New Edge Device (672) Addition in Existing Infra.

Hi All.
I have WAAS infra running with CM-612 and Edge-512 running on WCCP v2.
I want to add one more device for a location in existing infra of WAAS.Need steps to add this new device what configuration will be required.
Another question i have i added so many users with admin rights but when i give show run command on CM i am not able to see all of them.
I also want to know show run and show start only shows me some configuration like tacacs ,interface,mode of device and local user DB.
how to take backup of whatever the configuration is on WAAS box like profile in case if it dies how to restore in working condition.
Thanks in Advance for Help.
Ajay

Hi Ajay,
If you want to add one more wae device for wccp redirection,following documentation links will assist answer the question.In short its the same set of steps that you did to configure wccp for your edge device
http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v431/configuration/guide/traffic.html#wp1041613
To view user accounts from CM click on My WAN > Manage Devices and click the Edit icon next to the device for which you want to view users. Then click Device Users or CM Users, depending on whether the device is an application accelerator or a Central Manager. The Users for device window displays all the user accounts defined for the device.
If the the above CM gui is showing you the users then even the cli should show the same users.When you type sh run | i username command you should see all the the users that you see on the CM gui under the CM device CM users.
More information on user accounts you can get from
http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v431/configuration/guide/usrmgmt.html#wp1042548
One the CM wae device in the gui and cli you should see all the users created from MY WAN--Admin---AAA---Users section.On the Application Accelerators wae's you will only see the users that have roles assigned to them.
Following link explains the Back-up procedure for CM and wae devices
http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v431/configuration/guide/maint.html#wp1113704
Hope the above information helps
Regards
-Smita

Similar Messages

I have a device that shows up in my airplay device list on my iMac, and my phone. This device does not exist. How do I get it out of the list? I would like to drop it before I add new airplay devices to my network.

I have a device that shows up in my airplay device list in iTunes, and on my iPhone that does not exist. How do I delete it? I have OS X 10.10.1 on my iMac, and iOS 8.1.2 on my iPhone 5. I would like to get it out before I add new airplay devices to my network.

I called Apple tech support. The device turns out to be a WiFi extender. I never would have guessed that the extender would show up on the list since I wouldn't think of it as an airplay device, and in the list, it shows a little speaker icon. In the process of talking with Apple, I gained a greater understanding of how airplay works.
It turns out that there is no stored list of devices in a file on the mac, or anywhere else. I have seen a lot of traffic on the web from people trying to modify this list, but there isn't one. iTunes, and other devices simply poll the network for airplay devices from time to time.
Have a very happy holiday!
I would like to get rid of "just give me the aster, and stop wasting my time", and replace it with my name. The Apple tech support guy never saw that before. Just my luck.

Why in September when I purchased a through the Edge program with the $5.00 insurance/protection plan (that the sales associate handling the purchase on the phone recommended), is no longer valid?! 2 months after getting the Edge device, I go to make a c

Where is the insurance and original Edge Agreement from September? No one in Verizon knows. I purchased (rented) a Galaxy S4 through the Edge program, with the $5.00 insurance/protection plan (that the sales associate handling the purchase on the phone recommended),which is no longer valid! 2 months after getting the Edge device, I go to make a claim and Asurion will not honor it because I am not covered; however, all the order confirmation receipts emailed and physically sent with the device show the addition of insurance when I signed up for the Edge program. According to Verizon (via live chat with 'Nicole'), this $5 protection plan no longer exists and the order numbers I have on my paperwork (multiple documents) are invalid in the Verizon system. For over a week, I have spent more than 10 hours on the phone, live chat and in the store trying to get some sort of resolution and the customer service reps just put me on hold or promise to "call me back within 30 minutes after they speak to a supervisor" and (surprise!) they never return my call. Or they send me to the store to show proof of my documents, but then those associates cannot help either. Also, the 'Edge Agreement' in my profile has the wrong device (and serial #), wrong payment amounts and no mention of the 'consumer protection plan' on it, which is listed on the order confirmation sent via email and with the actual Edge device on September 23. Obviously, there was some sort of glitch or mistake on Verizon's part, but NO ONE WILL EVEN TRY TO ACCEPT THAT FACT! WHY WON'T ANYONE GET BACK TO ME WITH SOME SORT OF EXPLANATION FOR ANY OF THIS?! Is it typical for Verizon to do away with a service (i.e., $5.00/month protection) and not inform the customer of this? And is it company policy to be as unhelpful as possible to a paying customer who needs assistance when there is cleary something wrong on your end? And finally, am I really suppose to believe that Verizon customer service has no email addresses or fax machines so a customer can send you proof of what is on the receipt you sent and that I have to take more of my time to go to the actual store?! Finally, does anyone at Verizon even read these messages or even give a F@#k about the customer as long as they keep making money?!

RLites22,
I can understand your concern about the insurance you have on the line. I want to make sure that I put a fresh pair of eyes on your account to find out exactly what is going on. I did send you a Direct Message. Can you please respond back to me in the direct message so we can go over the account specifics. I really hope to hear back from you soon.
KevinR_VZW
Follow us on Twitter @VZWSupport

Msg: You've connected a new Blackberry device, it's been initializing device for over 1 hour

I had Blackberry Desktop Manager Ver 5.x installed. I downloaded the BlackBerry Desktop Software v6.1 software from the link saying that this download was to upgrade existing desktop manager. The installation completed without issues. After starting Version 6.1 for the first time and being asked to connect a blackberry device, I connected my brand new Blackberry Bold 9930. A new window opened that said "You've connected a new BlackBerry device" "Initializing device", and it's been hanging like that for nearly 2 hours. The main window shows the Blackberry correctly seen by model, type and pin and as never synced and never backed up. Any help would be greatly appreciated. Thanks, Bruce

Although this is advertised as an upgrade to Desktop Manager 5.x, it is really a replacement. It does not upgrade anything, but merely installs the new one. So the first thing you may want to make sure of is whether the old version is still on the computer. Go to your Control Panel on your computer and click Programs and Features. If you see any other BlackBerry Desktop Sfotware version beside the 6.1 then uninstall it. This other version could still be attempting to communicate with your device, causing this issue to occur. Make sure you reboot your computer after this is done. let me know if this helps or if you need any more help.

Unable to use Internet Connect with my new wireless device

I just received a new wireless device for my macbook pro. Normally I sign on with Internet Connect, but after setting up the new card, I can only connect using Verizon Manager, which usually doesn't give me good connection, I don't know why.
I called the Verizon people, they mostly are clueless as to how I was able to sign on using both Internet Connect and Verizon Manager before with my old card. I remember there's a way of setting up manually if you want to use Internet Connect. Problem is, when I went to Systems Preferences and clicked on Network, a pop up prompt saying "your network setting have been changed by another application" keeps popping up even as I keep closing it. ***?!!! How can I get rid of it so I can change network setting manually?
I just want the option of connecting with Internet Connect with my new wireless device. BTW, when I try connecting with it using my old setting National access/ Broadband access , I get a message saying "the selected communication device does not exist".

"I just received a new wireless device"
If not from Verizon, then who? Did it come w/a manual? If not, have you contacted the vendor/manufacturer for instructions?
==========
"A Fix for "Your network preferences have been changed by another application" Error
In the Library/Preferences/SystemConfiguration/ folder delete the following:
com.apple.airport.preferences.plist
NetworkInterfaces.plist
preferences.plist
com.apple.nat.plist
You will have to re-configure all your network settings since deleting"
!http://i50.tinypic.com/izvwo1.gif!

HT201303 I forgot the security answers for my App Store account and I can't download any apps on my new apple device

I can't download any apps on my new i device because I forgot the security question answers. How to I get the answers back? Help plz

Reset Security Questions
Frequently asked questions about Apple ID
Manage My Apple ID
Or you can email iTunes Support at iTunes Store Support.
If all else fails:
1. Go to: Apple Express Lane;
2. Under Product Categories choose iTunes;
3. Then choose iTunes Store;
4. Then choose Account Management;
5. Now choose iTunes Store Security and answer the bullet questions, then click
      Continue;
6. Sign in with your Apple ID and press Continue;
7. Under Contact Options fill out the information and advise iTunes that you would
      like your security/challenge questions reset;
8. Click Send/Continue.
You should get a response within 24 hours by email.
In the event you are unsuccessful then contact AppleCare - Contacting Apple for support and service.
Another user had success doing the following:
I got some help from an apple assistant on the phone. It is kind of round about way to get in.
Here is what he said to do and it is working for me...
a. on the device that is asking you for the security questions go to "settings", > "store" >
      tap the Apple ID and choose view"Apple ID" and sign in.
b. Tap on payment information and add a credit/debit card of your preference then select
      "done", in the upper right corner
c. sign out and back into iTunes on the device by going to "settings"> "store" > tap the
      Apple ID and choose "sign-out" > Tap "sign -in" > "use existing Apple ID" and you
      should be asked to verify your security code for the credit /debit card and NOT the
      security questions.
d. At this time you can remove the card by going back in to edit the payment info and
      selecting "none" as the card type then saving the changes by selecting "done". You
      should now be able to use your iTunes store credit without answering the security
      questions.
It's working for me ...I just have to put in my 3 digit security pin from the credit card I am using.
Good Luck friends!

I have recently started using an old Nano and purchased some new songs. When I go to sync it wants to erase other songs to download new. Is there a way to just sync new songs to ipod without erasing existing music on devise?

I have recently started using an old Nano and purchased some new songs. When I go to sync it wants to erase other songs to download new. Is there a way to just sync new songs to ipod without erasing existing music on devise?

Syncing shouldn't trouch you photos unless you have photos in a Photo Library album. These would be photos that were synced to your phone from your computer. If you do have any, you'll need to use an app like PhotoSync to transfer them to your computer prior to syncing.
If you prefer to backup your camera roll photos prior to syncing, open iTunes and go to Preferences>Devices and check "Prevent...from syncing automatically". Then connect your phone to your computer and import them as explained here: http://support.apple.com/kb/HT4083.
Then, to minimize data loss, follow the steps in this user tip: https://discussions.apple.com/docs/DOC-3141. To follow the steps, first open iTunes and go to View>Show Sidebar. Also, Transfer Purchases is now located in File>Devices.

Why can I only order 1 EDGE device when browsing online?

Several EDGE plan / share MORE plan questions from potential customer:
1. Why can I only order 1 EDGE device online when browsing options?
2. I have a large family, especially now that my mother is suddenly unable to live alone. How many total lines and how many EDGE phones are allowed on one plan?
3. Since my mother already has a VZW iphone4, can I add her to the plan at $15 for her line if I buy 10G or more data?
My family has a hodgepodge of plans, since VZW was too expensive compared to other options in the past and some of the older ones have had smart phones longer than others, etc. Ultimately I am trying to find out if I can add 5 EDGE devices, plus one already owned device at the $15 rate for that line, as long as I have 10+ GB of data (probably looking at 12 to be safe).
Is this possible? And can I order online? It's really difficult to make it to a store during hours right now.
Thanks in advance for any assistance!
Message was edited by: Colin Blaber

Thank you both for your help. I have a few follow-up questions for the best path forward if I switch to Verizon for all of our lines--quite a few phones to order and numbers to port form various carriers (StraightTalk, T-mobile prepaid, ATT).
-Can I order the first EDGE phone online, creating my account and porting my number, then wait two days (so that I have received and activated my new phone), then add the next line / EDGE phone / port number, and continue in that fashion?
If not, can I go in person and order multiple phone lines / ports to the EDGE program on the share more everything plan at the same time?
Or,
Can I do a combination--go in person to add my first four lines, then add the others individually online? Is there a time requirement between changes?
Thank you again.

Is there some up-to-date BB-authorized page that tells you exactly where you can officially purchase a new BB device?

Good evening Device Support Forum.
I am trying to purchase a Q5 from an authorized carrier in Canada (ON, Canada). I don't have 5 years to devote to trying to correlate where I can buy the BB device that I want.
I tried hitting up: http://ca.blackberry.com/smartphones however the information is sadly not up-to-date.
This is my third attempt at trying to purchase a BlackBerry. It's getting tedious.
My question: (same as the Subject line) is:
Q> Is there some url that tells me exactly where I can officially purchase a new BB device?
1. I don't want a refurbished BlackBerry device that is being pawned off as a new BlackBerry device where I am asked to pay the price of a new BlackBerry device.
2. I don't want a BlackBerry device that does not come with a service warranty.
3. I do want a fresh BlackBerry device that comes with a carrier service warranty.
I would have liked to purchase a Q5 - it seems an impossible task since an official device doesn't seem to exist here in Ontario.
Note: Choosing the Q5 only because it is lighter to hold.
Before anyone suggests:
- I would have preferred the BB Classic but it's not possible to try one here.
- The Z30 is too heavy.
- Tried the Passport and it's heavy and too complex to navigate.
Upfront thanks for your time and any leads,
TreenaL

Here is my view. You always start with the carrier. What is best for you where you live, work, and play?
If you are set on buying the device from the carrier, then hopefully they sell BlackBerry, and sell the model you want. That was no longer the case for me, which led me to buy unlocked, unbranded (from Shop BlackBerry).
It doesn't take a huge investment in time to figure out what models (or sub-models) will work on your carrier. Google is your friend. Someone, in fact several people will have already done this for you.
As far as warranty, in almost all instances with Blackberry the warranty is handled by the seller. See http://supportforums.blackberry.com/t5/Welcome-Introductions/How-Formal-Support-Works/td-p/2540533
- Ira

If I wanted to exchange my iPhone 5 for the new iPhone 6 (no additional cost after $199 gift card from selling iPhone 5) do I have to pre-order online or do I just have to show up at a Verizon store Sept 19th?

If I wanted to exchange my iPhone 5 for the new iPhone 6 (no additional cost after $199 gift card from selling iPhone 5) can I pre-order online now or do I just have to show up at a Verizon store Sept 19th?

scodaddy, that is a wonderful question. We are super excited about the new iPhone. You can always pre-order your new iPhone online and then start the mail in rebate by following this link: http://bit.ly/GGnDDC Or you can always go into the store location and do it all in store on the 19th when the phone is launched. That would depend on if the store has them in stock when you go in. I hope that this was able to address your concern.
KevinR_VZW
Follow us on Twitter @VZWSupport

SOLVED: Mounting IDE ZIP Drives, "Special Device hdb4 Does Not Exist"

I thought I would post a follow-up, since I have finally resolved this long standing issue, which has plagued me since my first days with Linux many years ago.
As outlined in my original post below, every time I would attempt to access a Zip disk for the first time since boot, Linux (pretty much all distros I have ever tried, with the exception of SuSE 9.3) would fail to mount the disk and report back that "Special device hdb4 does not exist". Of course the "hdb4" part varies from distro to distro and machine to machine, depending on how your Zip disk is connected and how the distro names its disks, but the basic error has been constant. I have always worked around it by redoing the mount command specifying just the device, not the partition, and while that would always fail, it would force the creation of the device /dev/hdb4, and I could carry on. Annoying but effective.
FINALLY, a long term answer. I got my inspiration from a really snarky post I read in another online forum where someone had posted this very same question (this is a very common problem with no common answer it seems!). The respondant, who completely failed to provide a helpful answer, basically said "listen, the OS is telling you what is wrong - the device hdb4 doesn't exist - so fix it, and all will be just fine". Of course, the respondant didn't even bother to offer a suggestion about HOW to fix it.
However, therein lies the inspiration for the solution. Indeed they are right, /dev/hdb4 *doesn't* exist, so how to fix that? They had a point. I started researching the mysteries of mknod, a program that can create /dev files, and the even deeper mysteries of Linux device numbers, both major and minor.
In the end, I found a wonderfully informative document that described the current standard for the device numbering scheme used by mknod, and Linux in general. The key things of interest are this:
1/ The major number for IDE based drives is 3.
2/ IDE allows for 64 partitions per device, so the minor numbers are 0-63 for device "a", 64-127 for device "b" and so on. You derive the minor number of interest for your particular device by taking the starting value of the minor number range of interest for your device and adding the partition number to it. So, for example, hdb4 would have a minor number of 64 (the start of the minor number range for device "b") plus 4 (the partition number in "hdb4"), yielding a result of 68.
3/ The major number for SCSI based drives, or those that your OS treats as SCSI, is 8.
4/ SCSI allows for 16 partitions per device, so the minor numbers are 0-15 for device "a", 16-31 for device "b" and so on. You derive the minor number of interest for your particular device by taking the starting value of the minor number range of interest for your device and adding the partition number to it. So, for example, sdb4 would have a minor number of 16 (the start of the minor number range for device "b") plus 4 (the partition number in "hdb4"), yielding a result of 20.
In my case, Arch seems to be treating all of my disk based devices as SCSI, perhaps because I do have a real SCSI interfaced Jaz drive in my machine. So, the Zip disk of interest in my machine is sdc4 (my real SCSI jaz is sda, my Arch root is sdb, and the IDE Zip is sdc). Applying the above, for /dev/sdc4:
- The major number is 8.
- The minor number is 32 (start of range for device "c") plus 4 (the partition number) = 36.
Armed with this knowledge, I su'd to root and entered:
# mknod /dev/sdc4 b 8 36
and like magic, there is was, /dev/sdc4. I popped a disk into the drive and my first attempt to access it was greeted with success, not the usual "device does not exist" error! By the way, the "b" in the above command is just part of the mknod syntax, and indicates that I am creating a block device (vs. a character device, or some other type of device - disk drives all seem to be "block" devices for apparent reasons).
SO, determine your major number by device type (it will usually be 3 or 8), compute your minor number by device letter and partition number, and add a mknod command to your system startup (so you don't have to do it manually every time) and you are done! No more annoying "device does not exist" errors.
Now for the kicker. It turns out that this information has been available under my nose all along. I just didn't recognize the code. If you do the following:
# ls -ald /dev/sd*
Linux obligingly provides you with the major number and the start of the minor number range for your device. Since Linux has always detected the Zip *device* (just not the partition) this is really all you need to know. When I issue the above command, I get an output like:
brw-rw---- 1 root disk 8, 32 date time /dev/sdc
Guess what, there they are! "8" is the major number of interest, "32" is the start of the minor number range of interest. If I had just recognized that, and known that all I had to do was add the partition number to the minor number to get the magic number to feed into mknod, things would have been easier.
Sorry for the long post, but like so many things in Linux, the OS doesn't make this easy on the uninitiated. I sincerely hope that this post may help lots of other people to resolve this vexing and longstanding problem.

Solved!
See the lengthy response in this post:
http://bbs.archlinux.org/viewtopic.php?id=36468
I posted the solution separately, with the most informative title I could come up with, so that others Googling this topic on the web may hopefully easily find it.

I get a message that says ff is already running but is not responding ,to open a new window, you must close the existing ff process or restart your system, how do i close the existing ff process?

I have windows 7 on dell laptop. I am working on a Word Document and want to go to a diff window for some information. I click on the FF icon on my desktop and get a message that says...FF is already running but is not responding. To open a new window, you must close the existing ff process or restart your system..how do you close the existing ff process?
== This happened ==
Every time Firefox opened
== I got my new dell laptop four weeks ago with window 7 installed

See https://support.mozilla.com/en-US/kb/Firefox+is+already+running+but+is+not+responding

I just wanna buy a new iOS device and I'm confused between the iPod touch 5th generation, iPhone 4s 8GB, iPad 4th generation 16GB and iPad mini with the retina display 16GB model. Please help me figure out.

I have an iPhone 4s 16GB Model and I've been using it for about more than an year now. The reason I wanna get a new iOS device is because my 4s has got lots of scratches now and it's ambient light sensor seems not to work properly. Apparently, another reason is that the iLife and iWork suit are not free for me as my device is older and new devices get those softwares for free.
I thought to go with a new iPhone 4s again but the problem is that new 4s come with only 8GB of storage and they don't support AirDrop. So next, I thought to go with an iPod touch 5th gen because of its jaw-dropping design, bigger screen, more storage and AirDrop support. Because iPod touch is phone-less iPhone and they come at affordable price, I can also buy any cheap cell phone like moto e to replace my current iPhone 4S.
Another options that I thought a little bit on, is iPad 4th Gen and iPad mini with Retina display 16GB.
Now, should I just stick with my current 16GB iPhone 4s, or get a new one.
Or should I buy an iPod touch 5th gen and moto e (since iPod can't make phone calls)
Or should I go with one of the two iPad models that I aforementioned.
Awaiting your valuable suggestions.
Thank you!

Found one on best buy
http://www.bestbuy.com/site/Belkin+-+Grip+Neon+Glo+Case+for+Apple%26%23174%3B+iP od%26%23174%3B+touch+5th+Generation+-+Pink/1331013.p?id=1219050712926&skuId=1331 013
by Belkin, so a place to start.
They're a lot more expensive, but Griffin has some of their 'survivor' cases with sealed ports, so you could cover up the ones you don't need.
If best buy isn't an option for you, at least there's a manufacturer to look for.

HT201272 How can I recover a purchased app on one itouch (which has since died) and put it on my new itouch device if I haven't syncronised my old device with my mac/itunes account before it died?

How can I recover a purchased app on one itouch (which has since died) and put it on my new itouch device if I haven't syncronised my old device with my mac/itunes account before it died?

It is easy to download items you have purchased from iTunes again; this article will walk you through it: http://support.apple.com/kb/HT2519
You want the "Apps on iOS" section.

I have moved to uk from ireland and bought new iphone, set up using my existing Apple ID account and profile but won't let me buy install or update apps??

I have moved to uk from ireland and bought new iphone, set up using my existing Apple ID account and profile but won't let me buy install or update apps??
Can anyone advise me on what I need to do?
My existing account is linked to ireland as my bank account details are there, does this make a difference?
Please help!

Until you get a UK bank account and credit card, buy and redeem UK iTunes gift cards for use in the iTunes and Mac App Stores. But you need to switch your region/country to the UK store in your account information, as you can't use UK iTunes gift cards in the Irish stores, the gift cards are country specific.

New Edge Device (672) Addition in Existing Infra.

Similar Messages

Maybe you are looking for