New Kobo set up for mac

I recently purchased a Kobo reader for my wife. I have a mac OS 10.4. I found out I can get by without the app from Kobo by using the Adobe Digital edition to download the books then to my Kobo. I have already downloaded the Adobe app but need direction as to how I down load the books then get them to my reader. Can anyone help?

uhhhh, THANKS! but i guess i remain a little concerned as to how software updates and such stuff will work.
will apple "see" two machines and provide updates to both?
will other software vendors behave the same way?
would apple or others "prefer" that these machines be on some sort of "family plan"?
i was barely competent to set up wireless, will both machines be able to access the wireless printer without confusion?
will crash plan understand that they are two machines and allow content to slowly diverge over time?
forgive any dumbness in any of these questions and THANKS AGAIN for any further help or related opinions!
you are helping the nearly-elderly and it is appreciated.

Similar Messages

I have connected a new (set up for mac) seagate external HD and although file sharing is turned on the HD doesn't show up on any of the other computers on our network?????? Please help!!!!!

I have connected a new (set up for mac) seagate external HD and although file sharing is turned on the HD doesn't show up on any of the other computers on our network?????? Please help!!!!!

If the HD is setup for Mac and plugged into the AE.. with file sharing on, it should work.
Try manually mounting the disk.
In finder use go, connect to server, and type in AFP://AEName or AFP://AEIPaddress.. where you replace what I wrote with the actual name or actual IP.
Later versions of Mac OS.. like ML for some strange reason have their preferences set by default to not show network drives.. change finder preference to see everything.

New WD My Passport for Mac - questions!

Hi, everyone,
I just bought a new WD My Passport for Mac 1 TB. I am going to use it to run Time Machine and then drag and drop pertinent files that I need. From there, I am doing a clean install of Mountain Lion. I have a 2012 MacBook Pro.
I just have a few questions.
1. I read that there are big issues with this and Mavericks/Yosemite. If I ever upgrade, am I am going to lose everything or has that since been resolved?
2. How do I install it? When I read the manual, I am not sure if I am supposed to install the software (because of issues with point 1), just plug & play, how to do Time Machine, and so on.
I have another My Passport from a few years back, but don't remember how to set it up.
If someone can dumb it down for me, I'd really appreciate it. I am looking to do a Time Machine, then drag over various documents, my Music folder, iPhoto Library, Mail exports, and a few other things.

Thank you again. It's really nice there are people like you willing to give their time to help others.
An update: My Passport (not named that!) is backing up via Time Machine as we speak. Next step is to copy the files that I need over to the hard drive. I already have on another hard drive, but I figure it is better to be safe than sorry.
My question for you is basically if there is anything I should try to think about or remember to bring over. These are the things that I use regularly and what I have done on the other drive and will do here:
- Microsoft Office (mostly just Word): I will reinstall the disk, I have the activation code, and I will drag over all of my files
- iMovie: I've made one movie, and I like it, and I dragged it over and tested it on another MacBook and know it works
- iPhoto: I will drag over iPhoto Library
- Mail: I have exported all of my Mailboxes, will re-import them, and then re-set up my accounts
- iTunes: I dragged over iTunes Music from the Music > iTunes > iTunes Music folder (?)
- iCal/Notes: logging back into iCloud should do it
- Stickies: I know there is a database in the ~library ... do I just drag that over?
- Chrome: I will download it again
- my printer: I think I just go to the site to download the driver
- Airport Express: does that just work on its own?
- Dropbox: I will redownload it but, heck, I might just drop my account
- Bookmarks are exported from Chrome
- iCal is exported, just in case.
- Contacts are exported, just in case
I don't THINK there is anything else I am forgetting that I might use regularly and not realize it. Do you have any suggestions of something I might be missing? I do have an iPhone backup I might want to snag (I know it is stored elsewhere...) but I am thinking of wiping that clean, too.
Should I take note of any specific security or user settings I have (other than basics, like colors and that sort of stuff)
I am nervous that I will forget something but excited to have a nice, fresh new MacBook and fool myself into thinking I got to treat myself to something new!

I have a ipod nano 4th gen set for windows. I have a mac now how do I set it for mac

I have an iPod nano 4th gen Its set for windows I now have a Mac How do I set it for Mac? I reset it so its empty. I'm starting a new music library on my mac.

On a Mac, click here and follow the instructions.
(117387)

Design the New process set up for Materials in one physical stock plant

Hi Experts,
The requirement is one physical plant as two different logical plants in the system. The main issue is how to administrate or how to find the set up which allows one Physical warehouse in Hamburg which we have supplying two Logical warehouses in the system without having thru really physically separate the warehouses into two different ones. Materials physically will be only for one warehouse.
Requirement is for Design the New process set up for Materials in one physical stock serving plant into two different system plants.
Most of the things are pointing in the direction that order Backlogs will not be converted into new organization. We have backlogs for the material requirements for purchase orders, sales orders whatever we have in the current setup; then there will have all are new orders from the certain dates taking in the new organization set up. These backlogs are very long at least three to four years.
We would like to find some way to have the all the material requirements ending up in one basket instead of two baskets. That still be able to deliver at least in system point of view from two different baskets.
We need to do analysis on one physical stock serving plant into two different system plants that could be done either by material master data or as i understood that could be from PS side.
can any one please tell me how we can maintian this setup in the system.
Please provide your valuable inputs.
Brgds,
RK

RK,
Sorry, the creation of such an end-to-end solution is outside the scope of an online forum. Most consulting companies would send a multi-disciplinary team to perform this task, and would take several weeks to research your requirements, and come up with a prototype.
Sales order availability checking is described in SAP online help
http://help.sap.com/saphelp_erp60_sp/helpdata/en/93/744b51546011d1a7020000e829fd11/frameset.htm
I will say this. If your goal is to have two plants, with two company codes, and you wish to only procure or produce in one of the plants, then generally I would recommend using Special Procurement via Stock Transport Order (in standard SAP, Special Procurement 40). This based on a very small knowledge of your requirements. I have already cited the Sap online help for special procurement.
SAP online help for Warehouse management is at
http://help.sap.com/saphelp_erp60_sp/helpdata/en/c6/f8386f4afa11d182b90000e829fbfe/frameset.htm
As you begin to read the required topics, I am certain you will realize that this task is beyond the capability of an untrained person. I again suggest that you search for professional consulting services to assist you in this project. It will be money well spent.
I am now closing my responses to this thread. Good luck in your project!
Best Regards,
DB49

How can I create a new folder in Word for Mac ?

How can I create a new folder in Word for Mac?

You don't do this in Word. You do it in the OS X Finder.
All you need do in Word is open the file, then select Save As from Word's File menu. Change the destination to your new folder then click on the Save button.
The Finder method is much faster if you have a number of files you want to move. Just remember that to open those moved files in Word, you will have to change the directory from which you will open those files.

New CS6 on disk for Mac will not take my valid serial number; do I need to register the product before it will accept serial number and load on my Mac Book Pro?

New CS6 on disk for Mac will not take my valid serial number; do I need to register the product before it will accept serial number and load on my Mac Book Pro?

Hi Erwin,
Please go through the below forum link and check.
https://forums.adobe.com/thread/1079210
Regards,
Anand

I cannot see my new WD My Passport for Mac hardrive in finder, it has USB 3, compatible withUSB 2. I can see it in disk utility

My new WD My Passport for mac,1 Tb harddrive in finder. it's there initially then disapears, I can see it in disk utilities and in the systrm report, so I think it is moounting, but difficult to access and to ejet when not visible in the finder sidebar. This has a USB 3 connection, whic i states is also compatible with USB 2

Check the format of the drive when in disk utility. It should be
Mac OS Extended (Journaled)
A powererd external usb hub can help when the computer's usb port is marginal.

Design the New process set up for Materials in one physical stock serving p

Hi Experts,
The requirement is one physical plant as two different logical plants in the system. The main issue is how to administrate or how to find the set up which allows one Physical warehouse in Hamburg which we have supplying two Logical warehouses in the system without having thru really physically separate the warehouses into two different ones. Materials physically will be only for one warehouse.
Most of the things are pointing in the direction that order Backlogs will not be converted into new organization. We have backlogs for the material requirements for purchase orders, sales orders whatever we have in the current setup; then there will have all are new orders from the certain dates taking in the new organization set up. These backlogs are very long at least three to four years.
We would like to find some way to have the all the material requirements ending up in one basket instead of two baskets. That still be able to deliver at least in system point of view from two different baskets.
We need to do analysis on one physical stock serving plant into two different system plants that could be done either by material master data or as i understood that could be from PS side.
can any one please tell me how we can maintian this setup in the system.
Please provide your valuable inputs.
Brgds,
RK
Note : Duplicate post locked this thread
Edited by: Jeyakanthan A on Jun 3, 2011 2:29 PM

RK,
Sorry, the creation of such an end-to-end solution is outside the scope of an online forum. Most consulting companies would send a multi-disciplinary team to perform this task, and would take several weeks to research your requirements, and come up with a prototype.
Sales order availability checking is described in SAP online help
http://help.sap.com/saphelp_erp60_sp/helpdata/en/93/744b51546011d1a7020000e829fd11/frameset.htm
I will say this. If your goal is to have two plants, with two company codes, and you wish to only procure or produce in one of the plants, then generally I would recommend using Special Procurement via Stock Transport Order (in standard SAP, Special Procurement 40). This based on a very small knowledge of your requirements. I have already cited the Sap online help for special procurement.
SAP online help for Warehouse management is at
http://help.sap.com/saphelp_erp60_sp/helpdata/en/c6/f8386f4afa11d182b90000e829fbfe/frameset.htm
As you begin to read the required topics, I am certain you will realize that this task is beyond the capability of an untrained person. I again suggest that you search for professional consulting services to assist you in this project. It will be money well spent.
I am now closing my responses to this thread. Good luck in your project!
Best Regards,
DB49

Need new ink jet printer for Mac G4 with classic

I've searching for a new color inkjet printer for my G4 with Classic and have found only 1 by Epson, the R800. However, I'm getting different answers from various techs. One said I just need to get a print server. A tech at Epson says it probably won't work for my classic mode if the OS 9 software is booted up with an OS 10 driver. I don't know the answer to this or exactly what it means!!! Most of my printing would be done with OS 9 software. I have been using an HP laser printer and an HP color inkjet on all 3 of my networked Macs with no problem. Can anyone tell me if the Epson R800 will work? Thanks, Ann C

I don't have it, but the specification page says
+Windows 98SE/2000/Me/XP, Mac 8.6-9.2, OSX 10.1.3 or later+
http://www.epson.com/cgi-bin/Store/consumer/consDetail.jsp?BV_UseBVCookie=yes&in foType=Specs&oid=37472319&category=Products
Plus, there is a driver for Mac OS 9 available for download here
http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid= 30501&prodoid=37472319&infoType=Downloads&platform=All
So I see no reason why it would not work.

10.1 new version of itunes for mac os x 10.4.11

i cannot download the new version of itunes. it says it only applys for mac os x 10.5. how in the world will i use my NEW ipod if i can not download the new itunes? someone please help!

Quote>>>"Apples business model is highly successful.
The requirements for the product are printed right on the box. "<<<
What kind of Red Herring is it to toss a remark in about Apple's business model being highly successful when we are all struggling to solve a real problem created by Apple's Business model.
I received my Touch as a gift. Should I shake my finger at the kind person who bought me that item knowing that I have iTunes installed? Should they have called me and asked what versions I was running? C'mon.
The question still remains, what can I do to upgrade enough to connect the G4 Touch without having to junk a perfectly operating PPC G5 iMac?
I feel betrayed by this "look for the tiny print" caveat.
--GG

HT1770 I am setting up new Seagate GOFlex Pro for Mac for Time Machine. Backup stops at 45.2MB. A customer service of the Seagate said it is Apple's issue. Please help! Shuichi

Backup stops at 45.2MB. A customer service says that it is Apple's issue. Please help. Shuichi

Event store UUIDs don't match naming your internal HD or any other drive/partition being backed-up. Time Machine can't be sure the OSX internal log of file changes that it normally uses is correct.
This happens in the following circumstances:
•The first backup of a disk, or to a new location
•After booting from your install disc, Recovery HD, or a different OSX volume (usually)
•A full restore
•Certain hardware repairs (e.g., new internal disk or logic board)
•Removal of large exclusions
•A very large volume of changes (especially an OSX update)
•An improper shutdown of your Mac, or improper disconnection or power loss on the Time Machine drive
•If it's an external HD, an improper shutdown or disconnection of the drive
•A failed or cancelled backup
•Many days without a backup
It usually causes a lengthy deep scan/traversal (below), so if you see it frequently, you need to figure out why it's happening.
http://pondini.org/TM/A6.html
Might also have a look at...
/Library/Logs/CrashReporter/backupd_2013-11-15-164711_NAME-nokonpyuta-2.crash

Multi-user, networked set-up for Macs - ideas wanted!

Let me say at the outset that my preference would be to wait for the new Mac Pro Towers to come out. Having said that, however, I'm looking for some ideas on setting up some sort of network environment for editing with either iMacs or Mac Minis.
I run a University Lab with 4 student work stations and 3 office editing suites. All are connected to the network via gigabit. In the past, we successfully used the FCP Server as an edit-in-place device. Well... it was successful at *that* anyway We shoot long-format, multicam, HD AVCHD (and we want to edit it natively). Typically 4 or 5 two-camera, hour long shoots a week. We also do occassional P2 work (2 or 3 camera shoots), DSLR (short pieces) and several three-camera (or more) multicam theater productions (2-4 hours each - AVCHD).
Does anyone have recommendations for a fast and reliable network solution (ideally over ethernet unless Thunderbolt would be a better solution) that would support, say, 4 simultaneous editors? For the moment, let's say price is not as much of an issue as speed and reliablility. I already have a 16TB network for medium-term storage of finished archived pieces and raw footage. I'm looking for something smaller (4 TB), for working projects over the course of a semester. TPTB would like to have it stored in the Server Room (which is why I said Ethernet over Thunderbolt).
As to computers... I'm no fan of iMacs (I prefer Minis) but the highest end one seems to have an Adobe supported graphics card. As far as I can tell the minis don't. Both iMacs and Minis have Thunderbolt but I really **really** don't want the nightmare of multiple external harddrives (been there, done that, hated it!). Does anyone have experience using Premiere on either a mini or iMac?
Any other thoughts would be greatly appreciated. This isn't the route I want to go, but the money is available now and the new Mac Towers are not.
Thanks
Allynn

I have NO idea if these "exact problems" pertain to Macs, since I think most of these discussions are about Windows... but, some reading (not all PPro, but I put all the links I have saved, just for general information)
-see #3 http://forums.adobe.com/thread/771151
-you may NOT "map" your My Documents folder to a network drive
-you MUST give all users administrator accounts to use Premiere
-and especially Encore dual layer http://forums.adobe.com/thread/969395
-#5 Server 2008 is UNsupported http://forums.adobe.com/thread/851602
-a work around, of sorts http://forums.adobe.com/thread/957523
-and not on a "domain" http://forums.adobe.com/thread/858977
-also PreEl see #5 http://forums.adobe.com/thread/1017199
-more PreEl problem http://forums.adobe.com/thread/975117
The solution... some day... may be at this link
Adobe Anywhere http://www.adobe.com/products/adobeanywhere.html

External Hard Drive set up for Mac and PC

Hi there.
I have a Lacie 1000GB external hard drive conected to Power Book Pro. I don't know much about it but was wondering if I could partition some of it off for my PC back up. As my Powerbook is for buisness (editing) I try and keep it away from emails and things, which I use me PC for. When I first purchased the Lacie HD, after setting it up with the mac I then tried to connect it to the PC to do a general back up of documents, etc. but it wouldn't allow it. Can anyone help with this? Sorry the info is a little vague...
Adam

You need to have a partition for OS X and one for your PC. Partitioning will erase your drive.
Open disk utility in the utilities folder in finder. Choose your external drive.
Choose partition and then under volume scheme choose 2 partitions. Pick the size of the partitions by either dragging the center bar with the dot on it or type in the size. Pick the partition you want to be your mac partition then choose option and pick guid partition table. For format choose mac os extended journaled. Pick a name for this partition
Now pick the other partition and under option choose master boot record. Under format choose MS-DOS file system. Choose a name for this partition.
Now in the right hand corner choose partition. It will take a while so be patient.

How do I format a new external Hard drive for Mac?

Simple question I know for many of you out there but I could do with some advice as I have never done this before. I would like to buy a new external hard drive to store my music and photos on. I will get one with firewire and usb2 connectivity.Could someone walk me through the steps needed to format and prepare a hard drive for use with my Macbook (if it is not already Mac formatted). Will any brand of hard drive work with Mac or are some better than others?

In addition to what Templeto Peck said, make sure that you select the formating to be OSX Extended.
As far as the best esternal drive, type into the "Search Discussion" box: Best external hard drive. This will bring you to several previouslly posted threads that discuss quite thoroughly your question. The following is extracted from one thread:
The best drives are those that use the Oxford 911 chipset. I like the Mercury Elite Pro drives from OWC, but there are plenty of others that use the same chipset.

New Kobo set up for mac

Similar Messages

Maybe you are looking for