Network connectivity on Sparc with Solaris 8
Hello friends,
I have a Sparc Ultra 5 machine with Solaris 8 .
Now I want to establish network connectivity by configuring net work card in it.also I want to establish connectivity with Intel Systems also.How can I accomplish this.
I will be grateful to you if u cud guide me in this.
Thank u in anticipation
sreerama
I think the V20z have an ordinary broadcom chipset, if so the network interface should be called bgeX.
So try:
ifconfig bge0 plumb
.. dont forget your /etc/hostname.bge0 file..
7/M.
Similar Messages
-
Officejet 6700 on a wired network connected to PC with WP OS.
After booting up connection works well. When I come back later after not using the computer the connection is lost and I msut reboot the PC to re-connect the computer to the Officejet.
Any ideas?Hi there,
Try downloading and running the print and scan doctor located here:
http://goo.gl/Ujpib
It can fix a lot on its own and if not give a better idea of what is going on.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too. -
Can OAS 4.0.8.1 be installed on a Sparc with Solaris 2.7? THe release notes talk about Solaris 2.51 and 2.6, but not words about 2.7
Thx
SudhaDoes your code extend frame? If so then having super("title") should work. If it isn't working try putting in a setTitle("title") call after the super.
If you are just creating a frame:
Frame f = new Frame("title");
should create a frame with the title "title". Again you can use the setTitle method to set the title.
f.setTitle("title");
How this helps.
Bruce -
Networking with solaris 7 on x86
Hi all
i installed Solaris 7 on 2 intel pcs. At the time of installing solaris 7, i was only asked to provide the host name, it didn't ask for the IP address. So after installation I saw a line in /etc/hosts file which is different from Sparc machines. Here is how it looked:
127.0.0.1 localhost loghost neptune
where neptune the local machine name, where i installed the os. Now i edited the /etc/hosts file following way
127.0.0.1 localhost
175.145.135.10 neptune loghost
after saving it, i tried to ping it:
ping neptune or ping 175.145.135.10
i get error message saying "ICMP error, host/gateway unreachable"
Does anyone have idea how to do networking in x86 running on Solaris 7???
thanks
PranozHi Allen
thanks for your help. I did that, but still it did not ask me for ip address or any network info. Then i tried to manually update /etc/hosts file with following lines it:
127.0.0.1 localhost
175.165.155.10 neptune loghost
After that i rebooted the machine and tried to
1. ping 127.0.0.1
2. ping neptune
3. ping 175.165.155.10
#1 returns "127.0.0.1' is alive. But #2 and #3 return following message:
ICMP Net unreachable from gateway localhost (127.0.0.1) for ICMP from localhost(127.0.0.1) to neptune(175.165.55.10)"
Does anyone has any experience/idea about how to configure network with solaris 7 on Intel platform??
Your help is grealty appreciated
thanks
Pran -
Install guest OS Solaris 10 no network connection
Hi,
I tried to install Solaris 10 as guest OS on Oracle VM. During the installation of OS, it bypass the step prompt for network connectivity (yes/no) screen. (I tried many time install and re-install over and over again, but the network connectivity prompt screen never show up.)
I finished the installation anyway, the OS seem working fine. But the problem is I don't know where to enter the network info, and therefore, no network connection.
So, please help.
Thank you,
WeiWindows uses the primary partiton for boot, too, even if you installed it on the NTFS volume in the extended partition. Wherever you install Windows, it will need the primary partition for booting. You can never boot from Windows extended partitions
As for the 15Gb raw partition, it look like what you call 'RAW partition' is actually just a small little part inside the extended partition. All your NTFS partitions (and your RAW partiton) are logical volumes and they all reside inside the extended partition. Even though Windows sees them as separate drives, each with its own drive letter, just as it sees the primary partition.
You may try do use Windows fdisk or diskpart to delete the last logical volume in the extended partition, and then get the ntfs resize tool from Linux, or the CD1 from the Debian Linux install CDs, which has it included and accessible with a nice user interface, and resize your extended partition.
I don't know if it works, I only used it to also resize some logical volume inside the partition. ntfs resize tool might not be easy to work with, you will need to read its documentation, but it does resize NTFS partitions (I have seen it).
If it works, then you will have your 15Gb as unallocated space available for a new partition. Let the Solaris installer create this new partition automatically during install.
Timothy Madden,
Romania -
The full message said:
There was a problem downloading the software for the iPhone "Judy's iPhone 4". The network connection was reset.
Make sure your network settings are correct and your network connection is active, or try again later.
I am trying to update the iPhone for my grandmother, Judy, as I am leaving for Paris on Wednesday night and we want to have Facetime installed on her iPhone before then, so we can stay in contact with each other. It is the simplest way for this to happen but the program simply will not allow me to update her iPhone.
Is there any way to get past this error and update her iPhone? Any help will be greatly appreciated.Dear Jody..jone5
Good for you that can't update your iphone because I did it and my iphone dosen't work for example I can't download any app like Wecaht or Twitter..
Goodluck
Atousa -
I keep getting an error message when trying to log on to FaceTime and iMessage on my iPad mini with wifi...Could not sign in. Please check your network connection and try again. Help!
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
Cheers, Tom -
is anyone else having trouble setting up messages with the new mountain lion software? I keep getting a notification that i cant sign in and it is saying, check network connection and try again, but i have full wifi bars, thanks, Justin
Install this to get X11 functionality back in 10.8
http://xquartz.macosforge.org/landing/
Worked great for me and others.
Jerry -
When I try to sign in with my Apple ID and password, it says I can not sign in. To check my network connection and try again.
I am connected to my home wifi network. Why can't I sign in??Not sure, but iAd Producer probably has nothing to do with this.
Did you try posting in a forum that discusses iPhone, or FaceTime, or networking?
I searched and this looks like the best fit : https://discussions.apple.com/community/iphone/using_iphone
-M -
I have a Airport network at home with a Time capsule connected via ethernet cable to modem. Also the network is extended wirelessley with an Airport Extreme. I now wish to add a second Airport extreme but am considering a hard wire connection with 100 ft of cat 6 cable from the Time capsule to the second Airport extreme. Can my network operate properly to extend the network with both a wireless and wired extend functionallity?
I now wish to add a second Airport extreme but am considering a hard wire connection with 100 ft of cat 6 cable from the Time capsule to the second Airport extreme.
Excellent plan.
Can my network operate properly to extend the network with both a wireless and wired extend functionallity?
Yes, but don't get confused about the second AirPort Extreme, as it would not be configured to "extend" a wireless network.....it would be configured to "create a wireless network" using the same wireless network name, security settings and password as the Time Capsule network. Configure the second Extreme in Bridge Mode.
This Apple support document will show you how to hookup and configure the second AirPort Extreme:
http://support.apple.com/kb/HT4260 -
I am trying to update my phone so I can save my info on my old phone & get a new phone, but I get a error that says "There was a problem with downloading teh software, the network connection timed out.." HELP! Not sure what my settings shoud be...
I never updated anything until now...I want o update my iPhone to the newest version, but i do not want ot loose all that I have on this phone. I was told I needed to update the operating systems so i can put things into the cloud for transport to new phone, but I am just not sure how to do this..Can you help out here??Dear Jody..jone5
Good for you that can't update your iphone because I did it and my iphone dosen't work for example I can't download any app like Wecaht or Twitter..
Goodluck
Atousa -
After updating my Iphone 4s to os 7.1.1 from 7.1 over the air, my phone went into recovery mode. Yet when I try to restore it with Itunes on my windows 7 laptop it says the network connection has been reset. Make sure your network settings are correct and your network is active, or try again later. My phone has the itunes logo and charger symbol on it, as well as an arrow pointing at the Itunes logo. After holding the sleep button down or even doing the hard reset the same screen comes up on my phone regardless of whether it is plugged in or not to my computer. I have turned my computer off and on again. It is plugged in and charging as it's battery life is very short. I also reset my modem and the same error message pops up. The only option on my computer when my phone is plugged in is to restore it. My firewall also allows Itunes through it. I have literally tried everything I know being someone who knows very little about technology. I also do not want to hear about how the update worked for other people. My phone has been in recovery mode for 5 hours at least now so it will just make me more frustrated if a bunch of people post about how the update worked for them.
Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
kevinpowell1 wrote:
how can i get it out of recovery mode?
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Then See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
Some users have reported as many as 8 or 9 attempts were necessary before success.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
If the issue persists...
Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first... -
My itunes account on windows xp shuts down for no reason. If even try to delete something from my library it shuts down. It wont recognize my iphone and there is an issue with network connectivity and I can't connect to the store. I have already reinstalled itunes and did a system restore on my computer, firewall has been checked, itunes is ok on firewall and virus scan done. Ideas??
Same problem. I can see the itunes store so not a problem with windows firewall. The account is active on my iphone so i know i am not locked out. I can connect the PC to my iphone so i know itunes is working ok. It is just logging into itunes on this pc which doesn't work. Only thing I can think of is that the email address I use for my apple id has been offline for a while and is working again now, I'm wondering whether this has been the case for others who are having this issue?
-
I am cannot access the iTunes store via iTunes on my PC and also can not update to 10.6.3. It keeps telling me that my connection has times out and/or check my settings. There is nothing wrong with my setting. I am also having trouble with the app store on my iPhone 4s and can not update apps.
I have signed out of itunes and now cannot sign in again.I feel you pain i'm haveing the same problems here.
iTunes could not connect to the iTunes Store. The
network connection timed out.
Make sure your network settings are correct and your network
connection is active, then try again.
does anyone plz have some insight for us. -
LaserJet Pro 200 color MFP m276nw no network connection with Linksys HUB
Hello
I've setup my LaserJet Pro 200 color MFP m276nw to connect to my home network using a wired connction.
When connected directly to my router the connection initializes and successfully recieves an ip address. I've been able to access all the network function connected to my router directly either wired or wirelessly.
I also have an old Linksys hub and when the printer is connected to the hub, it does not initialize the network connection. The hub works with every other sevice in my network, including a few game consoles and a Mac Mini.
Is there an advance network setting I should be looking at?
Thank you
This question was solved.
View Solution.Hi,
Remove any wired connection before attempting to connect via wireless.
Print off the printers network configuration and check the settings against your routers settings.
Ensure that router and printer are using the same frequency.
Review this HP posted information once you have the above information in hand.
This information might also be helpful.
Review page the wireless setup information starting on page 115.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT
Maybe you are looking for
-
How do I update my ipod touch with my new email address for my itunes account?
How do I update my ipod touch with my new email address for my itunes account? I recently changed my email address and updated it on my itunes account but now my ipod keeps asking me for the password associated with my old email address.
-
USB 3 external drive volume not mounting on restart
I've bought an external USB 3 full size hard drive enclosure case and put in a 2TB drive. The drive is partitioned into 3 volumes. I've noticed from time to time that the volumes have gotten dismounted some how. If I unplug the USB cable and plug it
-
SAP experts, I need to find a JE report with the following columns in particular for the client. I know I can go to FB03, S_ALR_87012286, S_ALR_87012287 and S_ALR_87012289, but I am not a able to get a simple reports with these columns. Company code,
-
Using iWeb on other servers than dot MAC?
Can people confirm that one can use iWeb with other servers than Apple's dot Mac site? The fine print says: *iWeb publishing requires Internet and webserver access (.Mac recommended). So from that I guess it is feasible but is it easy to set up? Than
-
My co-worker and I both use MacBooks and are running 10.5.2. She gets her custom signature to show up in stationary templates and I don't. We also created a custom stationary style and neither of us can get a signature in that template. Are there any