New Data Requirement!

I too am very upset. I have been a very loyal Verizon customer for over 15 years.
My wife does not like technology. She uses a cell for convenience. It's the only phone we have. To be told we have to have a data plan. Why don't they just say the phone cost so much a month with the data included. You think you're getting a good deal and then they throw in the data plan and it is then not at all a good deal.
I'm seriously thinking of just returning our new phones and telling Verizon see ya and get a pre paid plan from someone. Although what I am reading there isn't anyone with any better cusomer service. Everyone is just plain greedy. Pretty soon you can't even have a cell phone without a data plan. I have a computer for doing data. It's a laptop. I can connect anywhere there is wi-fi. I don't need no stinking data plan.
It's all moot anyway. You're stuck, you need a cell. BUT I DON"T HAVE TO GET A VERIZON CELL!!!!!

this is why it's very important to read what you sign. it states that smartphones require data plans and that you have 14 days to return it and get out of the contract. i'm hoping you are within that 14 day period. if so, just swap them out for basic phones that don't require the data plans. if not, sell them to pay the early termination fees and move to a cheaper service.

Similar Messages

Adding new data elements to Org Modeler.

We are trying to add 4 fields to the org Modeler. However it is nowhere to be found like in the orgchart.
Org Modeler 3.0 SP2
PA0001, PA0008, HRP1005 and HRP1008. (also linking to the texts in T001P, so we will require a table inner join)

Hi Wade,
In order to get the fields in OrgModeler scenarios you need to make sure that your hierarchy data element in the Source OrgChart contains all fields that you want. For this I recommend creating a NakisaRFC function for the additional data, creating a data element for it and then creating a linked data element to link together the new data element and the existing hierarchy data element. There is no data center in OrgModeler so you will need to do this manually.
Best regards,
Luke

Adding new data to a notification

Hi everyone,
I have a requirement to modify an approval notification and add some new data to it. On the internet I have found examples of how to embed an OA Framework region into a workflow notification. For example here - http://www.oraclearea51.com/oracle-technical-articles/64-oaf-beginners-guide/232-oaf-and-workflow-jrad-notification-oaf-region-embedded-in-notification.html.
The truth is, my knowledge of OA Framework is very sketchy but I hear there is a method to do this using PL/SQL. I think I will be more comfortable with that for now.
Is there a tutorial on the net to do this or can anyone point me to a way to achieving this in my workflow notification?
Many thanks

Hi,
You need to use a PL/SQL document if you don't want to use an OA framework region.
1 - define an item attribute of type document. Set this to PLSQL:<code to call>/<document ID>, or PLSQLCLOB:<code to call>/<document ID> depending on whether you are going to return up to 32k of text or more than that.
Typically, the document ID is set to <item type>:<item key> so that you can programatically split it into the type and key to link back to the Workflow process and retrieve any attributes that you want to using the standard APIs.
2 - Define the code, according to the standard signature for document APIs
procedure <procedure name> (document_id in varchar2,
display_type in varchar2,
document in out varchar2,
document_type in out varchar2)
or
procedure <procedure name> (document_id in varchar2,
display_type in varchar2,
document in out clob,
document_type in out varchar2)
3 - In your code, build the content that you want to, either as text or HTML depending on the display type that is passed in. Add that to the document variable that you are returning.
For more information, look in the Oracle Workflow Developer's Guide, Release 2.6.3.5 - Part Number B12161-02 which can be found here: http://download.oracle.com/docs/cd/B14099_19/integrate.1012/b12161/deffa04.htm
HTH,
Matt
WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
Have you read the blog at http://www.workflowfaq.com/blog ?
WorkflowFAQ support forum: http://forum.workflowfaq.com

Data reconciliation from 2 datatargets to a new data taget

Hello Gurus,
I have a requirement of reconciling data from 2 data targets to a new data target, any suggestions are appreciated.
The Scenario is as follows:
Cube1 is in key figure model
Cube 2 is accounting model
Each account in Cube2 corresponds to one key figure in Cube1.
Now the data needs to be reconciled, if there is any difference it needs to be written in to another cube, A mapping table is available which contains which key figure corresponds to which account.
Thanks in advance.
Ganesh

Hi Ganesh,
I think, you can do this with APD: Use the two cubes as sources in an Analysis Process. Place a routine behind cube1 in order to enrich the cube data with the mapping information (I assume you have a DB table containing the mapping information), i.e. add the fields for the accounts.
Then join cube2 with the result of the routine.
Would this make sense? I am not sure, maybe it would be better to start with cube2 instead of cube1.
Kind regards,
Thomas

Sharepoint 2013 RS - Adding a New "Data Source" or "Report Builder" in a Library

I've installed SQL Server Reporting Services SharePoint Integration Mode. I also enabled SQL Reporting in the Library setting. But, When I click to open a new "Data Source" or "Report Builder" an error occurs:
'New Document' requires a Microsoft
SharePoint Foundation-compatible application and web browser. To add a document to this document library, click the 'Upload Document' button.
SharePoint 2013 Enterprise
SQL Server 2012 SP1 + RS add-in + PowePivot add-inn
MS Office 2013 Professional Plus
Internet Explorer 10
I've also tried a hotfix pakage for office 2013 called: owssupp2013kb2726997fullfilex64glb
Sharepoint Stssync Handler add-in infromation in Internet Explorer:
Name: SharePoint Stssync Handler
Publisher: Microsoft Corporation
Type: ActiveX Control
Architecture: 32-bit and 64-bit
Version: 15.0.4517.1001
File date: ‎Tuesday, ‎May ‎21, ‎2013, ‏‎12:57 PM
Date last accessed: ‎Today, ‎December ‎16, ‎2013, ‏‎36 minutes ago
Class ID: {BDEADEF5-C265-11D0-BCED-00A0C90AB50F}
Use count: 6
Block count: 0
File: OWSSUPP.DLL
Folder: C:\Program Files\Microsoft Office\Office15

Hi,
i had the same problem. First we figured out, that the Report Builder was working in the Root Site Collection of a Web Application but not in any other Site Collection of the WebApplication.
After that we took a look how the Report Builder is started. The Content Type got a Click Once Application as Template, but you can't open the URL in the Browser neither the referenced file can be found in the Feature folder on the SharePoint Server. Turns
out SharePoint does some crazy http redirection and that this doesn't work on Site Collections which are not at the root. At least if you installed Reporting Services Add In Service Pack 1.
Fun Fact: If you start the Report Builder on the Root Site Collection you can create a Report which works on any Site Collection. Its just the launch if the Report Builder which is broken.
Our Solution was the SQL Server 2012 Service Pack 1 Cumulative Update 8 which fixed the Problem.
You can request a download here: http://support.microsoft.com/kb/2917531
Select the "2012_SP1_RSShrPnt_CU8_2917531_11_0_3401_x64" Fix and install it on every SharePoint Server in your Farm.

SP2013 RS - Adding a New "Data Source" or "Report Builder" in a Library

I've installed SQL Server Reporting Services SharePoint Integration Mode. I also enabled SQL Reporting in the Library setting. But, When I click to open a new "Data Source" or "Report Builder" an error occurs:
'New Document' requires a Microsoft
SharePoint Foundation-compatible application and web browser. To add a document to this document library, click the 'Upload Document' button.
SharePoint 2013 Enterprise
SQL Server 2012 SP1 + RS add-in + PowePivot add-inn
MS Office 2013 Professional Plus
Internet Explorer 10
I've also tried a hotfix pakage for office 2013 called: owssupp2013kb2726997fullfilex64glb
Sharepoint Stssync Handler add-in infromation in Internet Explorer:
Name: SharePoint Stssync Handler
Publisher: Microsoft Corporation
Type: ActiveX Control
Architecture: 32-bit and 64-bit
Version: 15.0.4517.1001
File date: ‎Tuesday, ‎May ‎21, ‎2013, ‏‎12:57 PM
Date last accessed: ‎Today, ‎December ‎16, ‎2013, ‏‎36 minutes ago
Class ID: {BDEADEF5-C265-11D0-BCED-00A0C90AB50F}
Use count: 6
Block count: 0
File: OWSSUPP.DLL
Folder: C:\Program Files\Microsoft Office\Office15

Hi Ali,
According to the current description, the issue may occur because SQL Server 2012 Reporting Services add-in feature for SharePoint 2013 isn’t installed correctly.
To resolve the issue, you need to reinstall add-in feature for SharePoint 2013.
References:
Install or Uninstall the Reporting Services Add-in for SharePoint
Document Library - Enable New Document, Edit Document Features
If the issue persists, please feel free to contact me.
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

I want to plot a waveform chart where I have a constant slope(defined by me) and new data is plotted over the chart with the defined slope already in the background.

I want my chart to have a constant slope already plotted before it continues to start plotting the real time data.. so that I can compare my new data point to point with the ideal slope that i already have in the background
Solved!
Go to Solution.

raza51 wrote:
Hi,
Thanks for help.. But this would work when i have one array and a constant "slope". What if I want to print 2 arrays of data.. means if there is an array of data instead of constant "slope"...
Since your graph is refreshed every time you go through the loop anyway, just set up the constant/reference array before the loop and feed it into the graph. That way you'll also have a full X-axis (and a Y-axis which at least includes all the reference data) for the graph already set up.
(That's twice in two days I've been scooped by a couple of minutes, I've got to get my typing speed up...)
Cameron
To err is human, but to really foul it up requires a computer.
The optimist believes we are in the best of all possible worlds - the pessimist fears this is true.
Profanity is the one language all programmers know best.
An expert is someone who has made all the possible mistakes.
To learn something about LabVIEW at no extra cost, work the online LabVIEW tutorial(s):
LabVIEW Unit 1 - Getting Started
Learn to Use LabVIEW with MyDAQ

Reg. the creation of new data type in ECC 6.0

Hi All,
I have a requirement wherein I need to create a new data type INT with length as 4. Is there any way that we can add create a new data type.
Thanks in advance,
Durga.

I have tried using t-code SE11 but i am unable to create.

Where the new data's are placed first ?

Hi,
I have created the database of TimesTen as per the steps in
http://download.oracle.com/otn_hosted_doc/timesten/1121/quickstart/html/admin/db_ops_createdb.html
using Data Source Name (DSN )
Placed data in C:\TimesTen\Database
Placed log in D:\TimesTen\Log
Command> connect "dsn=my_ttdb";
Connection successful: DSN=my_ttdb;UID=*******;DataStore=C:\TimesTen\Database\my_ttdb;DatabaseCharacterSet=AL32UTF8;ConnectionChar
=D:\TimesTen\Log;PermSize=700;TempSize=300;TypeMode=0;OracleNetServiceName=orcl_db;
(Default setting AutoCommit=1)
If the tables are created it will be data file that is in C:\TimesTen\Database path
If the data's are populated(inserted/updated) then the log will be in D:\TimesTen\Log path and data's will be C:\TimesTen\Database
Here what ever command which is issued will be logged in D:\TimesTen\Log
Where the new or incoming data's are placed , first in-memory or where ,if it is placing in memory when it will be writing to disk. I couldn't be able to see any data's in memory when the new data is inserted.
I am using bulk command to insert the data
ttBulkCp -i DSN=my_ttdb mytable C:\TimesTen\Database\test.txt
When the data's are inserted it writes the log in the log directory D:\TimesTen\Log and the new log files are generated my_ttdb.logXX ,then what is the difference in general Oracle database and Oracle TimesTen database?
If the logs are going to happen when we use the ttBulkCp command then we can opt for Oracle database and why we need to go for Oracle TimesTen if all the operations are similar.What differs here with normal Oracle database.
Thanks!

Hi,
In the link
http://docs.oracle.com/cd/E21901_01/doc/timesten.1122/e21633/comp.htm#BABHBICB
under Database persistence topic it is said as Databases are created in two ways :
Permanent databases are stored to disk automatically through a procedure called checkpointing. TimesTen automatically performs background checkpoints based on the settings of the connection attributes CkptFrequency and CkptLogVolume. TimesTen also checkpoints the database when the last application disconnects. Applications can also checkpoint a database directly to disk by invoking the ttCkptBlocking built-in procedures
Temporary databases are not stored to disk. A temporary database is automatically destroyed when no applications are connected to it; that is, when the last connection disconnects or when there is a system or application failure. TimesTen removes all disk-based files when the last application disconnects.
A temporary database cannot be backed up or replicated. Temporary databases are never fully checkpointed to disk*, although Checkpoint operations can have significant overhead for permanent databases, depending on database size and activity, but have very little impact for temporary databases. Checkpoints are still necessary to remove transaction log files.
If the Temporary databases are never fully checkpointed to disk then how cum the full data are written to disk
How to Setup a Permanent database
How to Setup a Temporary database (http://docs.oracle.com/cd/E21901_01/doc/timesten.1122/e21633/using.htm#BCGJAJDI)
But the statements are not clear
I need to check how it works on a Permanent database and Temporary database, so it would be helpful if you could provide alternate link how to configure Permanent/Temporary database.
My aim to keep the data in memory (i have not installed Oracle database,only TimesTen has been installed)and replicate the data to another server.For this requirement whether TT will a suitable.using Windows 2003 and 32 bit OS

New TDS requirement SAP note 1486147

Hello,
This is regarding the new TDS requirement for which SAP note 1486147 has to be implemented.
The problem is that we have implemented the note and also maintained entries in J_1I_SECCO_CIT as well as the entries in J_1IEWT_ACKN.
When we do the testing we are constantly getting one error " J1IN:016"
This error code is not defined in SE91.
If any one has handled such a scenario please let us know.
Regards

Hi,
Achnowledgement details comes in table it_qrtrtab at run time in the smartform, you can dibug the program j_1iewt_cert and smartforms J_1iewt_cert where at run time you will able to see data avaialability, If values are not available in this internal table then check related notes given by SAP, I have already implemented this note and also faced same issue but my FI consultant has given me the related note and my issue was resolved.
Please checkout related notes and data population in the dibugger.
Regards,
Umang Mehta

How to restrict "insert new data source" in Analysis, edition for Microsoft Office report

Hi Experts,
There is a requirement in my current project: when an end user access a Analysis, edition for Office Report from BI platform, they can view and refresh the report. But users should not be able to add new data source in that Analysis Report. As per my understanding, that means "insert data source" button should remain disable for the user.
I have check all available access levels from CMC, but cannot find any. It will be great if you let know correct access level in CMC for the same.
Any comments/recommendation will be appreciated.
I am using BOXI4.1 SP3 version with Microsoft Office 2013.
Thanks in advance.
Regards,
Animikh Chaudhury

The answer from our account manager is that there is only one license model for AO - which means every user is able to refresh, navigate, use planning functions and add source data (whith the standard license). Adding a DS is not really more then navigation because you can build a Query with all key figures and characteristics of a cube which gives you flexibility. That makes sense because there are no authority checks installed from SAP to avoid this (maybe this is different in combination with HANA and workspaces) .
Futhermore SAP has no possibility to measure how many users are doing which functions instead of recording every action of every user. But where should they do it? You could use it with BO or with Netweaver or in mixed Environments. The BO license check is done on BO platform and there you have no possibility to create new users which you need for connection (I'm not sure how this is monitored in a pure BW Environment without BO).
Furterhmore another possibility to add new data is using vba. You don't really need the buttons from the menu.

How to Define new Date rules

Hi ,
I have a requirement in my project, where in i have to create some new date rules. I've searched the whole web to find any document which explains the XML for Date rules but couldn't find any. Does any one know what that XML means, and how to create new Date rules ?
Please reply
Krishna-

Hi
it just calculates new dates base on reference dates or abap function modules.
In IMG in Date management node you can create your own date rules.
Best would be to copy existing one and than modify it.
Please read this thread about this: Date rules editor - file format documentation availability
Regards
Radek

Architectural Design - New Data Warehouse

Hello All,
This is my first post to the oracle discussion forums and I'm looking forward to the interactions with other ODWB users.
I am just begining to implement a design for a new data warehouse, our team has already defined user requirements for a subset of the business (Sales/Marketing) and have committted a logical model to paper. We have installed our dev environment and are now ready to begin the work of creating our prototype.
I've read all the Oracle doc I can get my hands on regarding implementing your DW objects and have been pondering the approach. ROLAP or MOLAP.....
it seems to make sense that we should deploy into a ROLAP environment bringing in all our data from our staging area to create a stable relational data store. Then select most used or queried dimensions and facts to deploy in a MOLAP environment... has anyone used this approach? any lessons learned? do you have to choose one method or the other? or can you take a blended approach ? would you deploy both in the same database instance or seperate the two?
thx

I'm somewhat new to OWB coming from an Informatica background but in our environment, we are doing the same thing. Our Enterprise Data Warehouse will be based on ROLAP and I intend to use MOLAP for subsets of the EDW.
Dimensions in Oracle are somewhat interesting in that they are "leveled" and you can tie cubes or "fact tables" to any level of the dimension. This is a bit un-Kimball-like and has taken some getting used to. I think it is a powerful feature but I will have to experiment some until I understand it better.
One critical bug with 10.2 I've run into is with dimension roles - The time dimension for instance. Typically this is one table that is aliased many many times. If you exceed roughly 5 roles for the time dimension, the generation of the object fails since OWB generates a single anonymous PL/SQL block that exceeds 64k. Its a documented bug in development with no workaround according to metalink.
Other gotchas are that table changes always try to generate "create table" scripts even if you only add an index or change parallelism. We have had to do table maintenance outside OWB and then keep the metadata in sync up until now.
I haven't done any of the MOLAP yet but from what I read there are some restrictions - such as you can't have roles on dimensions for MOLAP and I believe you can't have SCDs in MOLAP. I don't know how Time dimensions are handled in MOLAP without roles! Do people really generate tables for every single time dimension in OWB???
Hope you share your experiences here!
- Mike Taylor

How do I run a new Ipod on an older 500mhz 32 bit computer? New ipod requires v 10.6.3 or higher which also requires 64 bit or 1ghz speed.

How do I run a new Ipod on an older 500mhz 32 bit computer? New ipod requires v 10.6.3 or higher which also requires 64 bit or 1ghz speed.

http://ww2.cs.fsu.edu/~rosentha/linux/2.6.26.5/docs/DocBook/libata/ch07.html#excatATAbusErr wrote:
ATA bus error means that data corruption occurred during transmission over ATA bus (SATA or PATA). This type of errors can be indicated by
ICRC or ABRT error as described in the section called “ATA/ATAPI device error (non-NCQ / non-CHECK CONDITION)”.
Controller-specific error completion with error information indicating transmission error.
On some controllers, command timeout. In this case, there may be a mechanism to determine that the timeout is due to transmission error.
Unknown/random errors, timeouts and all sorts of weirdities.
As described above, transmission errors can cause wide variety of symptoms ranging from device ICRC error to random device lockup, and, for many cases, there is no way to tell if an error condition is due to transmission error or not; therefore, it's necessary to employ some kind of heuristic when dealing with errors and timeouts. For example, encountering repetitive ABRT errors for known supported command is likely to indicate ATA bus error.
Once it's determined that ATA bus errors have possibly occurred, lowering ATA bus transmission speed is one of actions which may alleviate the problem.
I'd also add; make sure you have good backups when ATA errors are frequent

New Data Basis using infocbe 0BCS_C11

Hi,
I am creating new data basis using Infocube 0BCS_C11 in SEM BCS 4.0. Data Stream has been generated properly. Company and Consolidation Profit Center has been assigned Role ''Consolidation Unit'.
However, I am not getting Company as characteristic in 'Authorization/Validity check' tab. I can see:
Consolidation Group
Consolidation Profir Center Group
Consolidation Profit Center
We are using Infocube 0BCS_C11 as we think that in future we might use Matrix Consolidation, though there is no current requirement. At present we are going to use Legal Consolidation only.
Can you please advise?
Best Regards,
UR

Solved. It was just saving and going out of the screen. Thanks

New Data Requirement!

Similar Messages

Maybe you are looking for