New Data Transport Routine

Hi,
I am in the process of writing a new Data Transport Routine (RV60C702) for creating Billing documents (Maintain Copying Control for Billing Documents). I was informed that the new Routine's name (RV60C702) should be added in the Include 'RV60CNNN' and I was also informed that while transporting the new Routine (RV60C702) to the Production systems, I should add the Program 'RV80HGEN' also in a new transport which should be run in the Production system to include the new routine in the include 'RV60CNNN'.
Could anyone please let me know how should I add the program 'RV80HGEN' in a new transport to make it run in the Production system.
Could you please provide me some details on it.
Thanks
Priya

Hi Naren,
Thanks for the quick help!
One more basic question. Can I add this Program in the same transport & in the same task which has the new routine or should this program be added to a new transport?
Thanks..
Priya

Similar Messages

Regd Data Transfer routine Transport

Hello All,
I have created a Copy Control Data Transfer routine 60X in the Development System. This created a Include RV45C60X in the Include RV45CNNN. When I check the where used list for RV45C60X it shows Include RV45CNNN. When I transported it to Quality System this Include was created but it was not in the Include RV45CNNN and the system was giving a short dump when SO created with reference to Quote.
I executed the program RV80HGEN and than also generated the Program RV45CNNN in the Quality system. Than the Include RV45C60X was shown in Include RV45CNNN and the system works fine. The where used list for RV45C60X does not show RV45CNNN even though it is in the Include RV45CNNN. Is that ok or something more needs to be done.
Can you please clarify.
Thanks,
SNK.

Hello friends,
Any suggestions for this. Or is this not an issue.
Thanks,
SNK.

New Data in R/3 Enterprise - ABAP Proxies - XI what happen?

Hi,
i have a theoretical question:
if i use R/3 Enterprise on WAS and put new Data in the R/3 System and transport them to XI with ABAP Proxies. What happens in the systems?
How do the R/3 System put new data in the proxy runtime and send them to xi?
I want to unterstand how the transport from new data in a R/3 System with ABAP Proxies comes to the XI Integration Server.

Hi Marcel,
>>>>>How do the R/3 System put new data in the proxy runtime and send them to xi?
all you need to do in r3 is to fill tables of a generated structure
and execute one method of a generated class (send....)
then R3 will connect over HTTP to XI and send the data from your structures
structures and class in R3 is being generated automatically via TCODE SPROXY
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

DSO activation: Data in new data table but missing in active data table?

we use an end routine in transformation to populate a data field in DSO.
it works as we can see the value populated in new data table.
when we activate (activation) DSO, we see the value is deleted from this data field.
why?
this data field is set as an characteristic info obj in the data field portion of the DSO.
we are using 2004s, I forget to check the SP level.
George

good job ,thanks for the update and good luck.
I saw it late on this, else i never miss OSS notes
Chetan
@CP..

Data not going from active data table to new data table -DSO activation iss

Hi Experts,
Data is going from DSO1 to DSO2. I see some of the records are getting missed in DSO 2 which are supposed to come.
There is start routine from DSO1 TO DSO2 and as per the start routine some records should come but they are getting missed.
Apart from that..to DSO 2 there are 4 other DSO sending data.
I tried to send single record and saw that data is going

Hi Experts,
Data is going from DSO1 to DSO2. I see some of the records are getting missed in DSO 2 which are supposed to come.
There is start routine from DSO1 TO DSO2 and as per the start routine some records should come but they are getting missed.
Apart from that..to DSO 2 there are 4 other DSO sending data.
I tried to send single record and saw that data is going to New data table and upon activation it does not go to Active data table.
Please suggest.
Regards
Sudha

Data reconciliation from 2 datatargets to a new data taget

Hello Gurus,
I have a requirement of reconciling data from 2 data targets to a new data target, any suggestions are appreciated.
The Scenario is as follows:
Cube1 is in key figure model
Cube 2 is accounting model
Each account in Cube2 corresponds to one key figure in Cube1.
Now the data needs to be reconciled, if there is any difference it needs to be written in to another cube, A mapping table is available which contains which key figure corresponds to which account.
Thanks in advance.
Ganesh

Hi Ganesh,
I think, you can do this with APD: Use the two cubes as sources in an Analysis Process. Place a routine behind cube1 in order to enrich the cube data with the mapping information (I assume you have a DB table containing the mapping information), i.e. add the fields for the accounts.
Then join cube2 with the result of the routine.
Would this make sense? I am not sure, maybe it would be better to start with cube2 instead of cube1.
Kind regards,
Thomas

Data arrived in ODS new data - all data fields are cleared

Hello Experts
We are loading every day since 3 years data into a DSO There is a simple start routine.
Issue:
Suddenly 1x record out of 12'000 records loses the data fields or in other words the data fields are cleared. The key part of the record still extists. The table of new data shows the record with all cleared data fields. Thus before activation the data are lost already somwhere in updating.
We dont use expert routines, no end routines ect. It is a simple 1:1 transformation with a simple start routine.
We debugged the start routine and the record still exists correctly at the end of the start routine with all entries in the data fields.
So quite tricky and we hope of some good ideas , you may help us.
Thanks a lot for your input and help
Christian
Our system is SAP BW 7.01 on DB6

Hello Raf
The data request has been split in 2 x data packages.
And the erroneous record was exactly the last data record in data package 1.
I have than increased the data request size from 10’000 Records to 50’000
records (default) and it worked than perfectly without clearing any data
columns
For me absolutely not understandable, why this can happen.
Do you have an idea.
Best regards
Christian

How to call routine and pass data to routine in vofm

Hi Experts,
I need to update KBETR and KWERT values present in 'Conditions Tab' in Purchase Order (ME21N/ME22N).
I have created a new customer tab in which we enter amount field and percentage filed. When user enters some value in this and clicks on 'Conditions Tab', calculation has to be done and the calculated value has to be appeared across a specific condition type.as i am new to abap i dont know how to create routine and pass data to routine in vofm from customised tab in me21n .
Thank's in advance

Hello Rajendra,
You can get plenty of forums in SCN related to it. Follow below steps to create VOFM routine.
Go to VOFM Transaction Code
1. On the Menu Select required Application i.e Pricing
2. Enter any Number in between 600 to 999 for Custom Developments.
3. On entering Pop Screen appears ask for Access Key(We have to remember that Every New Routine needs an Access Key)
4. Once the Access Key is received we can do modification.
5. Enter the Routine Number ,description and insert the Access Key
6. Now the ABAP Editor will open and required code can be copied from Standard SAP Routine and Custom Code Can be developed.
7. Once the coding is completed we have to Activate the Routine
8. Select the Routine and Go to Edit – Activate
9. Ensure that Active check box is ticked upon Activation of the Routine.
10. Double click on the routine will enter into ABAP Editor, we have to generate the Routine
11. Go to Program and select Generate
12.A screen pops up with the related Main Programs and select all required main programs wherever the Routine is being called.
13. Once the Routine is Generated and Activated, We need to configure the Routine in the config.
** Important SAP note: 156230.
Check the below document too.
http://www.scribd.com/doc/35056841/How-to-create-Requirement-Routines
Regards,
Thanga

DSO New data table rejects data

Dear SDNers,
I have a critical issue.
I am loading data into a DSO (which has end routine, lookup DSO of 2crore records in production)
In development, it worked good.
In Production it took very long time to load data. I initially thought it might be because of the lookup DSO. But it never loaded the data into new data table. The data load monitor results in yellow always.
I used filter in DTP and loaded only limited data. But this also not loading data. The data load monitor results in yellow again.
Then I found that i am unable to access the new data table's data browser (from manage).
I checked with se11 also, I am able to see the table. But if I click contents, the system hangs.
So what I observe is New data table is not allowing to post any new entries?
Kindly give me some insight regarding solving this issue.
Thanks,
Guru

Hi Prasanth,
I didnt say as i am able to see data in change log. I said I am able to access the data browser of both Active and change log table.
and @Saveen, I donot want to load data manually to new data table.
To be Precise i ll answer pransanth questions here..
What is the status of the load in the monitor screen. Yellow (still running)
Is the load completed or not? what is the record count? No the load is not completing.
Is the request active in the DSo and available for reporting? Request is active
Are you facing this issue for the first time? Yes for the first time and only in this DSO.
Are you sure you have authorizations to check the data through manage screen, try to run the Authorization trace on your id and check if the roles are there for your id or not? Yes, I am able to see active data table, change log etcc. even new table of other DSOs. Only new table of this DSO is inaccessible from manage
See, I used filter in DTP, so it ll bring only limited records from lookup DSO. So no issue with the performance deadlock.
And again I simulated the load and saw, Result package gets filled up perfectly, So the code also works fine.
but if I load the data itll be yellow status with no records added in new table.
In this scenario, New table is inaccesible from manage, So I am pretty sure that both are interrelated issues.
Can some one help me pls..
Thanks,
Guru

Error after migrating new copy control routine

Hi,
I have created a new copy control routine in dev environment. It works fine there. When we migrated the transport to all QA environments getting dumps that the form is missing. I checked the routine and form in VOFM and it does exists. Am I missing a step here or need to do something after migration?
-Minhaj.

go to se38 enter program name RV80HGEN - execute.
You need to generate newly created routines
You have to do this in each client where you transport this.
Edited by: Sampath Kumar on Nov 5, 2009 10:36 AM

Problem in Activating from New data to Active data in DSO

Hi All,
For my DSO I am fetcdhing some fields from other DSO table , through END Routine ,. After running the DTP , I am getting data for the fileds which i am fetching through routine in New data Table.
After Activating the New data table to Active data table I cant able to see my data.
ie in Active data table there is no data for the fields which i am fetching through end routine after activating the request . One more thing my request is activated sucessfully.
it shows ready for reporting.
Please help me on this................................

Hi ,
After unchecking the checkboxes mentioned in my previous post and still if you dont find data in active table then I think the problem might be because of Database Statistics not being up-to-date for your ODS tables which causes a delay in data load completion process. You can try refreshing the Database Statistics of your ODS both tables and indexes (active data table, change log table and new data table). This probably may resolve your problem.
Srikanth.

Copy data transfer routine.

13.01.2009
Hello Gurus,
How do we make a copy of data transfer routine ??? I dont find any copy option ??
Regards,

There is sort of a trick you can use. In VOFM transaction, find the routine you wish to copy. Switch to Change mode (Ctrl-F1), then place the cursor in the field with the routine number and simply type the new routine number (e.g. 901) over the existing one. When you hit Enter, you'll be prompted to enter an access key to create a new routine.
Access key may be obtained on the SAP's website (if you have an authorization) or from your Basis admin, as mentioned above.
Copy/paste would also work, of course, after you have created a new, blank routine.

Date1+5 working day = new date.

Hi all ,
I have once date field .and want to add 5 working day in that and calculate new date
i.e date1+5 working day = new date.
How i can do the same
thanx

First of all pass the dates
like pass date to this Fm and check whether it is a working day or not .
<b>
DATE_CHECK_WORKINGDAY</b>
if sy-subrc eq 0 ""---> working day
then add that date to date1 -->
else
increment the date and again call the fm in the perform routine ..
endif .
u need to set a counter for 5 working days to make this count and skip the perform .
2. Use this Fm and some code logic will solve ur query .
3. Remember before using this Fm try to know the calender id for that specific country .
Regards,
Vijay.

Data deletion routine in the info package

Hi All,
I am writting an data deletion routine in the info package.
it is working fine...
but when we are transporting the info package, that routine is not getting transported.
we have tried sending ths info package through a transport connection.
but still it is not taking the routine to next system.
please let me know if any one has a solution for this.
Thanks,
Mugdha

Hi Mughda,
Collect the infopackage using transport connection, While collecting the infopackage make sure that Routines are also collected in the same request.
Else most of systems will have authorizations to create infopackages, so try to create one IP and use the routine in IP.
Hope this helps.
Rgs,
I.R.K

Adding New Data To Same Page - HELP

I am trying to put together a invoice on the fly, the products are added to the invoice by selecting the disired product from a drop down menu and hitting the add button. You SHOULD then be able to select more products from the same drop down menu and htting add again will include it in the invoice.... simple?? Well the problem i have is that when i hit the add button to add another item it just replaces the one i have already added.... this is very annoying... i cannot think of a way to take the product data through the form submission ready for adding too.
Any Ideas this is really bugging me, and the more time i spend on it, the worse its getting. Code Below
<%@ page buffer="32kb" %>
<%@ page import="java.sql.*, javax.servlet.ServletException, java.io.IOException, com.stock_control.*" %>
<%!
String convertResultsToSelect ( ResultSet rs, String selectName, String idCol, String descCol ) throws SQLException
StringBuffer sb = new StringBuffer ( "<select name=" + selectName +">" );
if (rs != null) {
while (rs.next()) {
          sb.append ( "<option value=" );
sb.append ( rs.getString(idCol) );
sb.append ( ">" );
sb.append ( rs.getString(descCol) );
sb.append ( "</option>" );
sb.append ( "</select>" );
return sb.toString ();
%>
<html>
<head>
<title>Members Area - Stock Check</title>
</head>
<body bgcolor="#CCCCCC" topmargin="0">
<%@ include file="topConn.jsp" %>
<%
          String msg = "";
          String name = "";
          String address1 = "";
          String address2 = "";
          String town ="";
          String postcode = "";
          String country = "";
          String phone = "";
          String mail = "";
          String comments = "";
          float total = 0;
          int nextFree = 0;
          String prodResults;
          int numberOfItems = 0;
     String shop = (String)session.getValue("SHOP");
     String selectProd = "SELECT ProductID, ProductName FROM product WHERE ShopID=";
     rs1 = stmt.executeQuery(selectProd+shop);
     prodResults = convertResultsToSelect( rs1, "product","ProductID","ProductName");
     rs = stmt.executeQuery("SELECT COUNT(*) AS stockLevel FROM product WHERE ShopID ="+shop);
while(rs.next())
     numberOfItems = rs.getInt("stockLevel");
     Product[] products = new Product[numberOfItems];
if (request.getParameter("add")!=null)
          // get values from all text boxes....
          name = request.getParameter("name");
          address1 = request.getParameter("address1");
          address2 = request.getParameter("address2");
          town = request.getParameter("town");
          postcode = request.getParameter("postcode");
          country = request.getParameter("country");
          phone = request.getParameter("phone");
          mail = request.getParameter("mail");
          comments = request.getParameter("comments");
               // add data from dropdown
          String newProduct = request.getParameter("product");
          //connect to database and put product data into array + increment
               int thenewid = 0;
               String theName = "";
               float thePrice = 0;
               String nono = "0";
          String getProd = "SELECT * FROM product WHERE ProductID=";
          rs = stmt.executeQuery(getProd+newProduct);
          if(rs.next())
               thenewid = Integer.parseInt(newProduct);
               theName = rs.getString("ProductName");
               thePrice = rs.getFloat("SalePrice");
               Product addProduct = new Product(thenewid, theName, thePrice, nono);
               products[nextFree] = addProduct; //PROBLEM
               nextFree++;
// reload page with new data in form
//for loop arround array
%>
<form method="GET">
<div align=center>
<p>
<%=prodResults%>
<input type="submit" value="Add" name="add"></p>
<TABLE width=100% height="1">
<TBODY>
<tr>
<td width="4%" height="19"> </td>
<td width="96%" height="19">
</td>
</tr>
<tr>
<td width="4%" height="198"> </td>
<td width="96%" height="198">
<div align="center"></div>
<table border="0" cellpadding="2" style="border-collapse: collapse" bordercolor="#111111" width="100%" id="AutoNumber5">
<tr>
<td width="4%"> </td>
<td width="15%"><font face="Verdana" size="2">Customer Name</font></td>
<td width="30%"><input type="text" name="name" size="30" value="<%=name%>"></td>
<td width="19%"><font face="Verdana" size="2">Customer Phone #</font></td>
<td width="26%"><input name="phone" type="text" size="30" value="<%=phone%>"></td>
<td width="6%"> </td>
</tr>
<tr>
<td> </td>
<td><font face="Verdana" size="2">Address Line 1</font></td>
<td><input type="text" name="address1" size="40" value="<%=address1%>"></td>
<td><font face="Verdana" size="2">Customer E-mail</font></td>
<td><input name="mail" type="text" size="30" value="<%=mail%>"></td>
<td> </td>
</tr>
<tr>
<td height="32"> </td>
<td><font face="Verdana" size="2">Address Line 2</font></td>
<td> </td>
<td><font face="Verdana" size="2">Comments</font></td>
<td width="26%" rowspan="5"><p>
<textarea name="comments" cols="29" rows="5"><%=comments%></textarea>
</p>
<p> </p></td>
<td> </td>
</tr>
<tr>
<td> </td>
<td><font size="2" face="Verdana">Town/City</font></td>
<td><input name="town" type="text" size="40" value="<%=town%>">
<input name="address2" type="text" size="40" value="<%=address2%>"></td>
<td> </td>
<td> </td>
</tr>
<tr>
<td> </td>
<td><font size="2" face="Verdana">Post Code</font></td>
<td><input type="text" name="postcode" size="10" value="<%=postcode%>"></td>
<td> </td>
<td> </td>
</tr>
<tr>
<td> </td>
<td><font size="2" face="Verdana">Country</font></td>
<td><input type="text" name="country" size="40" value="<%=country%>"></td>
<td> </td>
<td> </td>
</tr>
<tr>
<td height="24"> </td>
<td> </td>
<td> </td>
<td> </td>
<td> </td>
</tr>
<tr>
<td height="23"> </td>
<td><strong><font size="2" face="Verdana">Product Code</font></strong></td>
<td><strong><font size="2" face="Verdana">Name</font></strong></td>
<td><strong><font size="2" face="Verdana">Price</font></strong></td>
<td> </td>
<td> </td>
</tr>
<%
if (request.getParameter("add")!=null)
for(int i=0; i<nextFree; i++)
Product temp = products;
int prodID = temp.getid();
String prodName = temp.getname();
float prodPrice = temp.getprice();
total = total + prodPrice;
// work out total on the fly
%>
<tr>
<td height="23"> </td>
<td> <font size="2" face="Verdana, Arial, Helvetica, sans-serif"><%=prodID%> </font></td>
<td><font size="2" face="Verdana, Arial, Helvetica, sans-serif"><%=prodName%></font></td>
<td><font size="2" face="Verdana, Arial, Helvetica, sans-serif">£<%=prodPrice%></font></td>
<td><font size="2" face="Verdana, Arial, Helvetica, sans-serif"> </font></td>
<td> </td>
</tr>
<%
%>
<tr>
<td width="4%" height="23"> </td>
<td width="15%"><font size="2" face="Verdana, Arial, Helvetica, sans-serif"> </font></td>
<td width="30%"><font size="2" face="Verdana, Arial, Helvetica, sans-serif"> </font></td>
<td width="19%"><strong><font size="2" face="Verdana, Arial, Helvetica, sans-serif">Total:</font></strong></td>
<td width="26%"><font size="2" face="Verdana, Arial, Helvetica, sans-serif"><%=total%></font></td>
<td width="6%"> </td>
</tr>
</table>
<p align="center">
<input type="submit" value="Continue" name="continue">
          </form>
</p>
</td> </tr> </TBODY></table>
<%@ include file="bottomConn.jsp" %>
</body>
</html>

anyone?

New Data Transport Routine

Similar Messages

Maybe you are looking for