Never Ending Screens Displayed

I need to know how to get the never ending screens from
popping up when I click on "share my screen" desktop. I am sure it
is a simple fix, but I can't figure it out.

You can't share your own console, or you get infinity
repeating on itself like you describe.

Similar Messages

Brand new Thinkstation D10 server fails to boot, no beeps or screen display

This server had been working fine for several weeks and today I needed to reboot it. It has been rebooted several times before so so I wasn't trying something new. I hit the Vista Start button and it immediately shut down. I couldn't recall if Vista prompts you to Stand-by/restart/shutdown but I think it does - this time it didn't. :/ Afterwards, it would not boot.
I tried:
Unplugging and replugging it in: it then attempted to boot but shut itself down again after about 30s.
a Power Supply Reset
Reseating the memory cards
Removing one of the 4GB memory cards
Trying the other memory card
Swapping the two memory cards
Inserting a bootable disk (it never gets to the point of reading anything although the drive spins up)
Checking that everything in the system board was plugged in
Making sure none of the wires were hitting anything else (shorting out)
When replacing that annoying cover from over the memory cards, made sure again I was not pinching any wires
The server does not beep and the (directly connected) monitor never comes alive to display anything when I attempt to reboot.
Per the docs, I observed the power supply Diagnostic LEDs and front panel Power LED while attempting to boot and only the green Diagnostic LED on the power supply is ever activated. The table indicated this means replace the system board.
Aack!
Before I head for the support # and an eventual shipment back to Lenovo, would it be worth my while to try and replace the CMOS battery? Or would a failure of that battery still have resulted in some indication of the problem (beeping and/or screen display)? Can anyone think of something else to check?
Just thought I'd ask around before assuming that I'm stuck with the system board diagnosis).
Thanks

The list of things that will make a computer power down on it's own before it can ever get into the OS or initiate a video feed is a short list.
A CPU thermal trip usually occurs within 30 seconds. This can be cause by a loose or improperly seated heat sink or a failure in the thermal grease coverage. If your D10 arrived with one CPU and you recently installed a second CPU, try taking the second CPU out. Should this work, verify the second CPU is the exact match to the first CPU and that the thermal grease is properly applied to the heat sink and the heat sink is securely mounted.
Ambient temperature thermal trip usually takes longer, but can be significantly shorten if the air baffle for the memory is not installed. Computers with high Front Side Bus frequencies result in memory DIMMS that get very hot.
DC power trip. This can happen if too much power is being drawn through any of the PCI ports or through the power supply itself.
When you are using a highend video card, check to see if the video card has it's own power connector(a small six lead box). If it does, there is a power connector, from the power supply, to plug into it. Without that power plugged in, the video card may appear to hum, and the it will draw too much power through the PCI slot.
Should you have added any additional PCI adapters, try removing these for a test. If that works, add one card back in at a time to isolate the offending PCI card.
Disconnect any USB or Firewire devices you may have attached, including the mouse and keyboard. If it comes back up and you have video, power down and reconnect the keyboard and mouse only and try again.
If you have the memory card reader option and kids, check to make certain no one has inserted something into the memory card readers. My kid inserted a quarter into one of the slots on my reader. My workstation powered down pretty fast. Consider moving the workstation to higher ground.
Last by not least, disconnect any additional optical drives you may have added. Some SATA devices have both the standard PC power connector and the SATA power connector. Do not connect both of these power sources to the same drive. The drive will be damaged and your computer will not stay powered on for very long.
Should this all fail to resolve the issue, contact Lenovo support. To make your support experience faster and more pleasurable, send them this list of things you tried. If this list of possible fixes fails, it's probably a power supply or system board issue, and I would start with the power supply.
If an electronic device has a defect it will fail within the first 90 days. Once you get it past the first 90 days, it is generally good for years.
I hope this helps!!!
Digitaloz

Front End Screen to Update Item Help Text

Hello, I've been asked to create an Apex front end screen which the Administrators can access in order to update the Help Text associated to the page items within our application (Apex 4).
I created a basic Interactive Report:
select page_id, item_name, display_as, ITEM_HELP_TEXT from APEX_APPLICATION_PAGE_ITEMS where application_id = :APP_ID;
I also have an edit page, which contains the page id (display only), item_name (display only), item_help_text (text field).
Everything is working fine, except that when the Update process fires to update the help text, I get an Insufficient Privileges error message.
Update APEX_APPLICATION_PAGE_ITEMS
set item_help_text = :p7_item_help_text
where item_id = :p7_item_id
and application_id = :APP_ID;
Just wondering, is it possible to update this APEX_APPLICATION_PAGE_ITEMS table? If not, can you please advise what the workaround would be?
Thank you,
Laura

Log on as APEX_04000 user and then grant permission to your wpplication schema user. For a example if your application schema is app_user then
Grant SELECT,UPDATE ON APEX_APPLICATION_PAGE_ITEMS to app_user;Thanks
* If this answer is helpfull or correct then please mark it and grant the points.

The screen displays hard disc not exist

The screen displays hard disc not exist i tried everything in the support section but ended up with this.

Hi,
Did it show up any code such as 3xx (xx is a hex number). Well, could be one of the following things:
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and/Hard-drive-does-not-exist/td-p/1569627
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and/hard-disk-does-not-exist-what-does-that-...
http://h30434.www3.hp.com/t5/Notebook-Lockups-Freezes-Hangs/my-laptop-says-my-hard-disk-does-not-exi...
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I created a new administrator USER account. I deleted the original one but the process never ends. It's been 3 days now.

I created a new administrator USER account. I deleted the original one but the process never ends. It's been 3 days now. And I can't close preferences window or turn off the computer.
It's stays in the "deleting" but I can't cancel it or close the window.
What can I do?

Here are two screen shots to show you what I am seeing. The first screen shot shows it allowing me to select (highlighted in blue) my admin user (which is what I am locced in as). The second screen shot shows it allowing me to select the "Guest" user (highlighted in blue). However when I click on the user "Orion" nothing happens. It will not change to highlight that user.

External monitor works only works when laptop screen displays

Hi there, I just connected a different (newer, but not brand new) external monitor to my T61. When I toggle screens (fn-f7) the external display gets no signal in the 'external display only' position, but displays beautifully in the 'both' position. This never happened with my old monitor. I would like to use the external display and not have the laptop screen display. Any ideas? Many thanks, Ellen

H
Try this:
After connecting external monitor, press win key+p and thrn choose projector only.
Have a nice day
Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)
If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

HT4623 why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon

why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon

You are in Recovery Mode. Follow the instructions below to recover your iPad.
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.

Suddenly never ending pinwheel and slower than usual

My macbook pro suddenly started to get slow and gave me a never ending pinwheel while only having Safari running. The mouse was working but no response when clicking. Only way to restart computer was by holding down the Start button. Restarted and this time the computer hang up when I tried to Log in (while writing Login and password). I mangaged to Log in two more times but I got the pinwheel again when browsing internet. Finally I managed to make it to Support/Community.. any idea what's wrong?
Thanks in advance (: !

Print out these instructions and info at the links provided as most require you to be offline.
Do a SMC and PRAM reset first, then a Hardware Test
https://support.apple.com/kb/ht3964
http://docs.info.apple.com/article.html?path=Mac/10.6/en/26871.html
https://support.apple.com/kb/ht1509
If the hardware test gives any errors, note them here.
Check the time and date on your computer to make sure it's correct.
If your still having slowdowns, pull the power plug on both the router and the modem, connect the modem and wait a bit then connect the router. Reboot your computer and it should connect automatically to your wifi. See if your slowdowns only occur if connecteted to the WiFI or not, that way it can be determined if it's a internet issue or not.
(If your still having slowdowns, it might be because you have a Open Network on your router and someone is leaching off of it. WPA 2 with AES is the only secure wifi standard))
You can test your internet connection speed here, see if it matches what your paying for.
http://www.speedtest.net/
IF your computer still has issues then:
Fish out the 10.6.x disks that came with your computer (grey) or the 10.6.3 Snow Leopard retail disk, stick it in the computer and reboot holding the c key.
(Make sure the disks are clean on the bottom, wipe with a very soft cloth and a tiny bit of rubbing alcohol to clean and don't place the disk on a harsh surface that can damage the bottom.)
Second screen in, under the Utilities menu is Disk Utility, select your drive on the left and click First Aid, Repair Disk (please write down any errors this gives and tell us) and Repair Permissions (the results there you can ignore)
Do not erase or reformat the drive.
Reboot and see if your computer works, if not repeat the c boot off the installer disk again and this time skip Disk Utility and install OS X.
It will install on top of your 10.6.8 installed version (only, not your programs or files), which when finished you reboot and immediately Software Update to 10.6.8
This should take care of anything wrong with OS X itself.
Now to clean the caches of the user and other checks.
Download the free OnyX for 10.6 and run ALL the maintenance and cleaning aspects and reboot at the end of the tasks (you can cancel in between reboots) but reboot at the end of using Onyx)
Do all the checks it asks when it starts up and note any errors here they report.
Also under the Verify Tab is a Preference (plist) check, check the "show only corrupt files" and run that, make a note of all and any corrupt plist files.
http://www.titanium.free.fr/
Plist files are preference settings files that sometimes get corrupted and may be the cause of your problems.
If you have some, then you can look in your Users/Library/Preferences folder for them and Trash them and reboot the machine and load the program responsible, the plist file gets rebuilt without your preferences which you reset.
The next thing to check would be your web browser plug-ins here
https://www.mozilla.org/en-US/plugincheck/
For Flash in Safari check here again as it's more accurate
http://flashbuilder.eu/flash-player-version.html
Download Flash and install if it's not this version (latest)
http://get.adobe.com/flashplayer/
Silverlight here
https://www.microsoft.com/getsilverlight/get-started/install/default.aspx
Finally install and run ClamXAv on your drive, this will look for known malware that might have gotten accidentally installed.
http://www.clamxav.com/
Since OS X was reinstalled, along with bundled programs like Safari, this should only leave applications and users as a source of any infection.
If your stil having issues, then create a new user and transfer your files over and when up on the new user, delete it.

Process never ends

Hi,
I'm developing -fixing somebody application- a SuperWaba application. SuperWaba is a poor minor release of Java Runtime. I'm transforming SQL Scripts into PDB files -i hate PDB files.
I make a Class that extends MainWindow that is called by Waba Applet. Waba Applet extends Java Applet -I hope so. When I run my class from the shell (cmd, over a Windows XP), an Applet Window appears and execute without erros my script transforming a SQL script in one or multiple pdb files (depending number of create sentences).
But, when i call my script from a PHP Script -i really hate this app, PHP + Java + ASP + Visual Basic ... can you believe it ? - the PHP Script launch Java, but Java app never ends blocking my PHP script. I think there is a problem in Applet Window creation, because there is no window or display to launch the app.
There is a way to run an Applet in background with no visualization ?
THX 4 Ur HELP

i really appreciate your help but i forgot to explain the problem
First, i decide to create a simple Java App that uses the PDBDriver JAR, but the #~"$%" Jar uses something from the Applet. When I run my class it launch these error.
java.lang.NullPointerException
        at java.applet.Applet.getCodeBase(Unknown Source)
        at waba.applet.JavaBridge.openOutputStream(JavaBridge.java:533)
        at waba.applet.JavaBridge.writeBytes(JavaBridge.java:588)
        at waba.io.NativeMethods4JDK.catalogClose(NativeMethods4JDK.java:824)
        at waba.io.NativeMethods4JDK$CatalogBag.finalize(NativeMethods4JDK.java: 674)
        at java.lang.ref.Finalizer.invokeFinalizeMethod(Native Method)
        at java.lang.ref.Finalizer.runFinalizer(Unknown Source)
        at java.lang.ref.Finalizer.access$100(Unknown Source)
        at java.lang.ref.Finalizer$3.run(Unknown Source)
        at java.lang.Thread.run(Unknown Source)
#2- url: file://localhost/nullfile.pdb
found under localhost: file://localhost/nullfile.pdb
file not found

Uploading never ends

my uploading to ANY site NEVER ends!!! tis problem only Firefox experiences!!! it doesn't matter what site I upload to Firefox displays a uploading and never stops for eternity!!! I tried an extension called 'upload progress' to see what the slowness is, and when it gets to 100% I NEVER get redirected to the next step in the upload progress!!! Facebook, Forums, image sites, everything I upload to experiences this issue on Firefox

Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox and any leftover program files and then reinstall Firefox. Please follow these steps one by one:
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu) and confirm all upcoming messages.
#Now, uninstall Firefox by following the steps mentioned in the [[Uninstall Firefox from your computer#w_uninstall-firefox|Uninstall Firefox]] article.
'''IMPORTANT:''' On Windows, the uninstaller has the option to remove your personal data and settings. Make sure that you do '''not''' check this option; otherwise all of your bookmarks, passwords, extensions, user customizations and other Firefox [[Profiles|user profile data]] will be removed from your computer.
After uninstalling Firefox on Windows, delete the "Mozilla Firefox" program folder, located by default in one of these locations:
* '''(On 32-bit Windows)''' ''C:\Program Files\Mozilla Firefox''
* '''(On 64-bit Windows)''' ''C:\Program Files (x86)\Mozilla Firefox''
#Go to the Windows Start menu and click on "Computer".
#In the Explorer window that opens, double click Local Disk (C:) to open the C:\ drive.
#Find the "Program Files (x86)" folder or "Program Files" folder.
#* On 32-bit Windows, double-click the '''Program Files''' folder to open it.
#* On 64-bit Windows, you will see a "Program Files (x86)" folder AND a "Program Files" folder. Open the '''Program Files (x86)''' folder.
#Look for a '''Mozilla Firefox''' folder. If you find one, right-click it and select ''Delete'' and confirm that you want to move the folder to the Recycle Bin.
Now, go ahead and reinstall Firefox:
#Double-click the downloaded installation file and go through the steps of the installation wizard.
#Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
Have a wonderful day!
~Jake

Hiding the screen display

hi folks,
I have an issue, I am executing a report program , at the end of which a screen gets displayed and the module pool program is MP400000 which in turn calls another include program MP400030 within this include program there is a perform statement which Calls an transaction screen.
CALL TRANSACTION 'PB60' AND SKIP FIRST SCREEN.
I need to hide this screen from display. I do not want this screen to be displayed.
Can I just comment it? because i want the action to be perfromed but no screen to be displayed.
How can I do this?
Thanks in advance
Vinu

I did that but I found out that it is an include program and tracked back to the main module pool program MP400400 (which is screen) displayed for infotype 4004 (related to recruitment). it does not have any executable program It looks like it is a dynamic screen.
How can i control that?
Thanks
Vinu

ThinkPad Hotkey Features Integration 3.89.0000 On Screen Display and Mute Button Fail

I am installing updates on a T400 system running WIndows 7 Pro 64-bit.
The system has been freshly factory restored and all features work properly...
After running System Restore to update to the latest drivers and recommended software, I find Thinkpad Hotkey Features Integration 3.89.0000 breaks features.
I am able to use Hotkeys to change brightness up/down, Fn+F5, Fn+F6, etc. The volume up and down keys work to change volume. The mute button does not work at all! There is no On Screen Display to show the adjustment settings for any Hotkeys.
I have found that installing the older 3.88.0000 (8jvu40ww.exe) version of ThinkPad Hotkey Features Integration works successfully with mute button functionality as well as the On Screen Display features.
Comparing what is different between the 3.89.0000 and 3.88.0000 versions, I find On Screen Display version and Full Screen Magnifier have advanced. The version information table at the bottom of the software download page is inconsistent compared to what is actually reported from the 3.88.0000 setup.exe:
Setup shows:
On Screen Display 6.71.00
Full Screen Magnifier 2.40
The table shows:
On Screen Display 6.72.00
Full Screen Magnifier 2.41
The System Interface Driver is 1.05 on all the recent versions.
With the 3.89.0000 version installed, I cannot uninstall and go back to the older version to get it working. Instead, I have to do a System Restore to a point previous to the newest install... something changes in the new version but I am not yet sure what.
I have no warranty on this system. Lenovo technical support is unwilling to entertain a conversation about solving this issue with their software unless I purchase a support package. Perhaps someone from Lenovo reads this forum and/or one of the community members has a contact or option so that I may report the issue to those who are responsible for resolving Lenovo software issues. I am hopeful they can solve it in their next release so that I do not have to hide the current version from System Update.
If anyone has ideas on what causes the latest On Screen Display or Full Screen Magnifier to disable the mute button and prevent On Screen Display from working... I would love to try and solve that problem. Additionally, if you have ideas on what prevents uninstalling and going back to an older version, that would also be helpful as I would not like to rely on System Restore.
If there is no solution other than to avoid 3.89.0000 it is what I will do and this message will help others so they do not spend hours to confirm the issue is with the 3.89.0000 version rather than suspecting hardware issues.
trying to figure out the source of the trouble.
Thank goodness Lenovo offers previous versions in a table at the bottom of the pages so we can try older versions and go back to what works. It is a shame they do not advertise a link or other option to report bugs and issues with Lenovo software/drivers directly.

This is the roulette you play with updating functions that are already working properly.
If it's not broken, don't fix it. Do the release notes describe a fix or enhancement that you want? No? Then leave it alone. Hiding updates in Lenovo Update is the easiest solution. For RChesley, in this case.
Bob, I realize that you want the function that the update is supposed to deliver, but the update has failed you. It's like installing version 1.0.0 of software sometimes, with Lenovo Update. You're never quite sure what you're going to get. There's tons of posts here that read as though the users are beta testers--installing updates and finding the bugs! So the developers can go back to the code and try again.
I've learned to never be an early adopter here.

How to make a never-ending(looping) page in DW?

I want to make a page which repeats itself on the ipad when you scroll in any direction. In essense a never ending page.
Jus began using HTML5 for our app.

Hi
You can do this just by repeating the code, but this is a sure way to stop anyone visiting your site -
The 'new' page is downloaded every time, (complete waste of bandwidth).
Your user will think that there is something wrong, so will go somewhere else.
On mobile devices bandwidth is now often limited and/or paid for.
A site that just repeats itself will on devices that can display the entire page download all the pages, ad infinitum.
PZ

The never ending Connecting to ISP mesage-but never happens

For the last week I have had no problems with my Extreme base station which connects through Dial up and is extendeded by a Airport Express station to provide coverage to several of my families laptops. Today - I asked airport to connect like always (I dont have it configured for automatic dial) and while it began dialing like normal got stuck on the message connecting to ISP. Needless to say I have tried everything including resetting it, (which by the way is the only way I can stop the connecting to ISP message on Internet Connect) I have disconnected and turning every computer off as well as the express station and physically I reset the base station via paper clip and used the Airport assistant to set the base station up like new - but no dice. Everytime it dials (and I have actually picked up the phone to listen) it makes the call but when the message Connecting to ISP is displayed the phone goes silent and the computer is stuck displaying the scrolling message that it is connecting to the ISP. But NADA! Do you think my ISP or phone company changed something??? Could it be new firmare or airport software taking effect? Man if you have any ideas - please help.

Well I got ahold of (AppleCare) - more specifically - Sean in Austin - a product specialist who took me through - tons of stuff annnnd - NADA - had to escalate it to engineering who probably won't be able to answer until Thursday. Interestingly we were able to hook up to a Apple Server without a problem but my ISP still gives the never ending "Connecting to ISP" message - later I called my ISP and they said if your able to connect the computer to there ISP but not the router - then it isnt there problem - its Apple.
STUCK till Thursday without my EXTREME! REAK
Tom

Hey i have this problem with my mac.. that its on its own shuts itself whenever i m using google chrome..i updated to yosemite but the problem never ended and i m experiecing unexplained shutdowns

hey i have this problem with my mac.. that its on its own shuts itself whenever i m using google chrome..i updated to yosemite but the problem never ended and i m experiecing unexplained shutdowns

Hi doctor.saddam,
If your MacBook Pro is shutting down unexpectedly, I would suggest that you troubleshoot using the steps in this article -
OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem." - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L

Never Ending Screens Displayed

Similar Messages

Maybe you are looking for