Network events and callbacks (netrwork available/unavailable)

Is it possible to subscribe on network events in java such as "network connected", "network disconnected" or something else?
Similar to MS ISeneNetwork COM (http://msdn.microsoft.com/en-us/library/aa377384(VS.85).aspx) but platfom independent.
It would be very useful feature in network programming but unfortunately I couldn't find this or something instead in java.net package...

I can't imagine why that would be useful, I haven't ever seen a use case for it. But if Microsoft provides it then presumably somebody somewhere must have thought it was useful.
Anyway you could certainly write some JNI or JNA code which subscribes to those events and returns them to your pure Java code. Of course that wouldn't be platform-independent, but then I expect that there are platforms which don't have any such APIs.

Similar Messages

Callback function for network events

Hi all,
I'm working on a project, and I need to be able to respond to network events. I receive the data through a BufferedInputStream from a socket. What I want is a callback-type thing, i.e. When new data is sent to the socket, a function is called to receive that data. I've looked through the documentation, I can't find anything that could be used for that. The only thing I can think of is linking it to a JTextArea/JTextField, and attaching a change listener to that, but I'd prefer not to have to do that. My current method involves a loop, which I don't like at all:
while (true) {
if (server.Available()) {
do stuff here
I don't like it because it wastes processor cycles that really should go elsewhere. So what can I do?
-ReKleSS

When you read from a socket and there is no data available, it just blocks until something does become available. While the thread is blocked waiting for I/O it won't take up any processor time.

I am trying to delete an XLS file from a network drive and am getting a message that says the file cannot be deleted because it is in use. I can't see where it is in use and have tried to reboot the computer to no avail.

I am trying to delete an XLS file from a network drive and am getting a message that says the file cannot be deleted because it is in use. I can't see where it is in use and have tried to reboot the computer to no avail. I can delete other files but several XLS files are giving me this message.

You said it was a network drive. So is someone else on the network using that same file or may have have left with excel still accessing it on their system?

'"Connection Failed" : The server "rrnas01" may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again' message

'"Connection Failed" : The server "rrnas01" may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again' message keeps displaying whenever I try to open any Adobe CS5 applications (except for Adobe Acrobat Pro). It displays until I click "OK" about 15-20 times or so and then will finally let my program open.
I have tried deleting files within my Library/Preferences folder and turning off/deleting login items within my system preferences as other forums suggested but nothing happened. Spending 3.5 hours on the phone with Adobe and completely uninstalling and then reinstalling the entire CS5 Master Collection didn't work either.
Also, it may be helpful to know that my programs worked fine for about three weeks then when we got internet and changed the password (the join, not the adminstrative password) with the wireless network "ScubaSteve" (which I've used with no problems at my old apartment) it started acting up. I have never seen "rrnas01" before so I don't know at all where it came from. I also installed the free 30 day trial of Suitcase Fusion 3 recently, but thinking that could also be the cause I have uninstalled it, and still no help.
Please help me! And please keep in mind I don't know all the computer lingo that a lot of the people in these forums seem to know. Thanks in advance for ny help you can give me.

It may not be possible .. there is a major bug between Mountain Lion and the TC where the TC disk goes off the radar of the computer.
Lion is also affected but not as badly.
7.6.4 seems worse than earlier firmware.. so back to 7.6.1 or 7.5.2 if that is possible.
Obviously that is not a solution for a later Gen5 TC.
Reset to factory after the firmware downgrade. .use all network names that are short, no spaces and pure alphanumeric.
If the TC is the main router set the dhcp to a very short lease time.. eg 30min.. and see how it goes, or try a longer lease like 99days.
I prefer the very short lease but response has been mixed.
Use ethernet not wireless.. ethernet is always more reliable and stable than wireless.
And last .. a nightly electric timer that powers off every night at midnight for 1min.. would not be the first device we have suggested a fix that amounts to beat the unit to the punch by forcing it to reboot since it is unstable.

I am trying to use automator to open a safari popup window that will automatically log me into whatever account and I attempted to type up an applescript that utilized the "System Events" function with no avail, any ideas?

I am trying to use automator to open a safari popup window that will automatically log me into whatever account and I attempted to type up an applescript that utilized the "System Events" function with no avail, any ideas?

Hi
In iMovie'11 (version 9.0.x)
on top menu row - Apple/iMovie/File/Edit/Cut (Can vary dep. on language - in Swedish Apple/iMovie/Arkiv/Redigera/Klipp . . . )
down Cut menu - Slow playback/Raspid Playback/Re-play in Slow Motion and onvards
Here one can select the Pre-Set speeds
Are you familiar with getting 'inspector' to run?
No - but I guess that Double Click on clip/sequense or ctrl-Click on it might open it.
Yours Bengt W

Hi, I'm trying to set up my Time Machine, but I get this message: The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again. how to resolve?

Hi, I'm trying to set up my Time Machine, but I get this message: The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again. how to resolve?

Did you reboot the TC? That is always the first step.
Reboot the whole network if that is not enough.
If you still have issues.. come back to us but generally the best way is to factory reset the TC and start over.
We need a bit more info on the whole network layout and what OS you are running. What model TC you have??

Can't connect Airport Express wirelessly to network so that AirTunes and internet are available simultaneously

I can't connect Airport Express wirelessly to network so that AirTunes and internet are available simultaneously. My old AE allowed this but can't make the new one work that way.

In your instructions, you say to use the same encryption type as the router has set up. well, I am using the WEP 64 bit encryption and the Airport Utility does not have this...it has 40 bit. Is this a problem, or do I have to be using a the same type of encrytion ?
WEP is available in either 40 or 104-bit, but is usually "advertised" as either 64- or 128-bit respectively. For example, 64-bit WEP uses a 40 bit key (also known as WEP-40), which is concatenated with a 24-bit initialization vector (IV) to form the 64-bit RC4 traffic key. So, WEP 64 on the Linksys & 40-bit is equivalent.
What concerns me more is the loss of bandwidth performance you are experiencing when connecting the AX. When the AX is configured as a wireless client it is acting just like any other wireless devices (computer, laptop, printer, etc.) and not like another router. This should cause little or no bandwidth loss. True the more secure the wireless encryption used WPA2 vs. WEP, the more overhead is required for security, but the differences you are seeing seem excessive.
It is very possible that you may have some form of Wi-Fi interference in the immediate area that is preventing your Linksys from providing a good clean signal.
I suggest you perform a simple site survey, using utilities like the following to determine potential areas of interference, and then, try to either eliminate or significantly reduce them where possible:
For Macs:
o MacStumbler
o iStumbler, or
For PCs:
o NetStumbler

Every time I try to connect to my 2TB Airport Time Capsule I get the following msg - "The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and

Every time I try to connect to my 2TB Airport Time Capsule I get the following message "The server may not exist or is unavailable at this time. Check the server name or IP address, check your network connection, and then try again." However, if I unplug it and then plug it in again, I can connect to it. How can this be corrected without having to unplug it all the time?

Are you using Yosemite??
This is stock standard yosemite bug and we have no simple fix for you..
You can fix it at its source..
Hack in DNS from Mavericks.. so Yosemite can be raised to a level of reliability above GHASTLY.. !!
http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/
Apple still have not fixed it.. and users are now sick and tired of the problem.. so have resorted to what can only be described as extreme measures.. in fact I wonder why people don't just revert to Mavericks.. or earlier.. whatever OS was reliable.. instead of seeing the latest greatest update as necessity.

SQL Service Broker 2012: the connection was closed by the remote end, or an error occurred while receiving data: '64(The specified network name is no longer available.)'

Anyone can help with the below issue please? Much appreciated.
We have about 2k+ messages in sys.transmission_queue
Telnet to the ports 4022 is working fine.
Network connectivity has been ruled out.
The firewalls are OFF.
We also explicitly provided the permissions to the service account on Server A and Server B to the Service broker end points.
GRANT
CONNECT ON
ENDPOINT <broker> <domain\serviceaccount>
Currently for troubleshooting purposes, the DR node is also out of the Availability Group, which means that we right now have only one replica the server is now a traditional cluster.
Important thing to note is when a SQL Server service is restarted, all the messages in the sys.transmission queue is cleared immediately. After about 30-40 minutes, the errors are continued to be seen with the below
The
connection was
closed by the
remote end,
or an
error occurred while
receiving data:
'64(The specified network name is no longer available.)'

We were able to narrow down the issue to an irrelevant IP coming into play during the data transfer. We tried ssbdiagnose runtime and found this error:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>SSBDIAGNOSE -E RUNTIME -ID 54F03D35-1A94-48D2-8144-5A9D24B24520 Connect to -S <SourceServer> -d <SourceDB> Connect To -S <DestinationServer> -d <DestinationDB>
Microsoft SQL Server 11.0.2100.60
Service Broker Diagnostic Utility
An internal exception occurred: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
P 29830 Could not find the connection to the SQL Server that
corresponds to the routing address tcp://XX.XXX.XXX.199:4022. Ensure the tool is connected to this server to allow investigation of runtime events
The IP that corresponds to routing address is no where configured within the SSB. We are yet unsure why this IP is being referred despite not being configured anywhere. We identified that this IP belongs to one of nodes other SQL Server cluster, which has
no direct relation to the source server. We failed over that irrelevant SQL Server cluster and made another node active and to our surprise, the data from sys.transmission_queue started flowing. Even today we are able to reproduce the issue, if we bring
back this node [XX.XXX.XXX.199] as active. Since, its a high business activity period, we are not investigating further until we get an approved downtime to find the root cause of it.
When we get a approved downtime, we will bring the node [XX.XXX.XXX.199] as active and we will be running Network Monitor, Process Monitor and the SSB Diagnose all in parallel to capture the process/program that is accessing the irrelevant IP.
Once, we are able to nail down the root cause, I will share more information.

Regarding Event and Its subscription in SOA Suite11g

Hi All,
I am trying with some of the tutorials of SOA Suite 11g for EDN. I have a doubt regarding even handling in the following scenario:
Events are used for 'fire and forget' scenario and is a solution that does not depend on the underlying messaging technology. I have a composite subscribed to
an event, assume that for some reason the composite is not available when the event is raised. Then
- What will happen to the raised event? Will it be lost or will the event stored in any queue? If its stored, where this will be stored?
- And how should i take care of this composite unavailability scenario? As my requirement is doing set of activities when the event is raised, if the composite is unavailable for some
reason then the raised event will not be handled then its an issue with functional flow.
Please let me know about this.
Thanks
Siva

I was trying the same scenario, raising the event from UI but no subscribed composite exists. When i see the EDN log it was shown like below.
NewCustomer is the event and has payload of CustomerId. The log shows the entries for both enqueuing the event and Dequeued event.
Seems to be event will not be stored if no subscribers exist or may be any other settings required. Not sure though, any insights?
Enqueing event: /oracle/apps/examples/model/entity/events/edl/CustomerEO::NewCustomer from R
Body: <business-event xmlns:ns="/oracle/apps/examples/model/entity/events/edl/CustomerEO" xmlns="http://oracle.com/fabric/businessEvent">
<name>ns:NewCustomer</name>
<id>64232479-0501-4989-8be2-42930a96a1e4</id>
<content>
<NewCustomerInfo xmlns="/oracle/apps/examples/model/entity/events/schema/CustomerEO">
<CustomerId>
<newValue value="2345"/>
</CustomerId>
</NewCustomerInfo>
</content>
</business-event>
Subject name:
Enqueing complete
Starting EDN Agent for Event from Queue
Dequeued event: /oracle/apps/examples/model/entity/events/edl/CustomerEO::NewCustomer
Subject name:
Body: <business-event xmlns:ns="/oracle/apps/examples/model/entity/events/edl/CustomerEO" xmlns="http://oracle.com/fabric/businessEvent">
<name>ns:NewCustomer</name>
<id>64232479-0501-4989-8be2-42930a96a1e4</id>
<content>
<NewCustomerInfo xmlns="/oracle/apps/examples/model/entity/events/schema/CustomerEO">
<CustomerId>
<newValue value="2345"/>
</CustomerId>
</NewCustomerInfo>
</content>
</business-event>

A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - The specified network name is no longer available.)

Hi guys
i have problem when i run my windows application exe in windows server 2003
it give me this exception error :
I using sql server 2005
visual studio 2008
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.Data.SqlClient.SqlException: A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - The specified network name is no longer available.)
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParserStateObject.ReadSniError(TdsParserStateObject stateObj, UInt32 error)
at System.Data.SqlClient.TdsParserStateObject.ReadSni(DbAsyncResult asyncResult, TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParserStateObject.ReadNetworkPacket()
at System.Data.SqlClient.TdsParserStateObject.ReadBuffer()
at System.Data.SqlClient.TdsParserStateObject.ReadByte()
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlDataReader.ConsumeMetaData()
at System.Data.SqlClient.SqlDataReader.get_MetaData()
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method)
at System.Data.SqlClient.SqlCommand.ExecuteDbDataReader(CommandBehavior behavior)
at System.Data.Common.DbCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.Fill(DataSet dataSet)
at Sales.SalesClass.ShowSalesData(String ConnectionString)
at Sales.Form1.timer1_Tick(Object sender, EventArgs e)
at System.Windows.Forms.Timer.OnTick(EventArgs e)
at System.Windows.Forms.Timer.TimerNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
Sales
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/Documents%20and%20Settings/administrator.ALTAWIREADYMIX.000/Desktop/Sales.exe
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
System.Configuration
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
System.Data
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Data/2.0.0.0__b77a5c561934e089/System.Data.dll
System.Transactions
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Transactions/2.0.0.0__b77a5c561934e089/System.Transactions.dll
System.EnterpriseServices
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.EnterpriseServices/2.0.0.0__b03f5f7f11d50a3a/System.EnterpriseServices.dll
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
Why this error show and how to solve it
if possible help me
Why this exception show and how to solve it.
Notes this exception not close my application and not affect in result show but i don't know why it show

The problem can be caused by certain issues of long-running queries, which are reported improperly. Try increasing the timeout:
http://support.microsoft.com/en-us/kb/555938

Network based and a-gps, data use tests

i was trying to find this kind of info, but only found others asking.
i hope this is useful info for others, especially while roaming.
skip to the bottom for conclusion,
this is the process i took:
i called nokia tech support,
their phone support his horrible,
the people on the phone don't actually know anything, and have to look up everything you ask them.
they were the worst.
i emailed nokia tech support.
my message was:
"i would like to know the difference between assisted gps positioning, and network based positioning. these are 2 of the 4 options on my nokia e66 for positioning methods. i would like to know if network based positioning uses internet data from my service provider to obtain my gps position. i am especially concerned with this function while i'm roaming internationally, as i do not want to be charged for roaming data use."
in about half hour they responded w/ an answer, and then 45 min after that someone else responded w/ an answer.
the first response, minus the hello's etc. was:
"In response to your email, Assisted GPS and Network Based positioning methods generate costs related to data traffic so you will be charged for data use. Only "normal" GPS and Bluetooth GPS do not generate additional costs related to data traffic.
Normal GPS is quite slow and does not work indoors. Therefore, it is recommended to enable at least A-GPS to get a faster position outdoors.
Network based and Wi-Fi positioning also allow you to update your position inside buildings, but they cannot be used for navigation."
the 2nd response was:
"In response to your inquiry, the difference between Assisted GPS positioning (A-GPS) and Network based positioning is that, A-GPS uses satellites while Network based positioning is based on information of your cellular network environment. It allows you to update your position inside buildings, but they cannot be used for navigation. Both positioning methods generate costs related to data traffic (unless you have configured the device to use Wi-Fi connection to make the internet connection). The cost may vary while you are on roaming. Kindly contact the service provider for information about data transmission costs."
i can also respond w/ more questions, but instead did some tests, starting with sitting home, indoors, and eventualy moving to a window w/ lots of sky.
test 1:
i enabled:
integrated gps
network based
assisted gps
opened maps,
set maps to be offline,
set default internet access point to my home wlan network,
closed maps,
cleared all counters and the log on the phone's communication log.
opened maps
there is a pink circle around the area i may be in,
the icon that would show gps satellite strength, changes to show the cell phone antenna icon.
but the packet data counter is sending/receiving a total of around 3-8kb immediately, and over the course of time, it keeps adding up, every 1-2 minutes, and it is shown as packet data to/from the access point "at&t internet"
over the course of ten minutes, it's been about 43kb.
and i can tell on the phone's home screen that the packet data connection becomes active when it does.
the maps kb indicator still says 0.0kb, with a line through the double arrow packet data symbol.
test 2:
now i exited maps,
cleared the counters and logs
i turned off a-gps.
enabled only integrated gps and network based.
i open maps,
the same thing is happening as with the assisted gps on, except i connected to my home wlan once, in the middle of connecting to at&t internet 10 or so times.
everything else is happening the same.
test 3:
i exited maps,
cleared the counters and logs.
enabled only integrated gps.
i open maps, and there is no evidence of packet data connection, or wlan connection.
nothing is showing up in the logs or packet counters, and there is no pink circle around where i may be.
if i set maps to go online, w/ my wlan as the access point, or at&t internet, their respective icons show up on maps, as well as the phone's home screen.
the phone's log show respective connections are made but w/ 0.0kb, and the phone's packet counter, as well as the maps kb usage, say 0.0kb.
test 4:
set maps to offline, w/ my wlan as access point.
exited maps,
turned phone off for a bit to test gps from cold start.
turned on phone,
cleared counters/logs,
enabled only assisted gps and integrated gps.
open maps, there's no pink circle around where i may be, just the red dot of where it thought i last was.
there's about 4-5kb of data transfer,
then i bring the phone to the window where there's a lot of clear sky, and my location is found pretty fast.
i know that w/o assisted gps, w/ only integrated gps, it takes a while to get the gps signals.
i went back and forth to/from the window, and there was packet data use again only once more, not continuously like w/ network based positioning.
so to conclude my tests,
setting the maps to be offline, still uses a-gps and network based positioning.
network based uses a more data, continuously,
which is the opposite of what i thought, i thought a-gps would use more, so i was using network based on and a-gps off while in canada. whoops.
using assisted gps uses about 5-10kb, which, when roaming, according to at&t, they charge 1.95cents/kb.
might be worthwhile for getting a quick gps signal, nothing worse than waiting forever for it to connect.
the only way to be completely clear of data use is disable network based and assisted gps, or set the phone to offline mode.

A-GPS: This uses information from cell network to get a rough idea of where you are. It then uses this information to figure out which satellites to look for. Result is a faster satellite lock. So A-GPS uses a few kB of data to get an initial position, but navigation is done using GPS satellites, which does not require ANY data connection.
Network based: This uses information from the cell network to plot the current position when GPS satellite signal is not available, ie indoors, in a tunnel, etc. Position info derived from the cell network is not as accurate as that from GPS satellites, but serves as a stopgap until GPS signal can be re-acquired. Network based positioning used your data connection EACH TIME the satellite lock is lost. So the amount of data used is dependent on the quality of access you have to the GPS satellites. If you don't lose the connection to the GPS satellites, then you won't use any data.
The ‘offline’ option within the Nokia Maps app only refers to street, POI, etc searches, NOT to A-GPS, Network based positioning or to connecting with the GPS satellites.
If you want to navigate without using ANY data connection, set A-GPS off AND set Network based positioning off AND set the Internet option in Nokia Maps to Offline. Do this and you will not use any of your data connection allowance when navigating. There is no need to put the phone into flight mode.
If I've helped you, you can thank me by clicking the green 'kudos' star on my post. Cheers.

Losing network connection and NIC acts weird from warm/hot weather/temperatures?

Hello.
Is there a known issue on MSI P43 NEO3-F (MSI-7514) motherboards' onboard RealTek RTL8168C (P)/8111C(P) PCI-E Gigabit Ethernet NIC network disconnecting and acting weird during warm/hot weather?
I noticed lately and back on 1/11/2009 night when weather got warm/hot (e.g., my room can get over 85F degrees, but lately it has been 80F degrees), my network would lose its connection. See http://img9.imageshack.us/img9/5580/screenshots.gif for a few SpeedFan's sensor readings when the incidents occurred. I have never seen this happen when the weather is cooler (60-70F degrees in my room).
I also think this only happens if I am using the PC lightly (nothing intensive) like watching fullscreen videos (video overlay), surfing the Web, etc. I don't see any errors or evidences that it happens when idled (e.g., asleep or out). Uptime doesn't seem to matter since I have seen days to 3.5 hours.
I tried upgrading network driver twice (e.g., Realtek_XP_5714_0219 from
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=13&PFid=5&Level=5&Conn=4&DownTypeID=3&GetDown=false ...), disabling Kerio Personal Firewall v2.1.5 (XP's disabled already), releasing and renewing IP address (works, but still no network -- can't even ping my router!), unplugging and replugging the cat5 cable (do see the network port lights on), touching the network jack and hardware inside and outside of the case (not hot), trying another cat5 cable and a network port on a switch instead router's), changing from "Minimal Power Management" to full power (no underclocking/slowing down when idled), etc.
During the disconnections, I tried:
C:\>tracert 192.168.0.1
Tracing route to 192.168.0.1 over a maximum of 30 hops
1 * * * Request timed out.
2 * * * Request timed out.
3 * * ^C
IPCONFIG.EXE /ALL when having network problems:
Windows IP Configuration
Host Name . . . . . . . . . . . . : FOOBAR
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter VMware Network Adapter VMnet8:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet8
Physical Address. . . . . . . . . : 00-50-56-C0-00-08
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.134.1
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Ethernet adapter VMware Network Adapter VMnet1:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet1
Physical Address. . . . . . . . . : 00-50-56-C0-00-01
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.80.1
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Ethernet adapter HDTV Tuner 2:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : TechniSat DVB-PC TV Star PCI #3
Physical Address. . . . . . . . . : 00-D0-D7-30-19-C1
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 169.254.178.3
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
DHCP Server . . . . . . . . . . . : 169.254.178.1
Lease Obtained. . . . . . . . . . : Saturday, February 28, 2009 6:55:04 PM
Lease Expires . . . . . . . . . . : Monday, July 13, 2009 11:28:08 PM
Ethernet adapter HDTV Tuner 1:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : TechniSat DVB-PC TV Star PCI
Physical Address. . . . . . . . . : 00-D0-D7-30-1A-1D
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 169.254.178.4
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
DHCP Server . . . . . . . . . . . : 169.254.178.1
Lease Obtained. . . . . . . . . . : Saturday, February 28, 2009 6:55:21 PM
Lease Expires . . . . . . . . . . : Monday, July 13, 2009 11:28:25 PM
Ethernet adapter Local Area Connection 15:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC
Physical Address. . . . . . . . . : 00-21-85-1A-C6-72
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.0.82
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1
DNS Servers . . . . . . . . . . . : 192.168.0.1
4.2.2.1
I checked Windows XP Pro. SP3's event logs and noticed these during the disconnections:
Event logs showed:
Event Type: Information
Event Source: Tcpip
Event Category: None
Event ID: 4201
Date: 2/28/2009
Time: 6:42:23 PM
User: N/A
Computer: FOOBAR
Description:
The system detected that network adapter \DEVICE\TCPIP_{51FDDE0F-0935-416E-8FE0-3E1A50847D41} was connected to the network, and has initiated normal operation over the network adapter.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 00 00 00 00 02 00 50 00 ......P.
0008: 00 00 00 00 69 10 00 40 ....i..@
0010: 02 00 00 00 00 00 00 00 ........
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 00 00 00 00 00 00 00 ........
Event Type: Information
Event Source: BROWSER
Event Category: None
Event ID: 8033
Date: 2/28/2009
Time: 6:47:22 PM
User: N/A
Computer: FOOBAR
Description:
The browser has forced an election on network \Device\NetBT_Tcpip_{89F40100-0D8D-4C33-A32D-3D91CAEB3FBD} because a master browser was stopped.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Event Type:   Information
Event Source:   Tcpip
Event Category:   None
Event ID:   4201
Date:      3/1/2009
Time:      6:19:08 AM
User:      N/A
Computer:   FOOBAR
Description:
The system detected that network adapter \DEVICE\TCPIP_{51FDDE0F-0935-416E-8FE0-3E1A50847D41} was connected to the network, and has initiated normal operation over the network adapter.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 00 00 00 00 02 00 50 00 ......P.
0008: 00 00 00 00 69 10 00 40 ....i..@
0010: 02 00 00 00 00 00 00 00 ........
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 00 00 00 00 00 00 00 ........
Event Type:   Information
Event Source:   Tcpip
Event Category:   None
Event ID:   4201
Date:      3/1/2009
Time:      6:19:20 AM
User:      N/A
Computer:   FOOBAR
Description:
The system detected that network adapter \DEVICE\TCPIP_{51FDDE0F-0935-416E-8FE0-3E1A50847D41} was connected to the network, and has initiated normal operation over the network adapter.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 00 00 00 00 02 00 50 00 ......P.
0008: 00 00 00 00 69 10 00 40 ....i..@
0010: 02 00 00 00 00 00 00 00 ........
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 00 00 00 00 00 00 00 ........
I also noticed the disconnections usually start with red X icon in my taskbar with its bubble and then later the long disconnection even though no red X (1 GB and connected). If I were to disconnect the cat5 cable from NIC, then it wouldn't even detect it is missing the cable!
The only way to fix this was to reboot (best way and last longer) OR disable network connection and re-enable it (Windows XP's Network Connections) or the NIC itself (Device Manager), but that doesn't always last long (maybe a minute). Example of my pings right after disabling and re-enabling NIC:
C:\>ping 192.168.0.1 -t
Pinging 192.168.0.1 with 32 bytes of data:
Request timed out.
Reply from 192.168.0.1: bytes=32 time<1ms TTL=150
Reply from 192.168.0.1: bytes=32 time<1ms TTL=150
Reply from 192.168.0.1: bytes=32 time<1ms TTL=150
Request timed out.
Reply from 192.168.0.1: bytes=32 time<1ms TTL=150
Request timed out.
Request timed out.
Reply from 192.168.0.1: bytes=32 time<1ms TTL=150
MSINFO32 in case it helps (seems OK to me, but I am not a hardware expert):
[Conflicts/Sharing]
Resource   Device
I/O Port 0x00000000-0x00000CF7   PCI bus
I/O Port 0x00000000-0x00000CF7   Direct memory access controller
I/O Port 0x000003C0-0x000003DF   Intel(R) 4 Series Chipset PCI Express Root Port - 2E21
I/O Port 0x000003C0-0x000003DF   ATI Radeon HD 4800 Series
IRQ 21   Intel(R) ICH10 Family USB Universal Host Controller - 3A38
IRQ 21   OHCI Compliant IEEE 1394 Host Controller
IRQ 21   TechniSat DVB-PC TV Star PCI
IRQ 23   Intel(R) ICH10 Family USB Universal Host Controller - 3A34
IRQ 23   Intel(R) ICH10 Family USB Enhanced Host Controller - 3A3A
I/O Port 0x0000B000-0x0000BFFF   Intel(R) 4 Series Chipset PCI Express Root Port - 2E21
I/O Port 0x0000B000-0x0000BFFF   ATI Radeon HD 4800 Series
IRQ 16   Intel(R) 4 Series Chipset PCI Express Root Port - 2E21
IRQ 16   ATI Radeon HD 4800 Series
IRQ 16   Intel(R) ICH10 Family USB Universal Host Controller - 3A37
IRQ 16   Standard Dual Channel PCI IDE Controller
IRQ 16   Intel(R) ICH10 Family PCI Express Root Port 2 - 3A42
IRQ 16   Intel(R) ICH10 Family PCI Express Root Port 6 - 3A4A
IRQ 16   ASUS TV880 Video Capture (NTSC)
IRQ 17   Microsoft UAA Bus Driver for High Definition Audio
IRQ 17   Intel(R) ICH10 Family PCI Express Root Port 1 - 3A40
IRQ 17   Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC
Memory Address 0xD0000000-0xDFFFFFFF   Intel(R) 4 Series Chipset PCI Express Root Port -
2E21
Memory Address 0xD0000000-0xDFFFFFFF   ATI Radeon HD 4800 Series
IRQ 18   Intel(R) ICH10 Family USB Enhanced Host Controller - 3A3C
IRQ 18   Intel(R) ICH10 Family USB Universal Host Controller - 3A36
IRQ 19   Intel(R) ICH10 Family USB Universal Host Controller - 3A39
IRQ 19   Intel(R) ICH10 Family USB Universal Host Controller - 3A35
IRQ 19   Intel(R) ICH10 Family 4 port Serial ATA Storage Controller 1 - 3A20
IRQ 19   Intel(R) ICH10 Family 2 port Serial ATA Storage Controller 2 - 3A26
Memory Address 0xA0000-0xBFFFF   PCI bus
Memory Address 0xA0000-0xBFFFF   Intel(R) 4 Series Chipset PCI Express Root Port - 2E21
Memory Address 0xA0000-0xBFFFF   ATI Radeon HD 4800 Series
Memory Address 0xFED90000-0xFED93FFF   System board
Memory Address 0xFED90000-0xFED93FFF   System board
I/O Port 0x000003B0-0x000003BB   Intel(R) 4 Series Chipset PCI Express Root Port - 2E21
I/O Port 0x000003B0-0x000003BB   ATI Radeon HD 4800 Series
[IRQs]
Resource   Device   Status
IRQ 9   Microsoft ACPI-Compliant System   OK
IRQ 16   Intel(R) 4 Series Chipset PCI Express Root Port - 2E21   OK
IRQ 16   ATI Radeon HD 4800 Series   OK
IRQ 16   Intel(R) ICH10 Family USB Universal Host Controller - 3A37   OK
IRQ 16   Standard Dual Channel PCI IDE Controller   OK
IRQ 16   Intel(R) ICH10 Family PCI Express Root Port 2 - 3A42   OK
IRQ 16   Intel(R) ICH10 Family PCI Express Root Port 6 - 3A4A   OK
IRQ 16   ASUS TV880 Video Capture (NTSC)   OK
IRQ 17   Microsoft UAA Bus Driver for High Definition Audio   OK
IRQ 17   Intel(R) ICH10 Family PCI Express Root Port 1 - 3A40   OK
IRQ 17   Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC   OK
IRQ 21   Intel(R) ICH10 Family USB Universal Host Controller - 3A38   OK
IRQ 21   OHCI Compliant IEEE 1394 Host Controller   OK
IRQ 21   TechniSat DVB-PC TV Star PCI   OK
IRQ 19   Intel(R) ICH10 Family USB Universal Host Controller - 3A39   OK
IRQ 19   Intel(R) ICH10 Family USB Universal Host Controller - 3A35   OK
IRQ 19   Intel(R) ICH10 Family 4 port Serial ATA Storage Controller 1 - 3A20   OK
IRQ 19   Intel(R) ICH10 Family 2 port Serial ATA Storage Controller 2 - 3A26   OK
IRQ 18   Intel(R) ICH10 Family USB Enhanced Host Controller - 3A3C   OK
IRQ 18   Intel(R) ICH10 Family USB Universal Host Controller - 3A36   OK
IRQ 23   Intel(R) ICH10 Family USB Universal Host Controller - 3A34   OK
IRQ 23   Intel(R) ICH10 Family USB Enhanced Host Controller - 3A3A   OK
IRQ 20   Creative SB Audigy 2 ZS (WDM)   OK
IRQ 22   TechniSat DVB-PC TV Star PCI #3   OK
IRQ 0   System timer   OK
IRQ 8   System CMOS/real time clock   OK
IRQ 13   Numeric data processor   OK
IRQ 4   Communications Port (COM1)   OK
IRQ 6   Standard floppy disk controller   OK
IRQ 1   Standard 101/102-Key or Microsoft Natural PS/2 Keyboard   OK
IRQ 12   Microsoft PS/2 Mouse   OK
IRQ 14   Intel(R) ICH10 Family SMBus Controller - 3A30   OK
My detailed computer configurations can be found here: http://alpha.zimage.com/~ant/antfarm/about/computers.txt (primary computer).
Thank you in advance.

Quote from: NovJoe on 02-March-09, 23:10:05
Force your NIC to run at 100Mbps full duplex and see how it goes.
Check your router / switch ports as well as cables.
I will try 100 Mbps if it happens again. So far, it hasn't occurred after installing the driver supplied by MSI's Web site and not RealTek's Web site. The room temperatures even got warmer like 83F degrees.
As for router and switch, what am I checking for? Other computers didn't have any problems. As for cat5 cables, I already tried another one like I said in my original post.

Is it possible to create a configuration profile that will install multiple network printers and their associated drivers

Is it possible to create a configuration profile that will install multiple network printers and their associated drivers?
I was not able to find profile manager on my employer's installation of 10.6 Server. Is this only a feature of 10.7/10.8 server?

10.6 server does not have profile manager, profile manager is only available in 10/7 and 10.8 server
for 10.6 server you'll need to use wgm and server admin
printer management with 10.6, I recommend you read the relevant server manuals regarding
print server and user management, printer management

64 The specified network name is no longer available

Hi Experts,
We have been using TMG 2010 from last 5 years as a reverse web proxy for OWA , outlook anywhere , active sync etc. Of late users from one particular site have been complaining of regular disconnections on outlook and OWA.
We don't have complaint from any other site except to this , whereas users in this site can browse other secure web sites without any challenge.
I have diagnosed the packets coming from their public IP and i could see that lot of connections happen successfully whereas few it shows either denied connection or failed connection attempt.
if i concentrate on failed connection attempt , i get the below information. Can some one provide any hint on the possible resolution for this issue.
Any help would be much appreciated
Failed Connection Attempt
3/19/2015 1:29:14 PM
<id id="L_LogPane_LogType">Log type:
</id><id id="L_LogPane_WebProxyForward">Web Proxy (Reverse)</id>
<id id="L_LogPane_Status">Status: </id>64 The specified network name is no longer available.
<id id="L_LogPane_Rule">Rule:
</id>Outlook anywhere success rule
<id id="L_LogPane_Source">Source:
</id>External (91.230.41.193:53933)
<id id="L_LogPane_Destination">Destination:
</id>Local Host
<id id="L_LogPane_FilterInfo">Filter information:
</id>Req ID: 19374dc2; Compression: client=No, server=No, compress rate=0% decompress rate=0% ; FBA cookie: exists=no, valid=no, updated=yes, logged off=no, client type=unknown, user activity=yes
<id id="L_LogPane_Protocol">Protocol:
</id>https
<id id="L_LogPane_User">User:
</id>anonymous
Md.Abubakar Noorani IT Systems Engineer Serco Ltd.

Hi,
>>64 The specified network name is no longer available
This error is very general. You need to collect a network trace and analyze it. The most common one is when the backend server is performing a dirty TCP connection reset.
You could have a look at the blog below.
Error 64 “ The specified network name is no longer available” while accessing a
HTTPS site through ISA 2006
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Network events and callbacks (netrwork available/unavailable)

Similar Messages

Maybe you are looking for