Network between mac os 10.6.1 and windows 7

HI guys
I asking about networking between mac os 10.6.1 and windows 7
on windows 7, I opened file,printer sharing on (workgroup)homegroup.
on mac os 10.6.1, finder->go->computer. It show Macintosh HD & Network, click on Network, there is nothing there.
The only I can do is.... finder->go->connect to server (input smb://192.168.xxx.xxx and connect)
After that, on finder->go->computer->network is showing up 192.168.xxx.xxx
MY QUESTION IS HOW I CAN SEE WINDOWS (workgroup)HOMEGROUP ON MAC OS 10.6.1 BEFORE CONNECTED TO 192.168.XXX.XXX BY HAND?
Thank you!

I think you are asking, in effect, why you can't see your smb shares in "Shared" in the sidebar of a finder window? Often Sno does not make that connection automatically, and one must connect via smb://IpAddress (or computer network name). Once you do so, if you keep the connection active, then the Win7 machine is likely to be found under Shared eventually. The only way I have found to keep shares showning under Shared for an extended period is to keep all pertinent machines from sleeping over the period of expected access.

Similar Messages

Severe Incompatibility between Mac Pro 2012 power supply and Tripp Lite 2400 watt Line Conditioner [switching transformer].

Severe Incompatibility between Mac Pro 2012 power supply and Tripp Lite LC2400 [switching transformer].
The Mac Pro will not power on when connected to the Tripp Lite LC2400. The Power Supply makes continuous clicking noises and repeatedly resets the Mac Pro every 3 seconds.
The same Mac Pro connected to an outlet with no Tripp Lite starts up with no problem.

Hi,
I've the same notebook. I've not had any hardlocks so far, but I've not seen so much flash movies yet. Anyway, I just tried closing running youtube-video tab on Kde4 + enabled desktop effects -> Everything's fine.
Anyway, perhaps we can collect some issues and solutions in this thread. Here are problems, that I encounter:
- restart does not work
- errors during boot:
[ 2.399277] pnp 00:0b: [irq 23]
[ 2.399308] pnp 00:0b: Plug and Play ACPI device, IDs SMO8800 (active)
[ 2.932179] pnp 00:0c: can't evaluate _CRS: 12311
[ 14.616662] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 14.616771] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 14.616792] iTCO_wdt: cannot register miscdev on minor=130 (err=-16)
[ 14.616904] iTCO_wdt: probe of iTCO_wdt failed with error -16
[ 9.262898] sdhci-pci 0000:0b:00.1: SDHCI controller found [1217:8321] (rev 5)
[ 9.262920] sdhci-pci 0000:0b:00.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 9.262966] sdhci-pci 0000:0b:00.1: Invalid iomem size. You may experience problems.
[ 9.263176] sdhci-pci 0000:0b:00.1: setting latency timer to 64
Issued solved:
- in order to make nvidia graphics working you have to disable Optimius in BIOS.
- Battery not recognized -- fixed after recend updates
- grub2 does not work. As soon as grub2 loads, the laptop reboots. -> stick to grub1 -- works now (either I did sth wrong the first time or a new version of grub2 fixes this issue)
- in order to make the touchpad work properly install psmouse-elantech from AUR
update: this is only a half-solution. vertical scrolling on the right edge works but graphical tools which rely on x11-input-synpatics still don't work. However, everything works fine with kernel 3.3. Once this in the main arch repos you won't need psmouse-elantech anymore.
Last edited by knue (2012-03-06 23:26:26)

How can I partition my external hard drive supporting mac OS in one partition and windows OS in another?

Hello everyone, how can I partition my external hard drive supporting mac OS in one partition and windows OS in another?

OK. Start with:
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to two (2). Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Click on the Erase tab in DU's main window. Select one of the two partitions, preferably the first one, change the Format type: to MSDOS then click on the Erase button.

I forgot to back-up my information (pictures, excel documents) on MAC before installing boot camp and Windows. I am mid-way through the process, at the point where I need to install the drivers. Will i be able to retrieve my documents on MAC or not?

I forgot to back-up my information (pictures, excel documents) on MAC before installing boot camp and Windows. I am mid-way through the process, at the point where I need to install the drivers. Will i be able to retrieve my documents on MAC and finalizing the Windows 7 installation (for the 1st time) or not?
I am worried that may lose my information... Appreciate any feedback! Note: already half-way in the process of installing!

Yes, IF you picked the right partition, as in the Boot Camp partition. If everything is done right you should be able to boot into the Mac side.
If you already booted into Windows and are at the point of installing the Boot Camp Drivers your already done installing Windows! Yea! All you need to do is just install the drivers and everything should work normal.
The Windows partition and the Mac partition are seen as two different HD's now as far as the computer knows.
You can use the Boot Camp control panel in Windows to boot into the Mac side and the Startup Disk in System Preferences on the Mac to switch to Windows. If you can't then press and hold down the Option key untill you get the boot screen.

What are the minimum hardware requirements to install both MAC OS X Snow Leopard and Windows on a Mac

Hi,
I want to install both MAC OS X Snow Leopard and WINDOWS on a same PC. Is it possible..then mention the minimum Hardware support to install both Operating Systems on a PC. I am waiting for relevant reply from Apple Support Team.
Thank You.

I am waiting for relevant reply from Apple Support Team.
Then you'll be waiting a long time. This is a user to user support site hosted by Apple. The Apple Support Team doesn't respond to posts here.
For Snow Leopard, you need an Apple computer with an Intel processor of any flavor. Here are the specs from the Apple Store:
System Requirements
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
You'd have to contact Microsoft to find out what specs its OS requires, but I imagine the above would cover it.
Also note that Snow Leopard is only licensed to run on Apple branded equipment.

Creating network between Mac and Linux

Hello guys! I need to set up network between my iMac and Ubuntu linux. iMac is connected in internet by Airport and Fon Wifi Router witch is connected in router which is connected to adsl -modem. My pc is connected directly to router. Both computers have access to internet. Is there any easy solutions to share files with mac and linux? I don't need any webservers etc, I just want to share files.
Other question related to this, why is my mac's ip address like 192.168... and linux ip addrress is 84.250...?
Thanks allready!

Though I'm not newbie with computers, I'm really confused becouse I haven't set up network like this never before.
Not a problem, no worry... we all know something somebody else doesn't and vice versa.
My linux says that my DHCP -IP is 193.210.18.18, is that related to this in any way?
Yes, if the Mac had an IP of 193.210.18.x, (but not 18 for x), then connection would be simple, but I think we must have two devices passing out IPs. What is the Mac's IP again?
http://www.helpdesk.umd.edu/topics/communication/ethernet/office/winxp/2882/
Do you have any advice where I could start looking from the right IP of my linux?
http://www.webmasterforums.com/networks-clusters/1804-find-ip-address-my-linux-b ox.html
I'm not sure if its even configurable.
http://tinyurl.com/2gug9s

HT2518 network between Mac and Windows computer system

I HAVE AN OLD PC WITH WIN AND GET ANOTHER OF MAC OS WANT MAKE A NETWORK BETWEEN THEM PLASE TELL ME

Poor show Apple
Apple personnel aren't here. We're all just users like yourself and apparently there's no one here who's seen your post and can offer a solution.

Im trying a home network between Mac and Win 7, but its very slow

Hi guys,
ive searched for this for the last couple of days, but i havent found my sollution yet.
I have been trying to setup a network between my macbook and win7, and it works...i can move data.
The problem is that it is VERY slow. (2MB/sec max in the monitor app, it takes 6 minutes to transfer 1GB)
This is my setup:
Macbook 2011 ML 10.8 (I use WiFi to the router)
Zyxel P-2601HN-F1
Dell PC (connected thru ethernet cable to the router)
The ethernet adapter of the Dell is 192.168.1.37 and its a new cabel.
So i type in CMD-K, then smb://192.168.1.37 and connect with user and pass
I tried all the stuff i read here, like changing channels, but it stays really slow.
The crazy part is when i do both in Wifi, its almost as fast as with cable...and i DO use different ips in the smb connection
Maybe im going wired all over the studio and my house, but i would be awesome if this would work at least at 10/20MB/s, thats almost usb stick speed.
please help,
wendel

So i bought the Airport Extreme and hooked up all my hd's on the usb port...
the wireles upload speed from macbook to hd's is 5-6MB/s which is a lot better (40-48Mbit/s)
in the end i think its a protocol & adapter settings issue, with Windows using smb2, and apple using some old protocol from the 90's in ML 10.8.x
Also, there are a lot of (for me) complicated network adapter settings one has to know, before getting great transfer speeds between Win and OSX...so its easy to mess it up in Windows 7.
I read that Mavericks switched to smb2 too...so let's wait for all my software to be mavericks compatible and see how fast that will be with my Airport Extreme!
cheerio

Networking between macs problem

I have a Macbook pro and an 2 iMacs running mavericks and windows 7 under parallels and also 2 PC's running windows 7 on my LAN. They are all linked up with ethernet cables to a hub and a router. Internet connection on all is good and solid and never any problem. However connecting them together in order to share files since I upgraded the macs to mavericks has been a nightmare. There doesn't seem to be any reason to how one minute I can connect to an iMac from my book and then an hour later it can't. I may be able to connect from the iMac to my book, but then not to one of the PC's. It's perplexing and intermittent. Is there some way I can just reset all my network settings/locations and start again setting up my LAN from scratch? Should I create a workgroup as one does for windows? Should I rename all my computers? Please help as I'm sick of walking back and forth with a memory stick and airdrop isn't any good to me when I'm going from mac to PC.

Thanks but I'd much rather solve the issue. I've been swapping files over the LAN in my office between all different OSX versions and windows XP and 7 without any problems for the past 4 years, until now. The main difficulty seems to be between on iMac running mavs and my Macbook Pro also running Mavs. The others don't seem to have a problem apart from odd occasions. Why is this unreliable all of a sudden? I'd like to think that there's a way I can reset things or perhaps dump a cache somewhere to start a fresh. I know it's not my sharing settings because otherwise the other computers in the room wouldn't be able to share between both problem machines.

Wireless network between mac + PC keeps failing to connect.

Both of my computers my Macbook and my HP PC are connected on the same wireless internet connection with the same IP address the same server name and everything. I have been through both devices and enabled every sharing setting could find and think about.
I need this wireless network to get printer sharing online. as the PC has the printer connected via USB to it. If anyone can assist please do.
Thanks,
Connor.

Ok I got the PC to see my HP 940c wirelessly using Bonjour. However, I still can't get the Lexmark 2250 to show up on either the mac or pc wirelessly when connected to the hub? Is using a 4-port hub connected to the Airport express just not going to cut it for making a multiple printer hub?
I'd really like to do this plus make an network between the two computers.

I set the prefferance to show tabs and windows from last session but every time i power down my firefox or my Mac all my app tabs and windows disapear. what's wrong with my settings.

I set my preferences to '''show all tabs and windows from last session''' and un-checked the box for '''don't load tabs until selected''' but every time I turn off fire fox and power down my Mac all my app tabs disappear.

Make sure that you do not use Clear Recent History to clear the <i>Browsing History</i> when you close Firefox.
*https://support.mozilla.com/kb/Clear+Recent+History

Mac Pro crashes on Leopard and Windows XP

Hello,
I've a quite interesting problem here!
It started with a crash this morning while running Minecraft (a 3D game): The music was still runing normally, I could still move the mouse cursor, but couldn't access any windows or applications. I couldn't use my keyboard neither. I was however able to run Mac OS X normally after this incident.
Then, later on Windows XP I ran a 3D game and Windows crashed (death blue screen).
From this moment, I couldn't start Mac OS X anymore. It goes well until the small apple and the waiting circle, but then the circle stops, I see vertical light blue lines over the screen, and black&white horizontal lines at the bottom of the screen. Then, I've got a blue screen still with the horizontal black&white lines and it stays like that.
I'm able to start Mac OS X on safe mode, but I have horizontal white lines all over the screen and my mouse cursor is a square of about 1cm.
I'm not able anymore to launch the startup disk, because, when I boot from the disk, it crashes after a while on the apple screen and I've got the same vertical light blue lines.
I was able to run the disk utility, it says everything is OK. I ran the extensive hardware tests and it also says everything is fine.
I cannot neither run Windows, I just get my screen turning off (black screen without signal).
The graphic card is a GeForce 8800 Gt.
Any idea???? => I'm ready to reinstall Mac OS X, but I need to know how since I cannot run the install disk!
Thank you really much for your help!
leo

Lack of cooling under Windows.
A graphic card dying. ATI 5770 upgrade.
Disk Utility First Aid isn't 100% fool-proof.
FBDIMMs need cooling and could be dying also (AHT won't pick that up).
Disk Warrior for Mac OS; chkdsk for XP along with:
http://www.informationweek.com/showArticle.jhtml?articleID=185301251
Never forget to check and try to rule out any USB or other cables, extensions, devices etc. They can cause mischief. USB keyboards, hubs included.
Not a lot that can be done under Windows to improve cooling like you can with SmcFanControl under Mac OS but there is/was "InputRemapper" that does help - a lot.

After updating to OSX 10.9.4, WiFi connection keeps getting dropped. This happened on 3 Macs, but my iPhone, iPad, and Windows computer all connect to WiFi just fine.

I recently updated three Macs to Mavericks OS 10.9.4. All three Macs now cannot stay connected to WiFi.
Other devices (iOS and Windows) have no such problem, so it isn't the WiFi itself.
It seems to be OS X 10.9.4 which is the problem.
10.9.3 did not have this problem either.

Troubleshooting Wi-Fi issues in OS X
Wireless Connection Problems - Fix
Wireless Connection Problems - Fix (2)
Wireless Connection Problems - Fix (3)
Wireless Connection Problems - Fix (4)
Wireless Diagnostics - About
Also try turning off Bluetooth

I am unable to share files satisfactorily over my home network between Mac and Windows

Please advise.
I have an iMac with a LaCie Thunderbolt external hard drive and a Windows 7 laptop connected via ethernet network to a Belkin router with a WD MyBook Live Duo attached to it via USB. The iMac also has a virtual PC in it using VMWare.
I have never been able to get file sharing to work satisfactorily across the network.
From the iMac, which is now running Yosemite, I can access the laptop and the external hard drive fine, but connections to the WD network drive are very slow and unreliable.
From the laptop, I can access the iMac and the WD network drive OK but while the LaCie share formatted for windows is visible, I am unable to open the individual files.
I was advised that I need a server. I have therefore bought and installed OS X Server on my Mac but I don't understand it and have absolutely no idea what to do to make it work. I open the LaCie share for example and cannot change anything - I get the message " 'Ignore ownership on this volume' is turned on for the volume containing the Share Point. All permissions will be ignored. This can be turned off in the 'Get info' window in the Finder." Except it can't, because there is no such option in that window.
I can find no help anywhere for this. Please tell me how I set my network up so that files can be shared freely across it.

Poor show Apple
Apple personnel aren't here. We're all just users like yourself and apparently there's no one here who's seen your post and can offer a solution.

How to create a wifi network between Mac and iPhone

Hi there,
I have just wired Internet at my house, and i would like to create a network with the wifi of the mac, to connect my iPhone to the Internet.
Is that possible?
i have tried to do, I've created a network, encrypted it, the iPhone recognize it, but when i try to use safari, the following message appears.
"safari can`t open the page because it can't find the server"
So, is that possible and i am doing something wrong, or it isn't possible?
thx in advantage
Marcelo França
Brazil

This is a possibility. But please be aware using your Mac to emit a WiFi connection is a temporary solution. And it will get a short range unlike an actual WiFi Router. Also you may find it to be unstable at times. The Airport Card in your Mac was not designed to be a full time Router WiFi emitter. But more of a receiver to get the signal and use it for personal use.
1. Unlock the network on your Mac make it an open network
2. Go to your iPhone, Settings-Wireless-Tap on blue circle next to network name, Choose Forget network
3. Now go back, It will rescan and find an open network, Connect, and see if Safari works
If Safari works, Then you had a Security issue. Try using WEP 128 bit 13 character passkey or WEP 8 Character Passkey.
Cheers and best of luck
Message was edited by: Andrew T.

Network between mac os 10.6.1 and windows 7

Similar Messages

Maybe you are looking for