New actions !!

Hi All,
i have a requirement of creating a new action....in the CHARM flow after developer relaeases the transport request .. we have 2 change managers who should approve that Transport request before moving into quality....suppose if dev releases the transport request... after that 1st change manager should come and authorize it....nd then only when 1st change manager approves it 2nd change manager shud come and approve it..... but the question is while the 1st change manager is approving the transport request...nd if that transport request was not released a pop up should come that the trasnport request has not yet been released .... so how come we can perform this check when 1st change manager is approving the trasnport request !!!!
Regards,
Deadlocks
Edited by: DEADLOCKS on Jun 14, 2010 8:00 AM

You can insert delays between script steps, this may help. You can insert fractions of a second delay if you desire.
I recently had problem with an action not running consistently without errors. I discovered that the icon previews in the layers pallet was slowing down the script. I had a bunch of layers that kept trying to auto update the icon preview as the script was running. I solved the problem by adding a step at the beginning and end of the action that would hide the open pallet windows. Now it's running properly even when in accelerated mode.

Similar Messages

  • Error while creating a new action in Oracle Process Builder 10gR3.

    Hi,
    After creating a process in Oracle Process Builder 10gR3 when I am creating a
    new action then the following exception is occuring :
    ************** Exception Text **************
    System.NullReferenceException: Object reference not set to an instance of an
    object.
    at Stellent.IBPM.Actions.ActionsToolbox.Load()
    at Stellent.IBPM.Actions.SelectActionForm.ActionModuleSelectForm_Load(Object
    sender, EventArgs e)
    at System.Windows.Forms.Form.OnLoad(EventArgs e)
    at System.Windows.Forms.Form.OnCreateControl()
    at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
    at System.Windows.Forms.Control.CreateControl()
    at System.Windows.Forms.Control.WmShowWindow(Message& m)
    at System.Windows.Forms.Control.WndProc(Message& m)
    at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
    at System.Windows.Forms.ContainerControl.WndProc(Message& m)
    at System.Windows.Forms.Form.WmShowWindow(Message& m)
    at System.Windows.Forms.Form.WndProc(Message& m)
    at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
    at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
    at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr
    wparam, IntPtr lparam)
    ************** Loaded Assemblies **************
    mscorlib
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.1891 (QFEN-1.050727-1800)
    CodeBase: file:///c:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
    ActionLoader
    Assembly Version: 1.0.0.0
    Win32 Version: 1.0.0.0
    CodeBase:
    file:///C:/WINDOWS/assembly/GAC_MSIL/ActionLoader/1.0.0.0__3fc10cde1afe6713/Acti\
    onLoader.dll
    BomInterop
    Assembly Version: 1.0.0.0
    Win32 Version: 8.0.0.382
    CodeBase: file:///D:/Program%20Files/Stellent/IBPM/BomInterop.DLL
    Stellent.IBPM.Builder
    Assembly Version: 1.0.0.0
    Win32 Version: 8.0.0.382
    CodeBase:
    file:///C:/WINDOWS/assembly/GAC_MSIL/Stellent.IBPM.Builder/1.0.0.0__3fc10cde1afe\
    6713/Stellent.IBPM.Builder.dll
    System.Drawing
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
    CodeBase:
    file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/Sy\
    stem.Drawing.dll
    System
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
    CodeBase:
    file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
    Stellent.IBPM.Actions
    Assembly Version: 1.0.0.0
    Win32 Version: 8.0.0.382
    CodeBase:
    file:///C:/WINDOWS/assembly/GAC_MSIL/Stellent.IBPM.Actions/1.0.0.0__3fc10cde1afe\
    6713/Stellent.IBPM.Actions.dll
    System.Windows.Forms
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.1891 (QFEN-1.050727-1800)
    CodeBase:
    file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e\
    089/System.Windows.Forms.dll
    Infragistics2.Win.UltraWinTabControl.v6.2
    Assembly Version: 6.2.20062.34
    Win32 Version: 6.2.20062.34
    CodeBase:
    file:///C:/WINDOWS/assembly/GAC_MSIL/Infragistics2.Win.UltraWinTabControl.v6.2/6\
    .2.20062.34__7dd5c3163f2cd0cb/Infragistics2.Win.UltraWinTabControl.v6.2.dll
    System.Configuration
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
    CodeBase:
    file:///C:/WINDOWS/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50\
    a3a/System.Configuration.dll
    System.Xml
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
    CodeBase:
    file:///C:/WINDOWS/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System\
    .Xml.dll
    Infragistics2.Win.v6.2
    Assembly Version: 6.2.20062.34
    Win32 Version: 6.2.20062.34
    CodeBase:
    file:///C:/WINDOWS/assembly/GAC_MSIL/Infragistics2.Win.v6.2/6.2.20062.34__7dd5c3\
    163f2cd0cb/Infragistics2.Win.v6.2.dll
    Infragistics2.Shared.v6.2
    Assembly Version: 6.2.20062.34
    Win32 Version: 6.2.20062.34
    CodeBase:
    file:///C:/WINDOWS/assembly/GAC_MSIL/Infragistics2.Shared.v6.2/6.2.20062.34__7dd\
    5c3163f2cd0cb/Infragistics2.Shared.v6.2.dll
    Infragistics2.Win.Misc.v6.2
    Assembly Version: 6.2.20062.34
    Win32 Version: 6.2.20062.34
    CodeBase:
    file:///C:/WINDOWS/assembly/GAC_MSIL/Infragistics2.Win.Misc.v6.2/6.2.20062.34__7\
    dd5c3163f2cd0cb/Infragistics2.Win.Misc.v6.2.dll
    ************** JIT Debugging **************
    To enable just-in-time (JIT) debugging, the .config file for this
    application or computer (machine.config) must have the
    jitDebugging value set in the system.windows.forms section.
    The application must also be compiled with debugging
    enabled.
    For example:
    <configuration>
    <system.windows.forms jitDebugging="true" />
    </configuration>
    When JIT debugging is enabled, any unhandled exception
    will be sent to the JIT debugger registered on the computer
    rather than be handled by this dialog box.

    Hi Deena,
    This error:
    "[2012-07-10T14:50:30.005+05:30] [wls_ods1] [ERROR] [] [oracle.adfinternal.view.faces.config.rich.RegistrationConfigurator] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000JXkC9dU3FClqwsJb6G1FyhO000003D,0] [APP: odsm#11.1.1.2.0] Server Exception during PPR, #7[[
    javax.servlet.ServletException: Could not initialize class com.octetstring.vde.admin.services.client.VDEAdminServiceSoapBindingStub"
    is known issue
    Go to metalink, article: Unable To Connect To OVD 11g Webinterface Using ODSM. [ID 1282757.1]
    You need to apply that patch.
    I hope this helps,
    Thiago Leoncio.

  • Not able to create a new action

    I am using Photoshop  CS5 Extended Version - Student and Teacher Edition.   I am not able to create a new action.  When I open up the actions menu, the new action option is greyed out. 
    Also, there is no  "new action" icon at the bottom of my action screen like I've seen in tutorials showing how to create a new action (screen shot from a tutorial). 
    How can I get these buttons so I am able to create a new action.  I've already uninstalled photoshop and reinstalled it but have gotten the same screen menus for actions.  I've also reset the photoshop essentials settings menu but that did not help either.  What do I need to do next?
    Thanks,
    Xemena

    .... will it work if you take it off button mode?

  • Edge Animate CC 2014.1 issues with the new Actions Panel

    Hi Guys - I am totally confused with the latest undated EA CC 2014.1 actions panel.
    With the old one - its was simple :
    but the new one - I get nowhere, freezes the program and I cannot edit any actions... Very frustrating - am I doing something wrong or is it a program flaw?
    Is there tutorials I can access on the new actions panel?

    Strange. I do not think we have seen this. When you choose an action for example, you need to drill down to the element that needs the action and then double-click to apply it. Is it what you are doing?

  • How to create new actions ? in the interaction record screen

    Hi all,
    I'm working with the IC web client.
    In the interaction record screen the is a link to actions.
    But how to create new actions ? schedule actions ?
    Component "ICCMP_BT_INR"
    View "InrHeaderViewSet"

    Hi Eran,
    Gret is absolutely right ..The actions are transaction type specific and can be attached along in the customizing as mentioned above by gret , these can then be tested in the SAP gui first for their scheduled and start conditions and then in the ICWC.
    There is no special settings for actions in ICWC if they are there in your transaction they will come in the ICWC.
    Hope this helps
    Regards
    Raj

  • How do you make a new action that adds a signature?

    I want to make a new action that performs OCR, and then adds a drag and droppable signature to the top of the document. I figured out how to do the OCR, but I dont see an option for adding a signiture. How can this be done?'
    I have acrobat pro x

    There are 2 very important points:
    1. Its bundled up with other stuff, so less work and easier to use than pressing each action individually
    2. Much easier for the intended users: someone unskilled in acrobat who just wants to press 1-2 buttons and be done with it.

  • OT: Blog article on the new Actions panel in Edge Animate

    Hi all,
    For those of you still trying for ways to best work with the new Actions panel in Edge Animate, see this blog post
    The Updated Actions Panel « Adobe Edge Animate Team Blog
    Thanks,
    Preran

    I am finding the new panel really difficult to use! Thanks for this.

  • Add new action in toolbar of project document

    Hello All,
    I have checked the toolbar button Actions in Project document and it has only the following options:
    Create Auction
    Create agreement
    Create RFx 
    I've seen that when you use any of the previous actions for a Project, the new document created have the reference to the previous Project in the document link tab.
    I want to create a new action type "Create Project" to create a new project with the reference of the previous Project, but the problem is that we don´t know how to add a new action.
    Are you aware on how this could be done? What we have seen is how to create a “ToolbarScript”, but this is not exactly the same.
    Best Regards.

    Hi Fakouhi,
    Thank you for the quick response, unfortunately I couldn’t use your suggestion due I need to create a new project with different “Project Type”,with the duplicate functionality the new Project is created with the same Project Type than the previous Project.
    Is not possible create a similar customization like “Create RFx” for add the new action “Create Project” ?
    Best Regards,
    Fran.

  • Win 7 won't allow saving a new action in CS4 (32bit side)

    One would think that a clean install of CS4 under Win 7 Home Premium 64 bit would set the program to allow saving actions and presets.  I'm working in the 32 bit side (x86 Programs) because some of the filters I use aren't 64 bit compatible.  I created a new action in an action set that I had dragged over into the x86 version Presets > Actions folder and the program / system won't let me save it.  When I try I just get a Program "error". If I shift to a new file name, I get a dialog that says I don't have permission to save in that folder.  This isn't making a lot of sense since I had adequate permission to install the program on the drive and in  the programs and (x86) programs folders, I had adequate permission to drag the old action set into the Presets > Actions folder (and they work fine), but now I don't have the ability to save an action??
    Has anyone run into this or anything like it?  I really don't want to get into the idiocy of saving it to the desktop and then copying it into the Presets > Actions folder so it will overwrite and let me get on with things.
    Thanks
    Rick

    Thanks.  I finally resolved the issue by allowing the security category
    Users / Owner-PC full authority.  Actions now save as they should.  Its not
    my preferred option, but since this is a one person machine I can get away
    with it.  I suspect that your HD was set to allow Administrators full
    control (as mine was) and that running the program as an Administrator let
    the desired security permissions to work.
    Rick

  • Cannot Activate a New Action

    Hello All
    I am new to GP and trying  to create my first process..
    In GP Design time , I have created a public folder and a Content Package object consisting of an HTML page. Content package is activated. Then I created a Callable Object and included this content package and activated it..
    After the above steps , I tried to create  a new action which will start this
    active callable object and I am not able to activate this new Action..
    Can someone please help ?
    Thanks in advance,
    Santosh

    Hi Jon
    Thanks for your reply
    I am working with EP 7 SP12 .. through the portal I am using  Guided Prpocedure - > Design Time tab to access the Gallary and from there , I have created Callable objects, Actions.
    I am now able to activate the action and was able to create the process as well but I am running into another error
    Process could not be initiated:
    Please let me know if you can help..
    Thanks again
    Santosh

  • QM02 - notifications - update document flow for new action box item

    I have added a new action box item on qm02 (notifications). I am created a PO and a delivery. I wish to update the document flow to include these new records.
    I am trying to work with function qmlr_create_document_flow without success.
    Does anyone know how to do this?
    Thanks,
    rv

    Hi Rags,
    Thanks for your reply.
    About your reply:
    1) Yes, I was also thinking that 2 preceding docs may not be possible in a doc flow, and had also indicated the same to my customer. However, wanted to be 100% sure that it cannot be done.
    2) I cannot go ahead with a Service/Release Order. The requirement is to create a Return Order or a Credit Memo Request (CR) directly from the Service Notification and any other order is not in scope.
    I was thinking of something as below:
    The Service Notification header is linked to Return Order header only, there are no links at the item level. Is it a feasible solution to have a doc flow between invoice items &  return order items, since return order items are not yet linked?....I am just thinking of different things to find a solution!
    Thanks again.
    Cheers
    Vicky

  • How to add new actions in customization setting of user status ?

    Hii All
    I am tring to use user status for blocking the creation of new breakdown notification if one breakdown ntification is already pending on it. I want to set equipment under Breakdown status on equipment  when breakdown notification created on it, but when i check for setting the action in user status customization setting, cannot locate the create notification there action there & also cannot add the same in it.
    Can any body tell me how new action can be added there??
    Regards

    Makarand Gurjar,
    You won't be able to do this with user-statuses.
    See your other [VERY similar post|Blocking of Equipment for Notification creation;
    PeteA

  • New action box for Q note

    Hi ,
    I am trying to create a new action box in Q note.
    QI to Blocked, 350 movement type, MB1B.
    IMG path QM>Quality notification>Notification processing>Additional Notification Functions>Define Action box.
    while creating the new action box it needs many different thing.
    So can some one help me what I need to define as function key, sort number , Function Module Name, Business Transaction
    Code Group for Task or Activity, Function Module when Saving.
    So please help me out and if some one know the place where I can get configuration documents which can throw some light of this topic.
    Thanks in advance.     
    Best Regards

    Hi Gajesh,
    Thanks for reply, QM is not active for the materials for which we are planning to use this action.
    I am new to QM and thats why facing problem while configuring the new action Box.
    i created new action , using new function keys and sort number.
    but i am unable to find a suitable function module for the new action, i want to use movement type 350 in the same way how we use it in MB1B.
    one more information i need is shoiuld i go ahead with activity or i need to use task for these movement?
    reply , if need some more information.
    Regards

  • Add a new action type

    hi experts,
    i want to add a new reason of action type while using pa40/pa30.. can anyone help me with the steps for the same.
    Regards.

    Hi
    u can Go through this
    PM>PA>Customizing procedure>action>Define info groups>User group dependency on menus and info groups
    Enter what action u want to add
    Again go through this Menu path
    PM>PA>Customizing procedure>action>Set up personnel action is there ,Add ur action here also
    Thanks

  • Do we need to create a new EP in DAC for a new Action

    Hi,
    We have set an Action for a Task in DAC. Is it mandatory to create a new Execution Plan for this action to get reflected while the task is running.
    Thank you,
    Vinay

    If you would like to create sub-directories on the server, you can simply use a FTP program and create new directories manually.
    Muse creates /css/, /images/ and /scripts/ folders by default that it uses to store files required for the site to function properly. In addition to these, it would create an /assets/ folder if you are uploading your own static files and /phone/ and /tablet/ too if you have enabled the mobile layouts.
    If you would like to host your site to a sub-directory instead of the root, you can define a Host directory within the Publish options (for BC) or the FTP upload dialog box (for non-BC hosted sites).
    Thanks,
    Vinayak

Maybe you are looking for