New custom column in a query

Hi experts,
I am doing a query and I need to do something that I am not sure if it can be done. I have one characteristic (0COUNTRY) in the query and one variable to filter by Sales Organization. What I need to do is to have a new column in the query that will show Local market in case 0COUNTRY is the same as the Sales Organization country attribute, and Export market when it is different. Does anybody know if this can be done in BeX analyzer?
Any hint would be appreciated.
Thanks and regards,

Hi,
U can achieve this by using virtual characterstics.Add another characterstics in the cube with length 20 char (Say ZTEXT).
Code in the exit RSR00002 with program ZXRSRU02 for virtual characterstics.
Here u can put the logic as follows:
Read value 0COUNTRY compare the value with SALESORG 0country attrtibute value from master data table.
if same ZTEXT = 'Local market
else.
ZTEXT = 'Export market
There will be some performance issue but if the requirement like this u can try with this.
Thanks,
Debasish

Similar Messages

Create custom column in power query

Hello All,
I have a requirement to create report for the Analysis, my raw data looks like below which I'm extracting from multiple tables. I would like to extract project wise number count based on status, my idea is to create custom columns to write the value
if the value matches to the condition else blank. Example my status has multiple status value ( closed, on-hold,warranty,inprogress,etc) i need to know what formula will help me extract data in different columns so that i can get the count in pivot for each
status)
NUMBER         CATEGORY                                Internal SLA
    EXTERNALSLA      DATE_ENTERED   STATUS
C1000001   HEINEKEN                                    t
           t                  9/13/2014      CLOSED
C1000002   Migration-BLACKROCK AppV
2/11/2015   Terminated
C1000004   Migration-BLACKROCK AppV
10/24/2014   CLOSED
C1000005   Migration-BLACKROCK AppV        t                      t
1/12/2015   On-Hold
C1000006   Migration-BLACKROCK AppV
   11/5/2014   CLOSED
C1000007   Migration-BLACKROCK AppV   t
t               9/12/2014   CLOSED
C1000008   Migration-BLACKROCK AppV
8/6/2014   On-Hold
C1000009   BLACKROCK
8/5/2014   In Progress
C1000010   Migration-BLACKROCK AppV   t                    t
8/5/2014   On-Hold
C1000011   Migration-BLACKROCK AppV
10/25/2014   CLOSED
C1000012   BLACKROCK
9/24/2014   CLOSED
C1000013   BLACKROCK
10/16/2014   Terminated
C1000015   BLACKROCK
9/1/2014   In Progress

Hi Imke,
I have achieved what i wanted to... I did try the way you have suggested. But end result was not fruitful.
I did following for status wise count.
Step1: In power query I have created duplicate status column for each status available.( Example I have status {closed,open,initial... etc} I have created duplicate column for each status and replaced with null.For closed Except closed all i replaced in
column with null).
Step2: So every time my power query data refreshes it does that step each time so that i can get the count of each status column wise in my pivot table.
I have attached the result,
Harsha

Adding new customized column in the Bex Report

Hi Experts,
I have an existing column (say A ) in Bex and I want to add one more column (say B) based on the values that I have in column A.
For e.g.,
A          B
5          5   (=A1)
8          3   (=A2 - A1)
15        7   (=A3 - A2)
I am able to create a new column B and bring the values based on above formula to get the expected results. Though the results are correct and also I saved the report as workbook, when I try to refresh the query again and open the workbook, the new column 'B' is getting disappeared.
Could someone please help me on this?
Thanks in advance for your help.
Bregards,
Krish

Hi Pavel
I'm hitch-hiking on this thread.
Can you please explain what do you mean by "the grid becomes static" when you use "Convert to Formula"?
I'm studying Excel integration in the BEx Analyser and it seems to me that when you select Convert to Formula and save the query, then you load new records into the Cube, when you open the query again it's no longer refreshed (even if you select "Refresh Workbook on Open". Is it what you mean?
I'd appreciate more detailed explanation. I'd appreciate too this documentation about BExGetData.
Thanks
César Menezes

Custom column in Crosstab query in BO 6.5

Hello Gurus,
I am trying to create a report in BO 6.5 using data from two flat files by linking them and I applied cross-tab template as I need row data as columns based on a field called STATUS (Approved, Cancelled, In process etc). And in this STATUS field I want to add another column (Not Ordered) on the run using some conditions which is not in the flatfile. How can I do that?
Please let me know if my post in unclear so that I can provide more data regarding the report.
Thanks in advance for your time.

Let me elaborate my requirement. I am trying to create a report using data from two flat files. I am supposed to give the status of orders. So I created crosstab query and I chose STATUS field data to be as columns. Currently it have three fields----Approved, In process, Waiting for approval. Now as per requirement I am supposed to include another column called Not applicable based on two fields Amount and Local/No local. Before this we used to create the same report uising excel and I used below formula:
=IF(AND(Amount=0,B2="Non-Local"),"Not Applicable","Approved")
But in BO if the above condition is False I want that particular record to fall under already existing "Approved" but it is creating another "Approved" status and it is not catagorizing Not applicable....I mean every record with amount =0 falls under new Approved status but not in Not applicable as expected. Hope you understand my issue.
Am i doing anything wrong in creating formula?

Showing BPM attributes in UWL custom columns.

Hi All,
Need help in a query, we have to show BPM attributes in SAP Portal UWL custom columns. We could get information on adding new Custom column in UWL iView but did not find any documentation on how to map the BPM attributes to the UWL custom column.
Versions Consumer SAP Portal : 7.3 SP 9
Producer BPM Portal : 7.31 SP 8
Will be of great help if someone can give us a solution.
Regards,
Sai Sharan Kalla

if i am not wrong, it is not possible with uwl.
you can do it with bpm inbox.

Custom columns in task list

Hello,
I'd like to ask your help with a problem concerning the task list page.
For each task I have some additional data stored in a remote database, I use the "task number" for the join. What I'd like to do is:
- show these extra values in the task list in new, custom columns
- give the user the ability to filter and sort by the new columns
Could you give me some ideas to get me started? Should I dig deep into the "TaskList" servlet and somehow extend the column set and add the values to the tasks using JDBC? Is this goal achievable at all??
Any help will be much appreciated,
Denes Toth

Hello again bnainani,
I tried to define a flex field mapping and display it in the task list. Creating the mapping went fine, but I couldn't select the new column ("label") when creating a custom view to display the flex field data.
The Developer's Guide sais "A mapped payload attribute can also be displayed as a column in a custom view, and used as a filter condition in both custom views and workflow rules.". But how van I achieve this? The flex field label is not displayed in the available columns dropdown when selecting the columns of the view.
What am I missing?
Once again, thanks for any help in advance...

New customized report using PLD or QUERY PRINT LAYOUT to show customers onl

I am working with a Software Developing firm as an SAP Consultant.
Please tell me how to create a new customized report displaying various details as required by the client in the report using PLD or Query Print Layout.
Please help me asap.

Hi,
You can create queries using the Query Generator or the Query Wizard tools.
After you have created your own queries, you can link them to a required print layout.
for user reports.Look at:
Tools --> Queries --> Query Print Layout
Set there your query reports.
Printing User-Defined Queries
After you had linked a user-defined query to a user report template, you can now print it
according to its linked print layout.
There are two ways for printing your user-defined queries.
1. Using the Query Print Layout window:
Select from the upper menu Tools 􀃆 Queries 􀃆 Query Print Layout.
Click the Reports tab page.
Click to highlight the required query you would like to print.
Click on the printer icon or select from the upper menu File 􀃆 Print.
The user-defined query is printed according to its linked print layout.
2. Using the Queries Manager window:
Click the Queries Manager icon on the upper tool bar.
Click to highlight the required query you would like to print.
Click on the printer icon or select from the upper menu File 􀃆 Print.
The user-defined query is printed according to its linked print layout.
Note! You can also print preview user-defined queries. Do so by selecting the Print
Preview option as described in the methods above for printing your query.
Btw, you could search the manual training files relate to query PLD in http://www.service.sap.com/smb
Rgds,

Custom Column Name in Webpart file and Itemstyle for Content Query WebPart

I was trying to incorporate a custom column in the content Query WebPart.
The name of the column displayed in the list is "Risk Score"; a calculated column.
I right clicked on the field in the list settings and copy hte short cut which is pasted below:
http://<mainURL>/_layouts/FldEdit.aspx?List=%7BFE4CC761%2DE9B8%2D487C%2D8B92%2D1E42539144C4%7D&Field=Risk%5Fx0020%5FScore
Could you please let me know what can i type in the WebPart file exported and then to be imported in the section:
<property name="CommonViewFields" type="string"></property>
Also, please let me know what should i enter in the itemstyle.xsl in the section
<td style="width:30%; font-size:10px;font-family:Verdana;color:#007EB6; border-style:solid; border-width:medium;border-color:#E1E1E1;">
<xsl:value-of select="@Risk%5Fx0020%5FScore" />
</td>
Tnx

Ok.
Use like this
<property name="CommonViewFields" type="string">RiskStrore,Lookup</property>
and include like this in the itemstyle
<td >Risk store
<xsl:value-of select="@RiskStore" />
</td>

Query to get the new customer or updated customer in last 3 days in AR

hi Consultants,
we have a custom customer summary table whcih maintain the all customer details with balance and aging bucket information.
we have program to update this custom table daily base based on the day transation. now we need to find the query to find new customer or updated customer in last 3 days.
then we need to update the customer to custom table .
Please advice me
Thanks in advance
Anu.

Hi Vikram ,
Thanks for your reply.
Actually we have culoms in my custom table needs to update based on AR CUSTOMER
below culomn needs to update in my custom table .
CUSTOMER_ID
ADDRESS_ID
CUSTOMER_NUMBER
CUSTOMER_NAME
ADDRESS1
ADDRESS2
CITY
STATE
COUNTRY
PHONE_NUMBER
FAX_NUMBER
POSTAL_CODE
CONTACT_NAME
COLLECTOR_CODE
PAYMENT_TERMS
CREDIT_LIMIT
EXPIRATION_DATE
DB_RATING
DB_RISK_CLASS
DUNNING_LETTER_STAGE
LOCKBOX
ACCOUNT_OPENED
SALES_REP
LAST_COLL_CALL_COMMENT
FUTURE_ACTION_DATE
ORG_ID
LOCATION_NUMBER
HIGH_CREDIT_LIMIT_LAST_YEAR
HIGH_CREDIT_LIMIT_YTDPlease advice me how can we find the customer who update the above customer information in last 3 days.
Thanks,
Anu.

Content Search Query Builder - filtering for custom column value

I want to use a CSWP to display certain pages in a slideshow format on a site. However, to filter them in a preferred manner, the pages library has a custom column "Spotlight" which is a Boolean type (e.g. yes/no).
In my "Build Your Query" configuration page, I have added a keyword filter "SpotlightOWSBOOL=Yes" as the criteria to display my results. This is not working, despite the fact that I currently have pages flagged as "Spotlight"
in this library.
My question is - how can I achieve this result of displaying only pages with a custom column value "Spotlight" as "Yes"?

Hi Owen,
Could you capture a screenshot about your Crawled Property for your list column "Spotlight"? Is it name "SpotlightOWSBOOL"?
If your library column name is "Spotlight", you can create a custom
Manged Property (e.g. create name as SpotlightMangedProperty)to map the
Crawled Propery (e.g. may ows_spotlight, or ows_SpotlightOWSBOOL?) genegrated by list column "Spotlight", then start a full crawl.
Then you can add the keyword filter like below in "Build Your Query" dialog of CSWP web part, then check if the correct items are filtered.
SpotlightMangedProperty:"yes"
If the above value "yes" doesn't work, please also try
SpotlightMangedProperty:"True", or try SpotlightMangedProperty:1
More information about this topic you can read is below.
https://technet.microsoft.com/en-us/library/jj219667.aspx#proc2
https://msdn.microsoft.com/en-us/library/office/ee558911.aspx#kql_property_restriction_queries
Thanks
Daniel Yang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Import From Folder: How to Extract the File Name in a Custom Column.

Hello All
Here´s what we´re trying to do:
We have a folder with csv files named like this:
Sales_2013-02-05.csv
Sales_2013-02-04.csv
Sales_2013-02-03.csv
Sales_2013-02-02.csv
Sales_2013-02-01.csv
And in the csv files there are the sales columns but not the date column.
So we want to extract the date from the file name.
I´ve tried entering = Source[Name] in a custom column, but it adds a "LIST" link, and on a click on expand, it adds ALL file names from the folder in each row, instead of just the needed one.
If we could get the proper file name in each row (from where they got extracted), we could split the column and get the date from there. But I don´t know how put the filename there properly.
Can you help?

This isn't entirely straightforward, but it's definitely possible. What you need to do is to apply all of your transforms to each individual file instead of the combined files. I do that as follows:
1) Use Folder.Files as generated by the GUI to look at the list of my files.
2) Pick one file and do all the transformations to it that I want to apply to all of the files. Sometimes, this just amounts to letting the autodetection figure out the column names and types.
3) Go into the advanced editor and edit my code so that the transformations from step 2 are applied to all files. This involves creating a new function and then applying that function to the content in each row.
4) Expand the tables created in step 3.
As an example, I have some files with names that match the ones you suggested. After steps 1 + 2, my query looks like the following:
let
    Source = Folder.Files("d:\testdata\files"),
    #"d:\testdata\files\_Sales_2013-02-01 csv" = Source{[#"Folder Path"="d:\testdata\files\",Name="Sales_2013-02-01.csv"]}[Content],
    #"Imported CSV" = Csv.Document(#"d:\testdata\files\_Sales_2013-02-01 csv",null,",",null,1252),
    #"First Row as Header" = Table.PromoteHeaders(#"Imported CSV"),
    #"Changed Type" = Table.TransformColumnTypes(#"First Row as Header",{{"One", Int64.Type}, {"Two", type text}, {"Three", type text}})
in
    #"Changed Type"
For step 3, I need to take steps 3-5 of my query and convert them into a function. As a check, I can apply that function to the same file that I chose in step 2. The result looks like this:
let
    Source = Folder.Files("d:\testdata\files"),
    Loader = (file) =>
        let
            #"Imported CSV" = Csv.Document(file,null,",",null,1252),
            #"First Row as Header" = Table.PromoteHeaders(#"Imported CSV"),
            #"Changed Type" = Table.TransformColumnTypes(#"First Row as Header",{{"One", Int64.Type}, {"Two", type text}, {"Three", type text}})
        in
            #"Changed Type",
    #"d:\testdata\files\_Sales_2013-02-01 csv" = Source{[#"Folder Path"="d:\testdata\files\",Name="Sales_2013-02-01.csv"]}[Content],
    Loaded = Loader(#"d:\testdata\files\_Sales_2013-02-01 csv")
in
    Loaded
Now I apply the same function to all of the rows, transforming the existing "Content" column into a new value:
let
    Source = Folder.Files("d:\testdata\files"),
    Loader = (file) =>
        let
            #"Imported CSV" = Csv.Document(file,null,",",null,1252),
            #"First Row as Header" = Table.PromoteHeaders(#"Imported CSV"),
            #"Changed Type" = Table.TransformColumnTypes(#"First Row as Header",{{"One", Int64.Type}, {"Two", type text}, {"Three", type text}})
        in
            #"Changed Type",
    Transformed = Table.TransformColumns(Source, {"Content", Loader})
in
    Transformed
Finally, I need to expand out the columns in the table, which I can do by clicking on the expand icon next to the Content column header. The resulting query looks like this:
let
    Source = Folder.Files("d:\testdata\files"),
    Loader = (file) =>
        let
            #"Imported CSV" = Csv.Document(file,null,",",null,1252),
            #"First Row as Header" = Table.PromoteHeaders(#"Imported CSV"),
            #"Changed Type" = Table.TransformColumnTypes(#"First Row as Header",{{"One", Int64.Type}, {"Two", type text}, {"Three", type text}})
        in
            #"Changed Type",
    Transformed = Table.TransformColumns(Source, {"Content", Loader}),
    #"Expand Content" = Table.ExpandTableColumn(Transformed, "Content", {"One", "Two", "Three"}, {"Content.One", "Content.Two", "Content.Three"})
in
    #"Expand Content"
From here, you should be able to get to what you want.

How can i load data from access database to datagridview with custom columns all days of a month ?

Hi guys
I am newbie in vb net and I want your help to solve a problem.
I have this datagridview with two columns and all days of a month in custom columns.
[IMG]http://i59.tinypic.com/2qwpj15.png[/IMG]
I also have one combobox to change Year and a combobox to change Month.
Here is the code to load data
Private Sub fill_plan()
dgMonth.Rows.Clear()
Try
Dim i As Integer = 0
Dim query As String = "SELECT MonID,Unitname,Personel,Udate FROM tblMonth ORDER BY Unitname"
con.Open()
cmd = New OleDbCommand(query, con)
myDR = cmd.ExecuteReader
If myDR.HasRows Then
While myDR.Read
dgMonth.Rows.Add()
dgMonth.Rows(i).Cells(0).Value = myDR.GetInt32(myDR.GetOrdinal("MonID"))
dgMonth.Rows(i).Cells(1).Value = myDR.GetString(myDR.GetOrdinal("Unitname"))
dgMonth.Rows(i).Cells(2).Value = myDR.GetInt32(myDR.GetOrdinal("Personel"))
i = i + 1
End While
End If
myDR.Close() : con.Close()
Catch ex As Exception
MsgBox(ex.Message, MsgBoxStyle.Critical, "Error")
End Try
End Sub
With
this code the
personel column
loads the first
day of the month.
I want to load
the column the date that is
in the database.

Hello,
This can be done with less code
Private Sub fill_plan()
dgMonth.DataSource = Nothing
Dim dt As New DataTable
Try
Dim query As String = "SELECT MonID,Unitname,Personel,Udate FROM tblMonth ORDER BY Unitname"
con.Open()
cmd = New OleDbCommand(query, con)
dt.Load(cmd.ExecuteReader)
dgMonth.DataSource = dt
Catch ex As Exception
MsgBox(ex.Message, MsgBoxStyle.Critical, "Error")
End Try
End Sub
The above loads all rows, if you want to limit the rows placed in the DataGridView this is best done in the SQL via WHERE conditions and/or with SELECT TOP x.
Formatting of the data is best done via the property window for the DataGridView on whatever column you want too. Using the above you now need to set the data property for each column and set dgMonth.AutoGenerateColumns = False, in the end we end up with
less code
edit is there a reason for returning the primary key? If so then using my method we can hide that field but I see no reason for having it in this case
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem.

Implementing BADI MD_ADD_COL_EZPS for MD04 custom column

Hi there,
I'm using BADI MD_ADD_COL_EZPS to display 3 new buttons and three new columns in MD04.
For each line item that is displayed, the custom column is filled, after the button is hit -This works fine.
My Question is:
Is there any way to limit the value that is filled into the new column so that it only appears on the FIRST line item/row?
(At the moment it is repeated all the way down the page - the new value is a material characteristic, so doesn't change, will always be the same for each line)
I've looked at all the available structures/tables in the FILL_ADD_COLUMNS method of the BADI, and none seem suitable
to determine the "first" row. (ie. something like the way SY-TABIX or SY-INDEX might be used)
Any help appreciated.
Thanks,
David.

Hi Shubhendu,
in the method 'ACTIVATE_ADD_COLUMNS', you can set the flag EZ1_MODE to '1' to make the first column visible always. (it's been a while, but I think setting it to '2' makes it visible when the button is pressed.)
Same applies to EZ2_MODE for second column, EZ3_MODE for third.
look at the flags/parameters in this method, and also in FILL_ADD_COLUMNS, to fill the data.
here you need to fill structure EMDEZX_USEX1 (for column 1) etc.
The code is hit for each record displayed in MD04
Hopefully this helps you.
Regards,
David

How do I completely enable a new custom asset in Correspondence Management?

Hello!
I'm trying to add a new custom asset to the Correspondence Management Solution Accelerator, and have it behave like all other assets in the system (ie searchable, updateable etc). I'm almost there, but there's obviously something I'm missing, and I was hoping someone here might have done this before, or have a link to some documentation regarding the matter that I may have missed. The asset I'm trying finish creating is for a LiveCycle user in a specific domain. This is what I've done so far...
I've created the asset definition MyUser.fml and placed it in the FSIApp\Portal\webapp\WEB-INF\assetDefinitions folder. I've then registered this fml file in the spring-config.xml file in both the 'lc.cm.assetDefinitionsDeployer' and 'lc.cm.assetTypeRegistryBootstrapper' beans. In the 'lc.cm.assetTypeRegistryBootstrapper' bean, I set the key to 'MyUser', and the value to the class path of my Java class that represents this asset.
On the Java side I've created the MyUser.java class, as well as MyUserService.java and MyUserServiceImpl.java to allow the searching, updating etc of the MyUser assets.
After running the Bootstrap process, I can log into the Manage Templates application, select Data Dictionaries from the 'View' dropdown, and view/edit the MyUser data dictionary properties with no problems. So I'm happy that the asset has successfully been registered with the application.
Where I'm stuck is choosing the MyUser asset from the drop down, and searching the system for assets of that type. I can choose the MyUser asset type from the 'view' drop down, but the search result returns an empty array.
From digging into the existing Manage Templates code, I've created the following classes:
public interface IMyUserService extends IEventDispatcher - containing the following function definitions:
          function getMyUser(id:String):IAsyncToken;
          function getAllMyUsers(param1:Query=null):IAsyncToken;
public class MyUserSeviceProvider extends ServiceProvider - containing a getter/setter for MyUserServiceDelegate
public class MyUserServiceDelegate extends ServiceDelegate implements IMyUserService - containing the functions defined in IMyUserService, as well as creating the RemoteObject to perform the actions.
The MyUserServiceDelegate constructor is:
     public function MyUserServiceDelegate ()
            super();
            _service = new RemoteObject("myapplication.services.myUserService");
            _service.showBusyCursor = true;
This is the code for the function in getAllMyUsers in MyUserServiceDelegate:
     public function getAllMyUsers(param1:Query = null):IAsyncToken
            var operationToken:AsyncToken = this._service.getAllMyUsers(param1);
            var token:IccToken = new IccToken(this.className + ".getAllMyUsers");
            operationToken.addResponder(getDefaultResponder(token));
            return token;
I've also made changes to the following config files to register the RemoteObject destination specified in the MyUserServiceDelegate constructor:
spring-http-config.xml:
     <bean name="/service/UserService" class="org.springframework.remoting.httpinvoker.HttpInvokerServiceExporter">
        <property name="service" ref="myapplication.services.myUserService" />
        <property name="serviceInterface" value="com.mydomain.lc.services.MyUserService" />
    </bean>
remoting-config.xml:
     <destination id="myapplication.services.myUserService"/>
flexmessagebroker-servlet.xml
     <flex:remoting-destination ref="myapplication.services.myUserService" />
Above my Java class definition of MyUserServiceImpl.java I have the following line:
@Service("myapplication.services.myUserService")
So......
My problem is that when I choose the MyUser asset from the drop down, no search results are returned (an empty array is returned). I have logging code in the getAllMyUsers function in the MyUserServiceDelegateclass.as, as well as logging in the MyUserServiceImpl.java class (not shown in the above code snippets) and neither of them fire when selecting the MyUser asset from the drop down. So neither of the classes are being called on the search. If I force a search via the following line:
MyUserSeviceProvider.getMyUserService().getAllMyUsers();
the logging in both the Flex and Java classes works (and the java class returns the results as expected). So I'm happy that these functions, as well as the linking between the Flex and the Java side is working correctly.
The step that I can't seem to work out is having the selection of the asset in the drop down call the desired function automagically. I've been digging into the SearchManager, the ServiceLocator and heaps of other classes, but I'm falling deeper and deeper into the rabbit hole...
Can anyone shed some light on what they think might be needed to make the final link here? I've been digging and digging into the code for days now and my brain hurts!!
Any advice appreciated!!
Thanks,
Kristian

Hi Saket,
By 'not really complete' I'm assuming (hoping) that some work has been done on this already. Our project requires the use of custom assets, so it's very important that we get this functionality running as soon as possible.
Any help, unsupported or otherwise, would be great. Feel free to email me any details if you'd prefer not to post anything public on the boards.
Cheers,
Kristian

Fbl5n report showing pritn output for a new customer on a new page

Hello All,
In fbl5n when i execute for all the customers and give print command its printing every new customer on a new page but i want to print the data continously.
Pls let me knw how to avoid this?
Sunny

Hi Sunny,
you're case is quite common, because SAP displays the customer data in a standard layout, putting a page break after every customer and company code.
In order to avoid this, you may change the grouping criteria. For that,
1. be sure that you have not clicked on the header of any column in the list
2. click on button "sort ascending"
3. here you'll see that fields "company code" and "account" have an asterisk on column NG (new group). This means that, for every change in these fields, SAP will insert a page break
4. remove these asterisks
5. (optional) save this layout for further launchings of the report
I hope this helps. Best regards,
Alvaro

New custom column in a query

Similar Messages

Maybe you are looking for