New Discussion Boards - Please Read

This board has been created to host discussions regarding K, S and Vibe Series Lenovo Smartphones, all threads have been moved from the old board and that board has been closed.
There were quite a number of threads which had no phone type in the subject line or content of the thread. If you are unable to find a thread you have previously contributed to you might like to follow the method suggested in the following KB article;
http://forums.lenovo.com/t5/Forum-Housekeeping-Knowledge/How-do-I-find-messages-I-have-posted/ta-p/6...
Andy
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество

I have a simple answer: "Cubicle" by rinocerose.
charlie

Similar Messages

Is it time for a new SSD? Please read my story, my battle with my M4 Crucial SSD

This is whats been happening the past couple of days and what I have been doing to try and isolate what is causing my fresh win7 install to have so many issues running. IMO, i've narrowed it down to be an issue with my SSD, and not my RAM. Please read, and advise. So I changed out my p8z68 MB and ivy bridge CPU for a new maximus VII hero and Devils Canyon Haswell cpu. After installing windows I noticed it was running sluggish and would not install updates successfully or without crashing.Over 3 attempts of reinstalling win7 64bit. The build kept crashing, failed to fix windows startup, MBR error 01 or getting the BSOD. I firt tested my RAM... I ran memtest86 with 100% pass and found and isolated that 1 of the 4 x4gb of my Black Vengeance Corsair ram had errors on it (ram is 3 years old in use). I ended up taking those out and replacing with brand new 2 x 4gb Gskill sniper sticks I had still in packaging. I re-ran Memtest86 on the new RAM just to be sure and ....no errors. I want to emphasise that by now I've reinstalled window 3 times on this build upgrade....noticing a lot of lag, in windows after fresh install . Especially when opening programs like windows update windows as well as other things like, device manager or even a Web browser. If I have more than one window open. My hard SSD LED on my front panel, lights up like it's busy, browser and programs freeze or I get a program "not responding" error, on top until I wait it out...then it disapears. Finally I did another OS install..this time and after much research, I made sure to run a Secure Clean All, on my Crucial M4 SSD (it too has been used for the past 3 year). I had already updated its firmware to 070H a long time ago. I also made sure I had the most current Intel, SATA, VGA, LAN, and sound drivers were downloaded. Durring Windows update it reached 140 of 149 updates before receiving a BSOD again even with the new ram! After Reboot... I went in and this time before running Windows update...again, I made sure all my services were closed and did a "CLEAN" Boot to windows. Doing this finally made my system able to dowload all the updates successfuly. Ok so now that Win7 is fully updated, I got my antivirus ..norton on. More updates, with little issue. But I still notice while my SSD is writing, I say thats what its doing when my computers fornt panel LED is flashing, that the program / software/ game im installing freezes, until it has a chance to "Catch up" , Or install fails, or for instance dowloading patches, updated to games..they have been failing oh and just now for the second time...SKYPE has disconnected itself giving me a I/O error. So these are all my symptoms and what I've tried. To my knowlege the M4 SSD model doesnt have any kind of software to help aid in determining its health . And is why I am here now typing to you all . Is it time to get a new SSD?? What else can I try? Thanks, Christopher.

Hi cswann821,
Is the system overclocked or with default clocks?
Note that your motherboard has two SATA controllers, Intel Z97 with SATA6G_1-6 red connectors and ASMedia controller also with red connectors SATA6G_E1/2. Are you using Intel or ASMedia controlled port?
What do you mean by 'Secure Clean All', what exactly did you do? It is probably not relevant to former issues but note that some tools do 'overwrite with zeroes'. It is not good for SSDs and works completely different than ATA command 'secure erase'.
Check what SATA port is being used and if it is Intel make sure what driver version is in use. You can check it with Device manager -> IDE ATA/ATAPI Controllers -> right click on the selected controller -> Properties -> Driver tab
To check health of the SSD you can use CrystalDiskInfo. Please post SMART data of the drive - use 'Edit > Copy' option, just please remove drive's serial number.

Can the newer logic boards still read the mac pro 1.1 2.66ghz duo core proc

i just bought a G5 and i am looking to upgrade it. I just bought the 2.66 ghz processors, and I am looking to buy a new logic board and was wondering if i bought a 2009 logic board would it still be compatible with the 2006 processors?

Unlike PCs (that stayed with one Hardware manufacturer year after year, and therefore did not change much of anything for decades) Mac hardware has been allowed to evolve over time. Macs have gone through several different processors from different manufacturers over the years.
It is a tribute to the superior engineering of the Mac Operating System that Apple has been able to extend and migrate Mac OS to accommodate wildly different hardware. Enormous incompatibilities tend not to appear all-at-once.
But change must eventually come. If you fancy running Mac OS X 10.6, it runs only on Intel Processors. The G5 is the last of the Motorola/IBM PowerPC processor series. The first was released about 1994 (PowerPC 601 in the 6100 series) and the last G5 was discontinued about 2006. There are a great number of people still running G4 and G5 Macs, generally using Mac OS X 10.4 and 10.5. There are still a number of fairly vibrant forums on this Hardware and Software.
But if you want to end up with a working Mac Pro, you need to start with a Mac Pro chassis, not a G5 chassis. As Kappy points out the Processors, drives, peripheral interfaces, chassis cut-outs, Power Supply and most importantly Airflow/Cooling (with processor-controlled fans) are completely different, and there is no sensible way to adapt a G5 chassis to intel processors.
Starting with a Mac Pro chassis, the upgrades will only be difficult instead of impossible.

NEW FIX! (PLEASE READ)

Ok so I know a lot of people are going around with a brick iphone. If you have downloaded the new 2.0 software and are getting "connection reset" message heres how I fixed it.
1) Go to the apps part of itunes store.
2) Pick some free app (doesn't matter which)
3) Click on "purchase" or get app
4) It will take you to a page where you can accept the new terms of service.
5) Accept the new terms and download the app
6) You will then see a new app function on your itunes folders
7) Make sure your phone is pluged in. because it should start syncing and activating
8) You may get a msg saying it can't restore or w/e. but just click ok and it restores anyway.
Hope this helps =)

I am currently traveling and using my laptop. Upon arrive home in a few weeks, I will be happy to send you the version and a screen shot showing under MESSAGES and the MARK where the keyboard shortcut is CTRL M and it has been working as such for several years. Now I have answered my own question above, it is now FN R and works fine. And no, I have never created my own keyboard shortcut. I am not smart enough to do same. Please read my own posting, shortly after posting the question.

Neo4-F new build probems, please read/help

I decided to try MSI motherboards again, I bought a Neo4-F.
I have had nothing but trouble since I built the PC with this motherboard.
Hopefully someone can help me.
The problem is that there are too many random BSOD's. Often when there is a BSOD, I loose my USB keyboard, and sometimes the USB mouse. By either installing a PS/2 keyboard or clearing cmos clears the problem.
The FDD works randomly.
I installed the latest bios, all the drivers are the latest.
There appears to be a cold boot issue also, where it will give a BSOD once or more, than run fine for a while.
There are circumstances where installing software, running an anti-virus program or firewall will cause a BSOD also.
Ofcourse there is no overclocking on this unstable motherboard, and most all bios settings are at optimized defaults.
Harrdware is as follows:
MSI Neo4-F, with latest bios.
OCZ Modstream 520 (new)
Kingston Hyperx 3500 2x256 (proven good)
AMD 3200 Winchester w/retail HSF, temps around 35c
WD160JB IDE drive.
I dont want to rip MSI being I am looking for help. But this is my 2nd MSI board, and both have not worked properly. The first was due to a CRC error that was a common problem.
I am an experienced builder, I run a DFI Lanparty with an Opteron that is heavily overclocked on my personal PC.
Is there anything I can try with this board before I return it?

I know it sounds silly but I have had similar issues with an Asus MB. What happened was I was trying to get the heatsink on with a flat-head screwdriver and the side of the heatsink snapped off so my screwdriver went straight into the motherboard . This caused all sorts of errors so maybe trying a new motherboard will solve the issue. Strange thing with the usb mouse issue, never experienced that myself since 98 haha!

C2D Display issues fixed with new Logic board. READ before this is deleted!

While searching on Google for answers regarding logic board problems, I found an interesting MacFixIt article. Unfortunately I'm not sure how many of you read it because I could only access it now through Googles cache.
From the article:
We continue to report on an issue where their MacBook Pro Core 2 Duo (Late 2006) displays flicker or suffer from appearance of horizontal distortion lines. This issue is reminiscent of a problem that plagued some iBook G4s, generally resolved by logic board replacement.
It now appears that Apple is replacing specific parts to remedy this issue, though a parts shortage problem may be causing delays. It also appears that this issue is not directly related to any defect in the display, as that is not the part being replaced in most cases. Instead, the logic board seems to be implicated.
I hope this may be of some assistance to those of you suffering screen problems.
As to this post being removed, well two of my threads regarding my logic board problems (core duo) were removed. Another thread regarding a possible delay in MBP C2D because of screen issues was removed yesterday. So read and reply quickly.
MacBook Pro 15" 2GHz, 2GB, Week 28 (being fixed) Mac OS X (10.4.8) AMD Desktop 2.1GHz, 512MB, WinXP (SP1)

can u explain me what is the MLB? is it the motherboard?
because i have video issue, sometimes i can see horizontal distortion line like you can see at these links:
http://img169.imageshack.us/img169/7888/dsc03013mx3.jpg
http://img175.imageshack.us/img175/7905/dsc03014tf5.jpg
http://img175.imageshack.us/img175/5957/dsc03015qk8.jpg
btw, i clicked on your google cache link but the pix and video were deleted from the site....
do you have any idea what kind of video issue i have?

NEW iPod COMMERCIAL PLEASE READ!

i have a really simple question, what is the name of the artist/song in the new iPod NANO commercial please reply.
thanks

I have a simple answer: "Cubicle" by rinocerose.
charlie

Welcome to the Windows 7 discussion board. Please read before posting.

Welcome to the Windows 7 discussion board.
As above, this is a new discussion board created solely for Windows 7. I am sure many of you would be eagerly anticipating the launch on Oct 22nd. Some of you may already have questions about using existing Creative products on this operating system.
Here are some of the Knowledge Base articles & links that you might find useful:
Windows 7 Introduction
Windows 7 FAQ
Windows 7 - Driver Availability Chart
Microsoft Windows 7 website
Microsoft Technet
Microsoft Developer Network

I can understand your point of view and I respect it in regards to Small Basic being a learning language. None the less, let me make a suggestion that would be more ageeable, I think, to different kinds of people. Why not make different versions
of this new language: version 1 for beginners that I heard would be out by the end of this year,
version 2 for intermediates and version 3 for more advanced programmers. All this would culminate to the Visual Basic language. These 3 versions would smoothe out the gap between SB and Visual Basic. Your new programmers would
evolve at the same time your versions would come out and Microsoft would have a long term policy of loyal programmers.

Sharepoint 2013 Discussion Board Web Part, Subject line link on Home Page does not link to the list view

I am by no means a SharePoint developer, but I really wanted to customize the discussion board for my site - so I found this link: http://www.codeproject.com/Articles/733164/How-to-create-HelpDesk-on-SharePoint-Online
I added the columns, like the article said, and then completed the section "Modification of the discussion board views". I skipped the workflow stuff because while I think it would be useful I wanted to make sure I could get
the actual customization of the discussion board to work first.
My Problem (Just to preface - I followed the above instructions, including disabling the Minimal Download Strategy):
When I clicked into my discussion board list, I was able to get it to look and function as described for both the subject and flat views. However, when I click on the Subject, from the Discussion Board Web Part on my Home Page, it does not redirect into the
Discussion Board List Flat View. Instead, it tries to open the root folder from the Home Page while still using the subject view. The outcome being an empty discussion board on the Home Page.
So I decided to create a whole new discussion board to see if that one would work, when I inserted a new Discussion Board Web Part into the Home Page, newly created from the app menu, it used the same custom JS file(plumTickets), even though I never linked
the discussion board to the JS file. Of course when I went into the newly created Discussion Board list it opened as it does OOTB.
I am so close it having this work like I have been envisioning. I just need users to be able to click on a discussion subject from the Home Page and be redirected to the list view of the parent folder (I think that is the correct terminology,
but it may not be) so they would be able to see any replies and be able to reply. Please Help Me!!!
I truly appreciate any help you are able to provide, thank you!

I figured it out. I was using ?FilterField1=fieldname&FilterValue1=value on the URL to the page to pick out one project number. The web part I was trying to add was for a list that did not have that particular fieldname. I didn't realize that would matter
since I was using the Connections -> Get Filter Values From to get my filter values from the main web part, which does have that fieldname.
I added a field with that fieldname to the other list and set a workflow to copy the lookup value of the project number lookup field into the new field. Now all is working fine. Sorry for the wild geese in my original question.

Sharepoint 2013 discussion board item view (flat.aspx) throws js error after being migrated from moss 2007

After preforming a migration from moss 2007 to 2013 on-prem we have noticed that html tags are showing up in the discussion board posts. I have tracked the problem down to the flat.aspx page throwing a js error.
'SPAnimationUtility' is undefined - coming from the sp.ui.discussions.js file
this is what I see on the page:
The reply and edit buttons function fine. Its just that the html is exposed.
Anyone seen this before or have a clue as to how to solve?
Thanks,
-Alex

As I remember there are a couple managed properties (metadata) that are used by the views that don't get created when you migrate a discussion board from a previous version. I don't remember the specific properties, but take a look at a new discussion
board in 2013 and compare the properties in the views and you will find them.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Discussion Board item not displaying in web part page

Hi, I am using SharePoint 2013 on-premise. I created new Discussion Board name as "Discuss" and displayed in
Management View as shown below.
The list item showing properly without any issues.
But when i am adding this web-part into web part page with Management
view. The items are not displaying.
What is the issue.? How to display the items here.?
Thanks in advance.

Hi Ismaiel,
The Discussion Board is in same site.
If displaying the web-part page with Subject view the items are visible.
But when i am changing the view to Management the items are hidden.

DocIcons displaying incorrectly on Discussion Board web part

We are seeing some odd behaviour when adding an attachment to a Discussion Board post. It looks like the sprite sheet (or DocIcons) are displaying incorrectly. Screenshot below:
Thanks for any help.
Casey

Hi Casey,
I tested the same scenario per your post in my environment, however the image displayed in the subject view of the discussion board list was shown as below:
It is by design that SharePoint uses this image for displaying in the subject view for the discussion board list.
From the image in your post, it seems that the image displayed in your list has been changed by the customization.
Was there any customization on the subject view of the discussion board list?
To narrow the issue scope, I recommend to create a new discussion board list to see if the issue still occurs.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Whoever's going to buy a MSI 945P Neo2-F. Please read!!!

To All whose going to buy this board,
Please read the CPU Support Page for MSI 945P Neo2-F again!
Core: Pentium D (64-bit, Smithfield, Dual Core, FSB533, L2 Cache 2x1MB)
Family Name: Pentium D 805 (2.66GHz)
FSB: 533MHz
Stepping:20
Supported: NO
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=707&kind=1
It has already been stated that the Intel 805D CPU is NOT SUPPORTED and yet I just don't understand why there are still some who wants to try their luck and start pointing fingers for their own mistakes! Even for CPU that are listed under NONE, it is to say that end-users will have to try at their OWN RISK! Please read and research for your own good.

Both ways.
The reason for this thread is to serve as a warning as well as a Pre-Amp for those that wants to run this board with a 805D CPU.
Let us all stop the finger pointing from this point on. No matter how much we trash on, things will still be what they are. Likewise an apple can't turn into a pineapple no matter what though both are fruits.
If everyone does own research well, such will no happen today.

Please make this a good experiance for my first post on any board. READ ME

Hi all. Well first off, let me start by saying that my whole life I've owned PC's. And I'm not hacker Elliet. But I've gotten to know them pretty well. All the way from Windows 3.1 that came out a long time ago (more than 10 years ago)
So after a while of hearing about MAC's I decided to start small and get an iPod (since they are so popular here in NYC) and see what apple was about. Well I really saw that Apple had a great product and started asking about their computers. And did plenty of research. And before the new Intel Macs came out, I was going to get a powerbook. But I had a feeling a new laptop was coming out and waited a lil while and sure enough. The Macbook Pro came out. So I went out and did all my research (as to this being the first real purchase of a Apple product and knew about the possible implications of a new first gen Intel chip in a apple product litterally making history) I knew I might become a new beta tester.
So I started looking on these boards and did 2 weeks worth of hard research to see if the Mac Book Pro (MBP) was for me. And after all the problems i saw (ex: The whine, Right speaker distortion, heat coming from it, white line at bottom of screen, etc) I never saw or read anything about AOL connectivity problems. And I know, I know... alot of you are probably going to gripe and complain about AOL sucking and yada yada yada, but please. Cut me some slack. I actually like AOL. I got on it back in 92 when it came out, and really enjoyed it. And have been on it since. I like chatting on there, and so forth. And I hope you help with my problem instead of telling me to go get "a real ISP" I do have a real ISP, but I like my AOL too.
So now to my problem....
I have a Sony Viao 1.8ghz PC with 512 ram, 80 gig hard drive, 10/100 ethernet port. Connected to a Belkin Router (more info below on specs of router) connected to Opt Online Broadband Cable internet with VoIP. I use my macbook pro on the wireless network at my home.
I got a mac book pro 1.83 ghz running 512 ram on Tiger OSX 10.4.6 I thought that I would wait till a connectivity patch (which I thought would have been 10.4.6) fix the airport problems came out till I posted something. But now that I've tried everything, I'm hoping you open this thread and help me and possibly someone else out there as well. I just d/l'd and installed the 10.4.6 update last night and it did'nt help. So here's more info on my specs. I have a belkin router wireless G 2.4 ghz 54mbs router and I have configured the router with it's firewall, wap2 encryption (as it's the only selection the router has that is available that matches what airport comes with in encryption) I hid my network, and have tried to upgrade the firmware on the router.
Now Here's the real problem. I can connect to AOL on my MBP when I connect the actual ethernet cable to the MBP's Ethernet port (after I have let the cable modem do a hard reset to configure itself to a mac) I can connect to AOL. But when I disconnect the cable and return it to it's normal config, I can't connect to AOL. I can connect to the internet via safari, and firefox, and even AOL's IM on iChat. I can use Itunes all kinds of things. I can even play warcraft 3 wirelessly on battlenet. But connecting to AOL is a pain in the @$$. It's the only proggy I have that won't allow it to connect. I keep getting the error message "Your AOL connection ended because the AOL host was unable to start a new session. Please try to sign on again." Of course All i see for a while is the spinning black and white circle. And it goes through step 1 and 2, goes straight to 6. Then it goes blank, and BAM! That message pops up. And what's so frustrating is that I've tried every possible configuration on AOL, my router and even system preferences, for it to let connect. I even went into system preferences on the mac and went down the the Internet & Network "Sharing" icon and tried 100 possible combinations on that in the services tab, and firewall tab. I've turned them on, off, tried to make exceptions ETC. And no matter how much I play with the personal file sharing and windows sharing advanced settings and sigh every possible combination to make AOL connect via wirelessly. And nothing. I then even tried to fix the connection under AOL in setup. I've gone through and selected TCP Script, Airport Script. Cable Script, And practically every script I can think of. And nothing. I even went on to AOL and downloaded thier alleged fix to wireless accessing AOL. And nothing. I've been searching all over google, AOL's website, and all over these discussion boards and no mention of anyone even having the same problem. But please, someone out there with their infinit knowledge of how Macs run and having more experience than me, Please make this a good experiance for my first post on any board anywhere reguarding a mac. A MBP at that too.
An update to this, But amazingly enough, I actually got it to connect to AOL wirelessly for the first time yest. But I have no Idea how i did it. I tried for 3 hours to reproduce it and no luck. I was accessing my router at it's website config screen and somehow I clicked on connect to AOL and while it was trying to connect to it, i reset the router and BAM, it connected to AOL. And I was in shock. I thought I solved it. Somewhere while it was reseting the router it connected and stayed connected to AOL till I signed off and tried to sign back on to see if I could now connect, and guess what. The same dumb message keeps popping up "Your AOL connection ended because the AOL host was unable to start a new session. Please try to sign on again." And all I did was sign off to test it, thinking I had fixed the problem. I tried for 3 hours like I stated above, and BAM got it connected to AOL wirelessly again (somehow while the router was resetting). And thinking I fixed it, or figured out the trick to getting it to work, signed off... I kissed aol goodbye again. And have been unable to reproduce the "glitch". SIGH Can someone out there please help me?
I think I've made this message as detailed as possible, but please, can someone give me some constructive criticism on how to fix my AOL wireless connectivity problems. Do you know if it's my router? My MBP? AOL software? BTW, I got AOL software version 10.3.7 (Rev 4136.310 US) The latest version I D/L'ed from the AOL website. Anyone know If I should turn on or off some things such as personal fire sharing on, or firewall off or on? ANYTHING. Please. I've put alot of time into writing this post and making it as detailed as possible. And been having this problem for the past 3 weeks that I've had my MBP, and have waited long enough to use my AOL. If you need any further information or suggestions on making AOL work, please let me know. Thank you for taking the time to read all of this, and I really appreciate all of you in the time you take in responding back in trying to help me. I'll be monitoring this post almost hourly. So I hope someone out there can help. Thanks so much again. And help me make this transition to Mac a pleasant one knowing that there is a mac community out there willing to help a new mac client. Again, Many thanks
In Heath and Wealth,
Bruce
Mac Book Pro 1.83 GHZ 512 Ram Mac OS X (10.4.5)

I FIXED IT!
FYI for the rest of you that might be having the same problem. DON'T USE A BELKIN ROUTER WITH AOL ON A MBP!!!!! It ***** wirelessly. or even hard connected, it won't connect. I went to best buy today, and got a refund on the belkin. I then went to J&R and got a D-Link router. And now it works perfect. I can now chat on AOL yet again, and I tried all the other web browsers I have and messengers, and warcraft 3 online via battlenet. And it works great. I want to give you guys a special thanks for taking time out to answer back to my post. FYI! Belkin wireless G routers do not connect you to AOL wirelessly on MBP's. No matter how much you mess around on them. I highly recommend a D-Link Router. They are easy to set up as long as you READ ( AND I MEAN IT!!!) read the instructions before you set anything up on it. Use the CD that it comes with, and you'll be good to go. Set it up and it works great Almost no dead zones in the house, and now I can use the MBP with all it's cababilities. Thanks people. I really appreciate it.
P.S. I called belkin last night when i decided to get a refund on my router for today and when i talked to the tech, after puersuading him to tell me the truth. And stop BS'ing me, he broke down and admited that AOL does not work wirelessly on MBP's. So to make a long story short this time, There you go. And one last note, I'm very happy now with my d-link router. I honestly thought it would suck. Not being a brand name router or anything. But amazingly, it works like a brand name item! Again, many thanks all.
Bruce

Please Read: NI Discussion Forums Maintenance

Hello Everyone,
In my discussions with Lithium (our forum vendor) regarding performance, they have suggested some maintenance on the forums that could help with our community's performance.
The maintenance is to "trim" subscriptions and floats (floated threads and boards) for all users in the community. This means that if you added a message subscription or floated a thread more than 3 months ago, we would remove the subscription and/or float for you. In long-standing communities like ours, users can build up many subscriptions and floats that can affect the performance of the entire community.
In order to keep the floats and subscriptions that are important to you, you just need to unfloat and re-float the thread, or remove and add the message to your subscriptions again because they will then be newer than 3 months.
I must stress that there is no guarantee that this will have a noticeable benefit for performance, but Lithium has recommended that we try this because it has helped other communities in the past.
I would like to perform this maintenance as soon as possible, but I recognize that it is the holiday season and we must give people adequate notice to take any action they find necessary. Therefore, we will do this maintenance the week of January 7th, specifically either Tuesday January 8th or Thursday January 10th. I will post the specific day after the new year.
Please post any questions or concerns you have to this thread on the Feedback board.
Regards,
Laura
Web Support & Operations
National Instruments
Message Edited by Laura F. on 12-21-2007 11:00 AM

I offer an alternative:
RSS
For the heavy subscription users this is might be drastic shift in workflow, but as LabVIEW users we are used to that.
In my RSS reader (newsfox for Firefox) I have a group called 'discussions' where I have feeds from discussions I'm interested in.
Every thread has it's own RSS feed so you easily follow them.
Besided Discussions I also have trackers feeded through RSS.
Ton
PS This was only stickied to the LabVIEW forum, DIADem users don't use stickies?
PPS Most RSS readers check every thread regurarly, might this be the cause of the slow down now RSS is gaining momentum?
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

New Discussion Boards - Please Read

Similar Messages

Maybe you are looking for