NEW iPod COMMERCIAL PLEASE READ!

i have a really simple question, what is the name of the artist/song in the new iPod NANO commercial please reply.
thanks

I have a simple answer: "Cubicle" by rinocerose.
charlie

Similar Messages

HT1695 I know nothing about how to use my new ipod and when reading the little bit of information in the folder that came with it, all I can do is turn it on, but it just powers down after a few seconds. How do I work this thing?

I know nothing about how to use my new ipod and when reading the little information that came with it, all I can do is turn it on. Then in a few seconds it goes black, never having brought up a screen to do anything! Help! What do I do to get this thing going?

You might consider connecting it to the charger and charging up the battery overnight.
Please Get the iPod Touch User Manual for iOS 5

New ipod touch cant read wifi

Just got a new iPod touch for my daughter. Have connected to Wifi as I do via my iPhone but it is unable to read the Wifi connection even though the Wifi symbol is shown.
My Iphone seems to have a problem too however other devices in the house can connect no problem to the same Wifi.
Has my Wifi become apple phobic ?
Any suggestions.
Thanks
Colin

Does the iPod connect to other networks?
Does the iPod see the network?
Any error messages?
Do other devices now connect?
Did the iPod connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Is it time for a new SSD? Please read my story, my battle with my M4 Crucial SSD

This is whats been happening the past couple of days and what I have been doing to try and isolate what is causing my fresh win7 install to have so many issues running. IMO, i've narrowed it down to be an issue with my SSD, and not my RAM. Please read, and advise. So I changed out my p8z68 MB and ivy bridge CPU for a new maximus VII hero and Devils Canyon Haswell cpu. After installing windows I noticed it was running sluggish and would not install updates successfully or without crashing.Over 3 attempts of reinstalling win7 64bit. The build kept crashing, failed to fix windows startup, MBR error 01 or getting the BSOD. I firt tested my RAM... I ran memtest86 with 100% pass and found and isolated that 1 of the 4 x4gb of my Black Vengeance Corsair ram had errors on it (ram is 3 years old in use). I ended up taking those out and replacing with brand new 2 x 4gb Gskill sniper sticks I had still in packaging. I re-ran Memtest86 on the new RAM just to be sure and ....no errors. I want to emphasise that by now I've reinstalled window 3 times on this build upgrade....noticing a lot of lag, in windows after fresh install . Especially when opening programs like windows update windows as well as other things like, device manager or even a Web browser. If I have more than one window open. My hard SSD LED on my front panel, lights up like it's busy, browser and programs freeze or I get a program "not responding" error, on top until I wait it out...then it disapears. Finally I did another OS install..this time and after much research, I made sure to run a Secure Clean All, on my Crucial M4 SSD (it too has been used for the past 3 year). I had already updated its firmware to 070H a long time ago. I also made sure I had the most current Intel, SATA, VGA, LAN, and sound drivers were downloaded. Durring Windows update it reached 140 of 149 updates before receiving a BSOD again even with the new ram! After Reboot... I went in and this time before running Windows update...again, I made sure all my services were closed and did a "CLEAN" Boot to windows. Doing this finally made my system able to dowload all the updates successfuly. Ok so now that Win7 is fully updated, I got my antivirus ..norton on. More updates, with little issue. But I still notice while my SSD is writing, I say thats what its doing when my computers fornt panel LED is flashing, that the program / software/ game im installing freezes, until it has a chance to "Catch up" , Or install fails, or for instance dowloading patches, updated to games..they have been failing oh and just now for the second time...SKYPE has disconnected itself giving me a I/O error. So these are all my symptoms and what I've tried. To my knowlege the M4 SSD model doesnt have any kind of software to help aid in determining its health . And is why I am here now typing to you all . Is it time to get a new SSD?? What else can I try? Thanks, Christopher.

Hi cswann821,
Is the system overclocked or with default clocks?
Note that your motherboard has two SATA controllers, Intel Z97 with SATA6G_1-6 red connectors and ASMedia controller also with red connectors SATA6G_E1/2. Are you using Intel or ASMedia controlled port?
What do you mean by 'Secure Clean All', what exactly did you do? It is probably not relevant to former issues but note that some tools do 'overwrite with zeroes'. It is not good for SSDs and works completely different than ATA command 'secure erase'.
Check what SATA port is being used and if it is Intel make sure what driver version is in use. You can check it with Device manager -> IDE ATA/ATAPI Controllers -> right click on the selected controller -> Properties -> Driver tab
To check health of the SSD you can use CrystalDiskInfo. Please post SMART data of the drive - use 'Edit > Copy' option, just please remove drive's serial number.

NEW FIX! (PLEASE READ)

Ok so I know a lot of people are going around with a brick iphone. If you have downloaded the new 2.0 software and are getting "connection reset" message heres how I fixed it.
1) Go to the apps part of itunes store.
2) Pick some free app (doesn't matter which)
3) Click on "purchase" or get app
4) It will take you to a page where you can accept the new terms of service.
5) Accept the new terms and download the app
6) You will then see a new app function on your itunes folders
7) Make sure your phone is pluged in. because it should start syncing and activating
8) You may get a msg saying it can't restore or w/e. but just click ok and it restores anyway.
Hope this helps =)

I am currently traveling and using my laptop. Upon arrive home in a few weeks, I will be happy to send you the version and a screen shot showing under MESSAGES and the MARK where the keyboard shortcut is CTRL M and it has been working as such for several years. Now I have answered my own question above, it is now FN R and works fine. And no, I have never created my own keyboard shortcut. I am not smart enough to do same. Please read my own posting, shortly after posting the question.

IPOD TROUBLE PLEASE READ ASAP

hey everyone I just recently bought me a new ipod and I dont know how to put movies on it, I have a dvd in my computer right now but I dont know how to convert it from the disk to my computer and than to my ipod someone please help thank you!

ok i downloaded it and its installed now i put my movie "Friday Night Lights" into the computer how do i get the movie into videora because im not seeing anything to import it with, please be specific

Trouble With Putting Music on New Ipod Nano PLEASE HELP

I Have had my new ipod nano now since christmas and i still havnt figuered out how to put music on it.
When i try to download the new Itunes of apple, it says that it cannt complete downloading because i do not have the priviliges even though i am on the administrators account. If i go on my old itunes my new ipod does not apear on the left for me to put music on, Any Suggestions ?? Please!:)
Message was edited by: Dee123

Hello and Welcome to Apple Discussions.
Try using a USB2 port. If you are already using a USB2 port disconnect any USB1 devices on that port (i.e. if it's got a hub on it).
Merry Christmas
mrtotes

Just got my brand new ipod touch please help

I just go my 3rd generation ipod touch and when I try to turn it on there is a usb and a itunes cd with a music note on it please help.

Welcome to the discussions.
It sounds like [this is the screen|http://support.apple.com/kb/TS1275] you are seeing. I think that will help guide you through what to do.

I have an iPod nano v4 or 5 and when I connect it to my Hyundai Santa Fe I get an iPod loading error message. The cable came with the car when I purchased it and the dealer was able to get it to work with his newer ipod. Please advise.

I have an iPod Nano v4 or 5 and when I connect it to my Hyundai Santa Fe I get an iPod Loading error message. The cable works with the dealer's iPod which is a newer model. The cable came with the car when I purchased it. Please advise. Thanks.

Hi Bander Bunny!
I have a couple of articles that should be able to help you troubleshoot this issue a little further. You may want to try uninstalling and reinstalling iTunes first. This has to be done in a specific manner, and this article can help you do that:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/ht1923
Another option is that you may want to try syncing your iPod nano manually. Here's is an article that pertains to manually managing the content of your iPod nano:
Managing content manually on iPhone, iPad, and iPod
http://support.apple.com/kb/ht1535
It's also possible that this issue resides with your iPod nano. Here is a website that will help you troubleshoot the iPod nano:
Apple - Support - iPod Troubleshooting Assistants
http://www.apple.com/support/ipod/five_rs/
Thanks for using the Apple Support Communities. Have a good one!
-Braden

Some queries about my new ipod! PLEASE HELP!

hey guys,
before you say, i have searched the forums far and wide, and am not satisfied with what i've found, so that's why i am posting these questions! lol.
anyway, here they are; please help if you're in the know!
(1) I notice that i can feel the disk in the iPod spinning almost the whole time while watching videos. it is not a very loud noise, but it is enough to hear it slightly, and to feel vibrations. is this normal?
(2) I notice that after watching short videos, the battery life plummets, only to regain when listening to music. i take it this is just an inaccuracy with the meter, and is normal?
(3) just out of interest, how long can you run your ipod (a) playing songs, and (b) playing videos? i have a 30GB and i would be interested in comparing to others.
also, is the BTI external battery II a good option for when i need to watch vids for longer? are there any negative side-effects to the iPod because of it?
thanks alot,
oli.

Let's see:
1. What you're hearing/feeling is the hard disk spinning. It's normal. Moving video takes a lot more than moving music, so to stream it out means the disk has to keep spinning. A song file can be moved to the iPod's memory buffer and played from there, using a lot less disk action.
2. The battery estimate is switching to reflect the current task. When you watch videos, it estimates how much time you have left to watch them, and when you go to music, it adjusts the estimate back.
3. I haven't had the iPod video long enough to get an idea of how long the battery lasts for music and video, but it hasn't let me down yet. I hook it up to my Mac each night and run it through the day, and it hasn't ran all the way down during normal use. I haven't run too many videos through it yet, but short films didn't drain it.
I have a Belkin external battery pack that should work well during a 8-hour trip later this month. Estimates like 6 hours of video use, but it takes AA batteries, so an extra set of batteries is all I need. Doesn't harm or affect the iPod, but it bypasses the internal battery system, so you can't charge the iPod from it.
The BTI rechargeable battery should give you more play time, and may charge the iPod as well, but you can't stick batteries from anywhere in it.
Hope that helps,
Richard
30GB ipod video black Mac OS X (10.4.3)

Major ipod trouble please read!!!

my ipod video 5th gen does not show up in itunes or windows and does not charge even though i've replaced the old battery with a brand new one. I've looked everywhere on the internet for help but can't seem to find anything. please help me if you can.

ok i downloaded it and its installed now i put my movie "Friday Night Lights" into the computer how do i get the movie into videora because im not seeing anything to import it with, please be specific

New Ipod user, please help

Hello everyone, i recently got a 30gb ipod video and i am really enjoying it. although the video portion is kind of odd. Podcasts are no problem, but when it comes to dvd's or just movies stored on my computer there seems to be a lot to choose from. I am running a windows machine but i am not sure as to what to use, sorry about the post(i know there is a lot). but i am looking for a good program to convert dvd's for use on my ipod. I dont know what to trust on here. Could someone please help me with what they use for windows. any help is appreciated, thanks

I have a windows system as well. I use two programs that work quite well and are free. First to get them (dvd's) on my computer I use decrypter. It works great, then I convert it with streamclip. It is a very good program that has worked well for me. I have converted a ton of dvd's and it has worked well. You can get it here http://www.squared5.com/svideo/mpeg-streamclip-win.html
Like I said it is free.
There are a lot of great programs out there and most work well.
I will leave you with one bit of advice, there is a Spammer that goes under several different names and is pushing a program called cucosoft. I would not use it just because the person goes under like 8 different names pushing this program. It is not free and he must be in the envolved with the company in some way shape or form. Right now he uses cindyzz or meggicc or collins... any many other names... so beware

Ipod takes forever, replacement ipod? please read

My ipod takes the LONGEST time to update songs from itunes to my ipod mini. It took at least an hour to put 50 songs on my ipod, compared to its usual time at about 2-3 minutes. Also, my ipod says on itunes when i drag the songs to put on the ipod, it says, "updating ipod, do not disconnect" but it doesn't put the songs on the ipod. I've had so many problems with this ipod, if I send it back will they give me a mini ((even though they're not made anymore)) or will they replace it with a nano or a regular ipod?
thanks!

i really have no clue what USB i have. previous problems made me create a new "drive" for the ipod. i have had so many problems with this ipod. earlier today, i was in the car when realized that for the 3rd time, my entire ipod was once again deleted. I just tried putting new songs on the ipod and got an error. I'm getting very sick of this and am definately sending the ipod back. Question, my name is on the back of the ipod -- will they still send me a new one? thanks

Neo4-F new build probems, please read/help

I decided to try MSI motherboards again, I bought a Neo4-F.
I have had nothing but trouble since I built the PC with this motherboard.
Hopefully someone can help me.
The problem is that there are too many random BSOD's. Often when there is a BSOD, I loose my USB keyboard, and sometimes the USB mouse. By either installing a PS/2 keyboard or clearing cmos clears the problem.
The FDD works randomly.
I installed the latest bios, all the drivers are the latest.
There appears to be a cold boot issue also, where it will give a BSOD once or more, than run fine for a while.
There are circumstances where installing software, running an anti-virus program or firewall will cause a BSOD also.
Ofcourse there is no overclocking on this unstable motherboard, and most all bios settings are at optimized defaults.
Harrdware is as follows:
MSI Neo4-F, with latest bios.
OCZ Modstream 520 (new)
Kingston Hyperx 3500 2x256 (proven good)
AMD 3200 Winchester w/retail HSF, temps around 35c
WD160JB IDE drive.
I dont want to rip MSI being I am looking for help. But this is my 2nd MSI board, and both have not worked properly. The first was due to a CRC error that was a common problem.
I am an experienced builder, I run a DFI Lanparty with an Opteron that is heavily overclocked on my personal PC.
Is there anything I can try with this board before I return it?

I know it sounds silly but I have had similar issues with an Asus MB. What happened was I was trying to get the heatsink on with a flat-head screwdriver and the side of the heatsink snapped off so my screwdriver went straight into the motherboard . This caused all sorts of errors so maybe trying a new motherboard will solve the issue. Strange thing with the usb mouse issue, never experienced that myself since 98 haha!

New Discussion Boards - Please Read

This board has been created to host discussions regarding K, S and Vibe Series Lenovo Smartphones, all threads have been moved from the old board and that board has been closed.
There were quite a number of threads which had no phone type in the subject line or content of the thread. If you are unable to find a thread you have previously contributed to you might like to follow the method suggested in the following KB article;
http://forums.lenovo.com/t5/Forum-Housekeeping-Knowledge/How-do-I-find-messages-I-have-posted/ta-p/6...
Andy
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество

I have a simple answer: "Cubicle" by rinocerose.
charlie

NEW iPod COMMERCIAL PLEASE READ!

Similar Messages

Maybe you are looking for