULLs to the other prongs to serve as the additional columns. But if we need all (or even several) columns from all three tables, that's no good. So let's revert to your original idea: outer joins.
I want to display only one row which has the latest date with the most recently updated time (example:mm/dd/yyyy hr:min:sec am/pm)Yes, but what if there is a tie for the most recently updated time?
In case of a tie, the query below will pick one of the contenders arbitrarily. That may be fine with you (e.g., you may have UNIQUE constraints, making ties impossible). If you need a tie-breaker, yiou can add more columns to the analytic ORDER BY clauses.
WITH     aiu     AS
     SELECT     institution_updt.*     -- or list columns wanted
     ,     ROW_NUMBER () OVER ( PARTITION BY act_code
                         ORDER BY        updt_date     DESC
                       ) AS r_num
FROM     institution_updt
WHERE     act_code     = :p1_act_code
AND     project_id     = :p2_project_id
,     ac     AS
     SELECT     asq_contact.*          -- or list columns wanted
     ,     ROW_NUMBER () OVER ( PARTITION BY act_code
                         ORDER BY        status_date     DESC
                       ) AS r_num
FROM     asq_contact
WHERE     act_code     = :p1_act_code
AND     project_id     = :p2_project_id
,     gr     AS
     SELECT     gr_authorize.*          -- or list columns wanted
     ,     ROW_NUMBER () OVER ( PARTITION BY act_code
                         ORDER BY        submit_date     DESC
                       ) AS r_num
FROM     gr_authorize
WHERE     act_code     = :p1_act_code
SELECT     *     -- or list columns wanted
FROM          aiu
FULL OUTER JOIN     ac     ON     ac.act_code     = aiu.act_code
               AND     ac.r_num     = 1
               AND     aiu.r_num     = 1
FULL OUTER JOIN     gr     ON     gr.act_code     = NVL (ac.act_code, aiu_act_code)
               AND     gr.r_num     = 1
;That's a lot of code, so there may be typos. If you'd post CREATE TABLE and INSERT statements for a few rows of sample data, I could test it.
In all places where I said "SELECT *" above, you may want to list the individual columns you want.
If you do that in the sub-queries, then you don't have to qualify the names with the table name: that's only required when saying "SELECT *" with another column (r_num, in this case).
It's more likely that you won't want to say "SELECT *" in the main query. The three r_num columns, while essential to the query, are completely useless to your readers, and you might prefer to have just one act_code column, since it will be the same for all tables that have it. But since it may be NULL in any of the tables, you'll have to SELECT it like this:
SELECT COALESCE ( aiu.act_code
                 , ac.act_code
                 , gr_act_code
                 ) AS act_codeThe query above will actually work for multiple act_codes. You can change the condidition to something like
WHERE   act_code IN (&act_code_list)If so, remember to change it in all three sub-queries.

URGENT - How to change data in a table

I have created the basic table to display some data. But how do I change some of the data in the table. I generate the data within my program and then need to display the new table data in the same original table.

So far I am just testing with the example codes from the sun website. How would I change the name Mary to say Kate? Do I have to implement an abstract table model? Can I just change the value in the array or something?
Thanks in advance
// create the table
               Object[][] tableData =
            {"Mary", "Campione",
             "Snowboarding", new Integer(5), new Boolean(false)},
            {"Alison", "Huml",
             "Rowing", new Integer(3), new Boolean(true)},
            {"Kathy", "Walrath",
             "Chasing toddlers", new Integer(2), new Boolean(false)},
            {"Mark", "Andrews",
             "Speed reading", new Integer(20), new Boolean(true)},
            {"Angela", "Lih",
             "Teaching high school", new Integer(4), new Boolean(false)}
          String[] columnNames = {"First Name",
                                "Last Name",
                                "Sport",
                                "# of Years",
                                "Vegetarian"};
          final JTable table = new JTable(tableData, columnNames);
        table.setPreferredScrollableViewportSize(new Dimension(500, 100));
          //Create the scroll pane and add the table to it.
        JScrollPane scrollPane = new JScrollPane(table);
          //Add the scroll pane to this window.
        //getContentPane().add(scrollPane, BorderLayout.CENTER);
          displayPanel.add(scrollPane);

Data fetch from table

i have to select data from a database table into internal table but i want that it shud be selected as it is means i have a char 30 field which may have CAPS and small values in table but in the internal table it comes as all CAPS but it shud come as it is e.g "Data" shud come as "Data" in internal table but it comes as "DATA".

Just check the Domain of the concerned field. There will be a characteristic check box called "lower case" in the Definition tab of your domain. See if that is Flagged. If that is flagged, then the stored record will be case sensitive. In best practice, you should not have that flagged, So that the records will not be case sensitive and you will not have to face a similar situation.
Hope this helps.

Putting different tables with large amounts of data together

Hi,
I need to put different kinds of tables together:
Example 'table1' with columns: DATE, IP, TYPEN, X1, X2, X3
To 'table0' with columns DATE, IP, TYPENUMBER.
TYPEN in table1 needs to be inserted into TYPENUMBER in table0, but through a function which transforms it to some other value.
There are several other tables like 'table1', but with slighty different columns, that needs to be inserted into the same table ('table0').
The amount of data in each table is quite huge, so the procedure should be done in small pieces and efficiently.
Should/Could I use data pump for this?
Thank you!

user13036557 wrote:
How should I continue with this then?
Should I delete the columns I don't need and transform the data in the table first and then use data pump,
or should I simply make a procedure going through every row (in smaller pieces) of 'table1' and inserting it to 'table0'?You have both the options .. Please test both of them , calculate time to complete and implement the best .
Regards
Rajesh

Load Huge data into oracle table

Hi,
I am using oracle 11g Express Edition, I have a file of .csv forma, Which has a data of size 500MB which needs to be uploaded into oracle table.
Please suggest which would be the best method to upload the data into table. Data is employee ticket history which is of huge data.
How to do the mass upload of data into oracle table need experts suggestion on this requirement.
Thanks
Sudhir

Sudhir_Meru wrote:
Hi,
I am using oracle 11g Express Edition, I have a file of .csv forma, Which has a data of size 500MB which needs to be uploaded into oracle table.
Please suggest which would be the best method to upload the data into table. Data is employee ticket history which is of huge data.
How to do the mass upload of data into oracle table need experts suggestion on this requirement.
Thanks
SudhirOne method is to use SQL Loader (sqlldr)
Another method is to define an external table in Oracle which is allowing you to view your big file as a table in database.
You may want to have a look at this guide: Choosing the Right Export/Import Utility and this Managing External Tables.
Regards.
Al
Edited by: Alberto Faenza on Nov 6, 2012 10:24 AM

How to insert data into two tables linke with foreign key..

I have two tables
1)EMP(emp_ID,username,emp_type_code)
emp_ID is primary key, emp_type_code is a foreign key references emptype table.
2)emptype(emp_type_code,emp_type_descripton)
emp_type_code is primary key
Could anyone help me ..how to insert data into EMP table. How to insert data into two tables linke with foreign key..

CREATE TABLE "CATDB"."DWDIMUSER"
"USER_ID" NUMBER(10,0) NOT NULL ENABLE,
"SPECIALTY_ID" NUMBER(10,0),
"FULLNAME" VARCHAR2(20 BYTE),
"FNAME" VARCHAR2(20 BYTE),
"LNAME" VARCHAR2(20 BYTE),
"USER_SUBTYPE" VARCHAR2(20 BYTE),
CONSTRAINT "DIMUSER_PK" PRIMARY KEY ("USER_ID") USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT) TABLESPACE "CATDB" ENABLE,
CONSTRAINT "DIMUSER_DIMSPECIALTY_FK" FOREIGN KEY ("SPECIALTY_ID") REFERENCES "CATDB"."DWDIMSPECIALTY" ("SPECIALTY_ID") DISABLE
CREATE TABLE "CATDB"."DIMSPECIALTY"
"SPECIALTY_ID" NUMBER(10,0) NOT NULL ENABLE,
"SPECIALTY_NAME" VARCHAR2(100 BYTE),
CONSTRAINT "DIMSPECIALTY_PK" PRIMARY KEY ("SPECIALTY_ID") USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT) TABLESPACE "CATDB" ENABLE
INSERT INTO DIMUSER (FullName, FNAME, LNAME, USER_TYPE, USER_SUBTYPE)
SELECT DISTINCT
Engineer AS FullName,
regexp_substr(Engineer , '[^,| ]+', 1, 1) as FName,
regexp_substr(Engineer , '[^,| ]+', 1, 2) as LName ,
'Engineer'
FROM EMPLOYEELOOKUP;
INSERT INTO DIMSPECIALTY (SPECIALTY_NAME)
SELECT DISTINCT SPECIALITY
FROM EMPLOYEELOOKUP;
COMMIT;
CREATE TABLE employeelookup ...IS A TABLE THAT HAS ALL THE DATA NEDED TO BE FILLED IN BOTHE TABLES...
CREATE TABLE "CATDB"."EMPLOYEELOOKUP"
"EMPLOYEELOOKUP_ID" NUMBER(10,0) NOT NULL ENABLE,
"ENGINEER" VARCHAR2(25 BYTE),
"SPECIALTY" VARCHAR2(20 BYTE),
CONSTRAINT "DIMSPECIALTY_PK" PRIMARY KEY ("EMPLOYEELOOKUP_ID") USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT) TABLESPACE "CATDB" ENABLE
DATA IN EMPLOYEELOOKUP
Engineer, Specialty,
John, Dow, Electronis,
Dow, Jons, Technician
Stan Smithers Sales
Mark, Richards Marketing
Jenny, Lane Marketing
John, Lee Sales
I NEED TO LOAD THE FOREIGN KEY IN DIMUSER FROM THE DIMSPECIALTY TABLE?
BY USING THE LOOKUP TABLE TO MARCH THE NAMES UNDER THE Engineer COLUMN, SPECIALTY COLUMNE DISTICTIVLY BY JOINING THE DIMSPECILTY TO RISTIVE THE PRIMARY KEY AND FILL IT IN THE DIMUSER TABLE AS A FOREIGNE KEY.

Delete all data of a table in Oracle before insert operation in BizTalk.

Hi,
I need to delete all the data of a table from Oracle before insert data into it from BizTalk. I can't create stored procedure on the oracle table or how to create a xml of the delete schema of the oracle table in the BizTalk with filter node has a blank
value because i need to delete all the data of the table so that i will send this xml as delete operation.
Thanks in advance.
Regards,
Gyan

You need to create two schemas: One for deleting all rows and one for inserting.
Then combine these Schemas into one and use the "CompositeOperation" SOAP Action Header.
Something like the below (a SQL Example, so the Schemas needs to be replaced by WCF-Oracle syntax)
<Request xmlns="http://CompositeTest.CompositeSchema">
<Delete xmlns="http://schemas.microsoft.com/Sql/2008/05/TableOp/dbo/Employee">
<Rows>
<Employee xmlns="http://schemas.microsoft.com/Sql/2008/05/Types/Tables/dbo">
</Employee>
</Rows>
</Delete>
<Insert xmlns="http://schemas.microsoft.com/Sql/2008/05/TableOp/dbo/Employee">
<Rows>
<Employee xmlns="http://schemas.microsoft.com/Sql/2008/05/Types/Tables/dbo">
<Name>John</Name>
<Designation>Manager</Designation>
<Salary>100000</Salary>
</Employee>
</Rows>
</Insert>
</Request>
Morten la Cour

Need to store sensitive data in a table, need to encrypt or data masking

Similar Messages

Maybe you are looking for