New GL cubes 0FIGL_V10, 0FIGL_V11

Hi,
We are planning to use new GL cubes 0FIGL_V10, 0FIGL_V11 and 0FIGL_R10. I believe these cube will directly get data from OLTP through BAPI.
Can any one got experence with how to set virtual cubes for reporting and data extraction using BAPI, please give me steps by step solution?.
How to set-up remote cube 0FIGL_R10 on basis of 0FIGL_C10.
We have already done set for new GL cube 0FIGL_C10 and loaded data.
thanks in advance.
Regards,
SDK

0FI_GL_10 = General Ledger: Balances, Leading Ledger 
This DataSource extracts the totals records from the leading ledger in the new General Ledger.
<b>3FI_GL_xx_TT</b> = General Ledger (New): Balances from Any Ledgers (Generated)
This DataSource extracts the totals records from a specified ledger in new General Ledger Accounting. This ledger may be the leading ledger or any other ledger.
Ask functional guys if they activated the above 3FI_GL_xx_TT ledger and if yes follow the below link
http://help.sap.com/saphelp_erp2005vp/helpdata/en/be/928f40f5767d17e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e2/f16940c3c7bf49e10000000a1550b0/frameset.htm
Names ending with
R = Remote cube based on DTP or datasource in R/3
thats why they have that R/3 sysmbol
only this cube will have the option of "ACTIVATE DIRECT ACCESS"
V = Virtual Cube based on API
thats why they have that symbol 3rd.
Hope it Helps
Chetan
@CP..

Similar Messages

  • Issue with reports on 0FIGL_V10,0FIGL_V11-0GLACCEXT doesn't display in BEX

    Hi All,
    We are implementing new GL functionality and as a part of it , we copied the standard cube 0FIGL_C10 to ZFIGL_C10 and virtual cubes 0FIGL_V10,0FIGL_V11 to ZFIGL_V0, ZFIGL_V11.
    We also copied all the standard reports to our custom created cubes.
    Standard reports on the above virtual cubes have characteristic called Financial Statement Item(0GLACCEXT).After copying the standard reports on to our custom created virtual cubes, we thought we do not need Financial Statement Item(0GLACCEXT) in the reports and we removed the same.
    Now, we realized the need of Financial Statement Item(0GLACCEXT) in our reports but we are not getting the same in the query designer eventhough the same is available in the Virtual Cubes under Account dimension.
    We want this characteristic in the report but unable to get the same in Query Designer. Does someone face this problem and resolved ? Please need inputs to resolve the same.
    Thanks,
    Kumar

    Hi Voodi,
    Appreciate your quick response.
    Yes, I can copy the query with a new technical name but I am interested in why a characteristic which is available in Cube is not getting displayed in the Query designer ?
    Are there any other settings or steps , I m missing to make it available in the report ?
    Regards,
    Kumar

  • Use of virtual cube 0FIGL_V10 for reporting on Financal Statements

    Dear all,
    I am new to the GL reporting and I have a question about the usage of the virtual cube for reporting on Financial Statements.
    On the content site I see that you can report your Balance Sheet based on the infocube 0FIGL_C10, where you can use the infoobject 0GLACCOUNT to display the balances.
    I also installed the Virtual Cube 0FIGL_V10, which has the infoobject 0GLACCEXT to show the Financial Statement Item hierarchy.
    My questions are:
    - to create a Balance Sheet Report, is it advisable to use the content query 0FIGL_C10_Q001?
    If I run that query now, it is showing the data on seperate G/L accounts, where I would like to see a hierarchy display.
    For reporting on the capital expenditure however the requirement is that some G/L acoounts don't have to be taken into account. How can I exclude those then from the hierarchy for that report?
    - to create the P&L, advice on the content site is to use the virtual cube because you have the Financial Statement Item hierarchy available there and you can report on specific financial statements.
    Can anyone tell me the added value of using the Virtual Cube? Or can I skip it and just add the Financial Statement Item hierarchy in the 0FIGL_C10 cube and create a report where I select the nodes of the hierarchy that are only applicable for the P&L? Will that corrupt the figures or have any other effect?
    Thanks in advance for the help!

    Hi Sundar,
    As ravi said the VC can be used when we have leass number of users, basically in VC the structure will be available. And moreover when you generetae a report based on Multiprovider which is based on the VC then it will pick up the data directly from the source to which it has been connected..
    Hope it helps..
    ***Assign Points***
    Thanks,
    Gattu

  • Incorrect data with Virtual Cube 0FIGL_V10 when used in MultiProvider

    Hi All,
    I am using 0FIGL_V10 in a multiprovider with 0FIGL_O02 to solve a reporting requirment.
    My problem is that I am unable to get the same revenue figure from the multiprovider as I am from the virtual cube alone.
    In the multiprovider query I have filtered my revenue KYF's by:
    value type
    version
    currency type
    I have fiscal period across the top of the columns and filtered for example to 001.2009 - 006.2009
    This query returns double the revenue value that I get if I run an indentical query on the base cube 0FIGL_V10. 
    I have found that if i filter fiscal period directly in the KYF restriction it outputs the correct result which is confusing.
    Any ideas ? 
    help much appreciated.
    Mark

    Hi ..
    Thanks for the suggestion but this note has already been implemented into our system.
    Any other thoughts ?
    thanks and regards
    Mark

  • Hiding Variables in new Multi Cube

    Hello Experts,
    we will develop a new Multi Cube but with less fields but with the same Info Objects. Therefore I don't need all of the existing variables. Is there any possibility to hide the not required variables for the new Multi cube?
    Thanks in advance.
    AK

    Hello,
    first, my name is Anastasios
    We have a MC with for example 100 Info Objects. Now we want to use just 60 of them in another MC but I don't want to use all the variables.
    Example:
    IO1 has 10 variables in MC1
    IO2 should have 3 variables in the new MC2
    Is this possible? If yes, how could I do this?
    Thanks and Regards,
    AK

  • Period 0 not exist in New FIGL Cube

    We are using new FIGL Cube (0FIGL_C10) and trying the drilldown using Posting Period (0FISCPER3), however it only shows period 1 through 16 and also a period that is Null (#).  We are trying to restrict to Period 0, however this does not exist in the provider. 
    We are using "Fiscal Year" - 0FISCYEAR and "Posting Period" - 0FISCPER3 for our queries.  The compound "Fiscal year/period" - 0FISCPER has Period Z4/000/2007 and works fine, however when looking at Posting Period alone, it does not show period 0 in the cube.
    Does anyone why 0FIGL_C10 does not have Posting Period 0 (Zero)??  Has anyone else come up with a workaround?

    that works when using the compound characteristic "Fiscal year/period", however when you don't use the compound field and you use separate characteristic "Fiscal Year" and "Posting Period" there is no period zero in the cube.  Instead, it gets put into posting period "#".  It's weird because the text value is "000", however they key is "#".  When you do a drilldown by posting period, it will show the periods as follows:
    001, 002, 003, etc etc and finally "#".  This does not look right, it should display as follows:
    000, 001, 002, 003, etc etc.

  • Issue when running  Balance sheet report  on Virtual Cube (0FIGL_V10)

    Hi ,
    We are actually implementing new General ledger and I activated all the underlying ODS & cubes.
    While running standard report(0FIGL_V10_Q0001) on 0FIGL_V10 , I am getting the following error:
    Characteristic 0GLACCEXT has a constant value (F) and cannot be used.
    Characteristic 0GLACCEXT Financial Statement Item not available in the Infoprovider.
    FYI, The above characteristic is available in the cube and I dont know what is the fix for the same.
    Can anyone please let me know if the same problem was faced and resolved.
    Regards,
    Kumar

    Hi Sumit,
    Thanks for the response.I did following checks in RSRV yesterday before I posted this thread.
    Master data checks for 0GLACCEXT went successful but when I checked my Infocube and dimension tables,its giving me the following error:
    Diagnosis
    There is no dimension table for dimension /BI0/D0FIGL_V102, even though the dimension is not a line-item dimension.
    Procedure
    Try to reactivate the InfoCube. Data that is contained in the InfoCube is not deleted.
    As per the above procedure , I reactivated the cube and tried running the query but it still gives the message,0GLACCEXT characteristic cannot be used.
    I can see all the dimensions in the Infocube(0FIGL_V10) coming correctly and I also can reactivate but still the error doesn't go.
    I also tried installing the Cube one more time if the error was because of not installing properly and I tried running the report but still I did not get to a resolution..
    I am now not sure , what to do to fix this problem.
    Regards,
    Kumar

  • GL Accounting (New) 0FIGL_C10, 0FIGL_R10, 0FIGL_V10

    Hi Gurus,
    I need your help to setup 0FIGL_R10 and 0FIGL_V10 based on 0FIGL_C10. I've never worked on Virtual Cubes before. I did these steps below kindly guide me if I am on the right track:
    1. Installed 0FIGL_C10, 0FIGL_R10 and 0FIGL_V10 also ODS: 0FIGL_O10.
    2. Loaded data from 0FI_GL_10 then INIT w/o Data Transfer to 0FIGL_O10  then Update ODS to 0FIGL_C10 (initial update) the loading was successful for 0FIGL_C10.
    3. What's next? I've read some of the posts here about when you right-click 0FIGL_R10 there should be an option "Activate direct access" however, when I do that I only find Generate Export DataSource. Is there also a difference with the setup with 0FIGL_V10?
    4. Installed all the necessary Business Content objects already (ex. queries)
    Secondly, when I installed 0FIGL_R10 and 0FIGL_V10, there were small icon beside it that says '3rd' while in 0FIGL_C10 it says 'R/3'. I'm bit confused here what's this for?
    Third, based on SAP Help, DataSource for this new GL includes 3FI_GL_xx_TT, do I need to implement this? What's the difference between the data that I am getting from 0FI_GL_10?
    I will assign points that will satisfy my confusion.
    Thanks!
    Cereal

    Hi Rod!
    Many thanks for your reply. I already read the link you gave before I send my question to sdn. Regarding your reply, yes the reporting requirements needs all these objects, at first I installed only the cube 0FIGL_C10 but then they also need Profit and Loss which can be found on the Remote cubes V10, R10. Actually, I have another question about it because they also need reports for Fixed Assets which can be found in the old GL 0FIGL_C01. Will it be redundant if I used this object or is this data can be found on the new FIGL_C10? Sorry I am not really familiar with Finance side.
    With regards to no.2, my purpose here is to setup an InfoPackage to load Delta Update. However, you said that you presume that there are no data records loaded when I did the INIT w/o data transfer. I am a little bit confused because I checked my ODS and there are transferred records and added records. What is the ideal setup to load data when there should be a delta update too? Then when I 'Update ODS in data target to 0FIGL_C10, I used Initial Update too and there are records transferred too. Is this procedure correct?
    With regards to no.3, I don't see Activate Direct Access only Generate Export DataSource when I right-click 0FIGL_V10 so I presume I need to Generate Export DataSource then replicate my BW system, then look for the 80FIGL_V10 in InfoSource then what's next? How can I know if it is actually connected to 0FIGL_C10 in which I checked the FM RS_BCT_FIGL_DATA_GET_VC10 and it was defined  in Import tab, I_BASIC_INFOPROV - '0FIGL_C10'.
    With 0FIGL_R10, I can Assign Source System so whenever I do the query will it automatically call from my source system?
    With regards to no.4 actually whenever I installed Business Content objects it's always, "in data flow before and after", Is this correct?
    Please enlighten me with your answers.. Thank you very much.

  • Adding new object to 0FIGL_V10

    Hello All,
    I installed the standard data flow for  Virtual Infocube 0FIGL_V10 and the report was ok (about monthly result). After that I added a new object to the data flow (0AC_LEDGER). But now I don't have the same result in the report.
    Do I need to modify the function RS_BCT_FIGL_DATA_GET_VC10?
    Thanks

    Hello Chandran,
    The new object (0AC_LEDGER)  in the Update Rule from Infosource to ODS is direct assignation and overwrite. From ODS to Infocube is the same direct assignation.
    Thanks
    Jose

  • Query on Virtual cube 0FIGL_V10 show old "Last Data Updated:" on Portal

    Hello all,
    We are using the SAP delivered virtual cube for G/L financial statements reporting. We are running these queries on Portal (BI 7.0) we are using the 0ANALYSIS_PATTERN template. Now since we are not actually loading data in this cube the template show "Last Data updated" as long time back, I am guessing when the cube was last activated or transported.
    The template and time stamp is working perfect for queries on all other cubes or Multiproviders.
    The business users are asking can we have the actual time stamp there (when actually the data was last loaded),
    Does anyone have any idea how we can do it without actually rewriting the queries on standard cube.
    Thanks in advance,

    Hi Kiran,
    Always last update data status only will see in our reports on last data updated date. It may be activation of data in cube. please check is there any option of activate data in data flow level.
    Try to create one record in remote data source  and load it again. It may be find the latest status.
    Thanks,
    Chandra

  • 0FIGL_V11 -- Name of Cube ( Virtual )    0FIGL_V11.

    Dear All
    This is virtual cube whcih is reading data directly through R/3 System when executing  the query.
    I have created Analysis Authorization and role as we we created many other roles and analysis authorization.
    Whenever, the user executing the query, its giving error that "NO DATA FOUND".
    I used Analysis Tools in RSECADMIN to "Execute as user with Restricted authorizsation", the query work and display the required data.
    Please Advise!
    Regards
    Anwer Waseem

    Hi Anwer,
    I am not sure if the issue still persists. However, from the error, I infer that the authorization to S_RS_DTP is missing. Revisit the PFCG roles assigned to the user, and ensure that S_RS_DTP is assigned along with the S_RS_COMP, and COMP1.
    Also, in the analysis authorization, the 0TCAIPROV should have the virual providers, with 0TCACTVT 02, and 03.
    This should get all the data for the user. Check and revert if you have any further questions.
    Regards,
    Raghu

  • Deliver new Content (Cubes, Objects etc.) via AAK

    Hi there,
    We have developed a project including InfoCubes and related Objects, Queries and Process chains etc.
    Now we would like to continue and distribute it by using the SAP AAK.
    So far we have not been able to. It was not possible, because all our Objects were "forbidden". We figured out that we have to set our system to a "content-system", but how to continue - no idea.
    My question is: has somebody already used the AAK for bi-content and knows those problems or has somebody a plan how to get from content to the final AAK-package?
    Thanks in advance
    Yours Mark

    Not all of the listed email recipients on my contact form are receiving the inquiries.    Muse allows me to add several email addresses separated by a semi-colon (see below from Corey Wrote) but only one of the three addresses are receiving the contact form inquiries.
    Corey@Adobe wrote:
    Forms
    We've added a new Form widget to the widget library.
    You can easily configure the form to send the form submissions to multiple email addresses, and optionally redirect users to another page after submitting the form.
    You can add and remove fields, and style the form as you would other Adobe Muse elements. You can independently style the various states of the form, and form fields to provide a compelling user experience, with visual cues for error states, empty states, and more.
    Because Form processing requires server-side support, Adobe Muse forms are configured to work when published to Adobe Business Catalyst. If you make changes to your form and publish again, Adobe Muse will make the appropriate changes to your Adobe Business Catalyst forms.
    Adobe Muse will safeguard data when redesigning your Adobe Business Catalyst forms                
    If a field with no data submitted is removed, it will be deleted from the database.
    If a field that has submitted data is removed, it will be preserved in the database, but can be deleted from the Adobe Business Catalyst admin console if desired.         

  • New Charger Cube

    I just bought a new Noodle Flat Sync USB Data Cable Cord 3FT + wall charger (5v 1000mA) and recharged my iPhone 6. Now all it will do is show the Apple logo, flash to an entirely red screen, go black and then go back to the Apple logo. When I plug it into the USB port on my MBA my MBA tells me 'USB Devices Disabled. Unplug the device using too much power to re-enable USB devices'. What happened?

    From what I've read about the cord it appears it does not meet Apple's MFi certifcation. As for what exactly happened I don't know but from the sound of it your phone has been damaged. It's impossible for me to determine over the internet of course so I suggest you take your phone into and Apple store or Authorized Apple Service Provider and have the phone examined.

  • New Extractors GL with ECC 6.0

    All,
    Currently we have ECC 5.0 system and we have 0FI_GL_10 extractor providing us the reports based on P&L and Balance Sheet. The major issue with it is that it brings in 51 times the number of records because we have 16 periods and 3 currencies.
    We are planning on upgrading ECC system in near future. We want to have our GL base reports coming out of the new extractors. I have heard that the new extractors make it much better with ECC 6.0. We have our blance sheet and Detailed P&L reports coming out of current extractor.
    Can anyone who has implemented new extractor help on explaining which new extractor can best replace this functionality?
    Thanks in advance.

    Hi,
    Go through the links
    http://help.sap.com/saphelp_nw70/helpdata/en/e2/f16940c3c7bf49e10000000a1550b0/frameset.htm
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/29/830e405c538f5ce10000000a155106/frameset.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/e6/f16940c3c7bf49e10000000a1550b0/frameset.htm
    Re: New GL cubes 0FIGL_V10, 0FIGL_V11
    Note 1070629 - FAQs: New General Ledger Migration
    Cost Elements:Cost Element ( KSTAR ) should be available in the extract structure ( FAGL_EXTSTRUCT_LEAD ) of 0FI_GL_10.Append the structure to get cost element, activate , uncheck the hidden tab.
    Features of the Extractor
    Extraction method: F1 (function module (complete interface))
    Extractor: FAGL_GET_TT_DATA_LEAD
    Extraction structure: FAGL_EXTSTRUCT_LEAD
    If you include your own fields in the totals table of the new General Ledger using transaction FAGL_GINS, these fields are not included in the extraction automatically. You first have to include them under the same name in an APPEND to extraction structure FAGL_EXTSTRUCT_LEAD. The fields of the APPEND structure are then filled automatically.
    Santosh

  • GL Data Load - INIT and FULL

    Hi,
    I am getting different record count for Full and Init GL - Data loads.
    Count for Init is about 300 records less than the count for Full load.
    What could be the reason ?
    Thanks,

    while posting question be clear what cube/datasource ,which GL OLD or NEW you are working whats the background...else its just speculating and beating around bush guessing..
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/45/757140723d990ae10000000a155106/content.htm
    New Gl data flow-
    Re: New GL cubes 0FIGL_V10, 0FIGL_V11
    Hope it Helps
    Chetan
    @CP..

Maybe you are looking for