New Asa 5505... Anyway to set up behind home router with no internal DNS?

Since the home router is the DNS server, the Asa has no internal DNS which is probably the cause of no internet. Is there any way around this?

Can you not simply use the ASA as the DHCP server and include the DNS server in your DHCP configuration ?
Jon

Similar Messages

RA VPN into ASA5505 behind C871 Router with one public IP address

Hello,
I have a network like below for testing remote access VPN to ASA5505 behind C871 router with one public IP address.
PC1 (with VPN client)----Internet-----Modem----C871------ASA5505------PC2
The public IP address is assigned to the outside interface of the C871. The C871 forwards incoming traffic UDP 500, 4500, and esp to the outside interface of the ASA that has a private IP address. The PC1 can establish a secure tunnel to the ASA. However, it is not able to ping or access PC2. PC2 is also not able to ping PC1. The PC1 encrypts packets to PC2 but the ASA does not to PC1. Maybe a NAT problem? I understand removing C871 and just use ASA makes VPN much simpler and easier, but I like to understand why it is not working with the current setup and learn how to troubleshoot and fix it. Here's the running config for the C871 and ASA. Thanks in advance for your help!C871:
version 15.0
no service pad
service timestamps debug datetime msec localtime
service timestamps log datetime msec localtime
service password-encryption
hostname router
boot-start-marker
boot-end-marker
enable password 7 xxxx
aaa new-model
aaa session-id common
clock timezone UTC -8
clock summer-time PDT recurring
dot11 syslog
ip source-route
ip dhcp excluded-address 192.168.2.1
ip dhcp excluded-address 192.168.2.2
ip dhcp pool dhcp-vlan2
   network 192.168.2.0 255.255.255.0
   default-router 192.168.2.1
ip cef
ip domain name xxxx.local
no ipv6 cef
multilink bundle-name authenticated
password encryption aes
username xxxx password 7 xxxx
ip ssh version 2
interface FastEthernet0
switchport mode trunk
interface FastEthernet1
interface FastEthernet2
interface FastEthernet3
interface FastEthernet4
description WAN Interface
ip address 1.1.1.2 255.255.255.252
ip access-group wna-in in
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
ip virtual-reassembly
duplex auto
speed auto
no cdp enable
interface Vlan1
no ip address
interface Vlan2
description LAN-192.168.2
ip address 192.168.2.1 255.255.255.0
ip nat inside
ip virtual-reassembly
interface Vlan10
description router-asa
ip address 10.10.10.1 255.255.255.252
ip nat inside
ip virtual-reassembly
ip forward-protocol nd
no ip http server
no ip http secure-server
ip nat inside source list nat-pat interface FastEthernet4 overload
ip nat inside source static 10.10.10.1 interface FastEthernet4
ip nat inside source static udp 10.10.10.2 500 interface FastEthernet4 500
ip nat inside source static udp 10.10.10.2 4500 interface FastEthernet4 4500
ip nat inside source static esp 10.10.10.2 interface FastEthernet4
ip route 0.0.0.0 0.0.0.0 1.1.1.1
ip route 10.10.10.0 255.255.255.252 10.10.10.2
ip route 192.168.2.0 255.255.255.0 10.10.10.2
ip access-list standard ssh
permit 0.0.0.0 255.255.255.0 log
permit any log
ip access-list extended nat-pat
deny   ip 192.168.2.0 0.0.0.255 192.168.100.0 0.0.0.255
permit ip 192.168.2.0 0.0.0.255 any
ip access-list extended wan-in
deny   ip 192.168.0.0 0.0.255.255 any
deny   ip 172.16.0.0 0.15.255.255 any
deny   ip 10.0.0.0 0.255.255.255 any
deny   ip 127.0.0.0 0.255.255.255 any
deny   ip 169.255.0.0 0.0.255.255 any
deny   ip 255.0.0.0 0.255.255.255 any
deny   ip 224.0.0.0 31.255.255.255 any
deny   ip host 0.0.0.0 any
deny   icmp any any fragments log
permit tcp any any established
permit icmp any any net-unreachable
permit udp any any eq isakmp
permit udp any any eq non500-isakmp
permit esp any any
permit icmp any any host-unreachable
permit icmp any any port-unreachable
permit icmp any any packet-too-big
permit icmp any any administratively-prohibited
permit icmp any any source-quench
permit icmp any any ttl-exceeded
permit icmp any any echo-reply
deny   ip any any log
control-plane
line con 0
exec-timeout 0 0
logging synchronous
no modem enable
line aux 0
line vty 0 4
access-class ssh in
exec-timeout 5 0
logging synchronous
transport input ssh
scheduler max-task-time 5000
end
ASA:
ASA Version 9.1(2)
hostname asa
domain-name xxxx.local
enable password xxxx encrypted
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
passwd xxxx encrypted
names
ip local pool vpn-pool 192.168.100.10-192.168.100.35 mask 255.255.255.0
interface Ethernet0/0
switchport trunk allowed vlan 2,10
switchport mode trunk
interface Ethernet0/1
switchport access vlan 2
interface Ethernet0/2
shutdown
interface Ethernet0/3
shutdown
interface Ethernet0/4
shutdown
interface Ethernet0/5
shutdown
interface Ethernet0/6
shutdown
interface Ethernet0/7
shutdown
interface Vlan1
no nameif
no security-level
no ip address
interface Vlan2
nameif inside
security-level 100
ip address 192.168.2.2 255.255.255.0
interface Vlan10
nameif outside
security-level 0
ip address 10.10.10.2 255.255.255.252
ftp mode passive
clock timezone UTC -8
clock summer-time PDT recurring
dns server-group DefaultDNS
domain-name xxxx.local
object network vlan2-mapped
subnet 192.168.2.0 255.255.255.0
object network vlan2-real
subnet 192.168.2.0 255.255.255.0
object network vpn-192.168.100.0
subnet 192.168.100.0 255.255.255.224
object network lan-192.168.2.0
subnet 192.168.2.0 255.255.255.0
access-list no-nat-in extended permit ip 192.168.2.0 255.255.255.0 192.168.100.0 255.255.255.0
access-list vpn-split extended permit ip 192.168.2.0 255.255.255.0 any
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
nat (inside,outside) source static lan-192.168.2.0 lan-192.168.2.0 destination static vpn-192.168.100.0 vpn-192.168.100.0 no-proxy-arp route-lookup
object network vlan2-real
nat (inside,outside) static vlan2-mapped
route outside 0.0.0.0 0.0.0.0 10.10.10.1 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication ssh console LOCAL
aaa authentication http console LOCAL
http server enable
http 192.168.2.0 255.255.255.0 inside
http 10.10.10.1 255.255.255.255 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec security-association pmtu-aging infinite
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group1
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-256-SHA
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set reverse-route
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto ca trustpool policy
crypto ikev1 enable outside
crypto ikev1 policy 30
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh 192.168.2.0 255.255.255.0 inside
ssh 10.10.10.1 255.255.255.255 outside
ssh timeout 20
ssh version 2
ssh key-exchange group dh-group1-sha1
console timeout 0
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
anyconnect-essentials
group-policy vpn internal
group-policy vpn attributes
dns-server value 8.8.8.8 8.8.4.4
vpn-tunnel-protocol ikev1
split-tunnel-policy tunnelspecified
split-tunnel-network-list value vpn-split
default-domain value xxxx.local
username xxxx password xxxx encrypted privilege 15
tunnel-group vpn type remote-access
tunnel-group vpn general-attributes
address-pool vpn-pool
default-group-policy vpn
tunnel-group vpn ipsec-attributes
ikev1 pre-shared-key xxxx
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect ip-options
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
inspect icmp
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:40c05c90210242a42b7dbfe9bda79ce2
: end

Hi,
I think, that you want control all outbound traffic from the LAN to the outside by ASA.
I suggest some modifications as shown below.
C871:
interface Vlan2
description LAN-192.168.2
ip address 192.168.2.2 255.255.255.0
no ip nat inside
no ip proxy-arp
ip virtual-reassembly
ip access-list extended nat-pat
no deny ip 192.168.2.0 0.0.0.255 192.168.100.0 0.0.0.255
no permit ip 192.168.2.0 0.0.0.255 any
deny ip 192.168.2.0 0.0.0.255 any
permit ip 10.10.10.0 0.0.0.255 any
ASA 5505:
interface Vlan2
nameif inside
security-level 100
ip address 192.168.2.1 255.255.255.0
Try them out and response.
Best regards,
MB

Cisco ASA 5505 VPN connection issue ("Unable to add route")

I'm trying to get IPSec VPN working onto a new Cisco ASA5505. Pretty standard configuration.
Setup:
* Cisco VPN client on Windows 7 (v5.0.07.0290 x64 on Laptop1 and v5.0.07.0440 x64 on Laptop2)
* PPPoE/NAT and internal DHCP on the ASA were configured with the Startup Wizard in ASDM
NATting is working fine - internal PCs get an IP address in the 192.168.2.0/24 range and can all access the Internet.
I wanted to be able to connect from anywhere to the ASA in order to reach one of the internal servers. Should be pretty basic.
First I tried with the built-in ASDM IPSec Wizard, instructions found here.
VPN clients can connect to the ASA, are connected (until they're manually disconnected), but cannot reach the internal network nor the Internet. Note VPN client can connect fine to a different VPN site (not administered by myself).
Client logs show following error messages:
1 15:53:09.363 02/11/12 Sev=Warning/3     IKE/0xA300005F
Firewall, Cisco Intrusion Prevention Security Agent, is not running, the client will not send firewall information to concentrator.
2 15:53:13.593 02/11/12 Sev=Warning/2     CVPND/0xE3400013
AddRoute failed to add a route with metric of 0: code 160
Destination     192.168.1.255
Netmask     255.255.255.255
Gateway     172.16.1.1
Interface     172.16.1.101
3 15:53:13.593 02/11/12 Sev=Warning/2     CM/0xA3100024
Unable to add route. Network: c0a801ff, Netmask: ffffffff, Interface: ac100165, Gateway: ac100101.
4 15:54:30.425 02/11/12 Sev=Warning/2     CVPND/0xA3400015
Error with call to IpHlpApi.DLL: CheckUpVASettings: Found IPADDR entry addr=172.16.1.101, error 0
5 15:54:31.433 02/11/12 Sev=Warning/2     CVPND/0xA3400015
Error with call to IpHlpApi.DLL: CheckUpVASettings: Found IPADDR entry addr=172.16.1.101, error 0
6 15:54:32.445 02/11/12 Sev=Warning/2     CVPND/0xA3400015
Error with call to IpHlpApi.DLL: CleanUpVASettings: Was able to delete all VA settings after all, error 0
7 20:50:45.355 02/11/12 Sev=Warning/3     IKE/0xA300005F
Firewall, Cisco Intrusion Prevention Security Agent, is not running, the client will not send firewall information to concentrator.
8 20:50:50.262 02/11/12 Sev=Warning/2     CVPND/0xE3400013
AddRoute failed to add a route with metric of 0: code 160
Destination     192.168.1.255
Netmask     255.255.255.255
Gateway     172.16.1.1
Interface     172.16.1.100
9 20:50:50.262 02/11/12 Sev=Warning/2     CM/0xA3100024
Unable to add route. Network: c0a801ff, Netmask: ffffffff, Interface: ac100164, Gateway: ac100101.
I've already tried the suggestions from this link, although the problem is different there (as the user can still access the internet, even without split tunneling, which I cannot).
A show run shows the following output (note in the below I have tried a different VPN network: 192.168.3.0/24 instead of 172.16.1.0/24 seen in the Client log)
Result of the command: "sh run"
: Saved
ASA Version 8.2(5)
hostname AsaDWD
enable password kLu0SYBETXUJHVHX encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 192.168.2.254 255.255.255.0
interface Vlan2
nameif outside
security-level 0
pppoe client vpdn group DW-VPDN
ip address pppoe setroute
ftp mode passive
access-list inside_nat0_outbound extended permit ip any 192.168.3.0 255.255.255.240
pager lines 24
logging enable
logging asdm informational
mtu outside 1500
mtu inside 1500
ip local pool DWD-VPN-Pool 192.168.3.5-192.168.3.15 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 192.168.2.0 255.255.255.0 inside
http 0.0.0.0 0.0.0.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group1
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh timeout 5
console timeout 0
vpdn group DW-VPDN request dialout pppoe
vpdn group DW-VPDN localname fa******@SKYNET
vpdn group DW-VPDN ppp authentication pap
vpdn username fa******@SKYNET password *****
dhcpd auto_config outside
dhcpd address 192.168.2.5-192.168.2.36 inside
dhcpd domain DOMAIN interface inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy DWD internal
group-policy DWD attributes
vpn-tunnel-protocol IPSec
username test password ******* encrypted privilege 0
username test attributes
vpn-group-policy DWD
tunnel-group DWD type remote-access
tunnel-group DWD general-attributes
address-pool DWD-VPN-Pool
default-group-policy DWD
tunnel-group DWD ipsec-attributes
pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:3e6c9478a1ee04ab2e1e1cabbeddc7f4
: end
I've installed everything using the CLI as well (after a factory reset). This however yielded exactl the same issue.
Following commands have been entered:
ip local pool vpnpool 172.16.1.100-172.16.1.199 mask 255.255.255.0
username *** password ****
isakmp policy 1 authentication pre-share
isakmp policy 1 encryption 3des
isakmp policy 1 hash sha
isakmp policy 1 group 2
isakmp policy 1 lifetime 43200
isakmp enable outside
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto dynamic-map outside_dyn_map 10 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 10 set reverse-route
crypto dynamic-map outside_dyn_map 10 set security-association lifetime seconds 288000
crypto map outside_map 10 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto isakmp nat-traversal
sysopt connection permit-ipsec
sysopt connection permit-vpn
group-policy dwdvpn internal
group-policy dwdvpn attributes
vpn-tunnel-protocol IPSec
default-domain value DWD
tunnel-group dwdvpn type ipsec-ra
tunnel-group dwdvpn ipsec-attributes
pre-shared-key ****
tunnel-group dwdvpn general-attributes
authentication-server-group LOCAL
default-group-policy dwdvpn
Unfortunately I'm getting the same "AddRoute failed to add a route with metric of 0: code 160" error message.
I'm very confused as this should be a pretty standard setup. I tried to follow the instructions on the Cisco site to the letter...
The only "differences" in my setup are an internal network of 192.168.2.0 (with ASA IP address 192.168.2.254) and PPPoE with DHCP instead of no PPPoE at all.
Does anyone know what's going on?

Yes, I have tried from a different laptop - same results. Using that laptop I can connect to a different IPSec site without issues.
Please find my renewed config below:
DWD-ASA(config)# sh run: Saved:ASA Version 8.2(5) !hostname DWD-ASAenable password ******* encryptedpasswd ****** encryptednames!interface Ethernet0/0 switchport access vlan 2!interface Ethernet0/1!interface Ethernet0/2!interface Ethernet0/3!interface Ethernet0/4!interface Ethernet0/5!interface Ethernet0/6!interface Ethernet0/7!interface Vlan1 nameif inside security-level 100 ip address 192.168.2.254 255.255.255.0 !interface Vlan2 nameif outside security-level 0 pppoe client vpdn group DWD ip address pppoe setroute !ftp mode passiveaccess-list inside_nat0_outbound extended permit ip any 192.168.50.0 255.255.255.224 pager lines 24logging asdm informationalmtu inside 1500mtu outside 1500ip local pool vpnpool 192.168.50.10-192.168.50.20 mask 255.255.255.0icmp unreachable rate-limit 1 burst-size 1no asdm history enablearp timeout 14400global (outside) 1 interfacenat (inside) 0 access-list inside_nat0_outboundnat (inside) 1 0.0.0.0 0.0.0.0timeout xlate 3:00:00timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolutetimeout tcp-proxy-reassembly 0:01:00timeout floating-conn 0:00:00dynamic-access-policy-record DfltAccessPolicyhttp server enablehttp 192.168.2.0 255.255.255.0 insidehttp 0.0.0.0 0.0.0.0 outsideno snmp-server locationno snmp-server contactsnmp-server enable traps snmp authentication linkup linkdown coldstartcrypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec security-association lifetime seconds 28800crypto ipsec security-association lifetime kilobytes 4608000crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group1crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAPcrypto map outside_map interface outsidecrypto isakmp enable outsidecrypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400telnet timeout 5ssh 0.0.0.0 0.0.0.0 outsidessh timeout 5console timeout 0vpdn group DWD request dialout pppoevpdn group DWD localname *****@SKYNETvpdn group DWD ppp authentication papvpdn username *****@SKYNET password ***** dhcpd auto_config outside!dhcpd address 192.168.2.10-192.168.2.40 insidedhcpd enable inside!threat-detection basic-threatthreat-detection statistics access-listno threat-detection statistics tcp-interceptwebvpn enable outside svc enablegroup-policy DfltGrpPolicy attributes vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpngroup-policy dwdipsec internalgroup-policy dwdipsec attributes vpn-tunnel-protocol IPSec default-domain value DWDDOMusername user1 password ***** encrypted privilege 0username user1 attributes vpn-group-policy dwdipsectunnel-group dwdipsec type remote-accesstunnel-group dwdipsec general-attributes address-pool vpnpool default-group-policy dwdipsectunnel-group dwdipsec ipsec-attributes pre-shared-key *****tunnel-group dwdssl type remote-accesstunnel-group dwdssl general-attributes address-pool vpnpool!class-map inspection_default match default-inspection-traffic!!policy-map type inspect dns preset_dns_map parameters message-length maximum client auto message-length maximum 512policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect ip-options !service-policy global_policy globalprompt hostname context no call-home reporting anonymousCryptochecksum:f5c8dd644aa2a27374a923671da1c834: endDWD-ASA(config)#

Help setting up small home network with PC and an imac!!!?

I have an imac in my room, and my mother has a JP PC in her room across the house. We have a router and modem on her computer(I connect to the internet through the router signal)
I just recently bought a new printer. It is a wifi printer. I was told by a friend that I need to setup a small netowrk so all the computers/printers in the house can talk to one another. Because right now my printer is installed and connected to the router signal (but my computer does not reconize it to print....)
I started a small network on my moms PC...but when I can't make a network CD like it tells me to because my computer is a Mac....how do I continue to setup this network?Can I set it up first on my mac as well???PLEASE HELP! I want to use my printer!

You can just connect the WRT54G wireless router’s LAN port to BEFSR41 router’s LAN port by using a network cable as specified in this configuring wireless router as access point article, after that can connect other computers to that wireless router with or without cable. Finally do more test to check the performance. Hope it helps.

Problems setting up a WRT54G router with Vista

My husband upgraded to Windows Vista Home Basic over the weekend (we don't have the newest version! omg!angst!woe!). Today, I got a call that our DSL was turned on, I set up the modem, got the internet working, and attempted to set up the wireless router.
I have used the setup cd, the EasyLink program, and the directions to manually set up the router. I can get the router linked up properly, I can even log into the DSL modem through the router. The problem is that I can't get any of these setup programs to recognize the router. Even putting in http://192.168.1.1 brings up a "page cannot be loaded" error in both Firefox 2.0 and IE (however, when I remove the router, I can see the DSL modem fine with it). Is there some other way to get the wireless router set up, or do I need to wait for one of the two computers with XP to arrive (yay for moving with the military) to set up the router?

Hi,
I too am having problems connecting the WRT54GS to my vista enabled pc. I have installed the software but since connecting everything my internet access is now diabolically slow. This is on the main wired machine, not wirelessly. The router is obvioulsy doing something inbetween (possibly the firewall) but this has made the speeds almost unbearable, negating the object of the new pc !!
Is there some settings I should eb checking ?
Many Thanks

Controlling multiple Macs remotely behind a router with ARD

Greetings! My problem is that I cannot access more that one computer in ARD. I have ARD installed on my Macbook and the computers I want to control are at my parents house. Remote management and login are enabled of course but the router needs to be configured to forward ports 3283 and 5900. But as far as I know these ports can be forwarded for one local ip only meaning that I have to somehow change the default 3283 and 5900 to some other ports in order to access them.
So the question is, how can I change the default ports for remote management on os x snow leopard? Other than that, does ARD offer any other way to access multiple computers behind a router?
Many many thanks!

In regards VPN, take a look at VPN-X from Birdssoft which is an easy to install and low-cost solution perfect for this purpose (among others).
Basically speaking, after having installed and configured VPN-X on your Mac and ONE remote Mac and opened the ports in the firewall you establish a connection between your and the remote network and gain complete access to the remote network.
Alternatively, you can use Teamviewer for giving support.

How to set up a mail server with a private DNS and relay over a public mail

How to set up the mail server that we can send and pick up emails inside and outside?
Our private network has the DNS name dnsname1.private.
We have our privat DNS Server and he can forward requests to outside over our router.
Our public emails are hosted by an internet provider. This dns name is dnsname2.com and dnsname2.org.
How we have to set up our mail server that we can pick up our emails from our public dnsname2.com?
And when we write an email how we have to set up it that the dnsname is dansname2.com and not dnsname1.private?

If you want to move your mailservice to your own (internal) server, start by making sure you can recieve traffic on port TCP 25 (SMTP). Some ISPs blocks this port, especially on "non business" connections.
Can you send mail from your LAN directly to where your mail is hosted using port 25 TCP or do you have to relay via your ISP?
You have a static public IP?

How do you properly set up a home network with multiple devices? I have a macbook pro, an iMac, and several other phones, tablets, roku devices, etc. Everything works properly except for when I try to access the other computer through the network.

I have an iMac and a macbook pro that I used to be able to share files between but ever since I moved 3 months ago I can't get it to work. Also, now my phone and my wife's phone are inseparably connected. She seems to be getting all of my text messages but I don't get hers. We also bought new computers right before we moved so that might have something to do with it. Both computers are on my account and have my name. Thanks in advance, it would be nice to get this working again - tired of walking ten feet with a flash drive to share files : )

The following may help with the file sharing issues: OS X Mavericks: Share your files

Setting Priority Of A Thread With An Internal Runnable

Im creating a few thread using the technique of embedding the actual runnable within the Threads constructor like below:
new Thread(new Runnable()
     public void run()
          long start_t1 = System.currentTimeMillis();
          bruteforce();
          long finished_t1 = System.currentTimeMillis();
          timetaken_t1 = (finished_t1 - start_t1);
             t1_finished = true;
          if(finished())scoreBoard();
).start();the problem im having is that I want to assign priorities to these threads. The two usual techniques:
Threadname.MIN_PRIORITY
or
Threadname.setPriority(5);
Won't work because in this technique you cannot assign the thread a name like
Thread t = new Thread(new Runnable() ....Should I not be able to use this.setPriority(5) or this.MIN_PRIORITY? They don't seem to be working for me, however maybe im placing them in the wrong place.
Any help would be great, Im really stuck for time on this one!

Above should work, or if you want you could just assign a variable to the thread.
final Thread t = {...}And use t call the thread methods.

Setting administrator permissions on Macpro with four internal hard drives.

Error message while logged n as admin "This software requires administrator or higher level permissions" when trying to install new software from cd-rom or download. ie. Quark 7.01 cd-rom, Epson scanner driver update. I am able to install these programs on my laptop running Mac OS 10.4.7.
I have verified and fixed permissions using the disk utility on the Mac Pro. I have matched adminstrator permissions and have admin access.
macpro Mac OS X (10.4.7)

I would suggest your reset both PRAM…
http://docs.info.apple.com/article.html?artnum=2238
… and the System Management Controller…
http://docs.info.apple.com/article.html?artnum=304123
… and also run the Apple Harware Tests from the Install DVD 1.

WRT600N problems setting up a home net with PDAs

Good afternoon,
I've just bought a WRT600N and I'm having problems to configure.
Network configuration: 4 computer wire connected;1 laptop and 2 PDAs (Ipaq hx47000 & Ipaq hx2490b);
OS: Windows XP Proffesional and PDAs Windows Mobile 5.
Internet cable connection.
Security at 2.4Ghz. WPA-personal + TKIP and MAC filter enabled.
No activity expected at 5 Ghz.
Problems:
- I can't connect PDAs to Internet. Only able to connect but with some difficulties (sometimes loose connection) and always have NO Internet access.
- I can't see network places from laptop or PDAs.
- I can't access to web based utility from computers only from laptop.
Steps alrady done:
- IP reserved for each PDA' MAC address..
- QoS disabled.
- Beacon interval increased to 800.
Could anyone help me to fix it?. Thanks in advance.

I looked through the User Guide for both of your PDA's. There is no mention that they support WPA encryption. They User Guide says that they only support WEP encryption.
Unless HP (or Microsoft Windows Mobile) has released some new wireless drivers for your PDA's, it looks like they won't do WPA.
If you believe that you have the WPA drivers, then I would suggest that you first connect your PDAs using no encryption and no MAC address filtering. If this works, then turn on only the WPA encryption. If this works, try the MAC address filtering.
Message Edited by toomanydonuts on 04-21-2008 06:24 AM

Setting up bt home hub with airport extreme and timecapsule

Hi I am running BT Broadband direct into a BT Home Hub (Black version) then ethernet into an airport extreme.
Timecapsule then extending the apple network and an iMac ethernet into the timecapsule
Various other macbooks, iPhones,iPads, iPods and apple tv wirelessly linked in. (and an hp multifunction printer)
The network seems very slow and unstable - any suggestions on how to tune it?
Thanks
Nigel

Introducing wireless repeater or bridge causes double hopping wireless. It greatly reduces speed and efficiency of wireless. I am not 100% sure I understand your arrangement. But there are limited wireless channels and the result of many wireless devices fighting each other is bad.
1. Do you have wireless turned off in the Home Hub? Please do unless it is providing important connections.
2. What mode is the AEBS running in? Because with BT you must use the home hub as a router, you should have the AEBS bridged. Is that the case?
3. Wireless extending networking adds issues as stated. Get rid of this. The best method is to link the TC and AEBS by alternative.. ie ethernet is the best by huge margin. If you cannot do this in your house then use EOP adapters. They are not foolproof but if they work, they keep working with reliability and stabilty and speed that wireless cannot match. You can then run the AEBS and TC as roaming WAP, by using different channels but same SSID (wireless name), and security settings and passwords.

Need HELPS! ASA 5505 8.4 Cisco VPN Client cannot ping any internal host

Hi:
Need your great help for my new ASA 5505 (8.4)
I just set a new ASA 5505 with 8.4. However, I cannot ping any host after VPN in with Cisco VPN client. Please see below posted configuration file, thanks for any suggestion.
ASA Version 8.4(3)
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
switchport access vlan 2
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 172.29.8.254 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 177.164.222.140 255.255.255.248
ftp mode passive
clock timezone GMT 0
dns server-group DefaultDNS
domain-name ABCtech.com
same-security-traffic permit inter-interface
object network obj_any
subnet 172.29.8.0 255.255.255.0
object service RDP
service tcp source eq 3389
object network orange
host 172.29.8.151
object network WAN_173_164_222_138
host 177.164.222.138
object service SMTP
service tcp source eq smtp
object service PPTP
service tcp source eq pptp
object service JT_WWW
service tcp source eq www
object service JT_HTTPS
service tcp source eq https
object network obj_lex
subnet 172.29.88.0 255.255.255.0
description Lexington office network
object network obj_HQ
subnet 172.29.8.0 255.255.255.0
object network guava
host 172.29.8.3
object service L2TP
service udp source eq 1701
access-list VPN_Tunnel_User standard permit 172.29.8.0 255.255.255.0
access-list VPN_Tunnel_User standard permit 172.29.88.0 255.255.255.0
access-list inside_access_in extended permit icmp any any
access-list inside_access_in extended deny tcp any any eq 135
access-list inside_access_in extended deny tcp any eq 135 any
access-list inside_access_in extended deny udp any eq 135 any
access-list inside_access_in extended deny udp any any eq 135
access-list inside_access_in extended deny tcp any any eq 1591
access-list inside_access_in extended deny tcp any eq 1591 any
access-list inside_access_in extended deny udp any eq 1591 any
access-list inside_access_in extended deny udp any any eq 1591
access-list inside_access_in extended deny tcp any any eq 1214
access-list inside_access_in extended deny tcp any eq 1214 any
access-list inside_access_in extended deny udp any any eq 1214
access-list inside_access_in extended deny udp any eq 1214 any
access-list inside_access_in extended permit ip any any
access-list inside_access_in extended permit tcp any any eq www
access-list inside_access_in extended permit tcp any eq www any
access-list outside_access_in extended permit icmp any any
access-list outside_access_in extended permit tcp any host 177.164.222.138 eq 33
89
access-list outside_access_in extended permit tcp any host 177.164.222.138 eq sm
tp
access-list outside_access_in extended permit tcp any host 177.164.222.138 eq pp
tp
access-list outside_access_in extended permit tcp any host 177.164.222.138 eq ww
w
access-list outside_access_in extended permit tcp any host 177.164.222.138 eq ht
tps
access-list outside_access_in extended permit gre any host 177.164.222.138
access-list outside_access_in extended permit udp any host 177.164.222.138 eq 17
01
access-list outside_access_in extended permit ip any any
access-list inside_access_out extended permit icmp any any
access-list inside_access_out extended permit ip any any
access-list outside_cryptomap extended permit ip 172.29.8.0 255.255.255.0 172.29
.88.0 255.255.255.0
access-list inside_in extended permit icmp any any
access-list inside_in extended permit ip any any
access-list inside_in extended permit udp any any eq isakmp
access-list inside_in extended permit udp any eq isakmp any
access-list inside_in extended permit udp any any
access-list inside_in extended permit tcp any any
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool ABC_HQVPN_DHCP 172.29.8.210-172.29.8.230 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
asdm history enable
arp timeout 14400
nat (inside,outside) source static orange interface service RDP RDP
nat (inside,outside) source static obj_HQ obj_HQ destination static obj_lex obj_
lex route-lookup
nat (inside,outside) source static guava WAN_173_164_222_138 service JT_WWW JT_W
WW
nat (inside,outside) source static guava WAN_173_164_222_138 service JT_HTTPS JT
_HTTPS
nat (inside,outside) source static guava WAN_173_164_222_138 service RDP RDP
nat (inside,outside) source static guava WAN_173_164_222_138 service SMTP SMTP
nat (inside,outside) source static guava WAN_173_164_222_138 service PPTP PPTP
nat (inside,outside) source static guava WAN_173_164_222_138 service L2TP L2TP
object network obj_any
nat (inside,outside) dynamic interface
access-group inside_in in interface inside
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 177.164.222.142 1
route inside 172.29.168.0 255.255.255.0 172.29.8.253 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server Guava protocol nt
aaa-server Guava (inside) host 172.29.8.3
timeout 15
nt-auth-domain-controller guava
user-identity default-domain LOCAL
http server enable
http 172.29.8.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set Remote_VPN_Set esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set Remote_vpn_set esp-3des esp-md5-hmac
crypto ipsec ikev2 ipsec-proposal AES256
protocol esp encryption aes-256
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES192
protocol esp encryption aes-192
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES
protocol esp encryption aes
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal 3DES
protocol esp encryption 3des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal DES
protocol esp encryption des
protocol esp integrity sha-1 md5
crypto dynamic-map outside_dyn_map 20 set ikev1 transform-set Remote_VPN_Set
crypto dynamic-map outside_dyn_map 20 set reverse-route
crypto map outside_map 1 match address outside_cryptomap
crypto map outside_map 1 set peer 173.190.123.138
crypto map outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5
ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ES
P-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 1 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto ikev2 policy 1
encryption aes-256
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 10
encryption aes-192
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 20
encryption aes
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 30
encryption 3des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 40
encryption des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 enable outside
crypto ikev1 enable outside
crypto ikev1 policy 1
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 43200
crypto ikev1 policy 10
authentication crack
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 20
authentication rsa-sig
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 30
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 40
authentication crack
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 50
authentication rsa-sig
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 60
authentication pre-share
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 70
authentication crack
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 80
authentication rsa-sig
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 90
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 100
authentication crack
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 110
authentication rsa-sig
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 120
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 130
authentication crack
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 140
authentication rsa-sig
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 150
authentication pre-share
encryption des
hash sha
group 2
lifetime 86400
telnet 192.168.1.0 255.255.255.0 inside
telnet 172.29.8.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd auto_config outside vpnclient-wins-override
dhcprelay server 172.29.8.3 inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
enable outside
group-policy ABCtech_VPN internal
group-policy ABCtech_VPN attributes
dns-server value 172.29.8.3
vpn-tunnel-protocol ikev1
split-tunnel-policy tunnelspecified
split-tunnel-network-list value VPN_Tunnel_User
default-domain value ABCtech.local
group-policy GroupPolicy_10.8.8.1 internal
group-policy GroupPolicy_10.8.8.1 attributes
vpn-tunnel-protocol ikev1 ikev2
username who password eicyrfJBrqOaxQvS encrypted
tunnel-group 10.8.8.1 type ipsec-l2l
tunnel-group 10.8.8.1 general-attributes
default-group-policy GroupPolicy_10.8.8.1
tunnel-group 10.8.8.1 ipsec-attributes
ikev1 pre-shared-key *****
ikev2 remote-authentication pre-shared-key *****
ikev2 remote-authentication certificate
ikev2 local-authentication pre-shared-key *****
tunnel-group ABCtech type remote-access
tunnel-group ABCtech general-attributes
address-pool ABC_HQVPN_DHCP
authentication-server-group Guava
default-group-policy ABCtech_VPN
tunnel-group ABCtech ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group 173.190.123.138 type ipsec-l2l
tunnel-group 173.190.123.138 general-attributes
default-group-policy GroupPolicy_10.8.8.1
tunnel-group 173.190.123.138 ipsec-attributes
ikev1 pre-shared-key *****
ikev2 remote-authentication pre-shared-key *****
ikev2 remote-authentication certificate
ikev2 local-authentication pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map global_policy
class inspection_default
inspect pptp
inspect ftp
inspect netbios
smtp-server 172.29.8.3
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:6a26676668b742900360f924b4bc80de
: end

Hello Wayne,
Can you use a different subnet range than the internal interface, this could cause you a LOT of issues and hours on troubleshooting, so use a dedicated different Ip address range...
I can see that the local Pool range is included into the inside interface Ip address subnet range, change that and the related config ( NAT,etc, ) and let us know what happens,
Regards,
Julio
Security Trainer

DNS Server problems with ASA 5505

Hi guys,
we setup a new ASA 5505 which is mainly used as our VPN gateway. The ASA is configured and controlled by our ISP (and this is where the problem starts )) and they somehow cannot manage to get the VPN settings really working.
So, here is our problem.
our machines(Windows 7) are configured to get the network settings through DHCP (Windows 2012 Server).
Before I connect with AnyConnect to our VPN gateway, the DNS Server setting in the network settings for the adapters(IPv4) are set to 'dynamic'
When I now connect, this setting is changes to a statc entry (which is our DNS server).
When disconnecting, it is not reverted back, which means I have to do this always manually.
What I do not understand is the fact, that the DNS server is set for all the adapters, shouldtn't it be only set to the anyconnect adapter?.
The interesting thing is, that when I connect to a different ASA, this does not happen. The ISP is now saying, that the machines are configured exactly the same and that they cannot reproduce, but I can't believe this.
This issue shows up at every machine which connects to our vpn, so it is not only a single machine which might be misconfigured.
Do you have any idea what might cause this issue?
btw, the second ASA (which works) is from our partner company, so we cannot simply copy the config
THanks in advance
Patrick

Nice to see someone from BT has addressed your issue
I have this exact same problem, seems completely bizarre, I'm pretty sure I had the same problem with the original home hub (i have the latest one now). Can you confirm whether the problem does affect anyone with a bt home hub and not just the one that the dyndns is pointing at? I'll try and confirm by hitting your domain from my home connection.

Problems with basic config ASA 5505

new ASA 5505, tying to configure it, inside LAN is 192.168.2.x/23 (255.255.254.0). I connect to ASA5505 using ASDM ok when it is on the default 192.168.1.1. I change the ip on 'inside' vlan, and of course lose connection to it. It apparently doesn't totally save the info, though, because I can't connect to it using the new info. So, I made a vlan3, using port 0/2, using ip of 192.168.2.x/23 while connected to 192.168.1.1. Then I changed ip of my computer from 192.168.1.x to 192.168.2.x/23 but cannot even ping that port/ip on the ASA while connected to port 0/2. I switched computer back, and connected again to 192.168.1.1 and it does appear that my new settings for 0/2 are still there, so I'm not sure how to proceed? Thanks.

Sorry, had family emergency and was off for 2 weeks, then when came back had other work to catch up on.
Thanks for the reply. It would appear that the command you provided sets it back to default settings. I was able to set it back to default settings, but am now unsure as how to proceed to get the "inside" set to 192.168.2.0/23 and still be able to access it.
If I go back in, I can change "inside" to 192.168.2.1/23, but lose connection, so it "sort of" gets saved, in the respect that sometimes I can ping it, sometimes not. But can never connect to it.
Thanks, and sorry again about the delay.

New Asa 5505... Anyway to set up behind home router with no internal DNS?

Similar Messages

Maybe you are looking for