Network ... almost working but not for all adresses[RESOLVED]

Hi,
I have a very weird matter since a few weeks. (can't figure out if it's due tu an update or what).
I'm currently writing from my arch laptop : so you may say my network works fine.
Exept, it only works with some sites.
I mean : I cannot access http://www.archlinux.fr/ for exampe, or many other, whereas other work juste fine.
(by "access" I mean : use a browser to see the page.)
This happens :
- on Wifi
- on linked network
- with chromium or firefox
On the other hand : ping and traceroute works fine for these otherwise unreachable adresses.
Weirder still : if I reboot on another OS, everything works flawlessly.
Another PC linked to the same broadband router will show no problem either.
Accessing the "cache" version of sites from g**gle page shows results.
I tried reboot, network restart ... now I dont' know what to try.
Here's my hardware : Laptop is Lenovo Y510
03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
04:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express (rev 02)
kernel 2.6.32-ARCH
in one word : Help ! ;-)
Last edited by skai (2010-01-09 12:09:16)

Hmm, seems I solved it by tweeking with the broadband router.
(I fed it with a backup DNS, and reactivated DoS firewall)
Does neither explain why another PC worked well alongside this one,
nor why another OS gave other results.
Maybe just a broadband router inconsistency, anyway, l'll consider this fixed for now.

Similar Messages

Speakerphone problem - lost voice from speakerphone while playing music or gaming youtube, while call or voice recording playing - all works fine, so speakerphone is working but not on all apps. hard reset done - no changes

or gaming youtube, while call or voice recording playing - all works fine, so speakerphone is working but not on all apps. hard reset done - no changes.
iphone 4
SOLVED plugin to charger solved it - so problem was with contacts -- no idea why - phone is new - no water - no havy dust - usual using
hope will never return. Thanks

We checked it with an iPhone 5 in house multiple times and could not reproduce this Problem. Must be something specific to your device. Maybe your speakerphone volume is turned down completely?
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

Task List URL (to FR Report) opens in new window, but not for all users!

Hi all,
I am not sure if this is the correct forum to ask the question (for me it looks like an IE topic), but perhaps anybody can help me anyway...
In one of our Planning apps (9.3.1) we defined several task lists and tasks that link to relevant FR Reports (URL Tasks). If I open the URL task in basic view the relevant FR Report opens in the same IE Window (in the main frame of the planning app). If my colleague opens the same task the FR Reports opens in a new IE Window.
My problem is that I dont have any ideas where I can set the relevant property. Is that a planning property, a workspace property or an IE property setting??? Where can I adjust the settings that for ALL users the URL opens the Report in the same window??????
Thanks in advance!!!!
Kind Regards
André
P.S.: We are on IE8.

Have you both got the same settings in Tools > Internet Options > Tabs Settings
There was also a bug though I can't say if it is related to your issue
9549216 - Instead of a new tab, a new window is displayed after you create a Financial Reporting task in Workspace.
Cheers
John
http://john-goodwin.blogspot.com/

Direct push stop working for many iphones but not for all. including Android.

Hi Guys,
We have 2 node DAG and devices are connecting to Kemp load balancer for HA. Last week,There were Cisco Network switch activity(network team had upgraded switch firmware) and since then few iphone' direct push is stop working however fetch
is working fine. There is no alert on LB/exchange .
Funny things is, my iphone is working fine .. i am getting email before it shows on outlook.
Additionally when i checked active sync for my account or others (having issue)https://testconnectivity.microsoft.com/ there are some error (attached).
Amit Rawat | MCITP - Exchange 2007/2010| CCNA |MCSE- 2003| Lync 2010|http://blog.amitrawat.net

Hi Amit,
According to your description, I understand that some mobile phone cannot get the push from Exchange server after add an Cisco Network switch in your environment, besides test ActiveSync failed with very long delay.
I want to double confirm some points, please help to collect the answer for following questions:
1. What’s the function for Kemp load balance, hardware or network traffic optimization?
2. Are you using Cisco network switch as network load balance functionality?
3. How about the Outlook sync from the external?
Depend on the error message and your test, it’s related to Network issue instead of Exchange.
Please try to use Microsoft Network Monitor to get more detail progress of the connection of sync, for more resource:
http://www.microsoft.com/en-in/download/details.aspx?id=4865
Additional, please contact Mobility and ActiveSync Team so that you can get more professional suggestions. For your convenience:
https://social.technet.microsoft.com/Forums/en-US/home?forum=exchangesvrmobilitylegacy
Best Regards,
Allen Wang

Phone is not getting signal to make calls, sometime it works but not for the most part. I can hear callers at times but they can not hear me.

Hello.
Looking for help on how to get a better signal when receiving and placing calls. Phone got a little wet and is having hard time placing calls and receiving call. Calls are breaking up most of the time but some times I have 4 bars and phone calls goes through just fine. Noticed phone is having troubling connecting to towers. Get a call but caller can not hear me when I have only one bar showing on phone. Phone does hit 4 bars sometime and phone call is clear. Any suggestion., new phone still learning how to use. Should I try to reset to factory settings??? Have read lot of negative comments on the web about doing this. Trying all options before going to the Apple store.
Thanks for any help or advice.

I ended up getting a new phone, straight through Apple. I called their technical support and went through all he basics again and they decided to replace it. Was a pretty quick process - after defaulting and resetting the whole phone (about 2 hours), I called them back to inform that there was no change, so they set up the order.
I had to give my CC# so they could hold a charge on it (in case I didn't send my old phone bach, which they sent me a pre-posted package to send it in anyway). Had a brand new iPhone 4S in my hands in 4 days, which was pretty decent. I had uploaded everything previously to iCloud, so setting up the new phone was a snap.
Only thing I really didn't like was they charged me almost 30 bucks for shipping or processing, or something. Not so sure that should have been my responsibility after spending so much on a brand new product, only to have to have it warrantied after, like, a month.

Range extension works but not for wireless. I can't figure it out.

I have a problem I have not seen elsewhere: I have dsl hooked up to an Airport Extreme, which works great in our house. However, we have a studio / office that is about 100 feet away. I have no problem extending the range (wirelessly) with an Airport Express so that my husband can get the internet on his computer, which is a desktop and attached by an ethernet cable to the Express. The problem is that THERE IS NO WIRELESS signal available in the studio. I have tried adding another Extreme to a different socket and even moved the Express with no luck. Am I weakening the signal by somehow channeling it all into the desktop? I just don't get it. I would love to be able to use the intenet capabilities that are on the 50" HD tv in there, as well as use my laptop / wireless capabilities on my cellphone, but nada. Not to mention that I have one expensive Extreme sitting unused (and out of the returnable time window.)
I would certainly appreciate any ideas - But please make them simple because I don't always understand technological lingo. Thanks!

I am assuming that the SNR reading of 27 was taken at the location of the Express with the Express powered-off so that we are only reading the signal quality of the Extreme ... correct?
If so, in general the Extreme has a "better" antenna design over the Express. I would second your suggestion to using a second Extreme to extend the first to see if this improves the Wi-Fi situation at the office location. Another option is to move the Express a bit closer to the Extreme.

Network Accounts Unavailable but not on all machines

Hi
I have a client with a Dual processor XServe G5 running 10.4.8 server, their Macs are also on 10.4.8 and they are setup with Network Home Directories.
In the last few weeks, I have had intermittant problems with a couple of the machines that don't seem to be able to log onto their accounts in the morning when first switching the machines on. Clicking on the status line in the login window in this instance shows "Network Accounts Unavailable".
To solve this I have been logging in remotely as admin to the machine(s) in question, deleting the LDAP configuration in Directory Access, re-configuring, rebinding and then logging out. When doing this, the Network Accounts are then shown as available and the user can log in normally.
Interestingly, when I get to the point of deleting the configuration, it says that it can't contact the LDAP server, and asks if I want to force a disconnection and I guess this is why the user can't get to their network account in the first place, because it can't see the LDAP server?
However, other machines on the network, don't have this problem and can log in after a restart or shutdown with no problems. Why would it do it on just a couple of machines? Could it be the network switch?
None of these machines are connected via a wireless connection, they are all hard wired into a small 5 port switch, which in turn is wired back to the main switch in their rack and this is a 10/100 Allied Telesyn unit.
Any ideas as to what I can do to resolve these intermittant issues. It's becoming a pain to have to resolve this every morning for the client when they come in.
Thanks
Paul
PowerBook G4 17" Mac OS X (10.4.8)
PowerBook G4 17" Mac OS X (10.4.8)

Hmm, seems I solved it by tweeking with the broadband router.
(I fed it with a backup DNS, and reactivated DoS firewall)
Does neither explain why another PC worked well alongside this one,
nor why another OS gave other results.
Maybe just a broadband router inconsistency, anyway, l'll consider this fixed for now.

Unable to edit table data, but not for all tables

I have multiple tables in a schema. For some tables, I am able make edits to table data directly, i.e., context menu Table | Open, and the Data tab. When I am able to edit, I do get a pencil icon inside the cell I am editing/typing (and am able to commit the changes). When I am not able to edit, it does nothing (no error messages, sound, or visual cue). I thought it had to do with who owns the table object, but I log in as the same owner of the affected table objects.
Any pointers would be greatly appreciated so I am equipped when asking the DBA.
Thanks,
OS: Windows XP Professional SP2
Java(TM) Platform: 1.6.0_11
Oracle IDE: 2.1.1.64.45
Versioning Support: 2.1.1.64.45
Edited by: New2OWB10gR2 on Jun 23, 2010 12:20 PM

Hello again,
Here you are the DDL of the offending table:
CREATE TABLE "DBADMEX"."T50SEC82"
"COD_EMPRESA" CHAR(4 BYTE) DEFAULT ' ' NOT NULL ENABLE,
"COD_EMPR_CONT" CHAR(4 BYTE) DEFAULT ' ' NOT NULL ENABLE,
"COD_SECT_CONT" CHAR(2 BYTE) DEFAULT ' ' NOT NULL ENABLE,
"NUM_CUEN_CONT" CHAR(18 BYTE) DEFAULT ' ' NOT NULL ENABLE,
"COD_PAIS" CHAR(4 BYTE) DEFAULT ' ' NOT NULL ENABLE,
"COD_SECTOR" CHAR(6 BYTE) DEFAULT ' ' NOT NULL ENABLE
PCTFREE 10 PCTUSED 40 INITRANS 50 MAXTRANS 255 NOCOMPRESS LOGGING STORAGE
INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT
TABLESPACE "TS_50" ;
CREATE UNIQUE INDEX "DBADMEX"."I5000082" ON "DBADMEX"."T50SEC82"
"COD_EMPRESA", "COD_EMPR_CONT", "COD_SECT_CONT", "NUM_CUEN_CONT"
PCTFREE 10 INITRANS 50 MAXTRANS 255 COMPUTE STATISTICS STORAGE
INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT
TABLESPACE "TS_50" ;
We are using the following versions:
Oracle database: 11.1.0.7.0
Oracle Client: 11.2.0.1.0
Windows (where the client runs): XP SP3 (version 5.1 Build 2600_spsp_sp3_gdr.080814-1236) in spanish.
SQL Developer: 2.1.1.64 (MAIN-64.45)
I think I haven't forgotten anything.
Thanks in advance for your help!

Printer prints some PDF objects as filled (but shows borders only in preview). Print as image helps, but not for all computers. Acrobat X Pro, OCE printer.

We create PDF from Autocad using Adobe PDF printer. When printing that PDF file to OCE printer, some drawing objects are printed as filled (but Acrobat shows correctly - border only). If I open the PDF with Internet browser, I can see those objects as filled as well. If I print the PDF as image from some, not all computers - it prints ok, not filled.
Please help.

File>Print
- Look under the Properties and Advanced buttons

Button on video track via subtitles work but not for audio via story

Hello,
I have a video track with two different audio (two versions of music). I have created two buttons within a subtitle to have them directly on the video
if i make a link to the menu, the button work correctly. But in fact i make a link to two different stories, each with the different audio track
this way it does not work ..
any idea ?
DVSP3

Hey Thierry Arnould,
You could use scripts.
Create 2 scripts each with the function "Set System Stream"
and select the "audio streams" which you want to use.
Then add as Startscript to the corresponding story.
hope that helps
G5 Mac OS X (10.4.7)

MarkerText - position and visible for one serie (not for all of them)

Hello,
can I position the MarkerText in a graph in this way that is centered horizontally inside the serie?
I know I can use the element markerTextPlace to place the MarkerText in relation to the marker, but that is not waht I want. With this solution I get the MarkerText only on the bar or around the bar, but what I want is that the MarkerText will be shown on the center of the area (of the serie - horizontally) .
I also want to make the MarketText visible only for specific series (one serie) but not for all series. Waht I can do is show the Markertext or not but it affects all the MarkerText of all the Series.
Any help?
Codruta

What version of OS X and Mail are you running?

Problem with drivers for HP B109 a-m all-in-one, have printer working but not scanner in windows 8

Still have a problem with the drivers in Windows 8 release preview, for my HP B109 a-m all-in-one, have printer working but not scanner, is there any chance of a fix before final release of Windows 8 ?.

Review my post here:
http://h30434.www3.hp.com/t5/Windows-8-Release-Preview/SOLUTION-Get-Win-7-Printer-Drivers-HP-Solutio...
And see if something similar will work for you.

ICloud keeps asking for password but will not take it. All other devices work but not my IMac???

ICloud keeps asking for password but will not take it. All other devices work but not my IMac???

Exactly which password are you inputting? iCloud looks for your AppleID password.

I can't get volume on Main Output to work correctly with controllers on my keyboard. It's either all on or all off. Works fine for individual instruments (thought it lumps them all together) but not for main volume output on concert. Thanks for any help.

I can't get volume on Main Output to work correctly with controllers on my keyboard. It's either all on or all off. Works fine for individual instruments (thought it lumps them all together) but not for main volume output on concert. Thanks for any help.

Hi
frodojon wrote:
I either didn't do the correct mapping sequence before or I'm starting to wonder if it has something to do with my keyboard which has the expression pedal set to the same volume control as the mod wheel.
All this sounds like you are confused about the general nature of MIDI Continuous Controllers (MIDI CC). The MIDI specification allows for 128 different CC's: CC0 to CC127. Some are typically "preallocated" to 'standard functions: CC1= Modulation, CC7=Volume, CC10+Pan, CC11= 'Expression'. Some act as switches such as 'Sustain' CC64.
frodojon wrote:
Everything appears to be scaled from -63 to +64 if that's what you mean by scaling? What do you mean by MIDI CC7?
Mainstage works with MIDI CC's generally in a number of ways:
Some standard ones are automatically passed through to all MIDI/Instrument channels unless you specifically block them. Others are not passed through unless you specifically map them to something.
This mapping can be done basically two ways (with MS 2.2):
a) Make a Screen Control in Layout mode, and assign it to a particular incoming MIDI CC message. Then, you can map this Screeen Control to a variety of parameters such as the volume of a particular channel strip.
b) With MS 2.2, you can do the above Assign and Mapping directly, without the need for Screen Controls as an 'intermediary'.
frodojon wrote:
something to do with my keyboard which has the expression pedal set to the same volume control as the mod wheel. I
Yes.
It sounds to me like you have an issue where you have several hardware controls on your Keyboard set up to transmit the same MIDI CC. This is probably not a good idea, and it would be much better if you assigned them to transmit different CC messages (CC1 for Modulation and probably CC11 for the Expression (though you may want to set the pedal to some other number instead.
Once you are transmitting different CC messages, you will be able to Assign and Map much more flexibly:
for example, you could one to control the overall output volume at Concert Level in MS, whilst the other controls the volume of a specific channel within a Patch.
Your issue of layered patches is one of "Scaling": one Screen Control (assigned to an incoming MIDI CC message) needs to alter the ranges of different channel strips to different amounts. You can set this up by using multiple mappings for one Control, each set to work over a particular range (for example a goes from -20 to 0 whilst b goes from -30 to -20 etc.).
hth
CCT

Router works for desktop, but not for surrounding laptops.

The router I have is the Linksys E1000. I bought it and hooked it up yesterday and works great for my desktop but not for my daughters laptop. Her laptop has wireless automatic internet recognitions which allows her to pick up surrounding internet networks. We cannot figure out how to make this work. Please help!

Are you able to see your router's network name on your laptop? If yes, then follow the below mentioned settings.
Click Start >> Control Panel >> Network and Sharing Center >> Manage Wireless Networks, here remove all the networks present and close the Window...
Click on Connect to a Network and try to re-connect to your Network, it should ask for your Network Key/Password, enter the correct password/network key and click Connect...
It should connect...Once you are connected you should restart the computer, it should connect to Internet...

Network ... almost working but not for all adresses[RESOLVED]

Similar Messages

Maybe you are looking for