Need Very Urgently
Hi,
i have some questions which having issues.
please help me out this.
1.why and when we go Attribute Change Run.
2.Difference between Queued and V3 Unserialized Delta
3.How we create Global Calculated KF and Local Calc KF.
4.i have the scenario to generate report having fields like Doc_no, Plant, Comp_code,etc.the data are present in both ODS and CUBE. can i go for ODS or CUBE to create the reports.
thanks
magesh
Hi Magesh,
1.Inorder to reflect the changes for Master data you do the attribute change run. it is nothing but activation of your master data.
2. go through this web log from Roberto it good;/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
3.Right click on the keyfigures on the left hand side section the query designer;select calc key figure; give a technical name and a description save it.It will be used across the cube for all queries.
In case of structures created as local structures in the right hand side window under rows/columns and then you could save it globally by right clicking and giving a techname and description.
4.You can create on both it is based on the level of detail that the report has to carry. if detailed reporting make it on ODS other wise on Cube.
Hope this helps..
Best Regards,
DMK
*Assign points if it helps...
Similar Messages
-
Lenovo s510p touch top cover broken, top cover needed very urgently
i bought my lenovo ideapad s510p touch from usa in dec 2013, i only hav upgraded warranty.,
recently my laptop's TOP COVER has broken i need the part very urgently please any one can help meee please
LENOVO IDEAPAD S510P TOUCH TOP COVER ('a' COVER)
Link to picture/image
Link to picture/image
Link to picture/image
Link to picture/image
NEEDED VERY URGENTLY CAN ANYONE HELP ME PARTS ALSO NOT AVALIABLE SAID BY SERVICE CENTERS
Mod comment: Over sized pictures converted to links. Please see About-Posting-Pictures-In-The-ForumsSome posts have been removed.
Please do not post private information in these forums.
Andy
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество -
Hi every1,
i am in a very bad situation as i am very new to AS3, so i
need some help from any one who can help me out of this.
I have created a FLV Player using FLVPlayback Component
everything is working fine but the only problem is the rewind and
forward button behaves very strange when i test it on web page
residing in a webserver.
In brief i want to say that the rewind and forward control in
the application works alright when i play it in my local machine
but when i take the file to a web sever and play it the controls
behave very strange (when i click on the forward and rewind button
it just takes me to the end of the movie and to the start of the
movie at one shot which should not be the purpose of the rewind and
forward button).
So, somebody please look at my code below and i will be very
thank full to the person who can send me the correct code.
The code for the rewind and forward control is higlighted in
the below code. please help... .very urgent..........
import fl.video.*;
var flvSou:String;
var dynText:String;
myflv.autoPlay = true;
onscreen_play_btn.visible = false;
onscreen_replay_btn.visible = false;
if (myflv.playing) {
onscreen_play_btn.visible = false;
onscreen_replay_btn.visible = false;
//myflv.source = "Call_to_action.flv";
myflv.source = root.loaderInfo.parameters.flvSou;
dynTxt.text = String(root.loaderInfo.parameters.dynText);
slash_txt.text = "/";
myflv.playPauseButton = playPause_btn;
myflv.stopButton = stop_btn;
myflv.muteButton = mute_btn;
myflv.volumeBar = volume_bar;
myflv.volume = .6;
myflv.forwardButton = forward_btn;
myflv.backButton = back_btn;
myflv.seekBar = seek_bar;
myflv.bufferingBar = buffering_bar;
myflv.fullScreenButton = fullscreen_btn;
//========================= Actions for Button Controls
=========================//
//========================= Actions for Play and Pause Button
=========================//
playPause_btn.pause_mc.addEventListener(MouseEvent.CLICK,
clickHandlerPause);
function clickHandlerPause(event:MouseEvent):void {
//trace("clickHandler detected an event of type: " +
event.type);
//trace("the event occurred on: " + event.target.name);
trace("u clicked pause button");
onscreen_play_btn.visible = true;
//myflv.alpha = .5; // uncomment later
playPause_btn.play_mc.addEventListener(MouseEvent.CLICK,
clickHandlerPlay);
function clickHandlerPlay(event:MouseEvent):void {
//trace("clickHandler detected an event of type: " +
event.type);
//trace("the event occurred on: " + event.target.name);
trace("u clicked play button");
onscreen_play_btn.visible = false;
//myflv.alpha = 100; // uncomment later
if (onscreen_replay_btn.visible==true) {
onscreen_replay_btn.visible=false;
//========================= Actions for Play and Pause Button
=========================//
//========================= Actions for FLVPlayback
=========================//
myflv.addEventListener(MouseEvent.CLICK,
clickHandlerPauseFlv);
function clickHandlerPauseFlv(event:MouseEvent):void {
//trace("clickHandler detected an event of type: " +
event.type);
//trace("the event occurred on: " + event.target.name);
trace("u clicked video component button");
trace(myflv.totalTime);
if (myflv.playing==true) {
myflv.pause();
onscreen_play_btn.visible = true;
//myflv.alpha = .5; // uncomment later
} else {
myflv.play();
onscreen_play_btn.visible = false;
onscreen_replay_btn.visible = false;
//myflv.alpha = 100; // uncomment later
//========================= Actions for FLVPlayback
=========================//
//========================= Actions for Fullscreen Button
=========================//
fullscreen_btn.addEventListener(MouseEvent.CLICK,onFullScreenButtonClick);
function onFullScreenButtonClick(event:MouseEvent):void {
stage.displayState = StageDisplayState.FULL_SCREEN;
//or set it to normal like: stage.displayState =
StageDisplayState.NORMAL;
//========================= Actions for Fullscreen Button
=========================//
//========================= Actions for onScreenPlay Button
=========================//
onscreen_play_btn.addEventListener(MouseEvent.CLICK,onScreenPlayButtonClick);
function onScreenPlayButtonClick(event:MouseEvent):void {
trace("working");
if (myflv.playing==true) {
myflv.pause();
} else {
myflv.play();
//myflv.alpha = 100; // uncomment later
onscreen_play_btn.visible = false;
//========================= Actions for onScreenPlay Button
=========================//
//========================= Actions for onScreenReplay Button
=========================//
onscreen_replay_btn.addEventListener(MouseEvent.CLICK,onScreenReplayButtonClick);
function onScreenReplayButtonClick(event:MouseEvent):void {
trace("working");
myflv.play();
//myflv.seek(0);
onscreen_replay_btn.visible = false;
if (onscreen_play_btn.visible==true) {
onscreen_play_btn.visible=false;
//========================= Actions for onScreenReplay Button
=========================//
//========================= Actions for Stop Button
=========================//
stop_btn.addEventListener(MouseEvent.CLICK, StopButtonClick);
function StopButtonClick(event:MouseEvent):void {
myflv.seek(0);
//myflv.autoRewind = true;
//myflv.stop();
onscreen_replay_btn.visible = true;
//========================= Actions for Stop Button
=========================//
//========================= Actions for Button Controls
=========================//
//========================= Actions for Displaying Elapsed
and Total Time =========================//
myflv.addEventListener(MetadataEvent.METADATA_RECEIVED,
cp_listener);
function cp_listener(eventObject:MetadataEvent):void {
//trace("Elapsed time in seconds: " + myflv.playheadTime);
//trace("Total time is: " + eventObject.info.duration);
var rounded:int = Math.round(eventObject.info.duration);
var minutes:int = Math.floor(rounded/60);
var seconds:int = rounded%60;
flvTotalTime_txt.text = eventObject.info.duration;
flvTotalTime_txt.text = (minutes<10 ? "0" :
"")+minutes+":"+(seconds<10 ? "0" : "")+seconds;
//flvElapsedTime_txt.text = String(myflv.playheadTime);
stage.addEventListener(Event.ENTER_FRAME, updateTime);
function updateTime(ev:Event):void {
var rounded:int = Math.round(myflv.playheadTime);
var minutes:int = Math.floor(rounded/60);
var seconds:int = rounded%60;
flvElapsedTime_txt.text = String(myflv.playheadTime);
flvElapsedTime_txt.text = (minutes<10 ? "0" :
"")+minutes+":"+(seconds<10 ? "0" : "")+seconds;
//========================= Actions for Displaying Elapsed
and Total Time =========================//
myflv.addEventListener(Event.COMPLETE, com_listener);
function com_listener(eventObject:Event):void {
trace("movie complete");
myflv.stop();
onscreen_replay_btn.visible = true;
back_btn.addEventListener(MouseEvent.CLICK, BackButtonClick);
function BackButtonClick(event:MouseEvent):void {
myflv.play();
//myflv.autoRewind = true;
//myflv.stop();
onscreen_replay_btn.visible = false;
/************************************ THE CODE FOR FORWARD
AND REWIND CONTROL STARTS HERE *****************************/
var id1:Number;
forward_btn.addEventListener(MouseEvent.MOUSE_DOWN,
ForwardButtonDown);
function ForwardButtonDown(event:MouseEvent):void {
//forward_btn.onPress = function() {
//mklik_flv.pause();
var dest1:Number = myflv.playheadTime;
id1 = setInterval(function ():void {
myflv.seek(dest1 += 2);
}, 100);
forward_btn.addEventListener(MouseEvent.MOUSE_UP,
ForwardButtonUp);
function ForwardButtonUp(event:MouseEvent):void {
//forward_btn.onRelease = function() {
//myflv.play();
clearInterval(id1);
// ************************ Forward Button Function
// ************************ Rewind Button Function
var id2:Number;
back_btn.addEventListener(MouseEvent.MOUSE_DOWN,
BackButtonDown);
function BackButtonDown(event:MouseEvent):void {
//back_btn.onPress = function() {
//mklik_flv.pause();
var dest2:Number = myflv.playheadTime;
id2 = setInterval(function ():void {
myflv.seek(dest2 -= 2);
}, 100);
back_btn.addEventListener(MouseEvent.MOUSE_UP, BackButtonUp);
function BackButtonUp(event:MouseEvent) {
//back_btn.onRelease = function() {
//mklik_flv.play();
clearInterval(id2);
}how long is your flv (in seconds), if allowed to play without
ff/rewind/pause? -
File Upload Help Needed - Very Urgent
Dear All
I am making a application in Webdynpro for uploading an excel file to the server. Can someone give me a demo application so that I can run it and see whether my server is configured or not. Also I have made the application right now and have coded the need full. But when I select a file and say submit it shows me a page not found error. Currently I am working round the clock on my project and am stuck up here. Its very urgent can any body help please with an example or a demo application.
Regards GauravHi,
Check whether in server, MultipartBodyParameterName property is set to "com.sap.servlet.multipart.body" . You can check this by going to Visual Admin -> Cluster tab -> Services -> web container -> Properties sheet.
Do assign points if i answered your question.
Regards
Vasu -
How to convert PO sapscript layout to pdf - need VERY URGENT Help
Dear All,
Requirement: PO sapscript layout after some modifications (say, ZMEDRUCK) has to be converted to pdf. Through me9f user will be able to give ranges of PO numbers and can view the print preview for the po. After that on clicking the print button we get the printout of the pos one after another based on the user input of PO numbers.
Our requirement is that when the user will click on the "Print Preview" of po (rather than pressing the print button) it i.e. PO sapscript layout has to get converted to pdf.
If you have already encountered this scenario, could you please send me the source code regarding this at the earliest. If you want to email it to my personal id, please let me know so that I can give it to you. Thank you.
It will be very beneficial for mine if you can send me some source code in this regard. (FYI. We want only Print output of PO sapscript. So, Print Program /SMB40/FM06P [after copying it to our ZSMB40/FM06P program] need to be modified for downloading the PO into PDF where there is no FMs like OPEN_FORM, WRITE_FORM, CLOSE_FORM. So already available source code in SAP forums can not help me.)). Kindly help me at the earliest. Its VERY URGENT
Thank you.
Thanks & Regards
SudiptaHi Chaith,
Could you please provide me the source code regarding this at the earliest.
We want only Print output of PO sapscript. So we need to modify only the Print Program SAPFM06P after copying it to ZSAPFM06P for downloading of modified PO (ZMEDRUCK) sapscript layout into PDF.
I am already having some source code from sdn portral. I am attaching it herewith. But it's not working as some constants and variable values need to be given. We want to take download of PO into PDF from ME9F transaction itself.
Could you please provide necessary values in the missing constants and variables and kindly resend the corrected modified Source code to me so that I can run the same code to download the modified PO ZMEDRUCK into PDF . Need YOUR URGENT HELP...
DATA: l_druvo LIKE t166k-druvo,
l_nast LIKE nast,
aux_nast LIKE nast,
l_from_memory,
l_doc TYPE meein_purchase_doc_print,
ent_screen TYPE c,
ent_retco TYPE i,
toa_dara TYPE toa_dara,
arc_params LIKE arc_params,
aux_form LIKE tnapr-fonam.
DATA: otf LIKE itcoo OCCURS 0 WITH HEADER LINE,
lt_docs TYPE TABLE OF docs,
pdf_bytecount TYPE i,
nom_archivo TYPE string.
aux_form = 'ZMEDRUCK'.
l_from_memory = c_true.
SELECT *
FROM nast
INTO aux_nast
UP TO 1 ROWS
WHERE kappl = c_po " Purchase Order
AND objky = t_datos-ebeln
AND aktiv = space
ORDER BY erdat DESCENDING eruhr DESCENDING.
ENDSELECT.
aux_nast-sort1 = c_swp.
CLEAR ent_screen.
CLEAR ent_retco.
IF aux_nast-aende EQ space.
l_druvo = c_1.
ELSE.
l_druvo = c_2.
ENDIF.
l_druvo = '2'.
CALL FUNCTION 'ME_READ_PO_FOR_PRINTING'
EXPORTING
ix_nast = aux_nast
ix_screen = ent_screen
IMPORTING
ex_retco = ent_retco
ex_nast = l_nast
doc = l_doc
CHANGING
cx_druvo = l_druvo
cx_from_memory = l_from_memory.
CHECK ent_retco EQ 0.
CALL FUNCTION 'ECP_PRINT_PO'
EXPORTING
ix_nast = l_nast
ix_druvo = l_druvo
doc = l_doc
ix_screen = ent_screen
ix_from_memory = l_from_memory
ix_toa_dara = toa_dara
ix_arc_params = arc_params
ix_fonam = aux_form
IMPORTING
ex_retco = ent_retco.
CLEAR otf.
CALL FUNCTION 'READ_OTF_FROM_MEMORY'
EXPORTING
memory_key = l_nast-objky " PO Number
TABLES
otf = otf
EXCEPTIONS
memory_empty = 1
OTHERS = 2.
CALL FUNCTION 'CONVERT_OTF_2_PDF'
IMPORTING
bin_filesize = pdf_bytecount
TABLES
otf = otf
doctab_archive = lt_docs
lines = pdfout
EXCEPTIONS
err_conv_not_possible = 1
err_otf_mc_noendmarker = 2
OTHERS = 3.
CONCATENATE c_dest t_datos-ebeln c_ext INTO nom_archivo.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
bin_filesize = pdf_bytecount
filename = nom_archivo
filetype = c_bin
IMPORTING
filelength = pdf_bytecount
TABLES
data_tab = pdfout. -
I have problem in downloading a file through a servlet. Let me put my points clearly.
When a client requests my servlet using setcontenttype, setheader methods I prompt for the 'save' option.
The client can choose the file and save in his local directory.
The problem now is, if he cancels in between or at the initial stage itself an exception saying 'connection reset by peer' should be thrown at the server side.
When I execute the servlet in javawebserver2.0/weblogic 5.0, the exception is thrown.
Whereas when I use the same servlet in weblogic6.0sp1win no exception is thrown.
I want the exception to be thrown even in weblogic6.0sp1win.
How to overcome this problem. Please help me out at the earliest.
Please see the code below.
I am eagerly awaiting for your feedback. I have posted this query several times in java and jguru forum but did not get any reply till now.
Since the problem is very serious please help me out as soon as possible. thanks
luv,
venkat.
//code
import java.io.*;
import java.net.*;
import java.util.*;
import javax.servlet.*;
import javax.servlet.http.*;
import java.security.*;
public class TestServ extends HttpServlet //implements javax.jms.Connection
Exception exception;
public void doGet(HttpServletRequest req, HttpServletResponse res)throws ServletException, IOException, UnavailableException
int bytesRead=0;
int count=0;
byte[] buff=new byte[1];
OutputStream out=res.getOutputStream ();
// Set the output data's mime type
res.setContentType( "application/pdf");//application/pdf" ); // MIME type for pdf doc
// create an input stream from fileURL
String fileURL ="http://localhost:7001/soap.pdf";
// Content-disposition header - don't open in browser and
// set the "Save As..." filename.
// *There is reportedly a bug in IE4.0 which ignores this...
// PROXY_HOST and PROXY_PORT should be your proxy host and port
// that will let you go through the firewall without authentication.
// Otherwise set the system properties and use URLConnection.getInputStream().
BufferedInputStream bis = null;
BufferedOutputStream bos = null;
boolean download=false;
res.setHeader("Content-disposition", "attachment; filename="+"xml.pdf" );
try
URL url=new URL(fileURL);
bis = new BufferedInputStream(url.openStream());
bos = new BufferedOutputStream(out);
while(-1 != (bytesRead = bis.read(buff, 0, buff.length)))
try
bos.write(bytesRead);
bos.flush();
}//end of try for while loop
catch(SocketException e)
setError(e);
break;
catch(Exception e)
System.out.println("Exception in while of TestServlet is " +e.getMessage());
if(e != null)
System.out.println("File not downloaded properly");
setError(e);
break;
}//if ends
}//end of catch for while loop
}//while ends
Exception eError=getError();
if(eError!=null)
System.out.println("\n\n\n\nFile Not DownLoaded properly\n\n\n\n");
else if(bytesRead == -1)
System.out.println("\n\n\n\ndownload successful\n\n\n\n");
else
System.out.println("\n\n\n\ndownload not successful\n\n\n\n");
catch(MalformedURLException e)
System.out.println ( "Exception inside TestServlet is " +e.getMessage());
catch(IOException e)
System.out.println ( "IOException inside TestServlet is " +e.getMessage());
finally {
try
if (bis != null)
bis.close();
if (bos != null)
bos.close();
catch(Exception e)
System.out.println("here ="+e);
}//doPost ends
public void setError(Exception e)
exception=e;
System.out.println("\n\n\nException occurred is "+e+"\n\n\n");
public Exception getError()
return exception;
}//class endsMy idea is:
When user cancel the operation, browser send a message back but webserver/weblogic just ingnores it.
You check BufferOutputStream class or any other class that it extends to see if flush() method does really flushed, if not then it means that the operation has been cancelled. -
Dashboards help needed very urgently
hi experts
i have a page which displays like dril down table which has information of customers, beside the under that table i hve round diagrams which has business orinet things around that lot of object are there.
for example it looks
sun in the center and all the planets around it. if we click the particular planet it goes to the information page.
i need how to keep the driill down box for the customers and how to do for the remaining like sun and planets...
or the better way how we can keep
Thank youMy idea is:
When user cancel the operation, browser send a message back but webserver/weblogic just ingnores it.
You check BufferOutputStream class or any other class that it extends to see if flush() method does really flushed, if not then it means that the operation has been cancelled. -
Guyz!!! Help Needed Very Urgent.
I am not able to upload my cap file into jcop31 card using omni key reader,wat should i do?
What can be the problem.Please analyse.
/term "winscard:4|OMNIKEY CardMan 5x21 0"--Opening terminal
/card -a a000000003000000 -c com.ibm.jc.CardManagerresetCard with timeout: 0 (ms)
--Waiting for card...
ATR=3B 66 00 FF 4A 43 4F 50 33 30 ;f..JCOP30
ATR: T=0, N=-1, Hist="JCOP30"
=> 00 A4 04 00 08 A0 00 00 00 03 00 00 00 00 ..............
(96000 usec)
<= 6F 19 84 08 A0 00 00 00 03 00 00 00 A5 0D 9F 6E o..............n
06 40 51 30 85 30 1A 9F 65 01 FF 90 00 [email protected]....
Status: No Error
cm> set-key 255/1/DES-ECB/404142434445464748494a4b4c4d4e4f 255/2/DES-ECB/404142434445464748494a4b4c4d4e4f 255/3/DES-ECB/404142434445464748494a4b4c4d4e4f
cm> init-update 255
=> 80 50 00 00 08 F0 54 16 78 0C 04 84 90 00 .P....T.x.....
(127698 usec)
<= 00 00 61 12 00 70 38 90 95 59 FF 01 E8 34 68 A8 ..a..p8..Y...4h.
43 E9 74 6A 69 FC AA BF EA 0A 2C AC 90 00 C.tji.....,...
Status: No Error
cm> ext-auth plain
=> 84 82 00 00 10 C9 DE 7E 5D 82 10 1F 49 43 4D A5 .......~]...ICM.
E8 AD 76 46 A1 ..vF.
(71397 usec)
<= 90 00 ..
Status: No Error
cm> delete 010203040502
=> 80 E4 00 00 08 4F 06 01 02 03 04 05 02 00 .....O........
(70050 usec)
<= 6A 80 j.
Status: Wrong data
jcshell: Error code: 6a80 (Wrong data)
jcshell: Wrong response APDU: 6A80
Ignoring expected error
cm> delete 0102030405
=> 80 E4 00 00 07 4F 05 01 02 03 04 05 00 .....O.......
(67988 usec)
<= 6A 80 j.
Status: Wrong data
jcshell: Error code: 6a80 (Wrong data)
jcshell: Wrong response APDU: 6A80
Ignoring expected error
cm> upload -b 250 "D:\JAVA\ECLIPSEWTP322\workspace\handson_simple\bin\handson_simple\javacard\handson_simple.cap"
=> 80 E6 02 00 12 05 01 02 03 04 05 08 A0 00 00 00 ................
03 00 00 00 00 00 00 00 ........
(103546 usec)
<= 00 90 00 ...
Status: No Error
=> 80 E8 80 00 F0 C4 81 ED 01 00 1E DE CA FF ED 02 ................
02 04 00 01 05 01 02 03 04 05 0E 68 61 6E 64 73 ...........hands
6F 6E 5F 73 69 6D 70 6C 65 02 00 21 00 1E 00 21 on_simple..!...!
00 0A 00 0B 00 1E 00 0E 00 3D 00 0A 00 0B 00 00 .........=......
00 4D 01 CA 00 00 00 00 00 00 01 01 00 04 00 0B .M..............
01 02 01 07 A0 00 00 00 62 01 01 03 00 0A 01 06 ........b.......
01 02 03 04 05 02 00 08 06 00 0E 00 00 00 80 03 ................
00 FF 00 07 01 00 00 00 1C 07 00 3D 00 01 10 18 ...........=....
8C 00 05 7A 05 30 8F 00 06 3D 8C 00 02 18 1D 04 ...z.0...=......
41 18 1D 25 8B 00 04 7A 02 21 18 8B 00 03 60 03 A..%...z.!....`.
7A 19 8B 00 00 2D 1A 04 25 73 00 09 00 00 00 00 z....-..%s......
00 0F 11 6D 00 8D 00 01 7A 08 00 0A 00 00 00 00 ...m....z.......
00 00 00 00 00 00 05 00 1E 00 07 03 80 0A 01 06 ................
80 07 01 06 00 00 01 03 80 03 03 03 80 03 02 06 ................
80 03 00 01 00 02 00 09 00 0B 00 00 00 07 05 06 ................
04 0A 07 07 13 00 ......
(278665 usec)
<= 6A 80 j.
Status: Wrong data
jcshell: Error code: 6a80 (Wrong data)
jcshell: Wrong response APDU: 6A80
Unexpected error; aborting executioncm> /term "winscard:4|SCM Microsystems Inc. SCR33x USB Smart Card Reader 0"
--Opening terminal
/card -a a000000003000000 -c com.ibm.jc.CardManagerresetCard with timeout: 0 (ms)
--Waiting for card...
ATR=3B E6 00 FF 81 31 FE 45 4A 43 4F 50 33 30 07 ;....1.EJCOP30.
ATR: T=1, N=-1, IFSC=254, BWI=4/CWI=5, Hist="JCOP30"
=> 00 A4 04 00 08 A0 00 00 00 03 00 00 00 00 ..............
(81900 usec)
<= 6F 19 84 08 A0 00 00 00 03 00 00 00 A5 0D 9F 6E o..............n
06 40 51 22 83 30 13 9F 65 01 FF 90 00 .@Q".0..e....
Status: No Error
cm> set-key 255/1/DES-ECB/404142434445464748494a4b4c4d4e4f 255/2/DES-ECB/404142434445464748494a4b4c4d4e4f 255/3/DES-ECB/404142434445464748494a4b4c4d4e4f
cm> init-update 255
=> 80 50 00 00 08 0F F5 A8 43 45 FB 5F 81 00 .P......CE._..
(86324 usec)
<= 00 00 52 15 01 07 15 90 77 50 FF 01 82 F7 42 24 ..R.....wP....B$
95 18 B7 31 C6 47 6E 9D 94 5F D9 B1 90 00 ...1.Gn.._....
Status: No Error
cm> ext-auth plain
=> 84 82 00 00 10 EF 3C A2 00 C3 8A E0 AB 29 7C EA ......<......)|.
7B 28 95 D6 0A {(...
(56216 usec)
<= 90 00 ..
Status: No Error
cm> delete 010203040502
=> 80 E4 00 00 08 4F 06 01 02 03 04 05 02 00 .....O........
(325622 usec)
<= 00 90 00 ...
Status: No Error
cm> delete 0102030405
=> 80 E4 00 00 07 4F 05 01 02 03 04 05 00 .....O.......
(264622 usec)
<= 00 90 00 ...
Status: No Error
cm> upload -b 250 "C:\Documents and Settings\Administrator\workspace\training\bin\training\javacard\training.cap"
=> 80 E6 02 00 12 05 01 02 03 04 05 08 A0 00 00 00 ................
03 00 00 00 00 00 00 00 ........
(60562 usec)
<= 00 90 00 ...
Status: No Error
=> 80 E8 80 00 DD C4 81 DA 01 00 0F DE CA FF ED 01 ................
02 04 00 01 05 01 02 03 04 05 02 00 1F 00 0F 00 ................
1F 00 0A 00 0B 00 1E 00 0C 00 3D 00 0A 00 0B 00 ..........=.....
00 00 4D 00 00 00 00 00 00 01 01 00 04 00 0B 01 ..M.............
00 01 07 A0 00 00 00 62 01 01 03 00 0A 01 06 01 .......b........
02 03 04 05 02 00 08 06 00 0C 00 80 03 00 FF 00 ................
07 01 00 00 00 1C 07 00 3D 00 01 10 18 8C 00 02 ........=.......
7A 05 30 8F 00 06 3D 8C 00 04 18 1D 04 41 18 1D z.0...=......A..
25 8B 00 03 7A 02 21 18 8B 00 01 60 03 7A 19 8B %...z.!....`.z..
00 00 2D 1A 04 25 73 00 09 00 00 00 00 00 0F 11 ..-..%s.........
6D 00 8D 00 05 7A 08 00 0A 00 00 00 00 00 00 00 m....z..........
00 00 00 05 00 1E 00 07 03 80 0A 01 03 80 03 03 ................
06 80 03 00 03 80 03 02 06 00 00 01 06 80 07 01 ................
01 00 00 00 09 00 0B 00 00 00 07 05 06 04 0A 07 ................
07 13 00 ...
(547331 usec)
<= 00 90 00 ...
Status: No Error
Load report:
221 bytes loaded in 0.5 seconds
effective code size on card:
+ package AID 5
+ applet AIDs 13
+ classes 15
+ methods 64
+ statics 0
+ exports 0
overall 97 bytes
cm> install -i 010203040502 -q C9#() 0102030405 010203040502
=> 80 E6 0C 00 1A 05 01 02 03 04 05 06 01 02 03 04 ................
05 02 06 01 02 03 04 05 02 01 00 02 C9 00 00 00 ................
(127417 usec)
<= 00 90 00 ...
Status: No Error
cm> card-info
=> 80 F2 80 00 02 4F 00 00 .....O..
(41639 usec)
<= 08 A0 00 00 00 03 00 00 00 07 9E 90 00 .............
Status: No Error
=> 80 F2 40 00 02 4F 00 00 [email protected]..
(51116 usec)
<= 06 A0 00 00 00 00 02 07 00 06 01 02 03 04 05 02 ................
07 00 90 00 ....
Status: No Error
=> 80 F2 10 00 02 4F 00 00 .....O..
(27798 usec)
<= 6A 86 j.
Status: Incorrect parameters (P1,P2)
=> 80 F2 20 00 02 4F 00 00 .. ..O..
(116801 usec)
<= 07 A0 00 00 00 62 00 01 01 00 07 A0 00 00 00 62 .....b.........b
01 01 01 00 07 A0 00 00 00 62 01 02 01 00 07 A0 .........b......
00 00 00 62 02 01 01 00 07 A0 00 00 00 03 00 00 ...b............
01 00 06 A0 00 00 00 00 01 01 00 05 01 02 03 04 ................
05 01 00 90 00 .....
Status: No Error
Card Manager AID : A000000003000000
Card Manager state : INITIALIZED
Application: SELECTABLE (--------) A00000000002
Application: SELECTABLE (--------) 010203040502
Load File : LOADED (--------) A0000000620001 (java.lang)
Load File : LOADED (--------) A0000000620101 (javacard.framework)
Load File : LOADED (--------) A0000000620102 (javacard.security)
Load File : LOADED (--------) A0000000620201 (javacardx.crypto)
Load File : LOADED (--------) A0000000030000 (visa.openplatform)
Load File : LOADED (--------) A00000000001
Load File : LOADED (--------) 0102030405
{code}
I use your code, and upload OK. -
Weblogic application module exception(need very urgent)
hi when i try to deploy application im getting the following error,application status shows as failed
<BEA-149265> <Failure occurred in the execution of deployment request with ID '1295628973050' for task '8
4'. Error is: 'weblogic.application.ModuleException: '
weblogic.application.ModuleException:
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1373)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:468)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:204)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:60)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:117)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:204)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:60)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:635)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:16)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:162)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:140)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:106)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:820)
at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1227)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:436)
at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:163)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:18
1)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:12)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:67)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
java.lang.NullPointerExceptionYou have a java.lang.NullPointerException when you are trying to start the application contexts in the application lifecycle startup. I would open a case with support as the stack trace you sent didn't really provide any additional obvious clues to me.
-
Realignment table cannot be activated - help needed - Very urgent
Hi All,
Iam new to SCM and in the process of learning it. Iam trying to work with the realignment transaction /sapapo/rlgcopy. When i try to create a table , after characteristics selection it gives error "Realignment table cannot be activated". How do i proceed from there. Please help.
It would be helpful if somebody could send a link that explains realignment steps in detail. I tried help.sap.com , but could not understand clearly. Kindly helpHi...
As mentioned earliar reply...
Hope you are having Authorization of realianment transaction...
Transaction
/SAPAPO/RLGCOPY - Data Realignment
Check that you have selected Realianment button
entered the planning object structure name
You have created table/change table
selected char to be ralianed
and then maintained entries -
MSI MS 7100 K8N Neo 4 Diamond need bios configuration help very urgent
Hello every body i need very urgent help,
i need help on above mainboard bios conf. i will attach two seperate hdd (120 GB sata II) and i will setup W2003 standart 32bit ed.
if possible i won't use any raid configurations, but i need speed
how should i conf. bios and which controller shouşd i use silicon or nvidia or how and wich has to be used.
corecction about my configuration
Mainboard MSI MS 7100 K8N Neo 4 Diamond (NF4 SLI,GLAN,SATA)
CPU AMD Athlon 64 X2 3800+ (2.0GHz,1024K Cache,S939) BOX
Ram CORSAIR Value Select DDR400 1024MB Kit (2x512MB)
Hdd SAMSUNG 120GB 7200RPM 8MB SATAII (2x120GB)
Graphic Card SAPPHIRE 256MB ATI Radeon X1600 PRO (PCI-E) AVIVO
Case ENLIGHT 7247 400WHello !!
The Bios configuration depends on many factors.....but we do not know anything about your configuration. ( CPU, RAM, Powersupply.....)
If you need HDD Speed, RAID 0 will be a good Option and you should consider it.
Both Controllers, Silicon Image & nvidia, have the same speed. But i think you can not attach Optical drives to the Silicon Image Controller. ( if someone has other experiance please post )
Good Luck
Greetz MurdoK -
CAN ANY BODY EXPLAIN THESE QUESTIONS, VERY URGENT
WHAT IS THE USE OF CHAPTER ID, IN CHAPTER ID RATES WILL BE DETERMINES.
HOW MANY TAX CODES NEED CST, LST.
WHERE CAN I SEE EXCISE REGISTER
WHAT IS MEANT BY RG1 CAN ANY BODY EXPLAIN BRIEFLY, WHAT IS THE USE OF RG1
HOW DO I GET OPENING BALANCE FOR EVERY MONTH.
IN DEPOT SALES, IF CREATING EXCISE INVOICE A CERTIFICATED WILL ISSUE, IN A CERTIFICATE WHICH FIELDS WILL BE THERE.
WHAT IS MEANT BY JURISDICTION CODE & COUNTY CODE.
IN SD FACTORY SALES WHICH A/C ENTERIES GENERATED.
CAN ANY BODY EXPLAIN THESE FORMS, WHICH SITUATION THESE FORMS WE ARE USING. I NEED VERY URGENT.
a) A form
b) D form
c) C form
d) H form
e) DDP form
f) TR6 form
g) D3 form.
H) ARE.
I) ARE 1
j) ARE 2
IN DEPOT SALES PRICING PROCEDURE JFACT, WHICH CONDITION TYPES WILL COME,
IN FACTORY SALES PRICING PROCEDURE JFACT, WHICH CONDITION TYPES WILL COME
NOW WHAT IS THE VAT TAX.
what is the use of common distribution channel and common divisions
PLS FORWARD ANSWERS TO THIS MAIL ID.
i hope that definitely people will help
thanks every body.Dear vara prasad
You can take it for granted if you post so much questions in one thread like this, nobody will answer / clarify you.
So please make one thread per question.
Meanwhile, just I would like to clarify for few questions
1) The most important feature of chapter id is that based on this chapter id which you maintain in "Excise Tax Rate", all your excise tax rates will be flowing into your sale order / billing
2) If the rate of tax differs, then you need to maintain a separate tax code. For example, the LST / VAT in some state is 4%, and in some state it is 12%. So in this case, you need to maintain two tax codes
thanks
G. Lakshmipathi -
Hi,
I have issue with select statement to pull the records from two tables. Here I have two tables one is with Billing Document Items and Service Order Operations.
I have service order as unique field in both tables, When I execute select statement with one service order I got 10 records like
S Ord Oper Billing Document Items
Oper Repair Code Item Oper Repair Code
10 AD01 1 10 AD01
20 AD01 2 20 AD01
30 OT01 3 10 AD01
40 RE01 4 20 AD01
50 RP01 5 20 AD01
6 20 AD01
7 30 OT01
8 40 RE01
9 50 RP01
10 50 RP01
This are the records with same Service order number, and my select statement giving data like
O/P
Service Order = 60001212
OPER ITEM REPAIR TYPE
10 1 AD01
20 1 AD01
10 2 AD01
20 2 AD01
10 3 AD01
20 3 AD01
10 4 AD01
20 4 AD01
10 5 AD01
20 5 AD01
10 6 AD01
20 6 AD01
30 7 OT01
40 8 RE01
50 9 RP01
50 10 RP01
But I need output like this
Item Oper Rep Code
1 10 AD01
2 20 AD01
3 10 AD01
4 20 AD01
5 20 AD01
6 20 AD01
7 30 AD01
8 40 RE01
9 50 RP01
10 50 RP01
Please give me the select statement which gives the above output. I need very urgent please....
Thanks
Robbiehi robert,
The ouput u want is just a little away from the one u r actually getting. it is the two fields OPER and ITEM interchangeably..
U just have to use GROUP BY ITEM..........if u want the desired output with ITEM as first field.
<group-by-clause> → GROUP BY [<column-ref>,*]<column-ref>
if it helps please reward points.
thanks -
Very very urgent. population data from database into dropdownbox
Hi,
i imported a model through ejbs
this is to create new entries into database ,
and my scenerio iso now i need to populate the values that i stored into database thro EJBS in a drop down box of wd application.
plz help me through code ,i am new to java webdynpro...
neede very urgently,
Thanx .
Arjun.G
Message was edited by:
arjun swamyHi,
Have a look at these threads
Dropdown by index in table - fetching values from database
Dropdown by index
Kind Regards,
Saravanan K -
Need help, MMC tree got deleted, very urgent.
Hi,
My sap MMC tree, got deleted in the server. I have been trying to restore since 2 days and couldnt succeed, please help me.
1) i have uncared the sapmmc.sar from Kernal\NT\I386\MMC\sapmmc.sar file
2) i got about 7 files, in which there is one sapmmc file i have tried to double click it, n check but no go.
3) i also tried to run the Sapstartsrv.exe file and fill in up the values in pop up window. & filled up the following values :-
SID: DEV
NR: 00
StartProfile: (entire start profile path given)
user: devadm
passwd; (given)
- but it says "the account name is invalid or does not exist or the password is invalid for account name specified"/
- no go in both the cases.
Please need help very urgent.
Regards,
Satish.siva,
I am getting same error since 2 days
SID: DEV
NR: 00
Start Profile: (entire start profile path)
User: <hostname>/devadm
passwd: ****
Error:
cannot install service
create service failed:421
The account name is invalid or doesnot exist, or the passwd is invalid for the account name specified.
Edited by: satish c on Jun 4, 2008 11:12 AM
Maybe you are looking for
-
ITunes Update for Windows Vista 64 bit
Does anybody know when this is going to be released. I got an iPhone and can't sync it with the latest version of Windows Vista. The friendly staff at AT&T forgot to tell me that I would not be able to use my iPhone until iTunes came out with an upda
-
My itunes password will not work on my iphone. The samecpassword works on my ipad and computer, what can I do?
-
BP interaction history does not show all the activities in portal
Hi Experts, We have a problem in application CRMM_ACCOUNT when we go to BP interaction history does not show all the activities in portal as it is thr in activities screen. Regards, Mark
-
hi, i have requirement wherein i must have logs generated for each 100 Mb but the rollover must not happen based on teh index. it must happen every 6 hours. so the logs must be generated as , logging.log logging.log.1 logging.log.2 logging.log.3 logg
-
Hi everybody, Does anybody have a document to be followed to config the General Ledger module. I would like to get something instead of following the SAP Help. Thanks to all.