Never-ending blend installation notifications

I am using the passport. When I connect to a computer with USB for the purpose of charging the phone's battery, a notification pops up on the phone stating that the device is trying to install Blend on the computer. When I select 'dismiss', it pops up again a second later. This continues indefinitely, rendering the device unusable while charging via connection to a computer. I do NOT want to install Blend on these computers, because they either are not mine or they are running Linux.
I have tried turning off the 'Allow connections' option in Settings > Device Connections, but this did not solve the issue.
How do I stop these installation notifications, either by preventing the installation attempts or by just preventing the notification of them?
Thanks

Have you installed Blend?
Edit: Nevermind, I see you said you don't want to install it.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Similar Messages

Wireless printer is setup, but the HP Installer Setup program is in a never-ending loop

Wireless printer is setup (HP Officejet 4500), but the HP Installer Setup program is in a never-ending loop. It says "Fatal error during installation." and keeps trying to uninstall/reinstall/ etc etc etc. Printer is setup and runs fine, just need to get rid of this crazy loop - any guidance?
Dee
This question was solved.
View Solution.

Which OS is installed?
I recommend that you uninstall the printer software from the HP folder in start-->All Programs -->HP --> uninstall software
After the uninstall is completed and your system restarted install and configure the printer again.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

SAPNWABAP701SR1_TRIAL installation - Phase 18 Import ABAP never ends

Hi all!
I already checked this discussion in the forum but it doesn't seem to be a only-way resolution.
I am trying to install SAPNWABAP701SR1_TRIAL and the computer spent the hole night just at the 18th phase (Import ABAP). At the status bar says: "Import monitor jobs: running 3, waiting 23, completed 2, failed 0, total 28".
At my first try i thought it was the RAM size or the virtual memoty but now they are 1.6GB and 4GB respectivelly.
For what i read i list possible problems:
- JRE version is 1.4.2_11
- JDK is not installed, just the JRE
- enviroment variables are not set
- loopback interface's ip address is 192.168.1.7 (and not 10.10.10.1) as my local network is 192.168.1.0
the host file is like that:
192.168.1.7 myHostName
please can anyone can tell me if this items might be the reason why i can't complete the installation?
Thank you a lot!.
Edited by: Fabio Luiz Esperati Pagoti on Jun 12, 2009 2:38 PM

Hi Fabio,
I too had the same problem. During my first run, I waited for 2-3 hrs and since there was no progress, I ended the installation. After much trouble, I started again and this time, when the installation was (seemingly) stuck at this step, I thought of checking the logs and I saw that infact processing was happening in the background. For me it took 7 hours 30 minutes for this to be completed. So be patient and the installation will proceed.
When this step is running, you can see the status using the log file: C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL\import_monitor.log. There you will find lines like:
Loading of 'DOKCLU' import package is started.
Loading of 'SAPSSEXC_1' import package is started.
and so on......
In the same folder you will see log files with these names (DOKCLU, SAPSSEXC_1, etc). If you continuously review them, you can see the progress.
Regards
Ranjith

Suddenly never ending pinwheel and slower than usual

My macbook pro suddenly started to get slow and gave me a never ending pinwheel while only having Safari running. The mouse was working but no response when clicking. Only way to restart computer was by holding down the Start button. Restarted and this time the computer hang up when I tried to Log in (while writing Login and password). I mangaged to Log in two more times but I got the pinwheel again when browsing internet. Finally I managed to make it to Support/Community.. any idea what's wrong?
Thanks in advance (: !

Print out these instructions and info at the links provided as most require you to be offline.
Do a SMC and PRAM reset first, then a Hardware Test
https://support.apple.com/kb/ht3964
http://docs.info.apple.com/article.html?path=Mac/10.6/en/26871.html
https://support.apple.com/kb/ht1509
If the hardware test gives any errors, note them here.
Check the time and date on your computer to make sure it's correct.
If your still having slowdowns, pull the power plug on both the router and the modem, connect the modem and wait a bit then connect the router. Reboot your computer and it should connect automatically to your wifi. See if your slowdowns only occur if connecteted to the WiFI or not, that way it can be determined if it's a internet issue or not.
(If your still having slowdowns, it might be because you have a Open Network on your router and someone is leaching off of it. WPA 2 with AES is the only secure wifi standard))
You can test your internet connection speed here, see if it matches what your paying for.
http://www.speedtest.net/
IF your computer still has issues then:
Fish out the 10.6.x disks that came with your computer (grey) or the 10.6.3 Snow Leopard retail disk, stick it in the computer and reboot holding the c key.
(Make sure the disks are clean on the bottom, wipe with a very soft cloth and a tiny bit of rubbing alcohol to clean and don't place the disk on a harsh surface that can damage the bottom.)
Second screen in, under the Utilities menu is Disk Utility, select your drive on the left and click First Aid, Repair Disk (please write down any errors this gives and tell us) and Repair Permissions (the results there you can ignore)
Do not erase or reformat the drive.
Reboot and see if your computer works, if not repeat the c boot off the installer disk again and this time skip Disk Utility and install OS X.
It will install on top of your 10.6.8 installed version (only, not your programs or files), which when finished you reboot and immediately Software Update to 10.6.8
This should take care of anything wrong with OS X itself.
Now to clean the caches of the user and other checks.
Download the free OnyX for 10.6 and run ALL the maintenance and cleaning aspects and reboot at the end of the tasks (you can cancel in between reboots) but reboot at the end of using Onyx)
Do all the checks it asks when it starts up and note any errors here they report.
Also under the Verify Tab is a Preference (plist) check, check the "show only corrupt files" and run that, make a note of all and any corrupt plist files.
http://www.titanium.free.fr/
Plist files are preference settings files that sometimes get corrupted and may be the cause of your problems.
If you have some, then you can look in your Users/Library/Preferences folder for them and Trash them and reboot the machine and load the program responsible, the plist file gets rebuilt without your preferences which you reset.
The next thing to check would be your web browser plug-ins here
https://www.mozilla.org/en-US/plugincheck/
For Flash in Safari check here again as it's more accurate
http://flashbuilder.eu/flash-player-version.html
Download Flash and install if it's not this version (latest)
http://get.adobe.com/flashplayer/
Silverlight here
https://www.microsoft.com/getsilverlight/get-started/install/default.aspx
Finally install and run ClamXAv on your drive, this will look for known malware that might have gotten accidentally installed.
http://www.clamxav.com/
Since OS X was reinstalled, along with bundled programs like Safari, this should only leave applications and users as a source of any infection.
If your stil having issues, then create a new user and transfer your files over and when up on the new user, delete it.

Uploading never ends

my uploading to ANY site NEVER ends!!! tis problem only Firefox experiences!!! it doesn't matter what site I upload to Firefox displays a uploading and never stops for eternity!!! I tried an extension called 'upload progress' to see what the slowness is, and when it gets to 100% I NEVER get redirected to the next step in the upload progress!!! Facebook, Forums, image sites, everything I upload to experiences this issue on Firefox

Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox and any leftover program files and then reinstall Firefox. Please follow these steps one by one:
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu) and confirm all upcoming messages.
#Now, uninstall Firefox by following the steps mentioned in the [[Uninstall Firefox from your computer#w_uninstall-firefox|Uninstall Firefox]] article.
'''IMPORTANT:''' On Windows, the uninstaller has the option to remove your personal data and settings. Make sure that you do '''not''' check this option; otherwise all of your bookmarks, passwords, extensions, user customizations and other Firefox [[Profiles|user profile data]] will be removed from your computer.
After uninstalling Firefox on Windows, delete the "Mozilla Firefox" program folder, located by default in one of these locations:
* '''(On 32-bit Windows)''' ''C:\Program Files\Mozilla Firefox''
* '''(On 64-bit Windows)''' ''C:\Program Files (x86)\Mozilla Firefox''
#Go to the Windows Start menu and click on "Computer".
#In the Explorer window that opens, double click Local Disk (C:) to open the C:\ drive.
#Find the "Program Files (x86)" folder or "Program Files" folder.
#* On 32-bit Windows, double-click the '''Program Files''' folder to open it.
#* On 64-bit Windows, you will see a "Program Files (x86)" folder AND a "Program Files" folder. Open the '''Program Files (x86)''' folder.
#Look for a '''Mozilla Firefox''' folder. If you find one, right-click it and select ''Delete'' and confirm that you want to move the folder to the Recycle Bin.
Now, go ahead and reinstall Firefox:
#Double-click the downloaded installation file and go through the steps of the installation wizard.
#Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
Have a wonderful day!
~Jake

InstallShield Wizard never ends under Solaris !

Hi
I am launching ./solaris_livecycle8_setup.bin under a new path on a same machine as my other Es installation.
The Installshield wizard never ends
This must be an issue with some temporary files of the previous separate install
But I can't find any files in /var/tmp or /opt/adobe
How can I extract nice adobe install files to luanch my install ?
Regards
Chris

A never-ending UT acquisition is not the same as the problem described by CSCtd49439. That would also not account for an inflated number of end hosts. Without knowing the exact details of the end hosts, I do know we had an old bug in Campus 4.x where UT would generate perpetual duplicates. This was fixed in 4.0.11, but one would need to reinitialize the ANI database to remove the duplicates. If this is an upgrade from LMS 2.6, then perhaps you still have old, stale data. Running this command would fix that:
NMSROOT/bin/perl NMSROOT/campus/bin/reintdb.pl -ut
As for the never-ending UT, check to see if the UTMajorAcquisition process is still running. If so, contact TAC, and they can walk you through the process to get a thread dump from this process. That will help identify what the process is doing and whether or not this is some kind of deadlock, or a configuration issue.

Cache refresh never ends

Hi,
when I refresh the cache in PI... it always stays in the state : Cache Content is being updated...
It never ends and I'm getting some really strange behavior in Integration Builder like when I configure a configuration scenario and put a communication component for a business system, it is ok but then the setting just disapears if I switch to another business system in the graphic and comme back...
It looks like a cache problem and its driving me crazy. Its actually easier when you have an actual error rather than a never ending process.
Thanks.

Hi
-->Please Follow the below steps for CACHE REFRESH,If these does not solve your problem contact your basis people and restart the Server.
-->In ID fro MENU->TOOLS->Click on Cache Notifications ans see the status if the cache is not updated.
then goto T-code SXI_CACHE and do the Full cache and Delta cache refresh.
-->Also check the RFC destination of type H in your PI system INTEGRATION_DIRECTORY_HMI is working or not if not check the path prefix and your technical settings and logon security correct or not.
>Also do the cache refresh from PI home page ADMINISTRATION>CACHE OVERVIEW ,Do the cache refresh for IR ,ID and RWB.
Thanks

Never-ending downloads

I am trying to download MySQL for my new Leopard installation on a Power Mac Quad G5. I am choosing the 64 bit version (I assume that it correct) but my downloads never end... I have 60.4Mb of 60.4Mb but the download continues forever. I have tried both HTTP and FTP downloads, and using Safari as well as Firefox - it makes no difference. I have chosen various mirrors - no deal whatever I do...
Any clues?

Hi Kirk,
Did you try to trash the download.plist
You will find it in this location ... Home_Folder>Library>Safari>Download.plist
Quit Safari browser when running an trash the plist file.
Now open Safari again an try to download the application you like ... Post back with the results.
Good luck ...
Dimaxum

SOLUTION for the never ending reboot loop when charging

I used my iPad until the battery was completely flat, then when I went to charge it, it got stuck in the never ending reboot loop where it shows the Apple logo for about 30 seconds, then shows the home screen for a split second before shutting down and repeating the whole process again and again.
So here's what you need to do to fix this problem without having to restore or plug into iTunes.
1. Plug in the charger
2. When the Apple logo appears, unplug the charger
3. As soon as you see the home screen appear, plug the charger back in. You need to do this quickly as the home screen only shows for a split second
4. The loading wheel should appear and shut down the iPad
5. Leave the iPad for a good 30mins or so just to get some battery life into before you start using it again.
And that's it!

Figured I'd start recording the errors I get in the Installer Log:
localhost : BomFatalError - cpio read error: bad file format
localhost : Install failed: some files for GarageBandinstrumentsTiger may not have been written correctly.
localhost : BomFileError 0: Unknown error: 0 - ./Instrument Library/Sampler/Sampler Files/Grand Piano/054F#2KM56M.wav
localhost : Install failed: some files for GarageBandinstrumentsTiger may not have been written correctly.
localhost : BomFatalError - cpio read error: bad file format
localhost : Install failed: Some files for iDVDThemes_Tiger may not have been written correctly.
localhost : BomFatalError - cpio read error: bad file format
localhost : Install failed: Some files for iWeb_App may not have been written correctly.
localhost : Install failed: Error encountered while writing receipt for iWebtempja.
localhost : BomFatalError - cpio read error: bad file format
localhost : Install failed: Some files for iWork Trial may not have been written correctly.

Updated my iPhone 5 to ios7, in the App store after installing updates I now have a never ending list of the Apps I've updated. How do I get rid of the list after they've been updated? In the previous version I did not have an annoying permanent list.

Updated my iPhone 5 to ios7, in the App store after installing updates I now have a never ending list of the Apps I've updated. How do I get rid of the list after they've been updated? In the previous version I did not have an annoying permanent list.

iOS 7 allows you to have your apps update automatically. Therefore, the list of what has been updated stays so that you can see what was updated, when and what the release notes say. It has been suggested that they list has a limit, much like Recents. Currently, there is no way for the user to delete the entries manually. Just try not to look at them.

Loading plsql_proxy.jar takes so long..never ends

Hello people,
I´m deploying a proxy cliente using command,
jpub -u SCOTT/SCOTT -sysuser SCOTT/SCOTT -proxywsdl=any_wsdl -endpoint=any
then the executing process stay in Load plsql_proxy.jar for a long time. it looks like never ends.
plsql_wrapper.sql
plsql_dropper.sql
plsql_grant.sql
plsql_revoke.sql
Executing plsql_dropper.sql
Executing plsql_wrapper.sql
loading sqlj/lib/dbwsclient.jar (about 5 minutes)...
Loading plsql_proxy.jar......................
the execution process looks like stopped at this here and doesn´t throw any exception.
I´ll be grateful the soon answer.
Rodius
anybody knows how long takes the proxy client generation process?

I have this issue also, with images from my D70 (~6 megapixels) ... no solution, except that when it happens, quitting and re-launching Aperture seems to clear it up for a while, at least until it happens again.
Given that you have almost twice the RAM and four times the CPU cores that I have, I suspect this is a software issue, and not one of insufficient hardware resources. :-)

How can I disable the end of call notification or at least turn it down?

On my Droid Turbo, At the end of a call there is a big loud beep. (end of call notification) I need to disable it or turn it down because on headset it is deafening. I had this exact problem on the HTC One M8 and now with the Droid Turbo. My wife's Samsung S5 has an option to disable it and I believe the LG G3 has an option to disable it. IT isn't a problem except on headset or over hands-free in the car. It is intolerable when I have to turn up the phone to hear a caller. Please help soon as my 14 days are running out and I will likely have to trade in this phone Droid Turbo in for the LG. Verizon technical support is no help at all.

Thank you for replying Amber, it is a little more than annoying, it is a safety hazard. Tinnitus is not a fun disease and this problem can be a contributing factor.
Yes the end of call notification (loud beep) does occur at the end of every call. And an end of call notification can be a good thing. But missing it a way to control it's volume. No, it is not as loud with the volume tuned down. It is not a problem unless using bluetooth or headset as the speaker is away from the ear. But on headset it is very loud, and extremely loud when you have to turn the phone up to hear a caller. I have a long commute and use a headset a-lot. My work around currently is to rip my headset out of my ear before a call ends to avoid the excruciating pain of having my ear blasted. Car bluetooth does have the same problem. Turn the phone up to hear a call then everyone in the car will get blasted. This is not a problem for those that do not use bluetooth or a headset. But for those that do, it hurts.

Root.sh script at the end of installation of Oracle Clusteware software

When i run the root.sh script at the end of installation of Oracle Clusteware software i receive the following message:.
Any ideas on how to fix this?
====================================================================
*[root@rac1 cdata]# /ora_dba/crs/oracle/product/10.2.0/db_1/root.sh*
WARNING: directory '/ora_dba/crs/oracle/product/10.2.0' is not owned by root
WARNING: directory '/ora_dba/crs/oracle/product' is not owned by root
WARNING: directory '/ora_dba/crs/oracle' is not owned by root
WARNING: directory '/ora_dba/crs' is not owned by root
WARNING: directory '/ora_dba' is not owned by root
Checking to see if Oracle CRS stack is already configured
Setting the permissions on OCR backup directory
Setting up Network socket directories
PROT-3: Failed to create export file
Failed to upgrade Oracle Cluster Registry configuration
===================================================================
OS verssion is :
Linux rac1.localdomain 2.6.18-194.el5PAE #1 SMP Mon Mar 29 20:19:03 EDT 2010 i686 i686 i386 GNU/Linux ( rhel5 32 bit)
Cluster verssion =11g
Vmware
=================================================================================================
Log file output ----
[root@rac1 client]# cat $CRS_HOME/log/rac1/client/ocrconfig_10171.log
Oracle Database 11g CRS Release 11.1.0.6.0 - Production Copyright 1996, 2007 Oracle. All rights reserved.
2010-12-20 13:37:16.649: [ OCRCONF][3086510576]ocrconfig starts...
2010-12-20 13:37:16.650: [ OCRCONF][3086510576]Upgrading OCR data
2010-12-20 13:37:16.672: [ OCRCONF][3086510576]OCR already in current version.
2010-12-20 13:37:16.780: [ OCRCONF][3086510576]Exporting OCR data to [ora_dba/crs/oracle/product/10.2.0/db_1/cdata/crs/ocr10.1.0.2.0]
2010-12-20 13:37:16.803: [ OCRCONF][3086510576]Error encountered during opening export file [ora_dba/crs/oracle/product/10.2.0/db_1/cdata/crs/ocr10.1.0.2.0] [-1]
2010-12-20 13:37:16.803: [ OCRCONF][3086510576]Failed to call export OCR (-1)
2010-12-20 13:37:16.803: [ OCRCONF][3086510576]Failed to make a backup copy of OCR
2010-12-20 13:37:16.803: [ OCRCONF][3086510576]Exiting [status=failed]...
=======================
./runcluvfy.sh out put :
[oracle@rac1 clusterware]$ ./runcluvfy.sh stage -pre crsinst -n rac1,rac2 -verbose
Performing pre-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "rac1"
Destination Node Reachable?
rac2 yes
rac1 yes
Result: Node reachability check passed from node "rac1".
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name Comment
rac2 passed
rac1 passed
Result: User equivalence check passed for user "oracle".
Checking administrative privileges...
Check: Existence of user "oracle"
Node Name User Exists Comment
rac2 yes passed
rac1 yes passed
Result: User existence check passed for "oracle".
Check: Existence of group "oinstall"
Node Name Status Group ID
rac2 exists 54321
rac1 exists 54321
Result: Group existence check passed for "oinstall".
Check: Membership of user "oracle" in group "oinstall" [as Primary]
Node Name User Exists Group Exists User in Group Primary Comment
rac2 yes yes yes yes passed
rac1 yes yes yes yes passed
Result: Membership check for user "oracle" in group "oinstall" [as Primary] passed.
Administrative privileges check passed.
Checking node connectivity...
Interface information for node "rac2"
Interface Name IP Address Subnet Subnet Gateway Default Gateway Hardware Address
eth0 10.10.0.67 10.10.0.0 0.0.0.0 10.10.0.1 00:0C:29:82:EB:64
eth1 10.10.2.102 10.10.2.0 0.0.0.0 10.10.0.1 00:0C:29:82:EB:6E
Interface information for node "rac1"
Interface Name IP Address Subnet Subnet Gateway Default Gateway Hardware Address
eth0 10.10.0.66 10.10.0.0 0.0.0.0 10.10.0.1 00:0C:29:C4:E6:1D
eth1 10.10.2.101 10.10.2.0 0.0.0.0 10.10.0.1 00:0C:29:C4:E6:27
Check: Node connectivity of subnet "10.10.0.0"
Source Destination Connected?
rac2:eth0 rac1:eth0 yes
Result: Node connectivity check passed for subnet "10.10.0.0" with node(s) rac2,rac1.
Check: Node connectivity of subnet "10.10.2.0"
Source Destination Connected?
rac2:eth1 rac1:eth1 yes
Result: Node connectivity check passed for subnet "10.10.2.0" with node(s) rac2,rac1.
Interfaces found on subnet "10.10.0.0" that are likely candidates for a private interconnect:
rac2 eth0:10.10.0.67
rac1 eth0:10.10.0.66
Interfaces found on subnet "10.10.2.0" that are likely candidates for a private interconnect:
rac2 eth1:10.10.2.102
rac1 eth1:10.10.2.101
WARNING:
Could not find a suitable set of interfaces for VIPs.
Result: Node connectivity check passed.
Checking system requirements for 'crs'...
Check: Total memory
Node Name Available Required Comment
rac2 1.11GB (1161108KB) 1GB (1048576KB) passed
rac1 1.09GB (1144852KB) 1GB (1048576KB) passed
Result: Total memory check passed.
Check: Free disk space in "/tmp" dir
Node Name Available Required Comment
rac2 570.36MB (584044KB) 400MB (409600KB) passed
rac1 461.97MB (473056KB) 400MB (409600KB) passed
Result: Free disk space check passed.
Check: Swap space
Node Name Available Required Comment
rac2 2.93GB (3068404KB) 1.5GB (1572864KB) passed
rac1 2.93GB (3068404KB) 1.5GB (1572864KB) passed
Result: Swap space check passed.
Check: System architecture
Node Name Available Required Comment
rac2 i686 i686 passed
rac1 i686 i686 passed
Result: System architecture check passed.
Check: Kernel version
Node Name Available Required Comment
rac2 2.6.18-194.el5PAE 2.6.9 passed
rac1 2.6.18-194.el5PAE 2.6.9 passed
Result: Kernel version check passed.
Check: Package existence for "make-3.81"
Node Name Status Comment
rac2 make-3.81-3.el5 passed
rac1 make-3.81-3.el5 passed
Result: Package existence check passed for "make-3.81".
Check: Package existence for "binutils-2.17.50.0.6"
Node Name Status Comment
rac2 binutils-2.17.50.0.6-14.el5 passed
rac1 binutils-2.17.50.0.6-14.el5 passed
Result: Package existence check passed for "binutils-2.17.50.0.6".
Check: Package existence for "gcc-4.1.1"
Node Name Status Comment
rac2 gcc-4.1.2-48.el5 passed
rac1 gcc-4.1.2-48.el5 passed
Result: Package existence check passed for "gcc-4.1.1".
Check: Package existence for "libaio-0.3.106"
Node Name Status Comment
rac2 libaio-0.3.106-5 passed
rac1 libaio-0.3.106-5 passed
Result: Package existence check passed for "libaio-0.3.106".
Check: Package existence for "libaio-devel-0.3.106"
Node Name Status Comment
rac2 libaio-devel-0.3.106-5 passed
rac1 libaio-devel-0.3.106-5 passed
Result: Package existence check passed for "libaio-devel-0.3.106".
Check: Package existence for "libstdc++-4.1.1"
Node Name Status Comment
rac2 libstdc++-4.1.2-48.el5 passed
rac1 libstdc++-4.1.2-48.el5 passed
Result: Package existence check passed for "libstdc++-4.1.1".
Check: Package existence for "elfutils-libelf-devel-0.125"
Node Name Status Comment
rac2 elfutils-libelf-devel-0.137-3.el5 passed
rac1 elfutils-libelf-devel-0.137-3.el5 passed
Result: Package existence check passed for "elfutils-libelf-devel-0.125".
Check: Package existence for "sysstat-7.0.0"
Node Name Status Comment
rac2 sysstat-7.0.2-3.el5 passed
rac1 sysstat-7.0.2-3.el5 passed
Result: Package existence check passed for "sysstat-7.0.0".
Check: Package existence for "compat-libstdc++-33-3.2.3"
Node Name Status Comment
rac2 compat-libstdc++-33-3.2.3-61 passed
rac1 compat-libstdc++-33-3.2.3-61 passed
Result: Package existence check passed for "compat-libstdc++-33-3.2.3".
Check: Package existence for "libgcc-4.1.1"
Node Name Status Comment
rac2 libgcc-4.1.2-48.el5 passed
rac1 libgcc-4.1.2-48.el5 passed
Result: Package existence check passed for "libgcc-4.1.1".
Check: Package existence for "libstdc++-devel-4.1.1"
Node Name Status Comment
rac2 libstdc++-devel-4.1.2-48.el5 passed
rac1 libstdc++-devel-4.1.2-48.el5 passed
Result: Package existence check passed for "libstdc++-devel-4.1.1".
Check: Package existence for "unixODBC-2.2.11"
Node Name Status Comment
rac2 unixODBC-2.2.11-7.1 passed
rac1 unixODBC-2.2.11-7.1 passed
Result: Package existence check passed for "unixODBC-2.2.11".
Check: Package existence for "unixODBC-devel-2.2.11"
Node Name Status Comment
rac2 unixODBC-devel-2.2.11-7.1 passed
rac1 unixODBC-devel-2.2.11-7.1 passed
Result: Package existence check passed for "unixODBC-devel-2.2.11".
Check: Package existence for "glibc-2.5-12"
Node Name Status Comment
rac2 glibc-2.5-49 passed
rac1 glibc-2.5-49 passed
Result: Package existence check passed for "glibc-2.5-12".
Check: Group existence for "dba"
Node Name Status Comment
rac2 exists passed
rac1 exists passed
Result: Group existence check passed for "dba".
Check: Group existence for "oinstall"
Node Name Status Comment
rac2 exists passed
rac1 exists passed
Result: Group existence check passed for "oinstall".
Check: User existence for "nobody"
Node Name Status Comment
rac2 exists passed
rac1 exists passed
Result: User existence check passed for "nobody".
System requirement passed for 'crs'
Pre-check for cluster services setup was successful.
=========================================================================
[root@rac1 client]# ps -ef |grep d.bin
root 10699 7654 0 13:54 pts/3 00:00:00 grep d.bin
===================================================================================
Many thanks for help

Thank you Helios . As per oracle we need to contract OS team .
It's My home system can any one help me to fine root cause ?.
many thanks .

I printed a 'preview' document and now it continues to print a never ending set of copies. I have re-installed the printer software, but it still continues to print more copies. What do I need to do to stop the document printing?

I printed a 'preview' document and now it continues to print a never ending set of copies. I have re-installed the printer software, but it still continues to print more copies. What do I need to do to stop the document printing?

Try resetting the printing system.
1. Open System Preferences > Print & Fax
2. Move your mouse over the Printers list
3. Hold down the Control button and click the mouse
4. Click the "Reset printing system ..." popup
5. Restart your Mac
This will remove your print queues but not your printer drivers. So you will only need to add your printer queues again.

I created a new administrator USER account. I deleted the original one but the process never ends. It's been 3 days now.

I created a new administrator USER account. I deleted the original one but the process never ends. It's been 3 days now. And I can't close preferences window or turn off the computer.
It's stays in the "deleting" but I can't cancel it or close the window.
What can I do?

Here are two screen shots to show you what I am seeing. The first screen shot shows it allowing me to select (highlighted in blue) my admin user (which is what I am locced in as). The second screen shot shows it allowing me to select the "Guest" user (highlighted in blue). However when I click on the user "Orion" nothing happens. It will not change to highlight that user.

Never-ending blend installation notifications

Similar Messages

Maybe you are looking for