New Epson WF 7620 will not print with Macbook Air, receive "Print File Was Not Accepted" message.

Hello! To anyone who tries to help me, thank you in advance!
I brought home a new Epson WF 7620 yesterday and did all the necessary stuff, installing it with my Macbook Air (Mac OS X ; 10.7.4.). I installed the software from the site, added the printer to my printer list, enabled "print sharing" and connected it to my wifi network. I am trying to use it wirelessly.
I tried to print a test page of a regular PNG image, but I am receiving the "Print File Was Not Accepted" message in my printer queue. I have changed the file type a couple times to JPG and PDF but more of the same. I have also reset the printer, and have repaired the disk permissions in the Disk Utility to try and get it to work.
None of this seems to be working, suggestions very appreciated!
Thanks
MP

Try Linc's suggestion first. That should cure your issue. If not, here's something else to consider:
PrinterMaccer wrote:
I installed the software from the site ...
Apple keeps a set of current software for Epson printers. You should start by going to System Preferences > Printers & Scanners and delete the printer from the list (using the "-" key). Then download Apple's software version from here:
Epson Printer Drivers v2.18 for OS X
Finally, set up the printer as shown here:
OS X: Connecting a Wi-Fi printer to your Wi-Fi network

Similar Messages

New Epson WF-7620 will not print; is offline after installing setup software

This is a problem that took me many hours to solve; but I did solve it. I thought I would offer it up so no one has to go thru the pain I did.
The problem is that during the Epson set-up procedure for Wireless printing, the mac cannot find the printer (or verify the printer exists) even though the printer has an IP address assigned to it. The reason for this is the printer (mine at least) comes configured with Bonjour turned off . . . and you'll need to turn this in for any mac to add the printer in a conventional way.
The way to turn Bonjour on is as follows:
1. Pull up a browser and type in the IP address assigned to the printer. On my home wifi network it will be something like XXX.168.1.3 where XXX is some 3 digit number. Once you pass thru the security queries the browser puts up, proceed to that site. You'll see a web page with detail on the printer. Go to Wifi/Network Settings->Services->Protocol. Find the Bonjour Settings and click on Use Bonjour. Exit this page and you'll see your printer when you add a Printer from Settings->Printers & Scanners--> the Plus sign (to add).

Try Linc's suggestion first. That should cure your issue. If not, here's something else to consider:
PrinterMaccer wrote:
I installed the software from the site ...
Apple keeps a set of current software for Epson printers. You should start by going to System Preferences > Printers & Scanners and delete the printer from the list (using the "-" key). Then download Apple's software version from here:
Epson Printer Drivers v2.18 for OS X
Finally, set up the printer as shown here:
OS X: Connecting a Wi-Fi printer to your Wi-Fi network

I have moved from the UK to New Zealand and Itunes will not accept my new Zealand bank details, as a result nothing will work on my phone and I cant access emails!

I have moved from the UK to New Zealand and Itunes will not accept my new Zealand bank details, I am trying to change my details on the Iphone 4s

Do you have a new Apple ID to use in NZ? If not open iTunes Store. Log out of your old Apple ID, then try to login. Select Create Apple ID from the dialog that appears. Make a new Apple ID for NZ with a NZ email address. Once that is approved and verified, log into the iTunes Store with the new Apple ID. This should fix all other issues.
Change iTunes Store Country on an iDevice
1. Tap Settings;
2. Tap iTunes & App Stores;
3. Tap View Apple ID;
4. Enter your user name and password;
5. Tap Country/Region;
6. Tap Change Country/Region;
7. Select the region where you will be located;
8. Tap Done.
Also, see How to Change Your iTunes Store Account Location | eHow.com.

HT1631 I am not able to recover my keychain access. I followed the directions to "Reset My Default Keychain" and then entered a new password. It will not accept a new password. How do I Reset or recover the KeyChain Access Password?

I am not able to recover my keychain access. I followed the directions to "Reset My Default Keychain" and then entered a new password. It will not accept a new password. How do I Reset or recover the KeyChain Access Password?

This is what you tried?
Resetting your keychain in Mac OS X...
If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
http://support.apple.com/kb/TS1544
Keychain Access asks for keychain "login" after changing login password...
http://support.apple.com/kb/HT1631

HT201320 New gmail account. Will not accept password with 1 capital letter and 1 number. What do I do?

Creating a new gmail account. The new account will not accept a new password. What have I done wrong?

After you have updated your device to version 5.1.1, have you tried resyncing everything from your iTunes yet?

TS1569 Brand new wireless aluminum keyboard will not accept passcode

.......... to pair with brand new macbook air. Apple Care support can't figure this out. Just tried a second, identical keyboard in two days. Same issue. First keyboard worked flawlessly with mid 2010 macbook pro. I'm ******!

I just does not accept that it should be nessecarry to use a usb keyboard when buying a brand new mac!
And luckily I managed to solve this in the end
My setup was is with a keyboard that was previously paired worth my MBP, and I tried a lot of things, but what did it in the end was this:
First I unpaired the keyboard from the MBP using http://support.apple.com/kb/HT1809?viewlocale=en_US&locale=en_US. Only, this time I ignored the first step which reads: "Press and release the On/Off switch on the wireless keyboard to turn it off." Thinking of it, how would the the keyboard know that it is unpaired, if it is turned off?
The 2 thing I did differently this time was that I did not power on the keyboard until it actually said so on the screen. This means that I powered on the Mini, waited until I had selected the language using the Trackpad, waited until the "Connect Keyboard" dialog appeared on the screen. Then I turned on the keyboard in pairing mode...
That's basically what I did to be successful! Hope it will help somebody else

When I try to activate my iMessage with the new iOS 7, it will not accept my original Apple ID. Also, when I try to use snapchat, it keeps popping up "login to iTunes to allow push notifications." please help!" I'm really frustrated

Please help!!!

I got this under XP before. I was totally baffled until I realized there was a network drive mapped to the same place XP was trying to mount my iPod. The common symptom is that you'll get this sort of "corrupt" error on one machine but it works ok on a friend's machine. If that's true for you, you can change the network drive mapping to another drive letter (easiest) or mount your iPod and change its drive letter in the disk management control panel (under admin tools).
Hope that helps... this one just about had me pulling my hair out until I recognized the problem.

I recently purchased a new computer and tried to move my itunes music to the new PC, I am not savay on computers, but music will not play on new PC, error (!) will not play and have to locate. Why is this please help.

please help, someone that doesn't have the savay on moving music from an old pc to a new pc. Music will not play message comes up and have to search. also purchased music from iPhone and does not show on my music library on PC. This is very frustrating. Thank you

It all depends on exactly how you move the library from one machine to the other. The database holding information about your library is normally in a folder called iTunes, with the media in a subfolder called iTunes Media. In this layout you can usually copy the entire iTunes folder from one machine to the other and it will work. If the media folder is split to a new location however then often the links to tracks will fail on a new computer.
You shoud find that the FindTracks script is able to repair the links in your library.
I'm not sure I know what is going on with the purchased music, however if you enable Edit > Preferences > Store > Automatic Downloads > Music you should be able to recover your past store purchases.
tt2

New ipad setup will not accept password. Any help on this greatly appreciated.

I am trying to setup my new ipad but it will not accept my exiting password from verizon. My mac works fine but not the ipad. Any help?

Try this:
1. Reset: Hold the Sleep/Wake and Home buttons until the screen goes dark and the Apple logo appears
2.Reset the network settings by tapping Settings > General > Reset > Reset Network Settings.
Note: This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings

? changing from an older computer to a new one. LR will not recognize my serial number. Help please

I am changing from an older computer to a new one. I downloaded LR on the new one but It will not accept the serial number. Hepl please

make sure you're properly 'installing' lr using the installation files:
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

JES Messaging Server 6.0 will not accept mail alternate address

JES Messaging Server 6.0 will not accept mail alternate address
I have installed the Sun ONE Messaging server 6.0 as part of an evaluation of the Java Enterprise System. This was installed along with Directory Server 5.2 and Identity Server 6.1. During the installation I created a top level organization (o=internet) knowing that I would want to create multiple email domains within it and a default domain. After the installation was complete I used the User Management Utility (/opt/SUNWcomm/bin/commadmin) to create some users within the default domain. I provided each user with a primary email address ([email protected]) and an alternate email address (mailAleternateAddress = [email protected]).
In testing the system I find that the Messaging Server will not accept messages sent to the alternate email address whether sent from the same server (via Messenger Express) or from an external server. It returns the error message: 550 5.1.1 unknown or illegal alias.
In attempting to trouble shoot this problem I have watched the Directory Server's access log when such an email is sent. It shows a query using [email protected] even though the email message was sent to [email protected] In any event the DS finds the user, but the Messaging server rejects the message.
[date_time] conn=120 op=11 msgId=12 - SRCH base="o=domain.com,o=internet" scope=2 filter="(mail=[email protected])" attrs="preferredLanguage mail mailEq
uivalentAddress"
[date_time] conn=120 op=11 msgId=12 - RESULT err=0 tag=101 nentries=1 etime=0
[date_time] conn=120 op=12 msgId=13 - SRCH base="o=internet" scope=2 filter="(&(objectClass=sunManagedOrganization)(|(associatedDomain=host.domain.com)(sunPreferredDomain=host.domain.com)))" attrs=ALL
[date_time] conn=120 op=12 msgId=13 - RESULT err=0 tag=101 nentries=0 etime=0
Any suggestions to eliminate this problem would be appreciated.

Both the primary and alternate email addresses are the same as the domain of the user.
Here is what I want to do. Email is sent to a primary email server (not this machine). Mail for some users stays on that server to be read and mail for other users is moved to a geographically separate server (the one in question) by specifying that the mail be forwarded to the specific host: [email protected] > [email protected]
On this second server I want to host two (or more) independent email domains. I do not want one of the domains to be a subdomain of the other. So during the installation I used o=internet as the root suffix and then used a different default domain (representing one of the registered internet domains). After installation I used the commadmin tool to create a second domain so now I have what looks something like this:
o=internet,
__ou=People
__ou=Groups
__o=domain1
____ou=People
____ou=Groups
__o=domain2
____ou=People
____ou=Groups
I then created some users under domain1 and some under domain2 so one user's dn is:
uid=user, ou=people, o= domain1.com, o=internet.
Mail sent locally to user@ domain1.com gets delivered correctly, but sending to [email protected] does not.
host2.domain1.com is the fully qualified domain name of the server.

Device will not accept my ID or password.

my new apple tv device will not accept my ID or password. entered correctly.

Welcome to the Apple Community.
Which password won't it accept.
Have you had any error notifications about time or date.
Are you properly conected to the network and don't have a 169.x.x.x address

Photoshop elements 13 will not print to my new epson wf-7620 error message;default printer could not be opened

frustrated! photoshop elements 13 will not print to my new epson wf-7620 error message;default printer could not be opened

I haven't been able to try this fix, but someone emailed me the below fix:
I had same problem.Elements13 would not open my new default printer, but worked ok on four other versions of Elements. No help from Adobe, after three days of searching & phoning adobe , I found out by:- Going into Elements 13, Press Edit button, down to "Preferences and across to general. Press the "Reset Preferences on next launch". I then suggest you go through each section to make sure that your chosen preference are still ticked/checked in.
It worked for me. Hope same for you.
I'm planning on trying this fix soon. Let me know how it goes for you if you get to try it before me. Will do the same. Thanks,
Chad

Epson xp-312 will not print wireless with 10.9

i am new to the mac so i got a epson xp-312 from our local shop and installed the driver what is the lastest from epson but it will not work wireless and will not find the printer. I have gone to network settings and you can trace it and it will come back saying that the ip address belongs to the epson but when you ping it it comes back 100% fail you can print from a windows pc wireless with no problem please help the driver i have tried is 2.15.1 dated 11th sept 2013 thank you in advance for any help

alamondo wrote:
i have a ipad and a iphone and they both can not find the printer ...
I am assuming (hoping!) you mean you have installed the Epson iPrint app on one or both of your iPad and/or iPhone, and Epson iPrint does not detect the printer.
If that's true, then Mavericks is definitely not the problem! Neither the iPhone nor iPad (nor Epson iPrint) rely on Mavericks.
Hunt for your printer using Epson iPrint. Make sure your pinter is on, tap "Scan", then tap the gear-like icon in iPrint to hunt for it.

I just bought a new Retina Display macbook pro, and I plugged in my iPod touch (4th gen) into the new computer, but it will not show up, even after I typed in the passcode. How do I get my iTouch to sync with my new computer without restoring my itouch?

I just bought a new Retina Display macbook pro, and I plugged in my iPod touch (4th gen) into the new computer, but it will not show up, even after I typed in the passcode. How do I get my iTouch to sync with my new computer without restoring my itouch?

iOS: Device not recognized in iTunes for Mac OS X

New Epson WF 7620 will not print with Macbook Air, receive "Print File Was Not Accepted" message.

Similar Messages

Maybe you are looking for