Needed help : "Error 4 in update"
HI GUYS,
i'm loading data into standard cube(0rt_c01) using info source 2lis_03_BF(material movemnts).
while loading i got the following error
"No SID found for value 'PC ' of characteristic 0BASE_UOM "
"error 4 in update".
any help would be appreciated.
thanx in advance
with regards,
Loknath
hi,
check if in infopackage tab Update you have selected option Do not update data if no MD exist for characteristic.
If yes and you did not have value PC for 0base_uom that caused a problem.
Now you can either:
-load MD for char. 0base_uom
-select always update the data, even if no master data exists in infopackage
Regards,
Andrzej
Similar Messages
-
Need help - Error while updating the firmware of Muvo Slim using the recovery t
Hi ,
While I am trying to update my Muvo slim firmware using the recovery tool it throwd up an error. And from then onwards if I am trying to power it up it won't.
If I again try to update the firmware, it throws up the error that "Unable to Write to Device: Device Time out".
I am afraid that my Muvo slim got bricked. Can you please help me in recovering the same.
PS: My PC OS is Windows XP.
Thank & Regards
ksraghava?On my XP system, the last time I wanted to reload the firmware, I had to remove all of my Creative software programs,?and then revert my Windows Media Player back to 0 and then use The Recovery Tool. It is a bit of a pain, but does seem to work when you are getting errors with the firmware download.
luvmyrescuedogs
Almost forgot. Make sure your player is fully charged or has a fresh battery before starting any firmware download.
Message Edited by luvmyrescuedogs on 06-4-2008 :6 AM -
I need help! I updated the new 6.1.3 last night. Since that time my phone will not charge. The phone is plugged in and shows as charging but the battery still drains. What can I do? I need help!
Restore iPhone with iTunes on your computer.
-
new update on my iTunes 8.2 computer. Sync my iPads on the computer missing playlist on my computer ??? Need help. Worst update ever
Hello there, dancingteacher.
Removing and re-installing iTunes can be a challenging endeavor and has to be done in a very particular way. The following Knowledge Base article provides a clear, step-by-step process of removing iTunes:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
The "Additional Troubleshooting" section also includes a link to updates and conflicts with software for your Windows Operating System as well.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
please i really need help!
I had the same problem on my Mac Pro, iPad, Macbook Pro. Could not load iTunes, App Store or any support community. Called Apple Care and she asked if I had rebooted my router in awhile. I had not. Each of these would load half way and then just stop. She said iTunes and App Store could be stopped as they are different than my Discover or e-Bay accounts, which were fine. So during the 75 min call I pulled the power cord of the Netgear Wi Fi router, let it sit for 2 or 3 min and then replugged the power adapter. In about 4 to 5 min the sites started to load, although not displayed correctly. After quitting and re-starting the apps in question they are working fine again. But this has happened twice now in a 6 hour time period. So give it a try, but also give it a couple of tries.
-
ADOBE I NEED HELP! - Cannot Update Suite
Well it has been a fun day! I am having an issue and I originally posted my problem in the Creative Suite - Windows forum and gave it a few days and the one reply I received did not solve my issue. So I decided I would have to contact Adobe Support. I first went to online chat which I prefer and spoke with someone. I was quickly told that they could not solve my issue and I would need to speak to a "product expert" and gave me the Adobe 800 Support Number. I then called and was told there would be a 2 hour wait! The system said it would call me back, which it did. I spoke with a man who said he would transfer me to the correct department. After being on hold for 10 - 20 minutes another man answered and I again explained my problem. He needed to research the issue. After another 10 minute hold I was told that another department handles these issues and I would be transferred again. As I write this I have been on hold going on 90 minutes with no answer. I had to hang up as I have other calls and work that must be taken care of today! Adobe your support is some of the WORST I have ever seen from a company of your size! There have been a few exceptions and I will say that in general the support provided here on the forums is excellent. This is the reason I now turn to this forum. I know that there are several Adobe employees that reply on this forum regularly and hopefully if someone cannot help me solve my issue the Adobe Employees can help me cut the crap and get to someone who can help.
Here is my issue:
I am attempting to check for updates using the Adobe Application Manager on Windows 8 and I get this error:
The update server is not responding. The server might be offline temporarily, or the Internet or firewall settings may be incorrect.
I have seen this error before on Windows 7 and remembered that I needed to disable the Microsoft Virtual WiFi Miniport Adapter. I navigated to the correct place but the Miniport Adapter was not there. After a bit of searching across several forums I saw a recommendation to change <logLevel>2</logLevel> to <logLevel>10</logLevel>. I attempted that and again it still did not work. I have also tried disabling my anti-virus protection and disabling Windows Firewall. Neither worked.
I am not sure what else to try or do at this point.
Are there any other recommendations to solve this issue?
Note: I am running Windows 8 Pro using the Creative Cloud Version of CS6 and I check for updates by going Help > Updates via any Adobe program.
PLEASE HELP!Hi Lynda
Sorry to hear that you are facing this problem with updater. As you have already created the log file using log level 10. Could you please send me the updater log file at [email protected] from following location so that I can debug this issue .
Log file loction
- Vista/Win7: <%localappdata%>\Adobe\AAMUpdater\1.
- Win XP: <User>\Local Settings\Application Data\Adobe\AAMUpdater\1.0
- Mac: ~/Library/Application Support/Adobe/AAMUpdater/1.0
Please zip the complete 1.0 folder and send it across.
Thanks,
Vikas Talwar -
Need help - Error: MDN is not found (code: 33)
Whenever I open my Verizon Cloud it says "Error: MDN is not found (code: 33). I NEED HELP! This phone has to be sent back soon becuase I got a replacment. HELP HELP HELP
I have a galaxy s3
Subject line edited into post.
Message was edited by: Admin ModeratorMake sure both phones (iPhone, Moto X, Droid X, Samsung Galaxy, Nokia, Motorola) are connected to the same wifi .. on the new device you will first have to download and install the updates by going to Settings >> About Device >> Updates. Once the updates have been installed you will not receive the error "MDN is not found (code: 33). You can proceed to pair the devices and transfer your content. It will also give the option to select the type of content (contacts, photos, video) you want to transfer.
Thanks www.strongpurpose.com for helping find this solution .. they made it easy for me to get my content transferred so I can get back to the important stuff .. Follow Your Passion! -
Trying to create a Invoice based on Order need help Error -5002
the dreaded -5002 error is haunting me too! and I could not find a matching solution for this in the forum....
I need help quickly on this. I am trying to create invoices for some orders so the Base - Target relationship is retained. The orders I pick are all Open (DocStatus = O and the lines are all Open LineStatus = O)
here is my code
oInvoice.Lines.BaseEntry = 48
oInvoice.Lines.BaseLine = 0
oInvoice.Lines.BaseType = SAPbobsCOM.BoObjectTypes.oOrders
oInvoice.Lines.ItemCode = "A00001"
oInvoice.Lines.ItemDescription = "IBM Infoprint 1312"
'adding Line
oInvoice.Lines.Add
oInvoice.Lines.BaseEntry = 48
oInvoice.Lines.BaseLine = 1
oInvoice.Lines.BaseType = SAPbobsCOM.BoObjectTypes.oOrders
oInvoice.Lines.ItemCode = "A00002"
oInvoice.Lines.ItemDescription = "IBM Inforprint 1222"
'adding Line
oInvoice.Lines.Add
lRetCode = oInvoice.Add
If lRetCode <> 0 Then
gObjCompany.GetLastError lErrCode, sErrMsg
MsgBox (lErrCode & " " & sErrMsg)
End IfIndika,
Only set your base types...
(not items & description)
oInvoice.Lines.BaseEntry = 48
oInvoice.Lines.BaseLine = 0
oInvoice.Lines.BaseType = SAPbobsCOM.BoObjectTypes.oOrders
oInvoice.Lines.ItemCode = "A00001"
oInvoice.Lines.ItemDescription = "IBM Infoprint 1312"
'adding Line (to fill the second item line)
' the 1st line item is there by default
oInvoice.Lines.Add
oInvoice.Lines.BaseEntry = 48
oInvoice.Lines.BaseLine = 1
oInvoice.Lines.BaseType = SAPbobsCOM.BoObjectTypes.oOrders
oInvoice.Lines.ItemCode = "A00002"
oInvoice.Lines.ItemDescription = "IBM Inforprint 1222"
'DO NOT Add THIS line
' (only if you want to add a 3rd line item)
'''oInvoice.Lines.Add -> Don't add this
lRetCode = oInvoice.Add
If lRetCode <> 0 Then
gObjCompany.GetLastError lErrCode, sErrMsg
MsgBox (lErrCode & " " & sErrMsg)
End If
remember to add :
oInvoice.CardCode = "your BP"
oInvoice.DocDueDate = Now
oInvoiceDoc.CardCode = txtDOCBPCode.Text -
I need help, I cant updat my blackberry curve 8520
I nee d help, I cant updat my blackberry curve 8520 everytime i go here in blackberry site and check for update my phone it says try again.. and no updates for your software, how is that? I have v4.6 please help meee
You do, for sure, have your BB data plan active and are able to get email, etc.?
That is required for updating to OS 5.0.
If the OS you downloaded is not specifically for the carrier that is branded on the device you will need to install the OS to the computer and then when you're done, delete the vendor.xml file located in c:\program files\common files\research in motion\apploader.
Then after you delete that, in that same apploader folder, is a file called Loader.exe. Double click that to install the OS to your device.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you! -
Windows 8.1 need help with Windows Updates and Start menu Or fix my old Windows Xp system
My beloved windows Xp has gave up after many years of working well. It stopped working a few days ago after a lightening strike.
I got this Windows 8.1 computer a few month ago but it seems to have a problem. I stopped using it after could not get start menu to work and when back to my Windows XP system.
First problem is the start menu is not there. I tried installing something and it says it will take control or something and screen goes black. I clicked canceled quickly in order not to get a virus.
Where is the start menu?
Second problem, Windows updates does not want to update because it needs Windows 8.1 update. This computer is already Windows 8.1. There I canceled it since it was mostly a virus. Now updates are not working.
If those can not be fixed, how can i fix my Windows Xp to get it back. It does not turn on, I press button and nothing happens. Is this something easy to fix?Another user discovers that Windows 8.1 is not at all of what it should be.
There is no Start Menu in Windows 8 or 8.1. However, you can restore your desktop start menu with a very good freeware application:
Classic Shell
Windows Update comes with Windows 8.1. There is nothing special you have to do.
It kind of sounds like you've been a bit too quick to download and run whatever you find on the Internet. You should always research any software you're considering downloading/installing ahead of time. Google it. See what others say
about it. Ask on forums. In order to use Windows effectively and safely you need to expand your knowledge and become a more sophisticated user.
If you think your new system has become infected, you might want to consider Refreshing or Resetting it to a clean state, or at least visiting one of the anti-malware forums and getting some advice on cleaning it up. But beware, a lot
of "blind leading the blind" happens on forums. Always try to read between the lines, and question what people say.
You could consider leaving XP behind. Its time has come and gone, and pretty much any newer version of Windows can actually give you better service than XP - once you get it tuned up.
It's possible to make Windows 8.1 more functional than XP and about as functional as Windows 7, but it takes a fair bit of effort in reconfiguration and installation of some well-known 3rd party applications that are good (which, unfortunately, most
on the internet are not).
Good luck to you.
-Noel
Detailed how-to in my eBooks:
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options -
"Setup is unable to detect a supported product on your system. Please ensure that your product is properlly installed before running setup program"
After i installed the Driver from the Product CD & Played normal with it for two weeks now, i asked myself if their is an update available for my SoundCard, Maybe the sound can improve and i can get clearer and more intense sound when i am playing game. However when i downloaded the file named "SBA2_PCDrvBeta_LB_2_08_0002" to install, i got the error message specified above ... My soundcard is a " Creative SoundBlaster Audigy Value" ... So this Beta update for Gamers should work perfectly, but it does not ... So i decided to try the other updates for my soundcard on the site ... and their was many, however non of them worked and as a result i recieved the same error message specified above in the begining of this Thread ...
Please Help Me Out Here ... I Feel That These Updates Will Enhance My Soundcard performance and i really need that enhancement ... especially for online first person shooter games ... I Also got 5. Sorround Sound Zalman Headphones, i got them for $85 Australian...You might find some useful advice here and here. HTH
-
Hi Buddies, my mobo (760GM-P23 (FX)) is working with an Athlon II X3 455, Kingston HyperX KHX1333C9D3B1K2/4G Dual Kit and with just on-board graphic. MSI Live Update shows the bios H.20 as my board's and H.A0 as upgrade version. Is this information correct?
I'm an inexperienced pc user. Is there any software which installs the bios update through windows' interface?
I'm using "Core Temp" software as processor heat controller. Any other advice which shows also the mobo's temperature?
Thanks in advance..Quote from: motan on 22-October-12, 19:58:19
Thanks for help. How do I understand that the mobo needs a bios update?
if you have no issues, then leave bios update alone
Quote from: motan on 22-October-12, 20:04:47
Thanks for help. I tried to use it. Interestingly Control Center and Live Update are not working together. Just ones is working if I install it before than other. Second gives error as "Driver can't load".
Control Center need admin permissions to runs properly. -
Hi,
I have a data in the table like below
Before:
ID SEQ_ID Manager_id Reg_days
1 1 111 1
1 2 222 3
1 3 333 5
1 4 444 7
1 5 555 9
Action: User deletes SEQ_ID #3
After:
ID SEQ_ID Manager_id Reg_days
1 1 111 1
1 2 222 3
1 3 444 7
1 4 555 9
could you please help me the query to update the table how what was seq_id #4 becomes seq_id #3 and what was seq_id #5 becomes seq_id #4; i.e. every sequence number > the one deleted is decremented by one so that the sequence numbers remain contiguous.
Thx in advance[Edit: why do you never mark any of your questions as "answered"? Providing feedback is a courtesy that encourages people to answer.]
user586 wrote:
Is it possible to update it to write in a procedure or trigger to call the procedure in the code. Plz. let me know or help me.I thought you said you wanted to do this every 3 or 6 months? In that case no trigger!
Do not try to do this in a trigger!
Test data:drop table T;
create table T(id, SEQ_ID, MANAGER_ID, REG_DAYS) as
with IDS as (
select level id from DUAL connect by level <= 10
), REST as (
select level seq_ID, level+100 MANAGER_ID, level*2 - 1 REG_DAYS
from DUAL
connect by level <= 10
select * from IDS, REST;
delete from T where SEQ_ID = 3;
commit;
select * from T where id = 1;
ID SEQ_ID MANAGER_ID REG_DAYS
1 1 101 1
1 2 102 3
1 4 104 7
1 5 105 9
1 6 106 11
1 7 107 13
1 8 108 15
1 9 109 17
1 10 110 19Solution:merge into T
using (
select new_seq_id, rid from (
select SEQ_ID,
ROW_NUMBER() over(partition by id order by SEQ_ID) NEW_SEQ_ID,
rowid RID
from T
where NEW_SEQ_ID != SEQ_ID
) NEW_T
on (T.rowid = NEW_T.RID)
when matched then update set seq_id = new_t.new_seq_id;
70 rows merged.
select * from T where id = 1;
ID SEQ_ID MANAGER_ID REG_DAYS
1 1 101 1
1 2 102 3
1 3 104 7
1 4 105 9
1 5 106 11
1 6 107 13
1 7 108 15
1 8 109 17
1 9 110 19Most importantly, if you run the MERGE twice in a row, the second time you get "0 rows merged." The code only changes the rows that need to be changed.
Edited by: Stew Ashton on Oct 29, 2012 9:15 AM -
URGENT need help ERROR 0xc0000034
Hello,
Lastnight my laptop was updating the windows updates and this morning when I tried turning it back on I got a blue screen with the message Error code 0xc0000034
I've read some in the forums and appareantly I need a recovery media or a windows 8 CD and I dont have any of those
My laptop model is Satellite E45-B4200. I bought the laptop around july so is almost new.
Please reply i am desesperate
Solved!
Go to Solution.Satellite E45-B4200
According to Microsoft, trying and failing to boot several times will eventually take you to the recovery environment instead. According to Toshiba, you can also get there by pressing F2 or the zero key on powering up.
If you have completely shut down, Toshiba says you can get there using F12 to reach the UEFI boot menu and then selecting HDD Recovery. .
Please try these out many, many times and let us know when you succeed. It looks like this.
If you had created the recovery media on p. 45 of the User's Guide, we could use that.
Satellite/Satellite Pro E40-B Series User’s Guide
-Jerry -
I upgraded to CS5 recently. I started getting no
tices there were updates available. When I got to the update
page and clicked on update, I got a message that said 'another
instance of updater is running, please try again later". This has
happened each time I tried to run the updates. It has been going
on for days. I am at a loss as to what this means and how I go about
getting the updates. Any suggestions? I am not a computer or photoshop
whiz, so I need basic help.That did it - thanks for your help
Jim R
Maybe you are looking for
-
A cerca de 1 ano adquiri um Iphone 4 e um Ipad 1, durante cerca de 8 meses comprei mais de 300 dolares de aplicativos na Apple Store. Ocorre que vendi este Iphone e o Ipad em questao, mas mesmo aswsim tive o cuidado de desinstalar os aplicativos para
-
Has anyone had an issue with apple tvs producing sound but no picture over apple tv's? I have tried 10 other devices thru my reciever and all work just fine over hdmi. But both of my apple tv's do not. Any Ideas? I can give details but in a nutshell
-
Hello All, How to find out the view cluster associated with a view ?
-
Pictures Fuzzy/Cloudy/Foggy in Day Light
I have been having a problem lately with the quality of photos in a bright lit situation such as out doors. This only happens when i am in a bright sunny area. I have checked and cleaned my lens numerous times and this is not the issue. It only seems
-
I have trouble syncing my exchange calendar and contacts on my mac. Can anyone help please?
I have trouble syncing my exchange calendar and contacts on my mac. They will initially load up but will not sync back and forth and stay up to date. Can anyone help please?