Net-Weaver 4.0 installed on Windows-7 . and RRMX is not working...

Dear Experts,
We are using Net-Weaver 4.0 , BW 3.5 and Office-2007. But recently we have installed these over WINDOWS 7.
Previously it was working fine with WINDOWS - XP.
And now after installation , when I put RRMX transaction. I am getting error.
Please suggest , What shall I do ?
Thaks,
Utpal

Hi Utpal:
Probably you need to install a Front End Patch (FEP), with an "S" account you can download it from the SAP Marketplace.
What is the error message you get? search for related SAP Notes with details on this issue resolution. For example SAP Note 1533608 recommends installing FEP 400 of BW 3.5 Add-on of GUI 720 to solve issues with RRMX Transaction Code.
To download the file do the following.
1. Open the link https://websmp102.sap-ag.de/support
2. Click on the Tab "Software Downloads"
3. Click on the Section "Support Packages and Patches"
4. From the Menu on the left Click on "Browse our Download Catalog" option.
5. Click on the link "SAP Frontend Components"
6. Click on "BI ADDON FOR SAP GUI"
7. Click on "BW 3.5 ADDON FOR SAP GUI 7.20"
8. Click on "Win32" to display the list of available FEP for download.
Regards,
Francisco Milán.
Edited by: Francisco Milan on May 26, 2011 10:00 AM

Similar Messages

After installing Mountain Lion, iMessages and Facetime does not work. When I try to sign-in I get a message that says: The server encountered an error processing registration. Please try again later. Apple care does not know what is the cause. Please help

After installing Mountain Lion, iMessages and Facetime does not work. When I try to sign-in I get a message that says: The server encountered an error processing registration. Please try again later. After 4 calls to apple and 8 and a half hours on the phone. The apple people does not how to solve the problem. The last thing they told me is that they will send the problem to their engineers and I will hear from them. unfortunately they have not contact me.
During the phone calls I tried putting the date and time in automatic, changing the username and password, I even tried using somebody elses username and password. Please help, facetime is my tool to telecomute, and it is hurting my job.

I had the same problem and found the solution here:
https://discussions.apple.com/thread/3189272

TS1814 I have windows vista and this did not work for my ipod it still will not update PLEASE HELP!

I have windows vista and this did not work for my ipod it still will not update PLEASE HELP!
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

Try this:
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

I downloaded Elements 13 to my PC, but my PC has windows Vista and it does not work. How can I download it to my laptop that has Windows 8?

I downloaded Elements 13 to my PC, but my PC has windows Vista and it does not work. How can I download it to my laptop that has Windows 8?

You can get it at this link and validate with your 24 digit serial number - click here for PSE downloads

I just downloaded a few ITunes Apps to my PC using windows 8 and they will not work. Suggestions? Thank you.

I just downloaded a few ITunes Apps to my PC using windows 8 and they will not work. Suggestions? Thank you.

The apps can only be run on an iOS device. They will not run on your PC.

INstaled tiger 10.4 and now DVDSP not working

INstaled tiger 10.4 and now DVDSP not working. The buttons on the top bar are not showing up and sometimes the entire working panel does not show up. Can somene help me fix it please. Also can someone let me know how you uninstal sofware. thanks.

http://www.apple.com/support/downloads/proapplicationsupport31macosx104.html
This a pretty common question.
Best to start with a search first.
best wishes

Windows Vista and iTunes does not work

First Time sorry for my bad English, I'm from Germany and my English is not the best.
I have the new Windows Vista but iTunes does not work good.
And I have to use it, to manage my music on my iPod.
When there will be a Vista compatibles Version of iTunes??
And when will come an 64-Bit Version?
Thanks for Help,
Karsten

iTunes running under VISTA does not recognize media burned by iTunes Backup (v7.0.2) from a non-Vista machine.
The original machine recognizes the media just fine, but the new VISTA machine does not recognize the dvd at all.
Anyone else having a problem with VISTA recognizing burnt media?

WinHelp, Windows 8 and Ultrabook - macros not working

Our products are generated for WinHelp 2000 using RH9 for Word
The user has symptoms typical of macros not working. This has normally been caused by the user not properly doing the step described in the Knowledgebase article at http://support.microsoft.com/kb/917607 regarding " How to enable macros on a single computer after you install the WinHlp32.exe"
I have updated a machine to Windows 8, performed the Knowledgebase article items and our products work fine. I have also verified that the user's machine has the correct registry settings, so it looks like Windows 8 is not the culprit. That leaves the Ultrabook
This combination of Windows 8 and Ultrabook is quite new and I am hoping someone using WinHelp 2000 has already run into it.
Please let me know if so.
Thanks

David
On rereading this, I am not sure I follow.
You say "I have updated a machine to Windows 8, performed the Knowledgebase article items and our products work fine."
So on your machine it is OK but not on that of a user who has an Ultrabook, is that the case? If so, I'm not sure how to help as it is machine specific. Are you 100% sure they downloaded the right viewer and installed it with admin rights?
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Windows 8 and RD gateway not working!

I have Windows server 2008 (not R2) server running RD gateway and now finding that any client that has upgraded to windows 8 can longer connect via the RD Gateway server. We are using domain\username to log in as we have always done with windows 7
RDP client (which just worked). After reading a number of posts where certain "fixes" or "workarounds" have worked sadly none of these appear to apply to our setup.
I have made sure that ignore client certificates is set to ignore and restarted IIS, I have chacked the server logs and there are no failed logon events, in fact the authentication succeeds but the session isn't created.
Running out of ideas now...any help?
drac

Hi,
Thanks for the response, to answer your questions...
a. How did you judge that the authentication succeed, but the RDP session created failed?
There is an entry in the security event log showing a successful authentication request and no failures logon events for the time the user tried to connect
b. Are there any errors/prompted warning message when the issue occurred? If yes, please provide the errors/warnings to us.
There are no errors or warnings at the client side as such, the logon box just reports logon failure username or password incorrect and then re-prompts for UN and PW
c. Do all the Windows 8 clients have the issue or only some of them have the issue? Does the issue also occur on Windows 7 clients?
This happens with all Windows 8 clients or any Windows 7 client that has updated the RDP client to 6.2.9200, all other clients work ok.
d. Please let us know the Windows Server 2008 TS configuration information
Windows server 2008 (not R2), registered on the domain, with licensing server, TS gateway and session host added features. SSL certificate purchased from trusted CA. CAP configured to allow all domain users and RAP configured to allow access to
all resources. Server has been working happily away and still does for the majority of clients.
Hope this helps, let me knew if you need any further information.
Regards
Drac

Window 8 and Adobe does not work on Internet 10

I have Window 8 and running Internet Explorer 10 and when I go to a website that need Adobe to run the program, it tells me that I do not have Shockwave is enabled and ActiveX Filtering is not, and I have ran all the test that is aked on the site to check it out and everything is okay. I am not sure how to get it to work, any ideas? Runnng 10.1.5 Can anyone help me out?

Could you verify that you are using the desktop mode of IE and not the modern version?
http://forums.adobe.com/message/4814662#4814662

Windows live and yahoo messengers not working

Hi,
I have a blackberry 8520 using V5 OS and downloaded the latest service books as well as the latest version of windows live and yahoo messengers. The problem is i try to log onto either of them and its justs tries to login with no success, i am on a pay as you go tarfiff with access to wifi. Anybody got any ideas how i can fix this problem. many thanks in advance.

Hi and Welcome to the Community!
With a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive to your Messages app
2) Resend Service Books (pre-BB10 devices only)
KB02830 Send the service books for the BlackBerry Internet Service
Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
3) Reboot
With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should contact your mobile service provider for formal support...and to find out if, via the plan you are paying for, you even should be expecting these services to function. Many services will not function without an adequate data plan, even via WiFi...but only your carrier can tell you exactly what services you can expect to work with your plan.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I keep trying to install ad blocker (FF4) - and it does not work!

keep trying to install ad blocker - shows it installing, but cannot find it on my add on/extensions list after and does not work!

ADOBE FLASH PLAYER 10.3.183.5 INSTALLATION/ AND OPERATIG FAILURE WITH INT. EXP.9
Hello, I have spent four days and half of those nights trying to get this accursed thing to properly install and run. The damned thing indicates that it was successfully installed, but would not work and all programes that needed it, kept telling me I needed to instal it. Also, it appeared in my installed program list, but had no file size against it.
I had an hour on line with my Norton Tecnician, having suggested to him that Norton may be blocking it. He allegedly diconnected Norton and tried it, then told me the problem was not Norton.
WRONG!
I uninstalled it again for the millionth time, opened my Norton 360 and temporarily turned my Anti-virus off for 15 minutes, I then installed flash again and immediately re-set my Norton. In my case:
PROBLEM SOLVED!!
ps; I was signed in ( my username showing at top of page), but this forum would not display any button to add a reply or start a thread.
SOLUTION: Signed in again. Crazy or what?
Have a nice day.

Flash player installed on windows 8 (64 bit) machine NOT WORKING

I get this message IE not running on windows 8. Need Help

Have you run Windows Update to update Flash Player?
It can't be done through Adobe.
Also, worst case: Try Repairing IE

Install on windows 8 when IE is not working

Computer is connect to the internet but IE is not working.

Type '''about:preferences#advanced'''<Enter> in the address bar.
Under '''Advanced,''' Select '''Network.'''
Look for '''Configure How Firefox Connects''' and press the '''Settings''' button.
Check the settings.
Some problems occurs when your Internet security program was set
to trust the previous version of Firefox, but no longer recognizes your
updated version as trusted. Now how to fix the problem: To allow
Firefox to connect to the Internet again;
* Make sure your Internet security software is up-to-date (i.e. you are running the latest version).
* Remove Firefox from your program's list of trusted or recognized programs. For detailed instructions, see
'''[https://support.mozilla.org/en-US/kb/configure-firewalls-so-firefox-can-access-internet Configure firewalls so that Firefox can access the Internet.]''' {web link}

I get an offer to install 7.1.0 and it does not work

When I click on the CHECK FOR UPDATES now
in my Adobe Acrobat 7.0
I get an offer to install 7.1.0
"This recommended update of Adobe® Acrobat® Professional to version 7.1.0 includes several important security fixes and will update any previous version of Acrobat 7 Professional."
I have already installed this version 7.1.0 repetitively
Why does not the CHECK FOR UPDATES option offer something else ?
Roger GRAVEL
[private information deleted by host]

I am not sure why you are not getting the other update offers. I haven't updated AA7 is quite a while, but have always done it with the individual downloads from http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows. You do have to install them in order unless indicated otherwise. You only have to reboot after the last update.

Net-Weaver 4.0 installed on Windows-7 . and RRMX is not working...

Similar Messages

Maybe you are looking for