New Iris graphics on newest MBP 13in 2.4ghz fast enough? Any lag?

So I've been googling my heart out trying to find anyone who has bought the new MBP 13in 2.4ghz (any ram/hdd combo) and reported on this or not, and have yet to find any that didn't say "it SHOULD be totally smooth" (or the like). I bought my first MBA in September, but then found out about the October event, so I returned it in case the new MBP fit what I wanted better (although the battery life was absolutely amazing on the air).
The final decision maker for me between buying another 13in Air, or going for the 13in MBP, is if the new Iris graphics can push the retina display without lag consistently.  I read about the 2012 retina models with the intel 4000 onboard graphics lagging for people due to it not being powerful enough.  I prefer the 13in model because it's size works best for what I need, and both just fit into what I can afford, so the 15in is off the table.
Can anyone who has purchased the based MBP model comment on if the scrolling and general experience is smooth, or if they are experiencing any lag?  This will be my first macbook, and want the best experience I can get (for what I can afford obviously).  If the base MBP isn't strong enough for retina, I have no problem getting the Air with amazing battery life and still good screen quality, but I believe at 9hrs of battery and retina, the new MBP would fit the perfect balance for me of battery vs display quality. 
I went into the apple store yesterday to judge for myself if retina makes enough of a difference to make it a second option (versus just getting the Air), and the retina is beautiful.  I thought the Air's screen looked great until I played on the retina for a bit, the colors look great, and for some reason, I've very anal about the quality of my fonts, and they just looked amazing on the MBP.  The reason I have turned to the community here is that, sure I did some very minor testing, but a little while in the store going through their demos isn't quite the same as someone who has used it for days in real life.  Obviously I can return one if I'm not satisfied and get the other, but who wants to get a computer setup the way they want, only to run into problems and return it a few days later.
If this has been asked already, I apologize and if you could point me to that thread, I would be grateful.

You should also ask this in the MacBook Pro forum. This is the forum for the 13” white and black plastic MacBooks that were discontinued in 2010. You should also post this question there to increase your chances of getting an answer.
https://discussions.apple.com/community/notebooks/macbook_pro

Similar Messages

  • New Iris Graphics

    In the new MacBook Pros with retina I have heard that they do not have a dedicated video card like the old Nvidia graphics card. I want to know if this is true because I will be doing 3D rendering often in college for engineering and I want to be sure the macbook will work for that.

    The 13-inch MacBook Pro with Retina display only comes with the Intel Iris GPU, which is an integrated GPU. However, the 15-inch MacBook Pro with Retina display comes with the Intel Iris Pro GPU and with a NVIDIA GeForce GT 750M. See > http://store.apple.com/us/buy-mac/macbook-pro

  • How do I get Windows 8 to function with my Iris Graphics card?

    Hello!
    I have a late 2013 Macbook Pro retina with 8 GB of RAM and Iris graphics card.
    I am having a problem in WIndows 8 64 bit (I'm using bootcamp 5). It seems as the Windows 8 doesn't work properly with the Iris graphics card. Under display adapter information it shows only 32 MB of dedicated video memory. And I only want windows on my mac because of occasional video games. No games run with 32 MB of video memory. And it seems that windows drivers are correct because it recognises the Iris 5100 graphics card...
    I tried reinstalling bootcamp drivers and went to Intel's website for newer versions of Iris drivers but nothing helped. Is there a way to allocate more memory to the graphics card or some other solution?
    I would really appreciate help on this.
    I attached a screenshot of the display adapter information panel in windows 8.

    Dedicated is how much physical memory it have software cant change that its the same deal in osx

  • Will a macbook pro 13" late 2013 with IRIS graphics run Wicher 2, Max Payne 3, Bioshock Infinite using OSX?

    I'm looking to upgrade my old macbook (currently have a black macbook from way back when).  I wouldn't mind playing some of the games in the topic title but I'm not sure if they will play on OSX.  It says "no integrated graphics," but that's not in reference to the new IRIS cards.
    I'm thinking of this one with more RAM - http://store.apple.com/us/buy-mac/macbook-pro?product=ME865LL/A&step=config
    Game specs are on steam:  http://store.steampowered.com/app/20920/   http://store.steampowered.com/app/204100/?snr=1_7_15__13    http://store.steampowered.com/app/8870/?snr=1_7_15__13
    What's the concensus?
    Thanks!

    On low settings, yes.
    Although I do not recommend getting any MacBook pro's with Retina. They are known to have a lot of bugs and issues, software and hardware wise. For gaming, just go purchase a PC, or just a laptop for the same price, and it would run the games fine.
    Sony Vaio Pro 13 I believe would be a perfect choice.

  • Newest MBPs and their serial numbers

    Hello,
    I was wondering what the serial numbers for the newest MBP are right now. I just got a MBP, and before I open the box, I'd like to know if it is one of the newer units.
    thanks much

    The serial number is printed on the outside of the Apple packaging. I recieved a W8617 (week 17) at the end of April.

  • MacBook Pro Retina 13 with Intel Iris graphics breaks Premiere Pro CC hardware output

    Hi all,
    I just recently got a MacBook Pro 13 Retina, to use for basic editing as a secondary system to my iMac. The MacBook Pro sports a Intel Iris integrated graphics system. When I use GPU acceleration (Open CL), my Blackmagic or AJA Thunderbolt I/O outputs solid green. When I switch to software only, video plays back fine.
    I'm running Premiere Pro CC 2014 on Mac OS 10.9.4. I've read that Adobe is now optimized for Intel Iris graphics using Open CL, but why is mine not working when using external video IO?
    Anyone run into this?

    Does switching off Wifi make a difference?
    In UK and USA (and quite a few other places) you have 14 days from purchase to get a refund or replacement - no questions asked.  If there is nothing running then this does sound to be depleting rather fast.  My late 2013 13" MBP retina gives me about 10 hours using Pages (several documents open) and e-mail only.
    Get a replacement and see if you get the same problem.

  • Confusion In Intel Iris Graphics?

    Hi, I am willing to buy a new Macbook Pro but I am having confusion in choosing. First of all I would like to know what is Intel Iris Graphics? This is in new retina macbooks and Intel Iris Pro Graphics is in 15 inch models, whats the difference? I want macbook pro with a graphics card because I develop Unity3D games and unity crashes because graphics memory is not enough in view port rendering. If I buy new 13 inch macbook pro with Intel Iris Graphics , will this problem be solved? Or I need to buy macbook pro with external graphics card such as that of NVdia? Thanks.

    Intel Iris is the new integrated GPU included in the 13-inch MacBook Pro with Retina display, and it provides better performance than older Intel graphic cards.
    Instead, the 15-inch MacBook Pro with Retina display includes a slightly better Intel Iris Pro GPU. Both GPUs have got 1 GB of video memory, but if you need the best performance for your apps, go for the 15-inch MacBook Pro with Retina display, which also comes with a NVIDIA GPU that will provide you the best performance

  • Hello  I bought my wife a new MacBook Pro, in setting it up for her, I took her Time Machine external drive to migrate onto the new machine but her old MBP not only was on 10.6, it was my old machine which I was still Administrator for.  i plugged in the

    Hello
    I bought my wife a new MacBook Pro, in setting it up for her, I took her Time Machine external drive to migrate onto the new machine but her old MBP not only was on 10.6, it was my old machine which I was still Administrator for.
    i plugged in the external drive to start the migration process after entering her name and username from the old machine which gave me the options on transferring the old data over.
    I also unchecked the Administrative end that had my info hoping that ONLY her data, files, etc., would be the ones sent over to her new machine which I wanted her to be the ONLY Administrator for. All went like clockwork until the restart.
    Normally the screen should show the username and only need the password but both entries were blank, as in ‘Other’ sign in option available only. I entered her name and password, nothing….used her username and password, nothing. Used my old Administrator name and password, NOTHING!
    I tried defaulting to factory settings from the Restore feature but it directs me to notify Apple. I tried in Terminal to change the password, nothing. I tried to boot from MY external drive and it doesn’t recognize it. I tried to even use my external drive which actually has the Mavericks upgrade, nothing!
    Basically I can only get the startup screen which isn’t accepting the username/password or the Restore feature which doesn’t offer any options helpful!
    Please, how do I start from scratch and start over here? Or simply change the Administrator name and password so I can proceed with everything thats already on there? I wish I could even boot from another drive but no luck on anything!

    First, on the old machine, make your wife's account an admin one. Log into it and delete yours. Then, update the TM backup. Finally, use Internet recovery mode, ⌘⌥R, erase the HD, and restore the OS. One first boot, follow the steps outlined in Pondini's Setup New Mac guide.

  • I want to upgrade my MacBook's graphic to the brand new apple graphics, what should I do?

    I want to upgrade my MacBook's graphic to the brand new apple graphics, what should I do?
    coz mine doesn't supports CAD, or any high graphic game pls don't tell me, that ain't possible.

    unfortunately it's been 5 months .
    but that ain't sounds cool that we can't upgrade our devices or there is no promotion for an exchange :-/

  • Disply Brightness on new 15" 2.5 GHz MBP Seem Low

    Hello - I just bought a new 15" 2.5 GHz MBP, I exchanged it for the 2.4 I bought a week ago. The MBP is connected to a 23" Cinema Display, and all seems good. It seems that the brightness settings on the MBP are darker than on the 23". When I have the brightness slider in the same position for the Display and on the MBP - in the middle lets say, the MBP is noticably darker. It seems that the display was brighter (whiter whites) on the 2.4 that I had previously. Also when I slide the brightness slider all the way to the left on the MBP the screen goes completely dark, where as on the 23" Display it gets dark but I can still see my desktop. I wanted to know if this was normal for the 2.5 MBP or is my display not working properly? Thanks.

    Insert you Leopard installer disk and reboot while holding down the 'c' key. Select your language and from the Utilities menu select Disk Utility. Select your hard drive and run Repair Disk.

  • Mac book Pro and Intel Iris Graphics 6100 compatible with Adobe CC?

    Hi,
    I want to buy 13 inch Macbook pro (http://store.apple.com/us/buy-mac/macbook-pro?product=MF840LL/A&step=config#) just wanted to ask if it's graphic card (Intel Iris Graphics 6100) is compatible with Adobe Creative Cloud program like Illustrator, Photoshop and After Effects.
    I did not see it on this list: https://helpx.adobe.com/illustrator/kb/gpu-performance-preview-improvements.html
    I have lots of problems with my current laptop (Lenovo)... menus freeze from time to time and Illustrator crashes a lot.
    Thanks
    Raz

    it's possible, but unlikely.
    they'll refer you to this page: System requirements | Creative Cloud

  • I would like to buy a Macbook Pro and the model which I have selected is MGX82HN/A MB PRO DUAL CORE i5 2.6GHZ/8 GB RAM/256 GB SSD/ Iris Graphics device. would it suffice for a normal user ? Please advice.

    I would like to buy a Macbook Pro and it would be my first Mac device. I have selected this model MGX82HN/A MB PRO DUAL CORE i5 2.6GHZ/8 GB RAM/256 GB SSD/ Iris Graphics device. Please advice whether it would suffice a normal user who works in a management consulting industry with project presentation related software in work ? Thanks.

    Saptarshii wrote:
    instead of buying an Apple USB superdrive, is it safe to use third party usb optical drive ?
    Not only would it be safe but less expensive as well.  The tray loaders are deemed to be the most reliable.  Apple does not support Blueray so avoid that.
    Ciao.

  • Previously installed Aperture3 on an iMac and a MBP. I Bought a new MBA to replace the MBP and I want to install Aperture3 on the new MBA.  The installer says the serial code is invalid? What do I do?

    I previously bought Aperture 3 and installed in on an iMac and a MBP.  I just bought a new MBA to replace the MBP, but the MBA doesn't have enough memory for me to do a complete restore of the MBP on the MBA.  So I am trying to find a way to deactivate the serial code or Aperture 3 on the MBP so I can reinstall Aperture 3 on the MBA.  I have been searching forums and google and I have not been any answers.  Any help would be appreciated.  Thanks.

    How did you buy Aperture? Did you buy it from the App Store? Then you can download it again on your MBA, if you sign into the App Store.
    If you bought Aperture buy buying a licence key to unlock the trial, try if this download link for the trial version still works: if yes, you can unlock it with your serial number:
    http://appldnld.apple.com.edgesuite.net/content.info.apple.com/Aperture/061-8328 .20101020.AprE3/ApertureTrial3.1.dmg
    And if you own the boxed DVD installer , use the DVD to install Aperture on your MBA. If the installer does not work - and you get the message
    "check with the developer to make sure Aperture works with this version of Mac OS X"
    you may have a problem with an expired developer certificate (they expired mid march).
    To fix this, set the Date  in " SystemPreferences -> Date&Time" to a date well before March 2012 and run the Installer again. If that succeeds and Aperture now runs, reset the date to the current date.
    You can see your serial number in the "About" panel in the main Aperture menu bar on your MBP:
    Aperture > About Aperture.
    For the "invaldid serial number" see these links: You may have read the letters incorrectly - some are look alike, "1" or "I", "0" or "O"; your shift-lock key may be set.
    - Pro Application Replacement Serial Numbers: http://support.apple.com/kb/HT1861
    - Troubleshooting Professional Application Serial Numbers:
    http://support.apple.com/kb/TS2005
    Regards
    Léonie

  • Please help me with portfolio.I am new in graphic design.I need portfolio done immediately soon as possible otherwise my design advisor will not let me register for fall. I need 15 or 10 artworks to show.Please help me

    Please help me with portfolio.I am new in graphic design.I need portfolio done immediately soon as possible otherwise my design advisor will not let me register for fall. I need 15 or 10 artworks to show.Please help me.

    Farooq,
    If you look at the first one, you should be able to align quite easily as follows, View>Smart Guides being your friends:
    1a) ClickDrag the top flower with the Selection Tool (black arrow) so it is clear of the pointy part;
    1b) Click an empty spot on the Artboard to deselect, then ClickDrag the top flower by its bottom Anchor Point (Smart Guides say anchor when you are close enough to grab it) down to snap to the top Anchor Point on the pointy part (Smart Guides say anchor when you are close enough);
    1c) Do the same for the boroom flower.
    If you look at the third one, to get the triangles and the hexagon sized and aligned precisely, you may, creating them with stroke and no fill:
    3a) Click with the Polygon Tool and select a suitable/chosen Radius and 6 Sides, then Object>Transform>Rotate by 30 degrees (or use the Rotate option in the Transform palette), you may Object>Transform>Reset Bounding Box to have it look nicer;
    3b) Click with the Polygon Tool and select the same Radius and 3 sides, then deselect and ClickDrag the top Anchor Point to snap to the top Anchor Point of the hexagon;
    3c) Object>Transform>Rotate by 180 degrees clicking Copy, deselect, and ClickDrag the bottom Anchor Point to snap to the bottomAnchor Point of the hexagon;
    3d) Select all and Ctrl/Cmd+G to Group (for alignment purposes, you will know why if you try without grouping, see below).
    To create full symmetry, you may use circles rather than almost circular ellipses; you may:
    3d) Click with the Ellipse Tool and select a suitable/chosen Width = height;
    3e) Object>Transform>Move a copy vertically by the Height (= Width) twice (or you may Ctrl/Cmd+D to repeat), to get three circles over one another with no gaps;
    3f) Select the topmost and bottommost ones and Object>Transform>Rotate a copy by 120 degrees twice, to have all the seven circles precisley touching one another; you may Group them, but it is not necessary.
    To have everything aligned, just:
    3g) Select everything and click Vertical Align Center and Horizontal Align Center in the Align palette; you may click the pointy group or the circles ojnce more before aligning if you want to keep it in place (that will make it the key object that the other set is aligned to).
    These ways may also help you further.
    Edit: About half an hour after midnight here. High time to attend to other duties, before the sun is up.

  • Hey I'm planning to buy a Mac for college.. I game quite often and do my classworks, movies, music and browse the web.I have two options Macbook air i7 1.7ghz,4gb Macbook pro 2.4ghz i5,8gb I like the slight edge on iris graphics ..on the other hand I like

    Hey I'm planning to buy a Mac for college.. I game quite often and do my classworks, movies, music and browse the web.I have two options
    Macbook air i7 1.7ghz,4gb
    Macbook pro 2.4ghz i5,8gb
    I like the slight edge on iris graphics ..on the other hand I like the MBAs battery life.. I'm confused ..suggest me a good pick please...
    Regards....
    PS:I also heard the MBA overheats coz it lacks proper ventilation when choosing an i7 processor and also depletes the battery

    Hey I'm planning to buy a Mac for college.. I game quite often and do my classworks, movies, music and browse the web.I have two options
    Macbook air i7 1.7ghz,4gb
    Macbook pro 2.4ghz i5,8gb
    I like the slight edge on iris graphics ..on the other hand I like the MBAs battery life.. I'm confused ..suggest me a good pick please...
    Regards....
    PS:I also heard the MBA overheats coz it lacks proper ventilation when choosing an i7 processor and also depletes the battery

Maybe you are looking for

  • Does the new iPod Touch 5G have battery percentage?

    Hello, since the iPhone 4S has battery percentage with an A5 chip installed, I was wondering if the iPod Touch 5g has battery percentage. I've seen a dicussion on this same topic but i want to make sure of it. Please answer back, anyone, and please,

  • Problem with Goods Reciept Posting

    I have posted goods reciept, after that i am trying to post excise part-2. I have mentioned al the details in goods reciept, but in excise part-2, system shows credit avaialbe field blank. pls guide

  • Print to video failure

    i am trying to use the print to video setting in final cut express 4. my panasonic NV GS230 is attached to the computer but i keep getting a message saying the operation failed as my camera may be in 'local mode'

  • I tunes will not download quicktime

    i really hate apple products more than ever. bought the nano yesterday just to have the install disc freeze during the installation of this bs quicktime program, now nothing works. anybody know how the refund works?

  • Cisco Prime Decryption Settings - Import Certificate

    Hi there, I have exported a PFX from a Windows server and converted it to PEM with an unencrypted key file as pem format also. I have done this many times before for Linux based appliances with no problems so i know the format is correct.  When I go