New iphone with fail software
it say i must connect to iTunes
but i reboot my iphone
its works again
about a min, my iphone no signal
then it say i must connect to iTunes again
i have restore it twice but it still isn't work
who can help me?
I done a software update this morning and my phone rebooted after the update this is how I came across the issue. But even if I reboot my phone it should not have this issue. I should be able to reboot my phone at anytime without issues like this.
Process to reboot phone is hold button in untill phone power off slide comes on and then I slide and phone switch off
Similar Messages
-
My iPhone 3Gs is now no longer a recognised device on iTunes after I downloaded the new iTunes with iCloud software, but it does recognise my iPad2??
I run both Mac and a PC and have iTunes on both, which has previously recognised my iPhone. I had updated my Mac with the new iTunes software with iCloud and updated my iPad2 just yesterday. I then wanted to do the same with my iPhone today, but my Mac wouldn't recognise the device so I tried it on my PC, which recognised the phone but told me I needed to update my iTunes and this in turn wanted to update my iPhone software. After completing all this and restarting, my iPhone now shows the iTunes icon with the USB plug pointing towards it, obviously wanting me to plug it in to my computer to re-connect with iTunes, but now neither of my computers recognise my iPhone and my PC states an 'Unknown Device'. My Mac doesn't even see it. Can anyone help as I really need to get my phone working?? ThanksHold down the Home and Power button for 20 seconds. And try to update again.
Also read and follow this:
http://www.apple.com/support/iphone/assistant/restore/ -
How do i sync my new iphone with backup of my last one?
my last iphone was stolen and i got a new one (4s). i accidently connected it to my itunes already and didn't know i was supposed to use the backup when it popped up. does anybody know how do i sync this new iphone with the backup of my last one?
Find your device in the iTunes window, Right click>Restore From Backup, then select which one you want
-
I just tried to sync my wife's new Iphone with "my" ITunes. Bad mistake!! I guess "my" itunes thought her phone was mine and "somehow" went into "restore" mode and basically turned "her" phone into mine - ie. contacts, photos, etc.
Can your have two phones one Itunes?? Or should I just open a new Itunes account on her computer and "start" from scratch?? If I do the later, how do I transfer all the music on "my" Itunes to hers???You can sync as many iphone/ipads/ipods as you like to one computer/library.
-
I have a new iphone and went into Itunes and it said my new iphone needed a software update. I let it do this and now the apps that I put on won't work and when pressed just flash on then off the screen. I paid £20 for one of them so any help would be appreciated.
Memory Map: http://www.memory-map.co.uk/iphone/
0870: http://www.simonmaddox.com/
Viber: http://support.viber.com/home
VoucherCloud: http://questions.vouchercloud.com/ -
Can you merge Iphone data from a new iphone with an old back up?
I am looking for some advice.
I recently had my my iPhone and my MacBook Pro stolen at the same time. Fortunately I managed to get a new iPhone on my insurance which I received before I bought myself a new MacBook. I resorted my MacBook from a back up I kept separately. I wan't to sync my new iPhone with my previous iPhone data held on my iTunes. I would like to do this without loosing the SMS messages, apps and data held on my current iPhone. The other issue is that my new iPhone has a newer version of iOS then my previous iPhone.
Is it simply a case of just plugging my phone into iTunes and it will automatically sync the data and merge them or will I have to so something else to merge the two accounts?
Thank you in advance,
Best Wishes,
JamieSorry, you can't do what you want. The restore from backup process is all or nothing. Yes, you can restore from your previous phone's backup, but you will lose all new data...not in that backup...currently on your phone. There is no supported way to merge this data.
-
Can anyone help with associate my new iPhone with iTunes? My other old devices are there, but I see only how to delete one, not how to add one. Thank you.
iTunes Match is a subscription system that allows you to upload your own music (e.g. coped from CDs) to the cloud so that it shows (in the cloud) on your devices and computers without having to sync/copy it.
Automatic downloads allows to, for example, buy an app on your computer's iTunes and have it automatically download on your phone without having to connect and sync it or go to the Purchased tab in the App Store app on your download and download it yourself - but doing that, going to the Purchased tab and redownloading an app, should get it associated.
But no, I'm not aware of any problems that not having it associated causes. -
everytime i link my iphone up to my laptop the message 'welcome to your new iphone' with the option restore from back up or new iphone. i once did restore from back up and it deleted all my recent pictures, music etc. how can i get pass this stage?
Hi Khuram1981 - thank you thank you thank you! All sorted! dont suppose you know how to fix another problem I have??? for weeks now, since updating to ios5 I think, for some reason every time I have tried to log onto app store it says CANNOT CONNECT TO ITUNES STORE. It's nothing to do with my computer, and I've been to the Geniius bar but they couldnt help and nothing I seem to do lets me update my Apps and even worse, I cant even buy any more. Any suggestions?
Again thank you SO much for helping with other problem = a real relief.
Chatterwind xx -
pioneer 8400 DVD receiver player, as iPhone ios6 update now when connecting the new iPhone with ios6 to my car DVD 8400 unit, when playing music such as on my phone or Pandora the track button does not function or work at all not even if i press skip track forward or back on the unit it doesn't function everything works except that. on listening to radio or anything else related not pairing thru Bluetooth unit works fine, seems there to be Bluetooth update that is not making iPhone and unit not compatible at all. does pioneer need fix this problem with update firmware or thru apple need help. my iPhone was working fine before with previous ios 5 before.
Dear Valued Pioneer Customer:
We would like to inform you of the availability of an optional Bluetooth® firmware update (HW05-SW01.27.20) that enables Bluetooth AVRCP control and metadata display from a compatible Pioneer CD or DVD Receiver when used with an iPhone® 5 or iOS 6 device. If you do not own an iPhone 5 or iOS 6 device, there is no need to install this update.
This firmware update may be used only with the following 2012 Pioneer products:
CD Receivers
DVD Receivers
DEH-P8400BH
DEH-P9400BH
DEH-80PRS
AVH-P2400BT
AVH-P3400BH
AVH-P4400BH
AVH-P8400BH
In order to perform this update, the following items are needed:
A Pioneer CD or DVD Receiver above with built-in Bluetooth
Laptop with built-in Bluetooth running Windows® 7
Bluetooth firmware update (HW05-SW01.27.20)
How to Obtain the Free Firmware Update
1. Download the INSTRUCTIONS for the optional Bluetooth firmware update (HW05_SW01.27.20).
2. Download the UPDATE FILE to a computer and transfer the file to a compatible 2012 Pioneer CD or DVD Receiver via a Bluetooth-enabled Windows 7 laptop.
You can also arrange for Pioneer to update your 2012 Pioneer CD or DVD Receiver by calling Pioneer Customer Service toll free at 800-421-1404 during regular business hours (M-F 10AM-7:30PM Eastern Time, except on holidays). If this firmware update is performed by Pioneer, there is a charge of $60.00 (this charge includes return shipping of the updated unit within the U.S.). Charges for removal/reinstallation of the unit and shipment to Pioneer are the customer’s responsibility.
How to Determine if the Firware Update has Already been Installed
CD Receivers:
• With the unit turned off (press and hold the source button until the CD Receiver turns off), press and hold the center of the volume knob to bring up the Settings menu → rotate the volume knob until "BT Version Info" is displayed and then press the center of the volume knob → The firmware version should show HW05-SW01.27.20.
DVD Receivers:
• With the unit turned off (press the home button and select ‘OFF’ from the source icons), press the home button → Press the “System” icon at the bottom of the screen → Select the “Bluetooth Version Info” option → The firmware version should show HW05-SW01.27.20.
If the Bluetooth firmware version shows HW05-SW01.27.20, no further action is necessary.
Questions
If you have any questions, please contact the Pioneer Customer Service Center toll free at 1-800-421-1404, Monday through Friday, 10:00 a.m. to 7:30 p.m. (Eastern Time), except on holidays.
Sincerely,
Pioneer Electronics (USA) Inc. -
I recently moved to Australia and received a new iphone with a local AUS number. I have a backup of my US iphone in the icloud. Question: when I activate my new AUS iphone which option should I choose - new phone or restore from backup? I would like to have all my contacts, email, etc. however wasn't sure that option was appropriate since it is a different/new number and a new phone.
Yes, as new iPhone then restore from backup.
-
I cant setup email on my new iphone with yahoo.
I cant setup email on my new iphone with yahoo server. It keeps saying server is unavailable when I put my yahoo password in.
go to your contacts> and open up a contact> and face time will be a options
-
I am using my old iPhone for playlist for my Dad's funeral as that meets the crematorium requirements. Some tracks - uploaded from personal CDs to MacBook Pro and successfully transferred to new iPhone (with small doc) won't transfer on syncing. Most do, but why won't some, of my own music sync when others off the same album and in the same playlist do? I have now checked the storage, freed up 766MB, how can i not sync (and get everything i've just deleted back) but upload the required tunes? All help appreciated, many thanks x x x
OrcaMDDDS wrote:
Is this possible?
maybe this post by Zevoneer helps.
I don’t want to hear any of that “iTunes will let you re-download anything you’ve lost” nonsense.
it won't anyways. except or apps, you are entitled to one download only. there4 it is important to back up.
JGG -
After backing up my new iPhone with content from my old iPhone, all of my new content (photos, voice memos, etc) was deleted. How do I retreive this?
If you just bought the iPhone today, the first time you connect a new iPhone or iOS device to iTunes the first time that is used to sync with another iOS device, you are prompted to transfer the backup for the other iOS device to the new iOS device, or set up the new device as a new device.
Sounds like you did the former and if so, this did not include backing up the new iPhone first. All data on the iPhone was replaced with the backup for the iPod Touch. The data that was on the iPhone at that time is gone. -
i recently bought a new iphone 5s from UAE , but unfortunately i did not find the facetime on my new iphone, how come that i bought a new iphone with missing options , please help
Your earlier phone must have been originally intended for sale in another country and must have been purchased from somewhere other than an authorized Apple retailer. Phones that are intended to be sold in the UAE have FaceTime permanently disabled. The option is not there and cannot be made to work.
-
My daughter just synched her new iphone with her itunes account and it wiped out her contacts and pictures. Is there any way to recover them?
Sorry, unless she backup up the new phone before or is using iCloud to save the photos, the photos are gone.
Maybe you are looking for
-
Snort error since recent mysql update
Is anybody else seeing this error message when they execute snort? I'm not sure if this is my setup or a bug that needs to be reported. "snort: error while loading shared libraries: libmysqlclient.so.14: cannot open shared object file: No such file
-
Hi, Its amazing i could not able to understand that the results returned from my query Here is my query, SELECT * FROM TABLE1,TABLE2 WHRE TABLE1.ID = TABLE2.TABLE1_ID AND TABLE1.ID IN (5,4); This query returns the records of Id 4 first and then for t
-
Hi, I am using Solaris 8 with CC version : CC: Sun C++ 5.8 2005/10/13 When I am trying to build a library I get following messages. The library gets build fine, but I see lots of these messages, can you please help me find the reason for this and fix
-
Email output using Standard SAP and outlook
Can anyone provide detailed configuration tips for output determination which includes defining communication strategy, output types, output procedure and condition records? I am trying to set up email generation to customers based on billing documen
-
Hi I want to know what is the actual purpose of BIEE. As I know BIEE is only used for read only Data we can not display current situation or running data on BIEE but we can do this on BAM. And also we can use BAN for stored Data as well as running da