Network Manager keeps asking for WPA passphrase

Hi, I finally managed to install arch on my netbook, everything seems to be in working order apart from my wireless connection..
I've installed and configured the broadcom drivers for my card from the AUR and both the access points I usually connect to (under windows/ubuntu) are visible.
firstly I tried to connect to my access point using wicd, it appears to work until it trys to validate the connection and eventually returns the error:
'Connection Failed: Bad Password'
im 100% certain i have entered the passphrase correctly.
I googled around, to find some people are having similar problems - i couldnt find a complete solution to my problem but a lot of people were linking to wicd-bzr. I have the same problem using wicd-curses..
next i decided to try NetworkManager, I uninstalled wicd and installed networkmanager 'pacman -S network-manager-applet'
again, the manager displays all available access points, i try to connect to my router and it repeatedly asks for my passphrase and never manages to connect.
does anyone has any ideas?
im using xfce4 (i also tried in gnome), the broadcom device is B4312, and the network security is WPA. Cheers.

Same problem here, tested with Wicd (also wicd-bzr), Netcfg and NetworkManager.
Tried wpa_gui, the event history keep saying:
WPS-AP-AVAILABLE
Trying to associate with [MAC-ADDRESS] (SSID)
Authentication with [MAC-ADDRESS] timed out
CTRL-EVENT-SCAN-RESULTS
Edit: sorry, i forgot to paste wpa_supplicant output with -d flag:
[root@hydra log]# wpa_supplicant -ddd -Dwext -iwlan0 -c/etc/wpa_supplicant.conf -B
Initializing interface 'wlan0' conf '/etc/wpa_supplicant.conf' driver 'wext' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant.conf'
ctrl_interface='/var/run/wpa_supplicant'
ctrl_interface_group='network'
update_config=1
Line: 5 - start of a new network block
ssid - hexdump_ascii(len=21):
46 41 53 54 57 45 42 2d 31 2d 50 41 32 37 32 39 FASTWEB-1-PA2729
30 31 35 4d 41 015MA
PSK (ASCII passphrase) - hexdump_ascii(len=21): [REMOVED]
proto: 0x2
key_mgmt: 0x2
pairwise: 0x8
auth_alg: 0x1
PSK (from passphrase) - hexdump(len=32): [REMOVED]
Line 12: removed CCMP from group cipher list since it was not allowed for pairwise cipher
Priority group 0
id=0 ssid='FASTWEB-1-PA2729015MA'
WEXT: cfg80211-based driver detected
SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf
capabilities: key_mgmt 0xf enc 0xf flags 0x0
netlink: Operstate: linkmode=1, operstate=5
Own MAC address: 00:13:02:10:34:2e
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_countermeasures
RSN: flushing PMKID list in the driver
Setting scan request: 0 sec 100000 usec
WPS: UUID based on MAC address - hexdump(len=16): a6 20 a7 e6 1e b5 58 c3 92 4f 1e 08 8d 27 ba 7a
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: Supplicant port status: Unauthorized
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: Supplicant port status: Unauthorized
EAPOL: Supplicant port status: Unauthorized
ctrl_interface_group=90 (from group name 'network')
Added interface wlan0
Daemonize..
My wireless card is a Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
Router is a Linksys WRT320N, configured with WPA2 Personal, Encryption AES or TKIP
Last edited by morgenstern (2010-11-19 18:41:58)

Similar Messages

Adobe Application Manager Keeps Asking For Serial Number

I bought CS6 Design Standard a few days ago, and although I have already validated the software, these last couple of days every time I open Photoshop, Adobe Application Manager thinks I am using a trial version and asks me to choose between continuing this trial and licensing the software. After I enter my serial number everything works fine but it is a nuissance to be entering the serial all the time. I never even had a CS6 trial installed on this computer before. Is there a way around this? Is this happening because of my firewall settings? Any help is appreciated. Thanks.

Hello there,
Rather than starting a new thread, I prefer to pile up on this one.
I have the same problem. Quite regularly, Adobe Application Manager (AAM) ask me if I want ot carry onthe trial or enter a license. I entered my license so often that I know it by heart now.
I'm under OSX 10.6.8 (iMac desktop), French language (same for CS6 standard).
I have only one user, and it is an "administrator".
Rather than asking about privileges, what are the files this application manager need access to? Where are they located? Which file? Who should be the owner and what should the permission be on those files? Would a "Repair permission" fix this for these application files (i.e. non system files)?
Thanks in advance for any help.
Pierre
PS: The same CS6 is installed on a laptop under 10.8.2 (with same serial). I use it rarely. But there it does not seem to have the same issue. So far, AAM did not ask for serial again and keep updating happily.

Adobe Application Manager keeps asking for licence confirmation

I own a student licence for Adobe Creative Cloud. It has worked fine for some months but during the last weeks I am frequently asked to confirm my licence agreement when starting a CC app.
This has become quite annyoing. Today I used PS, AI and ID – every single App wanted a confirmation.
Is this meant do work like that, am I doing anything wrong or might there be an issue?

Asked to sign in after paying
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

Desktop manager keeps asking for device password

I type in my password which I know to be correct, or I'd have been locked out of it a long time ago, and it just keeps popping up. I can't back up my device or anything with the PC. What gives? Is it looking for a different password??

If you have a numeric password, it probably is a alphabetical password on the computer, if you don't use ALT that is.
Example: if your password is -1234-on your phone without using ALT, it is -wers- on your computer.

I have gifted an airport extreme to a neighbor and I assumed she would be able to connect and "create a new network" with a new password on her iPhone. That didn't happen. It keeps asking for my password. What next? Thanks!

I have gifted an airport extreme to a neighbor and I assumed she would be able to connect and "create a new network" with a new password on her iPhone. That didn't happen. It keeps asking for my password. What next? Thanks!

Have them perform a complete power recycle of their networking hardware. Please check out the following AirPort User Tip for details. Also, make sure that they perform a "factory default" reset on the AirPort (as described in the tip) to be sure to return the AirPort back to its "out-of-th-box" configuration.

Keeps asking for username password proxy server

When i start Firefox 8 at work, Firefox keeps asking for username and password. I have fild in the network settings to not use a proxyserver for: 150.0.*;12.0.*.
Now the startpage of Firefox is our ourIntranet which is: http://ourintranet (which has a ip example: 150.0.2.3
So what i want to do is: use proxy except for this ip: xxxxxxxx, because this ip is http:\\ourintranet
Now i cannot go to http:\\ourintranet because he keeps asking for password.

I'm not sure why it's not working. I think Firefox looks in the hosts file and then the configured/automatic DNS server for address resolution, in that order. To specify otherwise (for eg. a proxy for address resolution) the [http://kb.mozillazine.org/Network.proxy.socks_remote_dns network.proxy.socks_remote_dns] in [http://kb.mozillazine.org/About:config about:config] has to be set to true.
You can also check in a [https://support.mozilla.org/en-US/kb/Managing-profiles new profile]. A new profile would have the default settings and wouldn't usually have any installed extensions and would be clean. You can try then try the proxy settings.
The 150.0.2.0/24 should work (24 bits for the network with 254 addresses - http://www.subnet-calculator.com/cidr.php) unless perhaps the network is super-netted in which case you can also try the supernet prefix instead of /24.

Outlook 2013 keep asking for password

Hi,
We having problem where outlook is keep asking for password every time you start outlook.
Things I tried
- I have created new outlook profile - still same problem
- Clear all passwords from password manager - still same problem
- Deleted the .OST file - still same problem.
- Always prompt for logon credentials - this is not tick
- I have tried this
http://support.microsoft.com/kb/290684
Only happening on Office 2013 not office 2007
One thing I did notices when I was debugging the problem.
When I removed the office and reinstalled the problem went away for
whole 1 week but then on Monday it start asking for password again which
makes be thing that they is something in group policy which is causing
this.
We are using
- Windows 7
- Office 365 (2013)
- Our emails are being hosted by Microsoft clod
I don't know what else to try or check.

Hi,
Does this issue happen to all clients or a special one?
Please first check if Logon network security under More Settings on the Microsoft Exchange
Security tab is set to a value other than Anonymous Authentication.
In addition, you may also follow this article to troubleshoot the issue:
http://blog.quitecloudy.com/2012/06/troubleshooting-office-365-multiple.html
Please Note: Since the web site is not hosted
by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Creative Suite 6 Design Standard (for Mac) keeps asking for the Serial Number ... over and over!

My iMac has a well-installed Creative Suite 6 Design Standard. I have a valid serial (purchased it) and it works fine. Every couple of months though the Adobe Application Manager pops up and asks me wether I want to continue the test-period or if I am willing to enter the serial number. So I dig into my papers and get the serial number out ... it is accepted every time and works fine then. But after some time - there we go again: I have to enter the number.
I faced this issue a while ago and read that it was recommended to update the Application Manger - which I did. But ... still being bothered by these kinds of questions from time to time.
What can I do?
Information
27" iMac with Mac OS X 10.6.8 (it is not possible to update the OS --- this is the reason why I am running CS6)
Creative Suite 6 Design Standard for Mac

You can choose to get the product activated offline: http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html#Activate your software offline
Please refer to :
Sign in, activation, or connection errors | CS5.5 and later
Re: Mac OSX Photoshop CS6 keep asking for serial number
Re: Photoshop CS6, non Creative Cloud, keeps asking me to register
Hope these help you.
Regards
Rajshree

HP Officejet pro 8500 won't print and keeps asking for a proxy setting. Help.

HP Officejet pro 8500 won't print and keeps asking for a proxy setting. Help.

Hi,
Can you confirm that you have an Officejet 8500a or Officejet 8500? On the 8500a model, you can set the networks proxy address and port setting from the front panel of the printer (setup>Webservices setup>proxy). If you are unsure what your proxy settings are you'll need to contact your network admin. If your network uses a proxy users name and password for all devices, you need to enter this information along with the proxy address and port in the printers embedded web server. Type the products IP address into an internet brownser window (printer must be connected to the same network as PC). Select the network tab, and than look for the proxy settings option. Enter in the information and click apply. Once the networks proxy information has been correctly inputed into the embedded web server, try printing again. If unsuccessfully, you might try reinstalling the printer software after uninstalling it. Hope this helps!
I was an HP employee
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks.

I am unable to connect to my WIFI.It keeps asking for a password and when i enter the password it says that is unable to connect or i have entered an incorrect password

I am not able to connect to my Wifi. It keeps asking for a password and when i enter the password it either says Unable To Connect or Incorrect Password.
This occurred only after installing a new Wifi router from Qtel (service provider). any assisyance is greatly appreciated.

You should call Qtel technical support and ask for help.
Where did you get the password that you are trying? What does it look like? (Length, type of characters)
Do you know what type of security is being used? WEP, WPA, WPA2

Office mac keeps asking for license key with fusion drive

I'm posting this in case anyone else is having this trouble where Office for Mac 2011 keeps asking for the license key. I have a later 2013 iMac with Fusion drive and never have been able to use office on this computer without entering the key. In talking with Microsoft they removed office and all the files and reinstalled with no help. In speaking with Apple, they said there is a known issue with Microsoft Office and the Fusion drive and Microsoft is working on a patch. Evidently the fusion drive moves the files around and to Microsoft that looks like new hardware so it prompts for the key. Realy annoying! Microsoft

I'm a certified Apple consultant and I recently hit this issue at an installation. On seven iMacs with the Fusion drive, I deleted the "Thunderbolt Bridge" interface from the Network System Preference. We then rebooted the computers, entered the product key one more time, and so far, the problem has disappeared and survives subsequent rebootings.
Obviously, if you are frequently networking two Macs using Thunderbolt, this isn't a good long-term solution (though it is easily added back). However, it does appear to work. I have no sound theory as to why it works, except that Office might be interpreting the existence of that bridge as evidence that the software was copied onto a machine instead of properly installed. This is just a wild guess, though.
I have no idea if it will work for others, but hey, the forums are for throwing out these ideas and seeing if one of them sticks for most people. So...there it is.

Keeps asking for password

Why doe my iPad keep asking for my password frequently? Can someone please help?

I too am having the same problem.
It appears to be fairly random. Often when I open up my iPad it comes up, or in the middle of a game or when I start apps.
Occasionally the screen says unable to purchase GRand Theft Auto III and 42 other items. This shouldn't be an issue as I have managed to purchase GTIII and all apps and all have installed all correctly and they work.
I have synced, and re synced turned off fully, Logged out fully from ITunes disabled auto updates ...everything. Even checked on my PC for available downloads and again it says there are none waiting. Still it haunts me. I mentioned GT III as I wondered if others may have had a similar problem?
Hope you can help, as it getting very frustrating. I should add lastly that I don't have the same problem on my IPhone 4S.

Keeps asking for my password sometimes takes it sometimes doesn't

I very much appreciate your help and expertise --- Thunderbird keeps asking for my password. I use it for both a non gmail account and a gmail account. Both accounts have repeatedly asked for the password... however the gmail account seems to work better than the other one.
It doesn't matter if I click the box that says save this password or not.
I had yesterday reset the password once on the server side of things and thought that had fixed it... but then again today I started getting the same error message that it cannot login to my server.
I looked through your help boards and cannot find a solution that I understand. There are a couple that seem like they may work but the things they are naming to reset are things I don't even know what they are... Sorry I'm not very techno savvy --

Delete the password stored in Tools/Options/Security/Passwords/Saved Passwords, OK, restart TB, and enter the correct password when you're prompted at the next network connection.

Keeps asking for rpt file when executing store procedure

Hi all,
  I have coded an standard stored procedure but when I execute it, Management Studio keeps asking for .rpt file to save the results. I am using Enterprise 2008 R2.
This is the code:
USE [mydatabase]
GO
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[usp_chart](
@parameters)
AS
BEGIN
SET NOCOUNT ON;
DECLARE @query NVARCHAR(4000)
   DECLARE @total INT
   DECLARE @strDescriptor NVARCHAR(4000)
   DECLARE @dsvalues NVARCHAR(4000)
   DECLARE @strCache NVARCHAR(2000)
   SET @strDescriptor = dbo.udf_chart_derived_descriptor_intotemp(@derivation_Id)
SET @dsvalues = dbo.udf_chart_derived_dynamic_query_fortopn( @derivation_Id,
   @cache_Id,
   @topn,
@flt_customer_Id,
@flt_user_Id,
@flt_datefrom,
@flt_dateto,
@product_Id
   SET @strCache = 'SELECT top ' + @topn + 'PERCENT g.Supplier_Id Supplier_Id
INTO #T_CacheTopN
FROM T_CacheSupp g
WHERE g.Cache_Id = ' + @cache_Id +
' ORDER BY g.Position'
   IF @strFilter is null
   BEGIN
SET @query = @strCache + ';' + @strDescriptor + ';' +
'DECLARE @total INT;' +
@dsvalues +
'SELECT @total = COUNT(*)
FROM #T_Condition;
SELECT c.Condition_Index, ROUND(COUNT(*)/CAST(@total as float),2)*100
FROM #T_Condition c
GROUP BY c.Condition_Index';
   END
   ELSE
   BEGIN
   DECLARE @sqlfilter NVARCHAR(2000)
SET @sqlfilter = dbo.udf_chart_dynamic_query_filter_fortopn(@strFilter,@product_Id,@topn, @cache_Id)
SET @query = @strCache + ';' +@strDescriptor + ';' +
'DECLARE @total INT;' +
@dsvalues +
'SELECT @total = COUNT(*)
FROM #T_Condition;'+ @sqlfilter +
';SELECT c.Condition_Index, ROUND(COUNT(*)/CAST(@total as float),2)*100
FROM #T_Condition c LEFT OUTER JOIN #T_NotWanted d
ON c.Data_Id = d.Data_ID
WHERE d.Data_Id is null
GROUP BY c.Condition_Index';
   END
   EXEC(@query)
   RETURN
END
When I execute:
DECLARE
@parameters NVARCHAR(4000)
execute usp_chart_derived_fortopn @parameters
it asks me for a .rpt file.
Why is that? I am not running a report.
Thanks

As other have said, you have set Results to File.
But since you posted your code, I had a look at it. I was not able to understand why you use dynamic SQL. For instance, this:
   SET @strCache = 'SELECT top ' + @topn + 'PERCENT g.Supplier_Id Supplier_Id
INTO #T_CacheTopN
FROM T_CacheSupp g
WHERE g.Cache_Id = ' + @cache_Id + ' ORDER BY g.Position'
Can be written as
SELECT top (@topn) PERCENT g.Supplier_Id Supplier_Id
INTO #T_CacheTopN
FROM T_CacheSupp g
WHERE g.Cache_Id = @cache_Id
ORDER BY g.Position
If you can avoid dynamic SQL, your code becomes easier to maintain, and less vulnerable for nasty surprises.
And if you use dynamic SQL, you should use sp_executesql and pass parameter values as parameters instead of inlining them.
Erland Sommarskog, SQL Server MVP, [email protected]
Links for SQL Server Books Online:
SQL 2008, SQL 2005 and
SQL 2000.
(Just click the link you need.)

TS3274 ipad keeps asking for VPN

since upgrading to OS 8 my Ipad keeps asking for my VPN connection and password , I dont know this information so I can`t do anything. How do I move onward from this?

General settings vpn need to be off this is used only for a private closed network. Bsydd uk

Network Manager keeps asking for WPA passphrase

Similar Messages

Maybe you are looking for