Network coverage drops in and out after upgrading iPhone 4s to ios5.1, Network coverage drops in and out after upgrading iPhone 4s to ios5.1, Network coverage drops in and out after upgrading iPhone 4s to ios5.1
Can anyone please tell me what I can do to fix the following problem....I updated the software to ios 5.1 two days ago and since then my network coverage drops in and out. Very difficult to make recieve calls with this happening every few seconds and near impossible to use the Internet. I have contacted support but got no support as 90 days had just ended. I have researched this problem all over the Internet and am now aware that I am not the only one with this problem after the upgrade. I have reset many times and read every post and still there are no answers...Can anyone please help? I'm trying to run a business and it's impossible with the phone doing this now.
I have been having the same issue for the last two weeks. No real indication as to why it ever began other than I had turned off my router and Airport Extreme Base Station off for a weekend while I was away from my place.
iPad, iPhone, iPod Touch, all have no issues at all with my Airport Extreme Base Station. Can stay connected throughout my living room, bathroom, bedroom, no issues whatsoever.
My 5 month old MacBook Pro 2.66 GHz Core i7 Airport is sometimes perfect, able to connect, DHCP, and browse without issue. Then, for no reason, I won't be able to join my wireless network, or when I can join, I can't pick up an IP address. And then it will connect, pick up and IP, and then it won't browse. No real rhyme or reason to when this will happen, or when it works.
I thought that it was an issue with my MacBook Pro, but then my sister visited with her brand new MacBook Pro 2.26 Intel Core 2 Duo, and while a month ago she was able to connect, DHCP, and browse without issue, this weekend she had all of the same issues I was having.
My XBOX 360 and MacBook Pro have absolutely no issues with the wired connection. Only my WAN seems to have this issue.
Did you ever find anything more to this?
Similar Messages
-
I have iPhone 4. After I upgraded to ios5 I have a problem with Wi-Fi connection with "WPA enterprize" protection. I can define the connection and everything works fine. But after I lose signal or shutoff the WiFi, I cannot re-connect, and need re-define the net. It is only in WPA enterprize.
Thanks,
EyalI tried this! Somebody suggested it in another thread. It did not work, sadly.
-
After upgrade to ios5, none of the apps will load. Touching an icon does not open the app; it just blinks and returns to the screen.
Go to the App Stor and download an app- any free app will do, it doesn't matter.
Doing this usually "resets" your device's "app awareness" and you should be able to run any app with no problem.
And no, you don't have to keep that free one you just downloaded. You can delete it if you don't want it. -
I’m unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK – and only fails when I write from iTunes. The drivers are up to date
Microsoft Windows 7 x64 Business Edition Service Pack 1 (Build 7601)
Dell Inc. Latitude E6420
iTunes 12.0.1.26
QuickTime 7.7.6
FairPlay 2.7.39
Apple Application Support 3.1
iPod Updater Library 12.0
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 8.0.5.6
Apple Mobile Device Driver 1.65.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 3.06.0.2770
Gracenote MusicID 3.06.0.2770
Gracenote Submit 3.06.0.2770
Gracenote DSP 3.06.0.2770
iTunes Serial Number 756D13C00C3583C8
Current user is not an administrator.
The current local date and time is 2015-01-13 14:47:35.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Intel(R) HD Graphics Family
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 12.0.1.26 (x64) is currently running.
iTunesHelper 12.0.1.26 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
LowerFilters: SbCeCd (3.2.6.3),
UpperFilters: GEARAspiWDM (2.2.3.0),
F: HL-DT-ST DVD+-RW GU40N, Rev A103
Drive is empty.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.
F: HL-DT-ST DVD+-RW GU40N, Rev A103
Audio CD in drive.
Failed Reading table of contents, error 4000.
Check the website of your computer or drive manufacturer to verify that you have the latest firmware for your CD / DVD drive.
Audio CD reading failed. Error Code: 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87.
iTunes cannot play or import music from a CD in this drive. The drive may need a firmware update. Check with the manufacturer.
Get drive speed failed. Error Code: 4000.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.Hi iTunes-1,
Welcome to the Support Communities! The error message you posted indicates a possible firmware update is needed for iTunes for Windows to work with your CD drive.
iTunes for Windows: Updating the firmware on your CD or DVD drive - Apple Support
http://support.apple.com/en-us/HT201852
Having outdated firmware can cause issues using CDs and DVDs with iTunes for Windows. Firmware is a type of software stored in a chip in hardware that can sometimes be updated.Identifying drives and firmware versions
To run CD Diagnostics, follow the steps in this document.
After following the steps to run CD Diagnostics linked above, look at section three to find out more about your optical drive(s).
Here is an example of what section three might look like:
In this example there are two drives. Drive E is a Samsung DVD-ROM drive with a model designation of SD-616 that has firmware version F000. Drive F is an NEC drive with a model designation of NR-7900A that has firmware version 1.08.Updating the firmware
If the optical drive you are using came with your computer, check with the support site for your computer for a firmware update. Typically you will need to go to the support website for the computer maker and click on a "downloads" or "updates" link, and then enter your computer model designation and operating system version to see what updates are available. Then look through the available updates for a firmware update for your optical drive. Download the updater and run it. If you need assistance applying the update, contact the maker of your computer.
If the optical drive you are using came as a separate part (was not included with a computer), check the support site for the drive maker for a firmware update. Sometimes the manufacturer is not clear in the CD Diagnostics results. In that case, you may just have to search the Internet for the drive model designation. You can usually find out who made the drive by looking through the results of such a search. Once you have identified who made your drive, go to the support website for that company. Look for a "downloads" or "updates" link, and then enter your optical drive model designation. Download the updater and run it. If you need assistance applying the update, contact the maker of the optical drive.Verifying that the firmware was updated
Run CD Diagnostics again.
Examine the CD Diagnostics results. The firmware version for the drive should be the new version.
Information about products not manufactured by Apple, or independent websites not controlled or tested by Apple, is provided without recommendation or endorsement. Apple assumes no responsibility with regard to the selection, performance, or use of third-party websites or products. Apple makes no representations regarding third-party website accuracy or reliability. Risks are inherent in the use of the Internet. Contact the vendor for additional information.
Last Modified: Nov 8, 2014
Also, you mentioned that you have been successful burning a CD with the Windows OS. Make sure that you have closed all software programs that can access the CD burner so that there isn't a conflict for the drive. Sometimes chaning the burn speed from "maximum" to 8x can also help in this situation.
I hope this information helps ...
- Judy -
It takes 8 hours to download the new upgrade for my phone. Then after 8 hours downloading it says sorry there was an interuptions of some sorts. this is rediculous. ive tried 3 times, eating my cap and still no results.. seriously what must i do? Been an anyone help....
Hi there, thanx for the quick reply.
Ok the error code after 8 hours of downloading said error code 9006. I’m not too good withcomputers and I’m really battling with this. And tell me is it really necessary to download update 4.3.3... If I’m having so much trouble it really makes me deponent to try and try again...I have the iphone 4 16 GB 4.3 (8F190) version. Model MC603SO. Itunes10.2.2.14...
And why does it take 6 – 8 hours?
Hope you can help
Kind regrds -
Printer connected to Airport Express USB port won't come online after firmware 7.6 upgrade. I've tried backing up to 7.5.2, but it still shows offline. It is a Canon iP4600 printer and I'm running OS 10.6.8. I've powered everything down and still no go. I've connected the printer directly to my MacBook's USB port and it works fine. Any suggestions?
I have an iP4500, which I assume is quite similar to your model.
I had to reset the printing system to get things printing again. Only takes a few minutes and no problems at all since I did it a week ago or so.
Plug the printer into the USB port on the Express and restart the printer.
Open System Preferences (gear icon on the dock) and then open Print and Fax
Right-Click in the printer area on the left and select Reset Printing System
Then click the + (plus) button at the bottom of the printer list to install the printer again. -
hi i updated my iphone 4 with itunes and now i cannot use my phone as i keep getting error 16 after trying to restore my phone....i cannot afford to replace ..can any body help me...the phone is out of warrenty so apple do not want to know....please any help
https://discussions.apple.com/message/23100453#23100453
more hits from the search
https://www.google.dk/search?q=restore+itphone+error+16&oq=restore+itphone+error +16&aqs=chrome..69i57j0l5.11485j0j7&sourceid=chrome&espv=210&es_sm=93&ie=UTF-8 -
Hi Apple Community,
This is my first time using the Apple Support Communities. After installing/upgrading to snow leopard from disk will I lose my data and my third party programs like Adobe Indesign?
Thank you in advance,
JohnJohn... welcome to ASC,
You could if you don't backup everything to an external drive first. Always backup your important data before upgrading from one Mac OS to the next.
"Backup" most important word in computing
Make sure your Mac meets Snow Leopard's minimum requirements before upgrading > Mac OS X v10.6 Snow Leopard - Technical Specifications -
after updating my iphone 3gs from os 4 to os 5.1.1, it left with activating the phone but i've been trying since and is still not activating, the notification given is ''activition server temporarly unavilable". can somebody help me out?
First use JPanel not Panel.
Panel panels[]=new Panel[4];becomes
JPanel panels[]=new JPanel[4];Then refactor your code so that you use arrays correctly:
panels=new Panel();
panels.setLayout(new FlowLayout(FlowLayout.LEFT));becomes
panels=new JPanel();
panels[i].setLayout(new FlowLayout(FlowLayout.LEFT));
I did the above changes to your code and it worked fine.
Dave -
After the last update of the iPhone 5.1 sound became low tones specifically entered into the settings and made the maximum sound d, but to no avail there is no update for this problem Haddl Is it possible to delete the Japanese language and take advantage of memory storage space
Osmhto tried to solve the problem of low sound we have become we do not hear a tone sounds clearly like the first phonehello...
I am having the same issue here... just upgraded my 5s to 7.1.1 (never jailbroken - factory unlocked) and then boom... NO Service!!! Searching ... that's it. currently using Smart Telecom Sim... at first it was working for me... after 6-7 hours, it started the No Service issue. I cannot send a text or make a call...
I did the steps you have taken but it is still not working... any updates on your end? -
Problem: this mac is not reading an excell file after upgrading to yosemite. My Mac is from 2009, it use to work perfectly but it wasn´t able to open some apps, thats why i upgrade it. Now it once i donwload the zip it appears with an ".ods" extension
i even already download a link
http://www.microsoft.com/en-us/download/confirmation.aspx?id=44026
which i read on another support page... but it doesnt allowed me to install it cause it says that i already have the disk of this program....
Im afraid to erase it and not being able to get it back...
What can i do!??
Thanks in advance for this kind answer!!!fsolution wrote:
Problem: this mac is not reading an excell file after upgrading to yosemite... Now it once i donwload the zip it appears with an ".ods" extension...
If the "it" refers to a compressed (zipped) spreadsheet that you downloaded, the ".ods" extension is used by LibreOffice and probably OpenOffice (which are free versions of MS Office) for spreadsheets, which would suggest that wherever you're getting that "Excel" file from has switched to one of those programs. I've tried opening an .ods file from LibreOffice using MS Office 2013 for Windows and it does open though with a warning that some things have been changed. I don't know if Office for Mac can normally open .ods files. But if your need is to just open .ods files, take a look at LibreOffice. -
My wife and I got Iphone 4S same day 2 years ago. I used the same Apple ID for both. We do not use iCloud, but today after I updated my phone to IOS7 I keep getting her texts on my phone ans vice versa. I turned off imessage in message settings. Seems to have stopped now? Never did this before IOS7. Will I have more troubble when her phone updates to IOS7? Is icloud going to be forced on me then?
This is being caused by using the same Apple ID for iMessage on both phones. To separate your messages, go to Settings>Messages>Send & Receive and do one of the following:
Either uncheck the email address shown under "You can be reached by iMessage at" on both phones; or
If you want to continue to receive iMessages at this email address, on one of the two phones, tap the Apple ID at the top, sign out, then sign back in using a different Apple ID. -
I can turn the iPhone off by holding down the power button and releasing when i see the blue screen. I have tried to restore the iPhone in iTunes by putting it into recovery mode, but after about 10-20 minutes of it restoring the iPhone suddenly looses connection with the computer and goes back into the loop process. What should i do?
Hello Simmo1997,
Sorry to hear about your issue but let’s see if we can get your iPhone back up in running. If your iPhone is disconnecting when trying to restore then check out the article below to get you started with isolating the issue. Let me know if it gets resolved or if you discover a new symptom.
iTunes: Resolve USB-related alerts
http://support.apple.com/kb/HT5772
Regards,
-Norm G. -
I have cs4. Had to rebuild my mac OS after malware infected it. Now getting an error code 150:30 when trying to open PS. Can this be fixed or do I have to upgrade to cs6?
150:30 means licensing is broken. It's a common CS4 error. On Macs it usually happens when Photoshop is retrieved from backup or migrated from another Mac. Photoshop is never meant to be moved that way. As advised, you should uninstall and reinstall from your discs.
Sine reinstall only apply the base install and the CS4 Help > Update function is outdated, you will have to manually download and install your updates from here: Product updates for Bridge and Photoshop.
Gene -
i upgraded my iphone 4 OS yesterday to ios 5, today morning my phone is not working, i am not able to click any button and also its not allowing me to switch off the phone and restart. Anyone having similar issues?
From my post on what seems like the same issue (found here: https://discussions.apple.com/message/21087892#21087892)
Take the following steps:
1) while connected to wifi, toggle off then back on the Show All Music and iTunes Match options shown in my original post. Important: I did this step before, but wasn't connected to wifi, and my music disappeared. Subsequently, I connected to wifi and turned off and then back on those options and everything came back though it was grayed out and my only option was to download music.
2) To get streaming over cellular back, go into Settings>General>Cellular and scroll down to the "Use Cellular Data for:" options and make sure the iTunes option is set to 'On'
The above steps will bring back the streaming capability which seemed to go away when you update to 6.1. It didn't ACTUALLY go away, but something about the update toggled off the iTunes option in step 2 above.
I did a final test by turning off wifi, opening Music app and selecting a song. It played successfully without downloading! Crossing my fingers, but I think I'm good to go!
Hope this helps! -
hi All.. i want to use my iphone 4 to play poker on facebook with the zynga.. idont know the apps name,, thank's for ur help, and how to upgrade ios 4.3.3, now i'm still using ios 4.1.1, thank's
when you connect your phone with your computer and use itunes you can click on the phone
and click on an update button
about facebook games then think they are all flash based and iphones cant do flash so thats not possible
Maybe you are looking for
-
"Error writing metadata to" when applying keywords
This is the initial post of the thread in this new forum, as requested. A link to the history of the issue is here. In a nutshell, this thread documents the irritating and difficult-to-track-down issue where Bridge is unable to write metatdata to a f
-
Hi all , I am trying to extend VO in R12 for that i am getting bellow error Each row in the Query Result Column must be mapped to a unique Query Attribute in the Mapped Entity column. I am not even modified the Base Vo just trying to extend base VO (
-
Backup Database using MSSQL Studio with Retention Period
Hi Experts, I Want to run backup every first Monday of the month and only keep 2 copies, which means after third month successful backup first month should be deleted. I know how to schedule the backup for first monday of every month. My only query i
-
Facebook like button integration after Facebooks July '13 migration
I am trying to add a like button to blog posts at jayowenhouse.com. I am following the instructions here http://kb.worldsecuresystems.com/kb/add-social-media.html#main_Obtaining_the_plugin_code_ Even using {tag_itemurl_withhost} the "like" button "li
-
I purchased the extra data last month as I was getting close to my limit which has never happened before. I added the extra 1gb for $10. I now want to remove that but cannot see how to take it off. Also would like to know can you use this feature wh