Needs the table from which "project definition" field is to be extracted

Hi,
As a requirement in BW, we have to add the new field project definition in the BW cube 0COOM_C02(description of the cube:- CO-OM: Costs and Allocations Project (Delta Extraction)).For this, we have to add the same in all the data sources related to this cube.
Data sources under this cube are:
0CO_OM_CCA_9 (Cost Centers: Actual Costs Through Delta Extraction)
Take any one of the data source and search that in the R/3 side tcode RSA6, double click and you will find the entire structure (fields) for that data source.Double click the extract structure appearing above it to find the technical details of each field.
Now we have to add the field project definition in the data source.For extracting the same, we have to write the logic which will extract the value of project field from a table.
We dont have any problem in writing the code but
Our requirement is that during coding, from which table we should extract the value ? and also on what basis?(means what should be the selecting criteria for populating that field) .
If you want any information on these data sources, do reply me.
Thanking you in advance,
Tarun Brijwani.

The cube is related to module
Financials Management & Controlling----->Controlling----->Overhead Cost Controlling

Similar Messages

  • How to find the Table from which a Custom table is created.

    Hi Gurus,
    I have a custom table in SAP and want to figure how that has been created. How can I do that?
    Regards
    Prashant

    Hello Prashant,
    what do you mean by "how"?
    When you say custom table do you mean "Customization table" or a "Customer table" (in namespace Z... or Y...)
    Anyway, you can access SE11 transaction, view the table and then check its attributes.

  • Table from which all requests details report can be extracted

    Hi to all
    I would like to know from which table we can have a look on all request details which are in quality but not in production
    i want move prd data to quality if i does this all request are getting vanish in quality
    Regards

    Hi,
    I guess you mean transport request. I don't think that such table exists. If you're on quality and you're able to see requests that were imported in production then most probably these data are read with some FM from production system.
    Normaly you can see transport requests in tables E070, E071 and so on, but these refer to current system, not a remote one.
    Best regards
    Marcin Cholewczuk

  • How to find out the table from the field.

    Hi Friends,
    I want to know the table name from the field.
    I mean i know the field with which i want to know the table. I tried but could find the structure only but how can i find the table.
    Please guide me.
    siva.

    Hi Sivakumar,
    Using DD03L (in SE16, SQVI) you can list the tables & structures which contain the desired field.
    (If it's a very common field [e.g. MATNR] you'll get a huge amount of hits...you can also use 'F1' + 'Technical information' [in the transacton you are] to get information on table & field as mentioned before)
    http://www.erpgenie.com/abap/tables.htm
    BR
    Csaba

  • I NEED THE TABLE NAME FOR THE  FIELD DESCRIPTION GIVEN!

    I NEED THE TABLE NAME FOR THE  FIELD DESCRIPTION GIVEN!
    Partner Type
    Partner Type Desc
    Partner no
    Partner Name
    Partner Address 1
    Partner Address 2
    Partner Address 3
    Partner Address 4

    Hi Jyotirmoy ,
                        You can get all partners and their type in table EDPP1, depending of the partner type you need to go to specific table for address and other details, like for partner type KU(customer) goto KNA1,etc for partner type LI(vendor) goto LFA1 etc for partner type B(bank) goto BNKA etc ....
    Sirish

  • My previous laptop has broken and I want to copy my tunes from my ipod classic to me new laptop, how do I do that, each guide I've read refers to needing the old laptop which isn't an option?

    My previous laptop has broken and I want to copy my tunes from my ipod classic to me new laptop, how do I do that, each guide I've read refers to needing the old laptop which isn't an option?

    You are not going to be able to recover the music from your iPod to you new laptop.
    It doesn't work that way. It only move music from you iOS device to your computer.
    You can download what you purchased from Apple. Anything else is lost.
    Hence the reason we are always harping on backups.
    Allan

  • Load the data for which these 2 fields are not initial (Blank).

    Hi Experts,
    I am extracting data from R/3 to BW using a Z data source based on view.
    In the extract there will be 2 fields User ID & Date.
    My requirement is to load the data for which these 2 fields are not initial (Blank).
    My Data source is extracting all the data from R/3 to BW.How can filter it out in BW.
    Thanks

    Hi Siegfried,
    Thanks for the info Provided.
    As I am new to BW, Could you please provide me with the code (ABAP) I need to insert and where...in which part of the below start routine in need to insert the code....
    My requirement is to load the data for which the USER ID (ZUSR_ID) & DATE (ZDATE) is not null/blank/0.
    <b>Start Routine IN Transfer Rules</b>
    Global code used by conversion rules
    $$ begin of global - insert your declaration only below this line  -
    TABLES: ...
    DATA:   ...
    $$ end of global - insert your declaration only before this line   -
    FORM STARTROUTINE
      USING    G_S_MINFO TYPE RSSM_S_MINFO
      CHANGING DATAPAK type TAB_TRANSTRU
               G_T_ERRORLOG TYPE rssm_t_errorlog_int
               ABORT LIKE SY-SUBRC. "set ABORT <> 0 to cancel datapackage
    $$ begin of routine - insert your code only below this line        -
    DATA: l_s_datapak_line type TRANSFER_STRUCTURE,
          l_s_errorlog TYPE rssm_s_errorlog_int.
    abort <> 0 means skip whole data package !!!
      ABORT = 0.
    $$ end of routine - insert your code only before this line         -
    ENDFORM.
    Thanks for the help.

  • Issue in CJ20N tcode for project definition field

    Hi guys,
    After the project definition is created in the system, I have executed the transaction code and when I clicked on change icon(toggle button which is available in the application toolbar) the project definition field is in edit mode. This should not happen at all.
    Kindly let me know your findings on this.
    Thanks & Regards,
    Rg

    Hi,
    For project defination internal number is assigned by system.
    When you saves's project then system allocate one number to project defination, you can view it,
    SE11 >>> table  PROJ >> Click on contents >>> execute,
    here you will get your project defination & number is assigned to project defination.
    kapil

  • I need the dialog box (which contains page selection etC) HOW TO MAKE IT?

    hi
    i have done an requirement in smartforms.
    i need the dialog box (which contains output device name, page selection etc) when i take the print (smartforms).
    And now i already can see a dialog box .but still it doesn't have the page selection.
    I mean if the smartforms which have 5 pages,and what i need is just print the page 1 and page 3 . so I need the page selection
    which can help me on this issue. 
    Would anyone know something about it  and give me some advice . I will be appericate it.

    Hi,
    Just check with the control parameters of the function module, if you have changed any of it.
    If you have changed it then try to give the no-dialog field of the control parameter table as space.
    If the dialog box which gives you the Output device name and others appears then just below the output device name you have the column for the page selection.Just pass the values of the pages separating them with comma(like 2, 5 will print second and fifth pages) and it prints only those pages.
    Regards
    Sarves

  • Cutting and pasting tables from one project to another

    When cutting and pasting existing tables from one project to
    another, the line weights for the cell borders seem to vary at
    random - some are the original line weight and some are heavier
    when pasted.
    I've tried sorting things out with the table properties
    dialogue, but to no effect.
    Is there a quick fix, or am I better importing in whole
    topics and then editing the imported topic?

    Hi Colum/Peter,
    It's not a custom table, I just need to copy an existing
    table from one project to another.
    My blasted developers (may the fleas of a thousand camels,
    etc), just decided to change the toolbars in one of our
    applications. As this toolbar appears in slightly different guises
    in about 6 tabs, I was trying to update the table that shows what
    icon does what and cut and paste that table into all the sub
    projects I have. Each table then only needs a minor edit for a few
    icons specific to that sub-project.
    Peter's on the right track. When I cut and pasted the table
    it also pasted in a number of lines of HTML associated with the
    styles in the other project. If I delete those lines, the table
    then appears as it should.
    Thanks for prompt response

  • Why compilation error--when trying to access the table from itcsi schema

    Hi,
    when querying the table from itcsi.app iam able to see the data but used in proc saying invalid table name. Whats the problem
    when declared p_app_i_old app.app_i%type----It is throwing pls-00201 error
    1 Create or replace procedure Test_insert(p_app_i_old integer,
    2 p_app_i_new integer,
    3 p_APP_ISAC_CPT_I varchar2)
    4 is
    5 cursor c1 is
    6 select distinct table_name,owner
    7 from all_tab_columns
    8 where owner = 'ITCSI' and column_name='APP_I';
    9 t_tablename varchar2(25);
    10 t_string varchar2(300);
    11 t_num number;
    12 Begin
    13 For c2 in c1 loop
    14 t_num := 0;
    15 t_string := 'SELECT count(*) FROM ' || c2.owner ||'.'||c2.table_name||' WHERE APP_I = '||p_
    16 execute immediate t_string into t_num;
    17 if t_num > 0 then
    18 -- dbms_output.put_line('The table name is '||c1_rec.table_name);
    19 if c2.Table_name = 'APP' Then
    20 INSERT INTO itcsi.App
    21 SELECT p_app_i_new,
    22 app_acrnym_c,
    23 app_x,
    24 app_desc_t,
    25 app_ipads_t,
    26 app_prdcn_stat_t,
    27 app_prdcn_stat_d,
    28 app_isd_tier_c,
    29 app_bus_cont_c,
    30 app_extnl_cstm_c,
    31 app-ecrpt_lvl_c,
    32 app_isac_cpt_i,
    33 dsw_gpn_i,
    34 ed_cntnt_srce_t,
    35 usr_upd_uunm_i,
    36 ed_upd_m
    37 FROM itcsi.APP
    38 WHERE app_i = p_app_i_old;
    39 elsif c2.Table_name = 'APP_CETRN' Then
    40 Insert into itcsi.APP_CETRN
    41 select p_app_i_new,
    42 app_cetrn_i,
    43 app-curr_cmplnc_t,
    44 app_rqr_cmplnc_t,
    45 dsw_gpn_i,
    46 ed_cntnt_srce_t,
    47 usr_upd_uunm_i,
    48 ed_upd_m
    49 FROM itcsi.APP_CETRN
    50 WHERE app_i = p_app_i_old;
    51 elsif c2.Table_name = 'APP_GPC' Then
    52 Insert into itcsi.APP_GPC
    53 select p_app_i_new,
    54 gpc_dpnt_x,
    55 gpc_elemy_x,
    56 pro_i,
    57 dsw_gpn_i,
    58 ed_cntnt_srce_t,
    59 usr_usr_upd_uunm
    60 FROM itcsi.APP_GPC
    61 WHERE app_i = p_app_i_old;
    62 End if;
    63 End if;
    64 End loop;
    65 --Commit;
    66* End;
    SQL> /
    Warning: Procedure created with compilation errors.
    SQL> show errors
    Errors for PROCEDURE TEST_INSERT:
    LINE/COL ERROR
    20/2 PL/SQL: SQL Statement ignored
    37/23 PL/SQL: ORA-00942: table or view does not exist
    40/2 PL/SQL: SQL Statement ignored
    Thanks

    how do i check the grant?
    if am in my own schema,how do i connect to itcsi
    schema?if you are using a schema other than the ITCSI schema, you need to login as ITCSI. or if you have dba user account you can grant a privilege of
      GRANT ALL on ITCSI.APPS to <other SCHEMA>;

  • Error in importing the tables from database

    HI ,
    while importing the table from the metada by using OCI call 10g/11g i am getting the below exception:
    *"Some objects are not imported because of invalid names : (DESCRIPTION =(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=orcl)))"*
    i am getting this exception after selecting the objects which i want to import from the database.....it first imports the tables and the throws the above exception and then removies from the repository view.
    How can i get this resolved???

    Hi,
    I'm also hitting this problem, did anyone solve this, I'm not able to import any data to the repository, error message is: -
    *"Some objects are not imported because of invalid names"*
    Thanks,
    Mike

  • Insert Image to table from a Non Database Field

    Hallo,
    db- 9i EE R2
    forms - 6i R2
    OS - W2003
    I have a requirement to upload Images to the database from forms.
    I planned to keep the transaction data and the Images separately in different tables with a reference.
    So, I created the Image field (BLOB)  with a Non Database Field in the Form and use a button to upload the Image. (using READ_IMAGE_FILE).
    I tried to insert the Image to the Actual Image table in PRE-INSERT Trigger at block level.
    But I was not able to Insert the using reference method.  (Cannot compile the PRE-INSERT)
          INSERT INTO IMAGE_TB (ID,IMAGE)
           VALUES (IMAGE_SEQ.NEXTVAL, :ITINERARY_MAP.IMAGE);
    So, Please help me to insert a image to different table from a Non Database Field?
    Thanks

    I don't think it will work with a non-db-item. But you could create a separate block based on your image_tb-table, use read_image_file on the then db-based-column and then simpy issue a commit_form.

  • In trying to install a Flash update on my Mac (version 10.7.5), I'm getting an "unable to install metafile" message after initialization starts (at the 25% point)-regardless of the site from which I download the installation folder.

    In trying to install a Flash update on my Mac (version 10.7.5), I'm getting an "unable to install metafile" message after initialization starts (at the 25% point)—regardless of the site from which I download the installation folder.

    Hello everybody, good news: after upgrading to Mountain Lion 10.8.5 I've been able to run the installer and all went fine.
    Mountain Lion allows user to force execution through the context-menu (CTRL-click) Open command and it does work, just that simple.
    So my advice is: if you want to install or re-install Flash Builder 4.6 on a Mac with Lion installed, upgrade to Mountain Lion or better to avoid problems.
    Apple introduced some (not all) Gatekeeper functionalities in 10.7.3 and following, but apparently you need a full-fledged 10.8 to have also what you need to circumvent a Revoked Certificate error.
    Since usually OS X has auto updating active, if you are running Lion you end up with 10.7.5 and won't install FB46. If you manage somehow to hold 10.7.2 I suppose you should be able to install FB46, sincerely I didn't check it out. Anyway it's simpler and safer to move on to 10.8.x.
    Bye

  • Need the TABLE where SALES TEXT of a material is stored

    I need the table where the sales text of a material is stored. This can be onbtained from MM03 --> SALES TEXT. Here we can pick it up from the language.I need the table where it is stored.

    Hi Gurpreet
    Please follow the below steps:
    1. Go to MM02.
    2. Select View: <b>Sales Text</b>
    3. When you are in the editor, use menupath: Goto->Header
    Here we can get the details of Text-ID, Text Name, Language, Text Object.
    Use these details for FM: READ_TEXT.
    We can retreive all text in the output of the FM.
    Hope this helps you.
    Kind Regards
    Eswar

Maybe you are looking for