Automated email to buyer, when email/FAX fail to vendor for a PO

Hi All,
If an email/FAX failed to transmit to the vendor for a PO, will there be a way (method) to give an email notification in buyer's inbox ??
Please provide details.
Thanks!!
Vivek.

Issue resolved
Thanks !!
Vivek

Similar Messages

AutomatTtransmission (print/email/fax) of secondary vendor freight POs

Hello,
I need one know how to set up automatic transmission of print, email or fax to secondary vendor fright POs
Thanks & Regards,
Praveen

Thanks for reply.
but how to control condition record..?
If I maintianed as 'Medium' 1 ->Printout : takesplace.
Pls share your opinion.
Regards
Ramu

When payment is made to Vendor for an open line item. Which table's updated

Hi,
When an invoice has been posted for a GR. The invoice will be pending for payment. And when the payment is made to the vendor .Which table is updated, as i need to create a functional spec for triggering a message automatically to initate vendor payment if it is due for a month. I want the table name?
Regards
Chandan

Hi,
The payment document posted is again a accounting document, the table is BKPF - Header and BSEG - Item.
In order to know if a LIV accounting document is cleared i.e payment made could be checked in the field
BSEG-REBZG. this field would carry the payment document number, which is again a accounting document ( table bkpf-bseg).
hope this helps.
Harish

How to change email/fax number retrieval logic for output...

Hi,
In my requirement, for sending the output by fax / email, for e.g. take certificate of analysis, the customer master data is checked and the data mentioned there is used to send the output. In addition, in customer master transaction XD01/XD02 I see an additional tab called contact person which has information of each contact person along with their department numbers and fax num and email ids.
In ADR3 I noticed that these are stored.
In short
In XD03, under address tab a fax num maintained which I do not want to use. Rather,
Under contact person tab , the entry which has dept number as say A100, the associated fax num is the one to which I want the COA to be sent.
Where exactly is the code that reads these entries and determines the fax number and email ids to which the output needs to be sent ? May be there I need to change the logic to include a check such that entries that have dept as A100 will be checked and those fax and email ids will be selected and set.
Or if there is any other way this can be achieved, pl advise.
thnks

Senthil,
The COA trigerring works fine. The delivery for which PGI will be done and then COA will be sent that has the output configured such that Fax will be sent. In SOST I can see the entry which shows the fax num as say 787878.
But this was the number found in the ADDRESS tab in XD03 for that ship to partner. I do not want that fax num to be used. I want the fax number that I enter in an additional tab and which is stored in KNVK and ADR3 tables.
So once SAP determines it has to fax the COA , SAP shoud be reading the ship to pary fax num, right ? Where is that code in standard SAP ? Bcos I need to change the logic to read somwhere else !! Hope you are able to follow me now ?
thnks

Email notification to Buyer when 997 is received

We have a requirement to send a notification to buyer when the 997 acknowledgement is received for the outbound PO (850). I looked at the inbound message 997 and it doed not refer the original PO document which was sent to the vendor. Is there a workaround so that we can send an email notification to the Buyer saying that the 997 was sucessfully received from the Vendor.
Thanks

Go through below few threads and your issue will be solved -
Re: How 850 matches with corresponding 997
mail- if we havn't received 997 for corresponing PO
Correlating 997's
How to correlate 850 with 997 when 997 is errored out
Regards,
Anuj

Automated error email notification when outbound IDOC fails

Hi,
The requirement is that whenever the outbound IDOC of message type PAYEXT, basic type PEXR2002, fails, then email has to be trigerred to a group id.
I had suggested to write a report program that runs as a job. If the IDOC goes to error status then mail will be sent from this report. Client prefers it to be done through workflow.
There is a standard process code for outbound IDOC failure handling EDIO (we40). standard task 7989 has been assigned to this process code. I dont want to modify this standard task as I am not sure of impact.
Terminating event for this task is 'ERRORPROCESSCOMPLETD'.
I have developed the workflow that has trigerring event 'ERRORPROCESSCOMPLETD' and bound with the IDOC number. This will send mail to the group id with the IDOC details
Now issue is that, I am not sure if standard process EDIO will be trigerred automatically, or should we configure anywhere. Since this is standard outbound IDOC, I am not able to add the process code in partner profile.
Please give your inputs or any other alternate solution to send mail through workflow when outbound IDOC fails.
Thanks in advance.

Hi,
I guess in your outbound partner profile for PAYEXT. you need to add process code EDIO in message control TAb. WHich will cause to trigger the workflow which will send the notification.

Workflow: Automated email when field(date) is updated

Gentlemen,
I am trying to implement a workflow were an automated email is send as soon as a specific date is updated. The update happens via webservice.
While testing the following criteria: [<date>] <> PRE('<date>') I found that it only sends an email when the previous value was not null. Updating from one date to the other works fine.
Since we are always updating the complete account record when a field changes in our ERP app, simply have it trigger on changes doesn't work. The workflow has to make sure the previous value was different from the new value.
I have also tried other combinations using [<date>] IS NOT NULL, however I would again need the previous expression to verify the value actually changed.
Anybody have a good workflow at hand for this type of set up?
Thanks & best regards,
Ben

Hi Ben,
You need to check for both expressions:
" (PRE('<YourField>') = [<YourField>] OR FieldValue('<YourField>') IS NULL) "
You check whether it's changed or was previously empty using the "OR" statement.
Thanks
Oli @ Innoveer

Send automated email notification when record update

Dear all,
I have a requirement where system able to send automated email/SMS alert to customers to update their status of the Service Request. Can we using current workflow for the notification to customer whenever the status being update? Please advice.
Thanks in advance.

yes, you can achieve this by using on demand, create a workflow with When a modified record trigger event and in the action select send email.
If at all you want to send email when a status update, write a function like PRE('<Status>') <> [Status]. try it and good luck.
Cheers
Subbu

Automated Email to Users when profile changes

Is there any way to turn off and on the automated email that is sent to users when their user profile changes? We are going to be doing a seris of automated updates to all users and do not want the automated emails sent out.

Is there any way to turn off and on the automated email that is sent to users when their user profile changes? We are going to be doing a seris of automated updates to all users and do not want the automated emails sent out.

Running a ALV Report in bakcground and sending it to Email/FAX

Hi,
I am designing a ALV report to send a email/fax/Printer which has to be run in background or foreground according to selection screen inputs.
I am doing the following
1. After generating ALV report, converting it to pdf
2. Sending Email or Fax or Print from selection screen value.
3. after that scheduling in background using JOB_OPEN and JOB_SUBMIT FM's.
Can I use SO_DOCUMENT_SEND_API1 FM for both Email and Fax.
When I schedule the report in the background using JOB_OPEN, at which point I have to code it inside the report. Is it after I generate the ALV Report and Email sending code or before it..
Thanks

Hi
How did you end up doing the emailing? I have the same task.....

Managing Email/Fax "Reception notifications" in SAP R/3

Hi SAP devs,
one of my clients is interested in creating a Workflow for PS in SAP R/3 4.6C that will automate the sending of eMails and Faxs when certain activities (in networks via CN22) are confirmed. The process is as follows: The activity is confirmed via CN22 and then an eMail or Fax (depending on the partner) is sent to the partner. The Workflow then goes on "stand-by" and waits for a confirmation of reception for that eMail/Fax. If after 2 business days no confirmation was received, a workitem is sent the the SAP Inbox of a group. I wanted to know if there is any technology currently available in R/3 that permits the reception of the confirmation and determins which WF the confirmation is for.
Thanks for your help
PS: sorry if it's not really clear, I tried to translate it as best I could from french.

Just to add some clarification to my problem, the sending of eMail/Fax part using the WF I have no problems with, but the reception of the confirmation notification (that the eMail was read by the user or the fax was received by the target fax) is the part we are not sure about. Basically, there can be about 150 WFs on stand-by each waiting for a notification and when one is received, how can the correct WF be told that a notification was received. This is my issue, not the WF process part.
I hope this is clearer about my issue.
Thanks for the help

Send Purchasing Documents via email/fax to vendor

Hi all,
I have a customer requirement wherein Purchasing documents such as RFQ, PO etc need to be sent to vendors via email/fax. To cater to the customer's form requirements, we developed smartforms instead of using the standard MM purchasing smartforms. To call these smartforms in the print programs, we copied the standard print program SAPFM06P and commented out the function module ME_PRINT_PO in the routine ENTRY_NEU and added the our own code to call the custom smartform. The custom code segment in the print program is attached for reference.
Now, when we are trying to generate messages for the purchasing documents using output type External Send, the custom program does not pick up the email address maintained in the vendor master and instead picks up email address maintained in RFQ or PO initiator's user profile. We have made the required configuration for SCOT and SOST tcodes.
We tested the same scenario requirement using the standard print program and got the desired results i.e. the print program picked up the email address maintained in the vendor master. But with this approach, we cannot use our custom smartform.
Any help in this matter will be appreciated.
Regards,
Saad

Hi Biju !
Thanks for the response but I think you missed the point here. I am using different output types for RFQ and PO as well as different custom smart forms and we are using the same custom print program to generate output for both.
The issue is with the print program and not the output type as I mentioned that I have already got this thing working on our IDES using the standard print program and standard forms.
Tomas Talpa's response seems to be helpful. I'll get my technical consultant to amend the code accordingly and see if it works.
Regards,
SaaD Karim Mallick.

ERS Output email/fax to different ID (CONSNUMBER) in vendor master

Hi Guru,
I am just wondering if there is a way to change the ERS output to different email/fax ID than the default one in vendor master.
As a default in SAP, the Purchasing documents ie. PO, RFQ and ERS outputs will be sent to default emial/fax (of course when we set it up to send via fax = 2 or email = 5). The problem here is that SAP will pick up default email/fax in vendor master, however, our business would like to have an ability to send ERS outputs to different email/fax ID (CONSNUMBER). Currently it is only sent to FLGDEFAULT address.
If we change the default, it will change all other documents as well. We only want to differentiate ERS output and leave other docs (PO, RFQ) to use default setting.
Is there any enhancement spot or exit that can help achieve this?
Please advise.
Cheers
BJ

Hi All,
Found where to put our codes in to cater for this requirement ==>LMRMNF01 - Form Routines for SAPLMRMN - Logistics IV: Message Control. It works wonder. Hope that will help others.
Thanks.

Retrying Email Service fails for the stalled Operations:

Hi,
Some of the send email operations randomly fails due to invalid recipients address or some connectivity issues with SMTP server. Once we do the corrections to the service, and retry those stalled operations, its erring out with Java Nullpointer exception.
Stalled operations work fine for other operations except for email service. Is this a Engineering issue with the Adobe design or do we need to change any configuration settings to make that work?
Thanks for your time.
Regards,
Krishna

Hi Aashish,
Thanks for the response. Yes, it works good for new operations. It fails with Null pointer exception if I retry the stalled ones after corrections.
This was the initial error -
Failed to connect to email server: adobemailer@xxxxx. Reason: Could not connect to SMTP host: xxxxx, port: 25, response: 421: com.adobe.idp.dsc.email.ConnectionFailedException: Failed to connect to email server: adobemailer@xxxxx. Reason: Could not connect to SMTP host: xxxxx, port: 25, response: 421
We corrected the problems with SMTP server and when we retried this stalled operation, this is what we see -
( Email has an attachment, I 'm thinking adobe is not catching up the attachments when I retry it again)
com.adobe.idp.DocumentError: com.adobe.idp.DocumentError: java.lang.IllegalStateException: No transaction
          at com.adobe.idp.Document.getDataBuffer(Document.java:2134)
          at com.adobe.idp.dsc.email.EmailServiceImpl.assembleAttachments(EmailServiceImpl.java:533)
          at com.adobe.idp.dsc.email.EmailServiceImpl.setMessageBody(EmailServiceImpl.java:496)
          at com.adobe.idp.dsc.email.EmailServiceImpl.sendWithMapOfAttachments(EmailServiceImpl.java:4 26)
          at sun.reflect.GeneratedMethodAccessor7169.invoke(Unknown Source)
          at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
Regards,
Krishna

Automated email campaign

Hello all,
We are attempting to setup a simple automated email campaign (CRM 4.0), but we seem to be missing a step.
We have a campaign with a campaign element that has a target group assigned and a channel of Email. We can test the channel successfully from within the Marketing Planner (the email gets sent). So we know the email infrastructure is working.
When we transfer the target group to the channel (either manually or via workflow), an email list is created (as checked by crmd_email_list), but no emails are sent. Is there another job that needs to be run to actually send the emails?
Thanks!

Hi Kori,
please check the TRX SCOT , to see if Mails are sent out correctly.
Over there you have to customize your mail server for the mails you send out.
Particularly check in options "default domain".
Hope this solves the problem. Please reward with points if helps.
AndreA

Automated email to buyer, when email/FAX fail to vendor for a PO

Similar Messages

Maybe you are looking for