New class created not appearing for users

Hi Friends
I have created a Course and then the offering for that course. I created a class as well for that offering. While creating the course I selected the organization in the learner access. The course is future dated in February.
However when an employee from that organization is searching for that course it does not appear. The class is in Planned state. My EBS is 12.1.3. Any idea why this class is not appearing when the learner is searching for that class.
Also another question when I select the organization in the learner access and include all the orgs in the hierarchy, does it mean that all the orgs under that org will be included in the learner access.
Thanks in advance

Hi,
The process you have described sounds right. You should contact Oracle Support, they will be able to help you find out what is missing.
The answer to your second question is "Yes".
Regards Anders Northeved

Similar Messages

  • Variable not appearing for User

    Hi everyone!
    I have a query which the user have been using for quite some time and it was working fine. When the query is run the user has option of 3 input variables.
    Today, all of a sudden, the 3rd variable does not show up for that user. The query runs fine for every other user. I mean all 3 input variables show up.
    Some how only for this particular user, the 3rd variable does not appear.
    Has any one encountered this situation. Can any one provide me some possible areas to look into as to what might have changed or what could be causing this problem.
    All your help is appreciated.
    Thankx!
    Kumar.

    Hi Raj,
    I did try to remove the personalization on the user's system. But the variable still did not appear. I noticed few more things. The variable is "Site ID" (custom one).
    1) The  Site variable does not appear even on other queries only for this user.
    2) I tried to make the user use another system and run the query, it still does not appear.
    3) I created another query for user just to display the Site ID without any variable. It runs fine. When I created a selection variable for Site ID on the same query now the variable again does not appear.
    So I think it must be either a change in authorization or change in definition.
    Can you think of any other issue it might be encountering?
    Thankx!
    Edited by: kumar saurabh on Aug 25, 2008 4:50 PM

  • Responsibility not appearing for user after added from System Administrator

    Hi,
    I'm testing on R11510. After adding more responsibilities to a user from system administrator -> user -> define, logout and login to the user, the new responsibilities didn't show up. Anything I missed?
    Thanks for your help.

    Hi,
    Did you try to bounce Apache and see if it helps?
    Please see the suggested solutions in the following threads.
    Responsibility not appearing
    Re: Responsibility not appearing
    Assigned Responsibility Not Visible on Login through AppsLocalLogin.jsp
    Re: Assigned Responsibility Not Visible on Login through AppsLocalLogin.jsp
    Regards,
    Hussein

  • Why does one tag out of four not appear for users accessing a single Thunderbird account via multiple computers?

    Four users share a single Thunderbird email account (version 24.5.0) on their four respective computers. Each user is represented by a tag color to designate which emails they are responsible for. One user is having trouble seeing when their tag is used by the other three users, the email appears untagged. However, the other three users see it as tagged. Likewise, when that one person uses the tag, the other three cannot see the email as being tagged. This is not an issue when the other three tags are used between the four people.
    We have checked that we are all using the exact same color to represent the tag, and that we are all using the same IMAP settings. Does anyone know why this might be happening?

    Are you sure the odd one out is IMAP? sounds like it is pop to me.

  • New IR's not appearing in Views for non-admins

    We are in pre-production testing for SM 2012 SP1.  We only have a few user roles beside the built in roles.  We have a 'standard' group
    which has access to just about everything except for sensitive items relating to user termination, legal, etc.  We have a group which can see those sensitive items, and then we the built in administrators.  <o:p></o:p>
    When non-admins create an IR or SR, it sometimes takes up to 5 minutes for the item to show up a custom “all open incidents”
    view, or in a custom “my incidents” view.  In a few isolated cases, the work item did not appear for over an hour.  However, admins can see all of these work items immediately in any view that should, by criteria, be displaying it.<o:p></o:p>
    What would cause a work item to display immediately in all appropriate views for admins, but not for non-admins?<o:p></o:p>

    Sorry for the delay in updating.  Our management team got very frustrated with the performance and nearly killed the whole project.  I got them to give SM another chance with R2, hoping that some of issues would be resolved.  This issue was
    not resolved.
    So, I have continued testing.  I cleaned up our Queues, so we only have 4 now in the Queues list.  When I open the properties of the our custom user role, the Queue section displays our 4 queues, plus one called Work Item Group from the System
    Work Item Library.  I started with selecting just 1 Incident queue, for this user role.  I created a new IR as this user, and it took nearly 15 minutes for the IR to appear in the view.  
    I then modified the user role and selected the "All work items can be accessed" radio button.  I created another IR and it appeared in the view immediately.  Now, this is where it gets interesting.   I went back to the user role and set it
    back to display a single queue, and the IR disappeared from the view.  It didn't appear again for another 10 minutes.
    The queue that is this IR should be assigned to is quite simple.  Right now, I want it to display all incidents.  It is not looking at an advanced class, just incident.  Initially, I did not upt any criteria on it at all.  I then tried
    setting it to just Active Incidents, and still the IR's takes 10-15 minutes to appear.
    I still don't understand what an aggressive queue is.  Does my queue sound 'aggressive?'  The view is looking at Incident (typical), not advanced.  I don't see any obvious problems in the Workflow Status section of the Admin pane.  What
    should I be looking for next?  I need to have the ability to filter queues by user roles, but it will cripple productivity if new IRs do not appear for 10-15 minutes.

  • Created a new folder in bookmarks; when try to add new bookmark, new folder does not appear in drop down menu; using safari for windows

    created a new folder in bookmarks; when try to add new bookmark, new folder does not appear in drop down menu; using safari for windows

    You are using an older version of firefox, upgrade your browser to Firefox 8 and try
    * getfirefox.com

  • Mac user, OSX 10.9.4. CS6, in the new Blur gallery the pin with adjusters does not appear for any of the three blur filters. This may have occurred since taking adobe watermark add-on and updating Bridge. any ideas?

    Mac user, OSX 10.9.4. CS6, in the new Blur gallery the pin with adjusters does not appear for any of the three blur filters. This may have occurred since taking adobe watermark add-on and updating Bridge. any ideas?

    I am using Mac OSX 10.10.1 (memory 8 GB 1600 MHz DDR3, graphics Nvidia GeForce GT 650M 1024 MB)
    and my version of Photoshop is CC.
    I ran into  the same problem: I am able to place and view Blur Gallery pins but the adjustment wheel or outer control arounf the pin that allows you to tweak the blur value disappeared after being initially available. Additionally, the placed pin or pins appear to flicker on screen (while in blur gallery mode) until committing the change with the OK button. I have tried restarting both the computer and Photoshop, as well as what some other users have suggested such as View>Show>Edit pins turned on. Nothing has helped so far. I am still able to adjust the blur amount  from the Blur Tools slider. thank you.

  • My icloud account on my new iphone does not match the user ID for itunes as it is an old apple ID. There is no password for this ID so I cant change it and it wont let me change the apple ID. Any help?

    my icloud account on my new iphone does not match the user ID for itunes as it is an old apple ID. There is no password for this ID so I cant change it and it wont let me change the apple ID. Any help?

    To change to iCloud ID on your phone you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID then sign in with the new ID.  If you don't know the password for the old ID, and if the old ID is an earlier version of your current ID, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • New EIT Not appearing for Organization classification

    Hi all,
    I have set up a new EIT for the organization. I have run the scripts for populatting
    the information_type in the hr_org_information_types table and also hr_org_info_types_by_class but the new EIT is not appearing in the new classification.
    Can someone help me as to what I have missed out.
    Thanks
    Shekar.

    Shekar,
    1. Oracle HRMS Configuring, Reporting, and System Administration Guide (A95418-02)
    Setting Up Extra Information Types for an Organization Classification
    2. Note 70122.1 -> EIT: Extra Information Type Issues
    3. Note 267462.1 -> Organization EIT Not Displayed
    Regards,
    Greg

  • New camera profile not "appearing" in ACR, but does in Lightroom

    I recently created a camera profile for a Nikon D200, using an X-Rite Colorchecker chart photo and the Chart feature in the DNG Editor.  I exported the camera profile.  When I go to the Calibration tab in ACR 5.5, the new profile does not appear in the drop down list with the other camera profiles.  However, when I go to the Develop module in Lightroom 2.5, the new profile does appear in the drop down list there.
    I am running Windows 7.  Snooping around my root drive I find that if I look within the Users\User Name\AppData\Roaming\Adobe\CameraRaw\CameraProfiles directory (referenced in the Fraser and Schewe CS4 Camera Raw book as the Vista location for the profiles) I can find no camera profiles and when I place the new profile there it still does not appear in ACR.  When I look in ProgramData\Adobe\CameraRaw\CameraProfiles\Camera\Nikon D200    directory I can see the regular set of camera profiles for the camera, as well as the one I created, but as I previously stated, the newly created profile does not appear in the ACR list.
    A side note - I did some experimentation with camera profile names.  I added "XX" to the end of the Nikon Vivid profile name (not the extension), and then that profile no longer appears in the ACR list of profiles.  I removed the extra letters and then the profile reappears in the ACR list of profiles.  Seemed odd behavior to me.  I also noticed that the profile I created with DNG Editor is noticeably smaller than the others provided by Adobe (28K compared to 110k).
    Hope someone has a suggestion for me.

    Your reminder about both Photoshop (main) and Bridge needing to be shut down for changes to take effect reminded me that I had Bridge set to "auto-start at log-in".  So I checked and it was still running (shown with the other hidden icons).  When I "shut it down" from the UI I had thought it was fully terminated.  So I completely shut Bridge down, restarted, and the new profile now appears.
    Thanks for the reminder/pointer in the right direction.

  • Class is not appearing in "Java Batch Job Class Search" when trying to add.

    Hi,
    I have oracle CC&B 2.3.1, with SDK 2.2.0.12. I am trying to create new java batch job class by copying an existing one and modifying it to be used with new Batch Control .
    Steps are as follows:
    1-Created file by copying the exiting file
    CreateLatePaymentChargesProcess.java ; and only changing the name of the class:
    public class CmCreateLatePaymentChargesProcess
    extends CmCreateLatePaymentChargesProcess_Gen
    File location :
    D:\spl\ccb231\applycm\ssgc_patch\java\source\cm\ CmCreateLatePaymentChargesProcess.java
    D:\spl\ccb231\applycm\ssgc_patch\java\source\cm\ CmCreateLatePaymentChargesProcess_Gen.java
    2-Run ApplyCm build successfully , which generated these files:
    D:\spl\ccb231\java\target\cm\com\splwg\ccb\domain\billing\batch\ CmCreateLatePaymentChargesProcess.class
    D:\spl\ccb231\java\target\cm\com\splwg\ccb\domain\billing\batch\ CmCreateLatePaymentChargesProcess_Gen$1.class
    D:\spl\ccb231\java\target\cm\com\splwg\ccb\domain\billing\batch\CmCreateLatePaymentChargesProcess_Gen$CmCreateLatePaymentChargesProcessWorker_Gen$ThreadParameters.class
    D:\spl\ccb231\java\target\cm\com\splwg\ccb\domain\billing\batch\CmCreateLatePaymentChargesProcess_Gen$CmCreateLatePaymentChargesProcessWorker_Gen$ToDoProperties.class
    D:\spl\ccb231\java\target\cm\com\splwg\ccb\domain\billing\batch\CmCreateLatePaymentChargesProcess_Gen$CmCreateLatePaymentChargesProcessWorker_Gen.class
    D:\spl\ccb231\java\target\cm\com\splwg\ccb\domain\billing\batch\CmCreateLatePaymentChargesProcess_Gen$JobParameters.class
    D:\spl\ccb231\java\target\cm\com\splwg\ccb\domain\billing\batch\CmCreateLatePaymentChargesProcess_Gen.class
    All the above classes are part of CM.jar file
    ContextManagedObjects.xml ;  contains these information
    <com.splwg.shared.environ.ContextManagedObjectData>;
    <domainPackages/>
    <lookupFieldClasses class="tree-map">
    <no-comparator/>
    </lookupFieldClasses>
    <cobolAlgorithmInterfaceExtensions class="tree-map">
    <no-comparator/>
    </cobolAlgorithmInterfaceExtensions>
    </com.splwg.shared.environ.ContextManagedObjectData>;
    packageMetaInfo.xml was not created
    Still the class is not appearing in "Java Batch Job Class Search" when trying to add a new program name referencing this java class.
    I tried restarting the Tomcat application server, still not appearing.
    Where did I go wrong about it?
    Thanks
    Edited by: cc&amp;amp;amp;b-user on Jul 29, 2011 12:39 AM
    Edited by: ccb-user on Aug 2, 2011 9:28 PM
    Edited by: ccb-user on Aug 7, 2011 11:36 PM

    Hi,
    Did you copying the base file CreateLatePaymentChargesProcess.java?
    I also create a new batch job which copying the CreateLatePaymentChargesProcess batch code the only difference in getBills() method query and inner class CreateLatePaymentChargesProcessWorker extend CmCreateLatePaymentChargesProcessWorker_Gen, instead of CreateLatePaymentChargesProcessWorker_Gen.
    The batch is working fine in my end.
    Thanks,
    Atul Singh.

  • Create a screen for user input in BI

    Hi Experts,
    I want to know can i creat a screen for user input in BI with module pool programing
    and i want to store the data in ztable in SAP-BI.
    Moderator message: please search for available documentation, these forums are no substitute for ABAP training.
    Edited by: Thomas Zloch on Dec 10, 2010 8:37 PM

    I'm afraid that I cannot get it. I had a look at the docs you suggested before posting, and still, no luck (...)
    JOptionPane.showMessageDialog(dialog, "Please input info");Can you please tell me what I'm doing wrong and I cannot add the JDialog to the JOptionPane?Re-read the API and tutorial. JOptionPane is meant specifically to spare you from instantiating manually a JDialog. The showXxxDialog(...) methods do create a JDialog of their own, based on the contents supplied as arguments.
    In particular, using the 2-arguments variation showMessageDialog(Component parentComponent, Object message):
    - The first argument parentComponent is not be the dialog you want to display, but the component over which you want the dialog to appear. The most typical value are this or null.
    - The second argument is the "message" to display, but as described in the API, it can be a JComponent, that is, even a JPanel with child widgets (in a word, a JPanel containing the specific form you'd display in the dialog if you were writing the dialog manually).
    Again, at the risk of insisting densely, I'm only quoting the API an tutorial, so please read them attentively.
    Edited by: jduprez on Nov 2, 2009 2:29 PM - Sorry Kevin, hadn't seen you latest reply. I completely subscribe to the thought process you recommend.
    Edited by: jduprez on Nov 2, 2009 2:32 PM
    Thinking about it further, I don't completely subscribe... Indeed it looks like a bad idea to make the OP wonder about dialog.setVisible() when JOptionPane enables him to forget about the hand-made dialog. I stand by my own advice ("JDialog" should not even appear in this code extract).

  • AED not appearing for utilization

    Hi all
    I am reposting the question having hopes of getting replies..
    A similar question asked in this forum has also been included.
    This particular case is for import trading scenario
    Purchase Order is made in MM and during MIGO excise invoice is captured.Addnl CVD value 4% will be taken as AED.The same can be displayed in transaction J1IG.
    Client has the requirement of displaying AED in J1IJ while capturing the excise invoice created during MIGO itself i.e, during goods inward as the same will be considered for RG23D reporting purposes.
    But AED (Addl CVD 4%) is not being displayed in J1IJ for depo sales.
    Also there is no field called as AED for capturing the same in J1IJ,but there are additional fields TAX1 and TAX2 in J1IJ.
    BED,ECS,SEcess is transferred from J1IG to J1IJ but not AED
    Awaiting all your useful feedbacks to display AED in J1IJ
    similar question posted in the forum on Jul 8..
    AED not appearing for utilization-Urgent  
    Posted: Jul 8, 2008 4:01 PM           
    Click to report abuse...      E-mail this message      E-mail this message             Click to reply to this thread      Reply
    Hi All,
    I am having input credit available for AED whereas the payable amount is not there for AED. So I want to utilise this AED amount against other payable amounts but this AED credit balance is not showing for utilization. When I have checked for other plant where AED payable is available then the AED input credit is also showing for utilization.
    I have checked the CIN settings: In excise registration details for the plant, the Liable to AED option is ticked and under Account determination settings--- RG23 AED account has been assigned to UTLZ ETT.
    Can anybody please suggest that what other settings needs to be done or is there any specific settings for cross utilization which I might have missed out on.
    Thanks & Regards,
    Antima
    any inputs guys...........
    Rgds
    Shashidhar

    Hi,
    If i am correct you are referring to ADC (Additional Customs duty) in case of imports. This duty value is similar to AED (In screens it will be in AED column only) but in customization you will be using subtransaction type "IP" to differentiate AED from ADC, you need to maintain G/L accounts for Excise transaction types and subtransaction type IP, so that the duty values are passed on to those G/L accounts.
    Cheers,
    Santosh

  • After GL Year opening the months of new year are not appearing in open period window of Gl?

    Hi All,
    After GL Year opening the months of new year are not appearing in open period window of Gl? Am i missing any thing???
    regards
    Shahzad M. Saleem

    Have you checked GL setups
    Setup accounting manager >
    Query your OU >
    Under setup steps click on Update for ledger
    Under accounting calendar
    Number of future enterable periods.

  • TS1538 My the new ipad does not appear in itunes,  Pls help

    My ipad does not appear in Itunes to restore or back up data. Thestatus of my device are:
    - updated the latest Itunes version 10.6 .
    - tried to restart Apple Mobile Device in Window but it still doesn't work.
    - Could not restore in DFU becasue the window doesn't recognize ipad. It appeared cable & itunes disk images but it itunes does not recognize.
    - When i pluged the ipad in my laptop, window could not reconize ipad neither.
    Please help to solve it!

    Let me summary what i have done in the last few days to try to fix the issue taht the new ipad does not appear on itunes 10.6 so that you guys can have an overview to help me :
    - removed previous itunes together with Apple Mobile Device and Bonjours
    - Reinstall latest version Itunes
    - restart computer (for sure the problem not from laptop becasue my other new ipad and iphone4 stil work well with itunes)
    - tried using recovery mode when the iPad is connected with computer and iTunes open; Keep the Powerbutton and the Homebutton pressed at the same time until see the Apple logo on  iPad screen.Then wait for about 10 minutes (i repeat this step many times). Ipad is turned on but  still not connect to itunes or no notice board appeared on itunes to start restore
    - I changed the usb cable/port...nothing change
    status of device is:
    - battery is fully charged
    - My laptop (window 7)
    - All what i can get is the ipad is charged when i plug in laptop.
    - no apple device is recognized on "my computer" window
    - no images tab is pop up as usual to copy photo
    Apple experts ...help me...pls...

Maybe you are looking for