New G570 partitions not used?

Looking at my new G570 partition list I have 14.75 GB 100% free partition that I assume should have the recovery tools in it. Trying the OneKey Recovery program and selecting the System Recovery icon allows me to reboot into the "system recovery environment" and looks like it would complete if I hit the final "Start".
What has the laptop wasted 14.75 GB on then?

Originally Posted by lpphiggp
Having recently recreated our CA last December (2012), we issued new certs to most of our servers.
(long story short, our old CA had not yet expired but a tech claimed it had and recreated our CA.. it was actually good until 2014)
I've found that typically, on our OES linux boxes however, when I generate new certs via iManager/Repair default certifidfates, the new certs do not translate over to the cert used by httpstk/Remote Manager.
On this one server, as an example, it's still using an old cert that was issued 2011, and says it's good until 2015.
Do I have to manually export and import the new certs? (and if so, why isn't that built-in to the repair certificates function in iManager?)
Furthermore, this old cert lists no CA in the chain. We definitely had one. This isn't' the first NRM cert I've seen exhibit this behavior either.
How do I get these certs to sync up with the ones the server is actually using in eDirectory?
Thanks
Paul
httpstkd will use the default OES certs.
However, I've seen on MANY occasions:
1) After repairing the SSL certs, I need to reboot the server for things to take effect
and
2) NRM can use LUM. LUM (namcd) has an annoying habit of sometimes not replacing the actual certificate files. In other words, when you repair the eDir SSL cert, do a namconfig -k to re-pull the SSL certs down, it won't actually overwrite the file that's already on the file system that's corresponding to the updated SSL cert. I've (many times) had to manually delete the cert files, and then re-run namconfig -k and restart namcd

Similar Messages

  • HT203042 I need to deactivate my iphone 4. I no longer own and the new user can not use it.

    I need to deactivate my  iphone 4. I no longer own it and the new owner can not use it.

    Giop123 wrote:
    this is very easy to do. if you go to : Settings > General > Reset > Erase All Content And Settings. This will restore all factory settings and wipe the phone completely of all your information and data.
    Hope this helps
    Please reread the OP question:  it states that he/she no longer owns the iphone.

  • AFAB asking for new cost elements not used before.

    AFAB returns error indicating a range of cost elements that was not existing in the previous system and in the new system (ECC6) as well.
    I like to know why this error when it is not being used and how to rectify to allow AFAB.

    Hi,
    Cost elements does not exsist so there is no question of validity in master data.
    It is asking to create cost elements. So, i want to know why the system is asking or from where it is picking up?
    We have not used this cost elements before.

  • Can I use my original aperature install disc to install on my new computer? not using old one any longer.

    How can I use my original aperature install disc to install application on my new computer? I am not using my old computer and don't want to have to repurchase this application.

    You are  allowed to do this. Are you asking how to do it? Just put it in the DVD drive and install like you did the first time. You'll need the serial number included with the DVD's.
    regards

  • New MySites does not use the specified permissions

    I've changed the MySite Settings in Central Admin so that only my AD group called "DOMAIN\All employees" is added to the Read Permission Level setting. I've removed "All" and "All Windows".
    Now users create MySites, and at first the permissions seems right. When I check top level permission on new mysite, only the user and the group "DOMAIN\All employees" is present in the list.
    The problem is that the folder "Shared with everyone" and the lists "Social" and "Microfeed" does not get the correct permissions. When I check the permissions (since they have unique permissions) I can see that it is the claim
    "All" that has access, not my "DOMAIN\All employees" group.
    This means that the documents added to the "Shared with everyone" is available for all users, not only my employees. The same is for content in the social lists, the elements are visible in search results for all users.
    Does anyone know how I can change the default permissions of the folder and the two lists that does not inherit permissions from the root web of the mysite?
    Regards ElinK
    ElinK

    Hi
    ElinK,
    There is no out of the box way to accomplish this with SharePoint
    As you had said, one way is that we can use the code to change the MySite list permission for the existed MySite.
    Another way is that we can create MySite programmatically, break inheritance and add unique permission to List.
    There are some articles for your reference.
    http://social.technet.microsoft.com/wiki/contents/articles/18788.sharepoint-2013-programmatically-create-mysites-for-all-users-of-a-group.aspx
    http://blog.sharepointclick.com/2013/04/programatically-breaking-inheritance.html
    http://www.thespgeek.com/2011/08/assigning-sharepoint-list-item-level.html
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • New custom Template not using SRM theme when displayed

    Hi All,
    I have built a custom ABAP screen for SRM and generated and published the new template. When it runs, though, it looks like an R/3 screen instead of the slick SRM Theme. I generated it as a WebGUI with the standard theme 99.
    Any ideas what I must do to this template to make it look and feel like standard SRM?
    TIA,
    Alistair

    Hi folks,
    Thanks for the replies. The scenario is this: I have an existing standard Internet Service (BBP_BID_INV) which already uses theme 99. The templates that exist for this service look fine.
    I have a Zprogram with a screen to change the standard functionality. I cannot generate a template with theme SL as ITS does not find it (Probably because the service in SICF is already set to 99).
    If I generate using theme 99 I get the nasty "old ITS" screen.
    The top lines of the generated template are:
    `include(~service="system", ~language="", ~theme="dm", ~name="TemplateLibraryDHTML.html")`
    `SAP_TopInclude()`
    <html>
      <head>
        `SAP_PageTitle()`
        `SAP_Stylesheet()`
        `SAP_JavaScript()`
      </head>
      <body `SAP_BodyAttributes()` onload="`SAP_OnloadJavaScript()`">
    Can I just change the top line to ~theme="99" or ~theme="SL"?
    Alistair

  • How can i transfer my songs to my new computer? not using an ipod!

    Okay, not that the whole ipod hard drive situation is convenient anyway. I mean I didn't even realize that there was a certain way to save the files in need of transferring the songs. Here's the situation. I was using my boyfriend's dad's computer till I got mine, and I got mine only a week before coming to Japan. I was crunched for time, and I guess I didn't research it thoroughly, but knew I could use my ipod to transfer the songs. So I downloaded the songs onto my ipod. It wasn't till later when I realized why it wasn't working. Well now I'm in a bit of a pickle because I won't be able to get my ipod hooked up with that computer till next May. My boyfriend is coming to visit however next month, and was wondering if there was a convenient way for him to save the files, short of 50 cds, to allow me to transfer my music when he gets here. I searched the forums, but they all seem foreign! Can anyone help me?

    Hi, thanks for the suggestion. Are data DVDs expensive? and where can I find them? Once I get them, can I use the same steps as transferring songs using my old ipod? Couldn't find anything on transferring songs not with an ipod. Do I have to change preferences before saving them onto the DVD's. I can't seem to find that page again, but it seemed pretty specific about the steps I needed to take before saving the files onto the ipod and after hooking it up with the new computer. Can you help me with this?
    Sincerely, Diana

  • Powerbook Would Connect To Internet, New Macbook Will Not Using Airport....

    I purchased a new macbook yesterday and i am having problems connecting to the internet using airport and my belkin wireless router. Whenever i try and connect to the router I get a message saying it is not possible.
    My old Powerbook G4 still connects using the same router and airport but the new macbook will only connect via an ethernet cable, I have tried ringing belkin support who do not seem able to help me.
    Does anyone have any ideas to help me please?
    Thanks in advance for your help........

    I had the exact same problem yesterday, and I called Apple support. I had to download a software update (security and OS), and after that, it worked. Some people have suggested trying putting a $ sign before the Belkin password. It didn't work for me, but it might be worth a try. My macbook arrived yesterday and I've had problems with this and the keychain thing (I'm totally new to the Mac), and am still having problems with that. So I'll probably be calling support again today unless I can find a solution to that problem here on the forum.
    Good luck with yours, I hope you get it fixed
    MrsClem

  • TS4036 i got replacement phone for faulty i-phone 5... new phone would not use wizard as i cloud back-up was  ios-7 and new phone needed upgrade first.  now what.  I've been using phone over christmas and have a few christmas pics, etc. that I don't want

    Hi, 
    New here, trying to restore my i phone 5 to newly refurbished i phone 5 and couldn't do it w/ wizard.  old phone had OS-7  new  came with OS-6... wouldn't let me restore from cloud without same operating system.
    Installed os-7 only option then was "new device"  which closed wizard and welcomed me to new phone.
    on settings I see my old i phone in cloud
    since I've added new contacts, pics.... (got it Christmas eve)
    I'm guessing somehow I need to save pics to computer;
    backup contacts etc to new device
    restore old i phone back up then somehow get contacts and pics only back on new device...
    am i on right track or is there an easier/better way?
    don't know how to do last step - w/o replacing majority of contacts
    Thank you,
    Maid Marian, II

    Simple process. If an iPhone go to the Apple Store and not Verizon
    the phone from Verizon will be a refurbished device and not new unless under the 14 day worry free guarantee
    good luck

  • Queries not using indexes

    We installed and configured a new environment of OBIEE and are trying to run a simple query in our data warehouse. This simple query takes only 7 seconds to complete in our previous data warehouse using TOAD but is taking 8+ minutes to complete in our new environment also using TOAD.
    Looking at the explain plans, the query in the new environment is not using indexes. Does anyone have an idea why it is not using the indexes? We checked and all of the indexes have been created and still exist. We also ran Analyze again on the two tables used n the query but the query still did not use the indexes.
    Please let me know if anyone has ideas ASAP since we are baffled.

    - Are the object statistics identical? The ANALYZE statement has been depricated for a while, particularly for data warehouse environments where there may be partitioning. Were you not using the DBMS_STATS package to gather statistics in the previous environment? Were statistics computed on the indexes?
    - Can you post the two query plans (formatted via DBMS_XPLAN and including the filter conditions)? It is not immediately obvious to me what index(es) might be useful here unless one of the two conditions is particularly selective which doesn't seem terribly likely based on just the table names involved.
    - When you do post the query plans, please use the \[code\] and \[code\] tags to preserve the white space so that the output is readable.
    Justin

  • New tabs do not display

    my firefox just updated today
    all my existing tabs loaded correctly and are present, however I cannot make new tabs- they do not display or load by any command and i cannot toggle over to them when switching through existing tabs.
    it is as if the new tab command is not executing a new tab now.
    a site on an existing tab can create another tab, such as what mozilla did while i was searching for answers to this question, but i cannot make any new tabs via keyboard or menu command.
    i need to make new tabs and not use existing tabs which are already in use!

    hello, can you try to replicate this behaviour when you launch firefox in safe mode once? if not, maybe an addon is interfering here... (reports by other affected users indicate that this might be caused by various toolbar addons)
    [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

  • New CD-R not mounted or accepted by Itunes for burning

    I have Verbatim ( printable ) CD-R , 700 MB, 25 spindle , 52 x.
    Problem: After inserting and some ' unhealthy ' sound Imac ejects it and will not mount it neither accept it for burning ( e.g. from iTunes ).
    I've already checked the some error log files ... nothing observed here.
    What else can I do ?

    It may be a hardware problem, but you can try the following.
    Open System Preferences +CDs & DVDs+ pane. Change the setting for +When you insert a blank CD+ to something else, such as Ignore. Now insert the blank CD-R. If it now accepts the disc without ejecting it, you may have fixed the problem. Change that setting back to whatever it was before, and see if it works properly.
    If that does not help, you can do a test by creating a new admin user account in System Preferences Accounts pane. Log out and log in to the new account (do not use Fast User Switching). Try inserting a blank CD-R. If it works properly in the new account, the hardware is OK, but you have some hidden issue in your current account, probably a corrupted user preference file.
    If it still does not work, the problem is either with hardware or with the overall Mac OS X system.

  • Windows File Share not using Correct NIC Interface.

    Hi
    I have Windows 2012 R2 server with two 1gb NICs.  I want to use NIC1 for the regular network traffic/Internet and the NIC2 for database traffic.  NIC1 has IP Addresses of 64.141.xxx.xxx (I am not showing the last 6 digits for security reasons)
    and 192.168.10.21.  NIC2 has the IP Address of 192.168.11.2.
    The Workstation accessing this server also has two NICS.  NIC1 has the IP address of 64.141.xxx.xxx and 192.168.10.22.  NIC2 has the IP Address of 192.168.11.4.
    I created a share on the server myDataShare$.  On the Workstation I access the share using \\192.168.11.2\myDataShare$ and everything works accept that the data from the share is sent across NIC1 but I want it to go over NIC2.  If I add static
    routes to both machines it makes no difference all network traffic always goes out on NIC1 for both machines.
    If look at the status of each NIC on the send and receive bytes only NIC1 show any traffic.  NIC2 is silent.  How do I get traffic for the 192.168.11.0/24 subnet to use NIC2?
    The strange thing is that if I ping a 192.168.11.0/24 address it goes over NIC2 but file sharing seems to ignore NIC2 altogether.
    Thanks,
    Simon

    Hi Simon,
    Windows Vista and later are based on the strong host model. In the strong host model, the host can only send packets on an interface if the interface is assigned the source
    IP address of the packet being sent. Also the concept of a primary IP address does not exist.
    If the program specifies a source IP address, that IP address is used as the source IP address for connections sourced from that socket and the adapter associated with that
    source IP is used as the source interface. The route table is searched but only for routes that can be reached from that source interface.
    You can try to set the “skipassource” flag ,by using this flag, the added new addresses are not used for outgoing packets unless explicitly set for use by outgoing packets.
    The detail information about skipassource flag:
    Source IP address selection on a Multi-Homed Windows Computer
    http://blogs.technet.com/b/networking/archive/2009/04/25/source-ip-address-selection-on-a-multi-homed-windows-computer.aspx
    The related KB:
    How multiple adapters on the same network are expected to behave
    https://support.microsoft.com/en-us/kb/175767/en-us
    The related third party article:
    Exchange 2013 on Windows Server 2012 with multiple IP addresses on a single NIC
    http://blog.enowsoftware.com/solutions-engine/bid/185076/Exchange-2013-on-Windows-Server-2012-with-multiple-IP-addresses-on-a-single-NIC
    I’m glad to be of help to you!
    *** This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these
    sites and has not tested any software or information found on these sites; therefore, Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers in the use
    of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet. ***
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • How can I create a new partition to install Windows 7 by not using Bootcamp

    How can I create a new partition to install Windows 7 by not using Bootcamp?

    If you want to dualboot you have to use boot camp i think. I think you have already a full disc and cannot make another partition I'm I right?
    Your question seems a bit blurry so I'm giving you a general tip here.
    If you want to just try the beta you can always use Sun's "Virtualbox".

  • When I sync my iPod to my MacBook through iTunes new events do not show up and old events are not deleted. I am using Snow Leopard  and not iSync.

    I am using Snow Leopard on a MacBook. I have an iPod touch 3G. I do not use iSync it Mobile Me. When I sync my iPod through iTunes new events on my iPod do not show up on my Mac and old events do not delete. I have read help instructions that include deleting the data on the iPod. The iPod has the correct data and the Mac does not so I have not followed those instructions. I need help as the only reason I bought the Mac was to be able to sync, back up, view and print my calendar. Currently it is useless. If only Apple could have learned from the elegance of the Palm software.

    Start here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

Maybe you are looking for