SRM 7.0 New custom fields added to view do not appear in the component conf

Hi
I added two custom fields to the view V_QTE_DOFC_I_DESC of the WD componenet /SAPSRM/WDC_DODC_QTE_I_DS. This view gets called when bidder is trying to create a bid and clicks on add Substitute Item in the Item tab. This view is simply a popup window where we can enter ther substitute item.
I added two custom fields to the context of the above view and placed on the layout of the view as input fields. Then I tried to modify the component configuration /SAPSRM/WDCC_DODC_QTE_I_DS_SUB. When I look in t he web dynrpo built-in for the view V_QTE_DOFC_I_DESC, I don't see the custom fields that I just added. As a result, these custom fields are not displayed when I try to substitute an item. Could anyone tell me how to brining in these two custom fields into the component configuration.
Any help is greatly appreciated.

Hi Prasuna,
Sorry ..You are right..I was looking at some other WDC related to contract data..It you map the CUFs to /SAPSRM/S_CLL_CTR_ITEM which has the include structure INCL_EEW_PD_ITEM_CSF_CTR then it should work fine.
If you do this, are you able to view the new fields on the screen?
you mentioned that you are not able to save the data to the table.
Include your fields in INCL_EEW_PD_ITEM_CSF as well because if you add CUF to any of those doc types, you also have to add those CUF to the global structure for CUF documents.
Also Check if you fields are there in structures BBPS_CTR_CUF_ITEM,BBPS_CTR_UI_ITEM and BBPS_CTR_ITEM.
Check whether you have implemented the BADI's like BBP_DOC_CHECK_BADI ,BBP_DOC_CHANGE_BADI and BBP_DOC_SAVE_BADI . check out the structures (whether they having the CUFS) used in those if you have implemented any of them .
Regards
Lavanya
Edited by: LAVANYA CHAVA on Aug 25, 2010 10:10 AM

Similar Messages

  • The new Sony DSC-RX10 Lens Profile does not appear in the Enable Lens Profile Develop Module.

    The new Sony DSC-RX10 Lens Profile does not appear in the Enable Lens Profile Develop Module.
    The wrong lens F3.5/6.3  profile is checkmarked and I can not find the new  RX10  Sony 70-200 F2.8 G SMM11 profile.  The meta data in the Library module correctly list the Sony RX10 and the Correct lens. 
    How may I select the correct lens profile for my Sony DSC-RX10?

    Ask in the PS/ LR/ ACR forums
    Mylenium

  • Custom field added by AET  is not editable

    Hi All,
    I have created 2 fields in for ERPADMINI BOL node. but these fields are not editable. The attribute properties are coming as Read only at runtime.
    How to make these fields editable ?
    I have searched in forums but couldn't find any solution, please help.
    Thanks
    Krishna

    Hi Bhushan,
    The code was there already for some of the fields.. same way i added for my field, but no luck ..
    Below is the code. Last field 'ZZPRDCT_SPECIFI' is my field.
    IF iv_object_id EQ 'ITEM'.
         CLEAR ls_supply.
         ls_supply-field = 'ZZDEAL_CODE'.
         ls_supply-check = 'N'.
         APPEND ls_supply TO ct_supply.
         CLEAR ls_supply.
         ls_supply-field = 'ZZRANDOM_LENGTH'.
         ls_supply-check = 'N'.
         APPEND ls_supply TO ct_supply.
         CLEAR ls_supply.
         ls_supply-field = 'ZZERROR_CODE'.
         ls_supply-check = 'N'.
         APPEND ls_supply TO ct_supply.
    CLEAR ls_supply.
         ls_supply-field = 'ZZDSCAL'.
         ls_supply-check = 'N'.
         APPEND ls_supply TO ct_supply.
    *-> José Sabino - 15.01.2013 - End
    *-> exrodrg - 06.05.2014 - Begin
        CLEAR ls_supply.
         ls_supply-field = 'ZZPRDCT_SPECIFI'.
         ls_supply-check = 'N'.
         APPEND ls_supply TO ct_supply.
    ENDIF.

  • Field added to cobl does not appear in FB01 interface

    Hi!
    I have added OXK3 transaction and set this field as "Opt Entry", but the field does not appear in FB01 transaction.
    I've also tried "Req Entry" status for new field it gave no effect.
    How this field can be enabled in the interface of standard FI transactions?
    Thanks!

    Some questions
    -Did you solve your problem ?
    -Did you come through OSS <a href="https://service.sap.com/sap/support/notes/174413">Note 174413 - Customer-specific fields in new Enjoy transactions</a> ?
    Regards

  • Custom field added by AET is not editable - not added to BOL structure

    Hi ,
    We had created a new field using AET in Products Assignment Block of Campaigns as a line item.This is a drop down field.
    But in WEB UI,this field is being displayed as non-editable dropdown.
    In AET, we opted Business Object as MKT_CPG and subobject as PRD.
    But the issue is that the Dependent objects CPGProducts and CPTProducts BOL Entity Structures are not getting enhanced with this new field and i guess , so the field is appearing as non-editable in WEB UI.
    PRODUCTS context node is using the structure CRMS_MKTPL_IB_CPG_PROD(BOL object CPGProducts).
    All other related object structures(Structure of that of Dependent Objects AGRProduct ,DLMProduct etc) are being appended with the newly created field.
    Component : CPGOE_ABLOCKS
    View : CPGOE_ABLOCKS/OVELProducts
    Context Node : PRODUCTS
    Attribute structure that needs to be enhanced for our requirement : CRMS_MKTPL_IB_CPG_PROD.
    We are not using Genil Shared memory in our dev system.
    Any pointers to solving this problem is highly appreciated.
    Thanks
    Swapna.

    Hi Sherwin,
    Please follow the corrections in note : 1472567
    I only raised an OSS message back in July 2010 with SAP when I had similar requirement.
    Regards,
    Naresh

  • My i-Pad2 won't charge after I downloaded some new stuff from i-Tunes.  A note appears on the screen "Charging is not supported with this accessory".  I have tried charging through two computers and with the wall socket plug (with another cable).  I have

    My i-Pad won't charge after I downloaded some stuff from i-Tunes.  I have tried charging through two computers and using the wall socket,, with different cables.  I have turned the i-Pad off & on a couple of times but it still won't charge.  Any ideas will be gratefully received.

    The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • New custom field in lead conversion

    Hi..
    Can we capture new custom field in account object while converting it using the lead conversion layout. TIA
    Edited by: user13260779 on Aug 22, 2011 11:33 PM

    Your requirement is not clear; can you please elaborate?

  • New Customer Field in Shopping Cart (SRM) with default value

    We have requirement to add new Customer field in Shopping cart (SRM 4.0) and assign a default value to it.
    We have added the custom field and also assigned default value 'X' to it using BADI BBP_CUF_BADI_2 method MODIFY_OUTPUT. Problem we are facing is in case user changes the value and unchecks the custom field then it gets overwritten by default value once the shopping cart is saved. We have followed steps mentioned in link below in order to add custom field and populate it.
    /people/nanda.kondagunta/blog/2006/10/23/how-to-create-custom-fields-in-srm
    KR Jaideep,

    Dear Poster
    Your thread has had no response since it's creation over
    2 weeks ago, therefore, I recommend that you either:
    - Rephrase the question.
    - Provide additional Information to prompt a response.
    - Close the thread if the answer is already known.
    Thank you for your compliance in this regard.
    Jason Boggans
    SAP SRM SDN Moderator

  • Addign new customer field in Shopping cart SRM with default value

    We have requirement to add new Customer field in Shopping cart (SRM 4.0) and assign a default value to it.
    We have added the custom field and also assigned default value  'X' to it using BADI  BBP_CUF_BADI_2 method MODIFY_OUTPUT. Problem we are facing is in case user changes the value and unchecks the custom field then it gets overwritten by default value once the shopping cart is saved. We have followed steps mentioned in link below in order to add custom field and populate it.
    [/people/nanda.kondagunta/blog/2006/10/23/how-to-create-custom-fields-in-srm|/people/nanda.kondagunta/blog/2006/10/23/how-to-create-custom-fields-in-srm]
    KR Jaideep,

    Hi,
    In badi BBP_CUF_BADI_2, method MODIFY_OUTPUT,
    are you doing something like this?
    CASE IV_FIELDNAME.
      WHEN 'YOUR_CUSTOM_FIELD'.
        IF IV_VALUE IS INITIAL.
          MOVE 'YOUR_DEFAULT_VALUE' TO EV_VALUE.
        ENDIF.
    ENDCASE.
    Best regards.
    Edited by: Pablo Casamayor on Jul 23, 2009 12:32 PM

  • Custom field added in Module pool is not reflecting in SRM Shopping cart

    Hi all,
    I have to add a custom field for Plant in the Ship-To address subscreen(BBPSC01) in Shooping cart in SRM.
    I have added the field in the program "saplbbp_sc_ui_its" in screen 310.
    But I think need to write the HTML code/Java script in HTML template to trigger the code from module pool.
    As I am new to this scenario, can anyone please let me know the procedure to follow.
    Thanks,
    Rakesh.

    Hello Anubhav,
    If your new customer fields are not displayed dynamically, re-generate Dynpro concerned using report BBP_DYNPROS_GENERATE.
    Regards.
    Lauurent.

  • Adding new custom fields in SAP transaction?

    Hi,
    System - ECC 6.0
    I need to add some new custom fields in Contract Object(PSOBWORK). Can any one tell me what are the ways I can do this, and what is the best way to add custom fields in SAP transaction?
    I highly appreciate your help on this.
    Thanks.
    Rajesh

    Hi,
    Find the link below  which has step by step process of adding custom fields:
    goto site saptechnical-tutorials-ExitsBADIs-EEWB
    Hope this would be helpfull.
    Regards,
    Sharath

  • Adding new custom fields in SAP transaction - PSOBWORK?

    Hi,
    System - ECC 6.0
    I need to add some new custom fields in Contract Object(PSOBWORK). Can any one tell me what are the ways I can do this, and what is the best way to add custom fields in SAP transaction?
    I highly appreciate your help on this.
    Thanks.
    Rajesh

    Hi ,
            There are options like screen-exits ,badis
    the best option would be to find screen exits for the transaction and you code ur logic in the exit and create the screen with your requirement .

  • Adding new custom fields in t code - MIR7

    Dear Experts ,
    I have the following requirement .
    In MIR7 t code under the tab - basic data - i have to add new custom fields like
    Billing document no and billing doc item along with multiple selection option .
    i have found the  BADI - BADI_FDCB_SUBBAS04  . i dont know how to get the custom fields in that .
    Regards
    Prabhu

    I have designed a MODAL SCREEN which contains a table control for multiple entries for  Billing document nos .
    I want to design a PUSHBUTTON on the MIR7 screen and then once i will press the pushbutton the MODAL screen should get called from that .
    When the MODAL screen will be called in the back end the MIR7 screen should also be present in the
    back end .
    If any queries on understanding the requirement then please revert .
    If any body has any idea on this then please suggest .
    Regards
    Prabhu

  • New custom field in the POWL search criteria

    Hi experts,
    My requirement is to add a new custom field in the search criteria (Parameters)
    In my Easy shopping card POWL. I need to add custom fields in search criteria.
    I tried appending my custom fields in structure /SAPSRM/S_SEARCHFIELDS
    And customized the POWL type DB criteria SAPSRM_FEEDER_SC by adding the custom field
    But still the newly added search criteria is not displaying in the
    Query   SAPSRM_E_CHECKSTATUS_01 in powl_query transaction.
    Kindly help me to solve this issue
    Regards
    Chinnaiya P

    Hello Konstantin,
    thanks for the reply...
    I tried to add an extra Field(Company code) in POWL Search. the problem is the Field Company code doesnt get updated in BBP_PDHSC and BBP_PDISC with the value used in while creating SC.
    I only get the Company code value in table BBP_PDBEI for SC.
    So when i give any value in POWL search for company code no data is shown even though the SC was created in the inputted Company code.
    so how to go about adding CC as search criteria in POWL so that the resultant output is filtered on the basis of CC value.
    Thanks
    Rajat

  • Issue with new Custom field value in Material UI (EHP5)

    Hi
    We added new Custom field (country) in material UI for Routing the WF based on country.
    we added this new field in material general data, When user press the "check" button in the header the value disappeared in the UI.
    This field value  required only in MDG CR level, this field value will not be updated in ECC active area.
    Request your inputs to solve this problem.

    resolved myself:
    PROCESS BEFORE OUTPUT.
    *                      Verarbeitung vor der Ausgabe
    *MS17092009 Non eliminare modules standard.
      MODULE set_propriety.
      MODULE INIT_SUB.
      MODULE GET_DATEN_SUB.
    PROCESS AFTER INPUT.
    *                      Verarbeitung nach der Eingabe
    MODULE GET_DATEN_SUB.
    CHAIN.
          FIELD MARA-ZBARCODE.
    ENDCHAIN.
    MODULE SET_DATEN_SUB.
    FIELD MARA-ZBARCODE MODULE BARCODE_0001 ON INPUT.

Maybe you are looking for

  • How can i obtain a new password for my airport if i forgot the original

    trying to help my friend out..save her a trip to Apple store she needs a new password for her airport it keeps requesting one from her...and she forgets her original how can we set up a new one for her thanks in advance

  • IPhone 4s Not Recognized in iTunes 10.6.1 Running Mac 10.6.8

    I purchased 10.6.3 and since upgraded to 10.6.8. Now my iPhone 4s is not recognized in iTunes (10.6.1). I did all the suggested troubleshooting. I rebooted and unplugged - replugged everything and still nothing. My phone IS recognized in iPhoto thoug

  • Email addresses as IDs?

    I may be wrong, but I seem to notice an alarmingly increasing number of new participants who chose their email addresses as Adobe IDs. Apart from the carelessness, this is likely to produce problems in the topic lists of these forums, and I know I ha

  • How to delete Workarea in Designer 10g R2?

    I have created so many workareas. I have exported the application systems from a Workarea and I wish to delete the Workarea permanently. Does anyone know how the Workarea could be deleted?

  • Series from Waterfall analysis worksheet are not populated

    Hi all, Can anyone tell me besides configuring the Rolling data, setting the active_forecasts_versions and profile_forecasts_versions parameters. What other settings should one do for the system to populate the week4_forecast, week8_forecast, week13_