Data reconciliation from 2 datatargets to a new data taget

Hello Gurus,
I have a requirement of reconciling data from 2 data targets to a new data target, any suggestions are appreciated.
The Scenario is as follows:
Cube1 is in key figure model
Cube 2 is accounting model
Each account in Cube2 corresponds to one key figure in Cube1.
Now the data needs to be reconciled, if there is any difference it needs to be written in to another cube, A mapping table is available which contains which key figure corresponds to which account.
Thanks in advance.
Ganesh

Hi Ganesh,
I think, you can do this with APD: Use the two cubes as sources in an Analysis Process. Place a routine behind cube1 in order to enrich the cube data with the mapping information (I assume you have a DB table containing the mapping information), i.e. add the fields for the accounts.
Then join cube2 with the result of the routine.
Would this make sense? I am not sure, maybe it would be better to start with cube2 instead of cube1.
Kind regards,
Thomas

Similar Messages

Where does the data come from which powers the ship date and delivery date

Hi All,
Please let me know, where does the data come from which powers the ship date and delivery date?.
Adi.

Hi,
DELIVERY DATE will be maintain in the SALES DOCUMENT TYPES in VOV8 in the tab REQUESTED DELIVERY DATE/PRICING DAE/PURCHASE ORDER DATE.
The field is PROPOSE DELIVERY DATE .
If you check the field then the document created date will be the Requested date and will be carried from ORDER TO DELIVERY.
If you want the delivery date other thann the CURRENT date then you have to maintain the LEAD TIME in days in the same tab.
SHIP DATE: is the date on which you do the PGI in the delivery .
Please check them and revert back if u need further details
thanks,
santosh

Getting data transfered from old HD to new ones, leaving 2 slots filled . .

Hello,
*(Below is a thread I started in another forum, but, didn't get my final questions answered (see at bottom of this post in BOLD), and am hoping for further help and suggestions. I know there is a lot to read here, but, I think this information will help other novices, such as myself. Thanks!)*
I have 2 new HDs (each 1T) uninstalled, and I have my old HD (160 gigs) currently residing in one of the two slots in my G5. Any ideas on the best way/process to get the data transfered from the old HD to the new ones, leaving my two slots filled with the 2 new drives AND my data from the old HD transfered and intact, with a RAID0 setup?
OR, are there any other suggestions on a good setup with the 2 new HDs??
I'm open to suggestions.
I always back-up on external HDs, so, is their a need for me to worry about setting up a RAID0??
I'm doing video processing for DVD release.
Should I just max out the 2x1T gig HDs and not worry about a HD failure??
All Suggestions welcomed!!
Thanks, Jack
*FROM THE CUTTERMAN:*
You are limited with only 2 drive slots. In this scenario what usually works best is a small fast drive (eg Velocirapter or SSD) for OSX/Applications and a large drive for video files. It is not advisable to have the operating system running from a striped array.
Since you already have the drives, here is what you can do.
Install one new drive and format the partition you wish to use for OSX. You may not want to use the whole drive for OSX, so make 2 partitions. Be sure that it is GPT-formatted so it can boot.
Use CarbonCopy Cloner to copy your current OSX partition to the new one.
Set the startup disk as the new partition.
Remove the old drive and replace it with the second new one.
Reboot, and partition/format new drive.
*Hey Cutterman,*
Thanks for the advice. That sounds like a good set-up. I'll have to research the process of doing what you've advised, but, should work out ok:
A. Install one new drive and format the partition you wish to use for OSX. You may not want to use the whole drive for OSX, so make 2 partitions:
1. Partitions are done under Disc Utilities correct? Never done it before; will take a look.
B. Be sure that it is GPT-formatted so it can boot.
2. GPT is also done under Disc Utilities, correct? Here I start to get a bit confused, as I've formatted Extended Journal, SO, the partition with the OSX & Applications is formatted GPT, and the rest of the HD is formatted as Extended Journal?
C. Use CarbonCopy Cloner to copy your current OSX partition to the new one.
3. So, I partition the first new HD and use Carbon Copy Cloner (also under Disc Utilities) to copy the OSX & Applications from my original HD to the first new HD, correct?
D. Set the startup disk as the new partition.
4. This will be an option when I setup the partition???
E. Remove the old drive and replace it with the second new one.
F. Reboot, and partition/format new drive.
5. QUESTION: So, you recommend not striping the HDs: If I do a RAID 1, which sets up a mirror of the HDs, and since the first new HD is partitioned with the OSX & Applications, AND is set up as the Startup Disk, then the second new HD will also mirror that?? Another QUESTION: Even if the second new HD does not mirror the OSX & Applications, the second HD will only mirror the space/partition not utilized by the OSX & Applications partition, correct?
Thanks for your help!!
Jack
*FROM THE CUTTERMAN:*
OK I will try to answer your questions. To begin, if you want to mirror the 2 drives then you will need to boot from the SL install DVD or an external (USB/firewire) drive to set it up. IMO for your purposes it is too much hassle and a waste of HD space.
1) Yes partitions are created in Disk Utility
2) Yes, you choose a volume Scheme (ie number of partitions) and size them by dragging the separator bar. Then select the planned boot partition and click Options..., then choose GPT. I think it is usually the default but check and make sure. Extended journaled is the usual format.
3) You need to download Carbon Copy. It is a free tool that will copy the entire image of your current system partition to the new one and make it bootable. Consider making a donation as it is a very useful and frequently updated utility. It is fairly intuitive to use. You can also use the restore feature in Disk Utility but I have had more experience with Carbon Copy.
4) Once the copy process is finished the new boot partition will show up under the startup disk selections (this tool is in System Preferences).
*FROM 666Sheep:*
If may i correct one thing: OP, don't choose GPT (GUID Partition Table). You got PPC Mac (G5), so valid partition type for you is Apple Partition Map (APM).
GPT is for Intel Macs and you will not able to boot from this kind of partition.
*FROM THE CUTTERMAN:*
Thanks for the correction- my bad. No familiarity with non-Intel Macs.
G5 PowerMac, 2.5 GHz Dual, Dec. 2004, 6.5 GB RAM, 149 GB HD
*Hi All,*
*Since this process will come to a head on Tuesday/Wednesday, and I hope to be successful in transferring Old HD data to new HD/s.*
*A: I'm still a little foggy here, as I thought I'd set up the 2 new T-gig HDs so that if one of them failed, I'd still have the data backed up on the other HD; more ideas concerning this would be reassuring:*
*WHAT DOES "IMO" mean?*
*(IMO for your purposes it is too much hassle and a waste of HD space.)*
*As I understand the points made: After I partition the first new HD, and Carbon Copy data from old HD, I then install second new HD, and this will just act as an overflow from the first partitioned HD, correct? Because, if set up a Raid1/Mirror, the OSX partitioned portion of the first new HD will not copy to the second new HD, and that space on the second new HD will be wasted, correct?*
*Also: I have to set up RAID1 (if I do not set up RAID0), correct?*
*RAID 1*
*From WIKI: RAID 1 mirrors the contents of the disks, making a form of 1:1 ratio real time mirroring. The contents of each disk in the array are identical to that of every other disk in the array. A RAID 1 array requires a minimum of two drives.*
*Carbon Copy is a free tool that will copy the entire image of your current system partition to the new one and make it bootable.*
*1. Is my old HD partitioned? Is that done automatically by MAC prior to PC purchase?*
*2. Do I Carbon Copy the whole old HD or just parts? (eg. OSX, Photo Shop, After Effects, Various Files)*
*3. I read that it is necessary to DEACTIVATE Photo Shop (I have CS3) prior to doing Carbon Copy. Is that correct? If so, does this also apply to other Adobe applications? Such as After Affects, Illustrator??*
*Thanks to all for the help!!*
*G5 PowerMac, 2.5 GHz Dual, Dec. 2004, 6.5 GB RAM, 149 GB HD*

Confusing Information:
A1: You also want to make sure the drive you are backing up to is formatted Mac HFS Extended (HFS+) if using Mac OS 8.1 or above.
A2: On PowerPC Macs, your clone should be partitioned as Apple Partition Map.
*Q? I thought the new HD (1T) should be formatted in Extended Journaled?*
B: Also disable Spotlight (in 10.4 only) on your destination drive using Apple menu -> System Preferences -> Spotlight -> Privacy to add the destination drive to the pane.
*Q? I'm using 10.4.11, so, I should follow these instructions?*
C: If possible, boot into safe mode to perform the backup (holding the SHIFT key at startup). In addition, you can clone while logged into another administrative user that you don't use at all to avoid further complications of changes which may be happening to your regular user (though don't use Fast User Switching to get into that other user, since that other user is still active when fast user switching is used). Otherwise you are going to be running a backup on a live system which could have changes happening while you are attempting to backup. These may yield an imperfect clone, with uncertain success at recovery. It may be possible that your clone will have its own hardware issues, so make at least two copies.
*Q? ?????????????*
*I GOT THE ABOVE INFO. FROM THE FOLLOWING SITE:*
Making a clone/mirror/duplicate backup
http://www.macmaps.com/backup.html#SHORTANDEASY
*ALSO, WHAT DO YOU THINK ABOUT THE ADVICE ON THIS PAGE:*
http://www.levoltz.com/2010/04/21/how-to-transfer-data-to-your-new-hard-drive/

New GL Migration - Data transfer from Classic GL to New GL

Hi Champs!
Our client is on ECC6.0, with classic GL functionality. Now they want to migrate to New GL and they have already procured SAP New GL migration services. Wanted to know, whether this migration service will take care of data transfer from tables of classic GL to tables of New GL with appropriate New GL functionalities like document splitting etc.
Your feedback will help a lot.
Thanks,
Amish.

Hi Amish,
https://websmp207.sap-ag.de/GL
This link will help you find all documentation pertaining to New GL concept from SAP.
thanks and regards
Praveen.J

Using Migration Assistant to Move Data Files from one Account to New User

Is it possible or recommended to use Migration Assistant to move data files from an old user account to a new user account on the same volume/hard disk?

Migration Assitant cannot be used as a simple file transfer utility. MA can transfer an entire Home folder or entire Users folder but not individual files.
In general files in one user account cannot be moved to another user account as this would violate built-in security measures.
What you can do is to copy the files to an external device like a hard drive or flash drive. First log in to the old account. Then configure the drive to ignore preferences by Pressing COMMAND-I to open the Get Info window and check the Ignore permissions on this volume checkbox at the bottom of the window. Copy your files to the device. Log into the new account. Verify the external drive is still configured to ignore permissions (reset it, if not.) Copy the files from the external device into the Home folder of the new account. I would create a temporary folder for these files. If you still end up without the proper permissions you will need to make modifications that are easier done if all the files are in a single folder.

Data transfer from Time Capsule to new Mac

I have a MBP which up until 7 days ago had Mountain Lion on it. The week before that, i had major abdominal surgery and when i was in the hospital, i accidentally knocked a bottle of water over and it fried my MBP. I would not turn on after that.
I took the MBP to the Apple Store for it to be repaired, at a cost of about $800. Meanwhile, i bought a new MBP. Both computers are the same with 2.5Ghz intel processor Core i5. As far as i know, the only difference is that the newer one has a 500GB HD and the older one has a 1 TB HD, and the older one ran Mountain Lion while the new one came with Mavericks.
I had the older computer backed up on a Time Capsule. When i got the newer one, i turned it on and went through the set up process. When asked at the beginning if i wanted to transfer stuff over from another computer or drive, i said 'ask me later' or something like that. I have never used Migration Assistant before and did not understand it well enough to use it.
I transferred the backed up data on Time Capsule to the new computer wirelessly. It worked fine. When i got done,
the hard drive looked like the old one, same set, same files on the desk top, dock arranged the same way, same Safari bookmarks, and also, the same third party
programs and data, with one exception, but for the most part it was the same.
Since i set up the new computer, it has been having regular back ups onto Time Capsule.
Now, i have the older computer back, repaired. The older computer no longer has Mountain Lion. It has Mavericks OS 10.8.5. The newer computer has OS 10.9.3.
I want to do the same thing i did a week ago in order to transfer the data to the older now repaired computer, but i can't remember what i did, i'd never transferred data from Time Capsule before. I have not been in the best shape mentally, having been cut open with a 10 inch incision and pain pills.
All i know is that whatever i did, it was very easy, i believe i used Time Machine to do it, and it transferred my third party programs with their data. It did NOT involve using Migration Assistant.
I don't plan on using the newer computer. i plan to go back to using the older one which has the larger hard drive.
Both computers have the same user account names and login info. I just want to replace what is currently on the older freshly repaired MBP with what is on the Time Capsule.
I am not sure if my question is very clear but i'm wondering if anyone can tell me how i can transfer the data from my Time Capsule to my older now repaired MBP without using Migration Assistant (which i think would not transfer my 3rd party stuff). i just want to do what i did a week ago but can't remember what i did. I think i used Time Machine, i connected the computer and Time Capsule (or they were already connected wirelessly).
I did NOT choose Enter Time Machine. I think i went in to Time Machine Preferences and clicked on 'Select Disk.' I think i selected a disk that has the name of my Airport connection and has the word Data on it. Does that sound possible?
Does anyone know what i'm talking about from experience or other knowledge? because i'm inexperienced with this process and am not very clear about what happened, but i know it didn't involve Migration Assistant and it didn't involve Time Machine > Enter Time Machine, because i have never seen those before today.
Whatever i did, it was so easy, just click on the disk i wanted to transfer data from and click some button that meant "ok" or "connect" or "transfer." And then, just wait, and after some time, my computer was set up reflecting the back up from Time Capsule, including third party stuff.
Thanks for any help with this.
btw, in Time Machine now, under Select Disk > Back up disks, there are two boxes. The first box says Backup Disks, and in that box is the name of my Airport connection, i.e. the Time Capsule i guess, and on the icon, it says Data. In the second box, it says Available Disks, and in that box, it has an icon of a disk with the name of my Airport or Time Capsule and it has an icon of a Wifi symbol which has the name, Other Time Capsule. Apparently that is an option to set up another Time Capsule not listed. I wonder if i chose one of those icons and clicked "Use Disk", would that data be transferred to my now repaired computer?

(Sorry, after i posted this, i discovered it posted it in the wrong product forum, i guess when i typed in what i was interested in, it just took me to the Snow Leopard forum. i don't see a way to delete my post. Maybe the answer will be the same?)

Data import from old system to new system, key by raw16 column

hi, experts,
now, I have a new system, the system design is to use raw(16) column as key column in all database tables.
of course, when new system goes live (in production), all new transaction records are written to new system database.
when the new system inserts new records, it handles itself to avoid conflicts by value of the raw(16) key column
I now face this issue:
I need to import data from old system to new system, I use sys_guid() to fill up the raw(16) column in new system database.
how can I avoid the conflict from value of raw(16) column between old system data and new system database data?
the sql I write is very simple:
insert into new_sys_table_a (key_column_raw_16, ..., ... )
select sys_guid(), old_sys_col_a, old_sys_col_b
from old_sys_table_a;

Manik wrote:
Hi,
Can you try this as a synch script (you can call so), sys_guid is a sequence, so just run through till u have sequence surpassing your old sequence. Give it a try.. I did not test it, but algorithm might be helpful for you.. Since when did sys_guid become a sequence that can be compared to other sys_guid's to know if it's been surpassed or not?
SQL> ed
Wrote file afiedt.buf
1 select sysguid
2        ,case when sysguid < lag(sysguid) over (order by lvl)
3              then 'Lower than previous'
4         else 'Higher than previous'
5         end as comparison
6 from (
7        select level as lvl, sys_guid() sysguid
8        from dual
9        connect by level <= 10
10*      )
SQL> /
SYSGUID                          COMPARISON
BBF16F0B5B8946F59FE0FEE0FE35729B Higher than previous
A6E63DDA4E4342E5A8AAD267FE44A7AF Lower than previous
8632B901474A468C98D7B4020590CBD9 Lower than previous
36012FD6FA764520B77CF1E06830F2DC Lower than previous
E35F3455C24444C0991EB62BE7431463 Higher than previous
A5E5CDBD164A4DB8966E85B5BF4C5C1A Lower than previous
7A0FFBC6221348A5BDF4858D05876201 Lower than previous
A9EF3B5EFFB74C4FA74E1C45186510AA Higher than previous
806839AE5AE04D3998BA5DEBA84AD05C Lower than previous
F0B235376A4045D7A644345E7FAF0FF4 Higher than previous
10 rows selected.Doesn't look like much of a sequence to me

Is there any Tool for successfully migrating the Infopaths data connection from old URL to new URL?

Hi Support,
In my Project we are trying to migrate sharepoint 2007 Infopaths to sharepoint 2013 Infopaths(there are some 20000 infopaths).Here we want to change the Data Connection from old to new connection.
So please let me know if there is any tool to migrate sharepoint 2007 infopaths data connection to sharepoint 2013 infopaths data connection.
Thank You in Advance for your help.
Regards,
Pradeep

Hi Pradeep,
As far as I could search, there is no built-in feature to batch updating InfoPath forms, I’d suggest you consider script or third party tool. Here are the links that might help:
http://sharepintblog.com/2011/06/07/updating-infopath-form-templates-and-data-connections-with-powershell/
http://www.dotnetfunda.com/articles/show/2829/migrating-infopath-2007-form-to-2013-forms
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety,
or suitability of any software or information found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Regards,
Rebecca Tu
TechNet Community Support

How to get the date starting from 1 to the current date from the system dat

Dear all,
Please tell me how to get the date starting from 1 based on the system date
and it should come with respect of time also.
example.
suppose today is 6 Dec, 2006
so ABAP report should find the 1 dec. 2006.
Please help me as soon as possible.
Regards,

concatenate sy-datum0(2) '01' sy-datum4(4) into v_firstdate.
or yo ucan use the fm:
HR_JP_MONTH_BEGIN_END_DATE
usage:
    call function 'HR_JP_MONTH_BEGIN_END_DATE'
         exporting
              iv_date             = sy-datum
         importing
              ev_month_begin_date = gv_begda
              ev_month_end_date   = gv_endda.
Regards,
Ravi
Message was edited by:
        Ravi Kanth Talagana

Insert data to MySQL when there is new data in the text file

I have one log file, the log file will update its data (alarm type & datetime) when there is alarm. If I would like to write program to monitor the log file every minute, and insert the data to mysql when there is a new data in log file. Any Idea how to use java to write it ?
Thanks !

imagination21 wrote:
Any Idea how to use java to write it ?Yes. But do you have a specific question? What's the problem?

Data migration from rescued drive to new internal drive

Need assistance! I recently experienced a hard drive failure on my MacBook (OS 10.5). Apple replaced my hard drive with a new one (running 10.6), and a data recovery company was able to resuce the data from my failed drive; they put it all on an external drive. I then used migration assistant to get my old data back onto the new drive. The problem is that my old home folder was encrypted with File Vault, so that data would not transfer -- i.e., my photos, music, bookmarks, old emails, etc.
I've tried booting up from the external drive, but no dice. The laptop sees the drive and looks like it attempts to start up from it, but it just keeps spinning. Are there any other tricks to access my old home folder in order to turn off File Vault so that I may transfer that data onto my new hard drive?

I tried it and i got the runtime error with "Microsoft Visual C++ Runtime Library"
When I tried a part of options, that is no problem at all. However, when i select all options, the memory usage is increase and then the error will be returned.
The server is Win2003 with 4GB memory.
From Samson
Edited by: samson leung on Sep 21, 2009 6:40 PM

How to change data format from [IMAQ create -- output -- New Image ] to [Unflatten Pixmap VI -- input -- image data]

hi gays,
i have two program,
the first one use {IMAQ create} to get a image from USB webcam,
the second one is picture data process which use [Unflatten Pixmap VI] to get a image data from a BMP file.
Now I want to combine this two program, but data format don't match between the output of {IMAQ create} and the input of [Unflatten Pixmap VI].
My LabVIEW version is 2009
What can i do??

Do you have VDM? Did you try "Image to array"?

Question about data migration from one company to new without transactions

Dear All,
My company is using SAP B1 2005B. I would like to create new company which is based on existing one, including all configuration, chart of A/C and BP records and so on. May I know how to do it?
From Samson

I tried it and i got the runtime error with "Microsoft Visual C++ Runtime Library"
When I tried a part of options, that is no problem at all. However, when i select all options, the memory usage is increase and then the error will be returned.
The server is Win2003 with 4GB memory.
From Samson
Edited by: samson leung on Sep 21, 2009 6:40 PM

Nike+ data transfer from old ipod to new ipod

My gen 1 ipod just died on me after 4 years Ive been runing how do i transfer the workouts and miles form my old ipod to my new ipod i dont want to start at 0 miles

follow the steps given here...
Syncing to a "New" Computer or replacing a "crashed" Hard Drive

Data Extraction and ODS/Cube loading: New date key field added

Good morning.
Your expert advise is required with the following:
1. A data extract was done previously from a source with a full upload to the ODS and cube. An event is triggered from the source when data is available and then the process chain will first clear all the data in the ODS and cube and then reload, activate etc.
2. In the ODS, the 'forecast period' field was now moved from data fields to 'Key field' as the user would like to report per period in future. The source will in future only provide the data for a specific period and not all the data as before.
3) Data must be appended in future.
4) the current InfoPackage in the ODS is a full upload.
5) The 'old' data in the ODS and cube must not be deleted as the source cannot provide it again. They will report on the data per forecast period key in future.
I am not sure what to do in BW as far as the InfoPackages are concerned, loading the data and updating the cube.
My questions are:
Q1) How will I ensure that BW will append the data for each forecast period to the ODS and cube in future? What do I check in the InfoPackages?
Q2) I have now removed the process chain event that used to delete the data in the ODS and cube before reloading it again. Was that the right thing to do?
Your assistance will be highly appreciated. Thanks
Cornelius Faurie

Hi Cornelius,
Q1) How will I ensure that BW will append the data for each forecast period to the ODS and cube in future? What do I check in the InfoPackages?
-->> Try to load data into ODS in Overwrite mode full update asbefore(adds new records and changes previous records with latest). Pust delta from this ODS to CUBE.
If existing ODS loading in addition, introduce one more ODS with same granularity of source and load in Overwrite mode if possible delta or Full and push delta only subsequently.
Q2) I have now removed the process chain event that used to delete the data in the ODS and cube before reloading it again. Was that the right thing to do?
--> Yes, It is correct. Otherwise you will loose historic data.
Hope it Helps
Srini

Data reconciliation from 2 datatargets to a new data taget

Similar Messages

Maybe you are looking for