"New lifecycle definition" fails with "Unexpected error"

This problem has been previously posted without resolution.
Select "Lifecycle Definitions -> New lifecycle definition".
Error:
"Unexpected error, unable to find item name at application or page level.
A severe error has occurred. Possible causes may include moving directly to a page using the browser history or Back key, multiple users attempting to change the same data or an application defect. Please visit the Support page under the Help Tab to report the error.
Press here to return to the parent page"
A resolution to this would be apprciated.
Please note this problem is based on APEX 4. About to retest on APEX 3.2 to see if it is happening there.
Edited by: user774105 on 7/03/2011 17:26
Have back ported to 3.2 and the problem no longer occurs. Not sure what has changed between versions, but there are a number of links in the Assitant that fail with the above error in APEX 4.
Edited by: user774105 on 7/03/2011 19:45

Hi
I have also encounter the same error . Currently i have apex version 4.
User: SYSTEM
Unexpected error, unable to find item name at application or page level.
A severe error has occurred. Possible causes may include moving directly to a page using the browser history or Back key, multiple users attempting to change the same data or an application defect. Please visit the Support page under the Help Tab to report the error.
Press here to return to the parent page
Any solution for this with apex version 4
Thanks and Regards
Ganesan Sivaraman

Similar Messages

Atempt to start OMS for Grid Control 11g fails with - Unexpected error occu

Hello,
I am running Grid Control 11g.
Repository DB is 11.2.0.1
Both the Grid Control and DB server are running in same machine - redhat 5.
When trying to start the oms, this fails with the below error:
Oracle Enterprise Manager 11g Release 1 Grid Control
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
Starting WebTier...
WebTier Successfully Started
Starting Oracle Management Server...
Oracle Management Server is not functioning because of the following reason:
Unexpected error occurred. Check error and log files.
The emctl.log shows the following error which I am unable to debug:
2011-09-13 11:20:05,619 [main] DEBUG oms.StatusOMSCmd processStatusOMS.138 - HTTP port in emgc property file: 7202
2011-09-13 11:20:05,620 [main] DEBUG oms.StatusOMSCmd processStatusOMS.139 - HTTPS port in emgc property file: 7301
2011-09-13 11:20:05,620 [main] DEBUG oms.StatusOMSCmd processStatusOMS.155 - Using http port.
2011-09-13 11:20:05,620 [main] DEBUG oms.StatusOMSCmd processStatusOMS.195 - Attempting to connect to http://<host>.<domain>:7202/em/console/logon/logon
2011-09-13 11:23:05,596 [main] ERROR oms.StatusOMSCmd processStatusOMS.239 - Read timed out
java.net.SocketTimeoutException: Read timed out
at java.net.SocketInputStream.socketRead0(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:129)
at HTTPClient.BufferedInputStream.fillBuff(BufferedInputStream.java:206)
at HTTPClient.BufferedInputStream.read(BufferedInputStream.java:126)
at HTTPClient.StreamDemultiplexor.read(StreamDemultiplexor.java:348)
at HTTPClient.RespInputStream.read(RespInputStream.java:147)
at HTTPClient.RespInputStream.read(RespInputStream.java:108)
at HTTPClient.Response.readResponseHeaders(Response.java:1107)
at HTTPClient.Response.getHeaders(Response.java:832)
at HTTPClient.Response.getStatusCode(Response.java:331)
at HTTPClient.RetryModule.responsePhase1Handler(RetryModule.java:92)
at HTTPClient.HTTPResponse.handleResponseImpl(HTTPResponse.java:872)
at HTTPClient.HTTPResponse.access$000(HTTPResponse.java:62)
at HTTPClient.HTTPResponse$2.run(HTTPResponse.java:839)
at HTTPClient.HTTPResponse$2.run(HTTPResponse.java:837)
at HTTPClient.HttpClientConfiguration.doAction(HttpClientConfiguration.java:666)
at HTTPClient.HTTPResponse.handleResponse(HTTPResponse.java:837)
at HTTPClient.HTTPResponse.getStatusCode(HTTPResponse.java:242)
at oracle.sysman.emctl.oms.StatusOMSCmd.processStatusOMS(StatusOMSCmd.java:199)
at oracle.sysman.emctl.wls.OMSController.statusOMS(OMSController.java:867)
at oracle.sysman.emctl.wls.OMSController.startOMS(OMSController.java:606)
at oracle.sysman.emctl.wls.OMSController.main(OMSController.java:213)
2011-09-13 11:23:05,597 [main] INFO wls.OMSController statusOMS.950 - statusOMS finished with result: 9
In emgc.properties, I have MSPORT=7202.
I have used the notes in Metalink 1287904.1, but without resolution.
I am able to connect with sqlplus, with user sysman, without issues. There are no invalid objects under sysman.
emoms.trc shows the following:
2011-09-11 15:51:53,160 [JobWorker 22356:Thread-108] WARN jdbc.ConnectionCache _getConnection.353 - Invalid or Stale Connection found in the Connection Cache
java.sql.SQLException: Invalid or Stale Connection found in the Connection Cache
Thank you for support.
Regards,
Horia
Edited by: horia.berca on Sep 13, 2011 5:29 AM
Edited by: horia.berca on Sep 13, 2011 5:32 AM
Edited by: horia.berca on Sep 13, 2011 5:35 AM
Edited by: horia.berca on Sep 13, 2011 5:45 AM

Hello again;
Check the solution in this: ( and note the multiple versions of oracle it covers )
UNABLE TO FIND GRID INFRASTRUCTURE LISTENER (Doc ID 1483234.1)
Best Regards
mseberg

Excel fails with unexpected error unless vba editor opened before running

i have an excel macro which fails with an unexpected error unless i open vba editor first
EXACT MESSAGE IS
"MICROSOFT EXCEL HAS ENCOUNTERED A PROBLEM AND NEEDS TO CLOSE, WE ARE SORRY FOR THE INCONVENIENCE"
I HAVE SENT AN ERROR REPORT many times, no response
this prevents running as auto_open
why?
what initialization takes place by opening vba editor that does not take place with out doing so?

As this is unusual behavior (not seen by most of us Excel users), and you indicate that it happens on multiple PCs (so it isn't something corrupt on just one machine), it seems likely that it is something specific to the code you are trying to run.
It might be helpful if you post your code, and specifically where you are placing the code (personal.xlsb, a regular module, a class module, behind a specific worksheet, or behind the "this workbook" object).
Also, how are you triggering the macro- are you running it from the macro dialogue box, a custom worksheet button, a userform, or something else?

Creating custom LAF - failing with 'unexpected error'

Hi,
I'm trying to create a custom LAF based on the simple.desktop. I follow the steps for 'Create Look and Feel' and enter -
Name: test-desktop
Family: test
Description: Test LAF
Base Look and Feel: simple.desktop
click Next and the 'Customise Styles and Icons' page is displayed.
When I try and make any changes, or just go straight through to the 'Submit' I get an Error Page. Text is '
You have encountered an unexpected error. Please contact the System Administrator for assistance. '
Can anybody suggest what might be going wrong?
Thanks,
Paul.

My view is yes as I need the custom LAF for my OA Framework pages and I couldn't see a more appropriate forum.
If there is one, please suggest.
Thanks,
Paul.

DB 7.8 Restart fails with SQL error -9407, unexpected error 3

Hello,
MaxDB Instance (7.8.01.18) fails to restart with the error
"SQL error -9407 System error: unexpected error 3
Internal errorcode 6433 "system_error" 20017, Restart Filesystem failed with
'System error unexpected error'
9, File directory restart failed; error '3'
31, Error linking entry to parent; file no '000000004066',
parent file no '000000000000000000033D',
file type 'IndexFile', error '11'
We had the problem "[-8]: Execution failed, parse again" with one table,
then we tried to restart the database. Now it doesn't come up any more.
Is there another possibility instead of a recovery?
Greetings
Ulrich

Your problem description sounds very similar to the following error:
PTS1237652:
"Appearance:
Restart fails with file directory corruption:
31,Error linking entry to parent; file no 'xxx', parent file no 'yyy', file type 'IndexFile', error '11'
Preconditions and circumstances:
During a recreate index operation the index was dropped and recreated manually.
Workaround:
None. The system must be recovered to the time just before the index was recreated."
Please note that this is one of those issues that has only been fixed with 7.8.02. 7.8.02 is currently in customer testing, if anyone wants to join, just open a CSS message and test this version before we make it generally available for download.
Best regards,
Thorsten

Itunes new update failed with an error R6034

Itunes update failed with several error R6034

Follow the directions of tt2 in: https://discussions.apple.com/thread/5822086

External Drive Disk Erase Failed with the Error Input/Output Error

I have 2 hard drives in an external FW800 enclosure that I am unable to format. When I go to initialize the drives in Disk Utility, I get the following error message: "Disk Erase failed with the error: Input/output error."
The drives show up in Disk Utility, but I can't repair them (that option is grayed out). Disk Utility correctly ID's the manufacturer of the drives (Maxtor), their size (200gb each), so it's obviously seeing that the drives are there. But it won't let me format them.
The drives are new, by the way; they don't have any data/files on them. I have Disk Warrior, but the drives don't show up there to be repaired -- probably because they aren't formatted yet.
After looking at other posts, I tried switching the jumper settings around on the drives -- from Master/Slave to cable select and back again, but it didn't help. I also tried doing a zero erase (even though the drives are new), zapping the PRAM -- again, no help.
One question I had is whether this could be a bad FW800 cable? The cable is new -- it came with the enclosure, which is an OWC Dual FW 800 enclosure. Other than that, does anyone have any other thoughts about what's causing this? Any help would be greatly appreciated.
Matthew

SOLUTION!!!!
I had the exact same problem. I have the original 20 GB hard drive that came in my Powerbook G4 550MHz and a couple of years ago I traded up for a 60 GB drive and bought a FW/USB enclosure for my original drive to use it to backup my important files. I hadn't backed up in over a year (shame on me!) and I decided maybe I should erase the drive and start from scratch. It was connected via USB.
At that point DiskUtility gave me the exact same Input/Output error. I tried partitioning the drive into 1 or more partitions but came up with the same error. I couldn't figure out what was wrong so I decided to startup in OS 9.2.2, I did that and let it start up, then plugged in the hard drive and it gave me the standard "This disk is unrecognizable, do you want to eject or erase?" so I clicked Initalize. It worked!
Just make sure you choose the MacOS Extended option when initializing out of OS 9 (instead of the MacOS Standard option) so it can be read and viewed in OS X.
If your computer is too new to be able to boot from an OS 9 folder on your drive or an OS 9 CD, then see if a friend or a local library has older computers that are running OS 9 or can boot from it. If not let me know and you can send me your drive and I'll reformat it.
Kind of crazy...I haven't used the OS 9 partition on my HD in YEARS...was even thinking about erasing it since I don't use any Classic applications anymore...good thing I didn't!
Nick
Powerbook G4 550Mhz Mac OS X (10.4.6)

Transfer ID failed with LUM errors

I have 4 netware servers to migrate to OES2. One was completed successfully using Transfer id a few weeks ago. This weekend I attempted another.
The last part of the transfer id failed with LUM errors that it couldnt access lum objects admingroup, www etc. As we have had one successful migration these objects do exist in the tree and are lum enabled. The /etc/nam.conf was modified prior to starting the transfer id to point to the ldap server with the master replica. I did create too many projects which I think caused me the lum errors which I couldn't get past. With the source server turned off I followed a TID dated 2009 for this LUM error and modified the unix object which had been created to be members of the groups it required, (luckily I had the previously migrated server unix object to compare to) quit the migration software and rebooted the server and then ran ndsrepair. No errors. I did not migrate any services.
Further investigation revealed errors relating to obtaining the SSLCert but it has not expired and despite the cant get it messages the files .der and .pem appeared in the correct folders on the target server. I did copy the .der file to the required location naming it with the ipaddress as per manual instructions. The target server now has a case of dual identity. The nss volumes are mounted ok and the users can map drives using the source server name but the Suse Linux server still thinks that its the pre-migration server when I run a terminal session. Ifconfig shows the correct source server ip. Consoleone is another story. The volume objects are the old ones and the new ones with pools are not showing. From the users viewpoint it works.
Before I do more damage can someone please point me in the right direction. The target name did change to the source before the restart so therefore I should just need to do the hostname rename manually. Should I start at step 7 in the manual instructions in an attempt to fix this server or should I abandon it and start again?

$(UKevin
This defect will make into the next OES2SP2 Patch (post September). We didn't have enough time for QA to regress the fix for September Patch.
-Ramesh
>>>
From:
kjhurni<[email protected]>
To:
novell.support.open-enterprise-server.migration
Date:
10/05/2010 09:06 PM
Subject:
Re: Transfer ID failed with LUM errors
Great, thanks!
As I mentioned previously, we DID find a bug about 3 weeks ago with LUM
repairfailing during the "group" (admingroup). We do have a field
patch for it, but obviously it's not made it into the channel yet.
So if you DO still have that problem, you should probably ask for the
patch (it's one file).
The defect #635574
Should help them reference the bug and get the patch for you.
I'm not sure when it will be released into the patch channel.
Not to say this fixes any and all LUM problems but since we have that
patch, we've not had any issues with the remaining OES2 SP2 64-bit
servers we've done with ID Transfer.
kjhurni
kjhurni's Profile: http://forums.novell.com/member.php?userid=734
View this thread: http://forums.novell.com/showthread.php?t=422454

SCCM 2012 Export Task Sequence fails with generic error message

We have a complex task sequence comprising of more than 50 applications\packages, 1975 drivers, 18 driver packages etc etc. Its long, it's big and it will not export with it's content.
We have several environments for development test and live. I am attempting to export the primary task sequence with all it's dependencies from live so that I can port it over to a new development environment.
I can export the zip file without content and it comes to 92Mb in size. The entire task sequence software set is 50Gb+. When I attempt to export with all dependencies and content the process gets about 60% of the way through and fails with the error
"Error: The filename, directory name, or volume label syntax is incorrect"
Googling the error roughly defines the problem as 'the export process cannot access the defined source path for one of the dependant items'
I wrote a PowerShell script that looks as every application, package, driver, driver package, boot image, os image and software update package in the entire SCCM software library and verifies that each and every package has a valid UNC source directory
that can be reached using test-path.
I also wrote another tool that parsed the entire source software library on the server looking for permissions errors (permissions on the structure set at a directory level rather than inherited), directories that were too long, inaccessible or otherwise
blocked, nothing was found.
It will take a very long time to go through and check each and every dependency by hand - time I do not have at present.
I looked in the TaskSequenceProvider.log as that is supposed to contain messages from the export process and found the messages in there far too high a level to use
=======================
<![LOG[Setting status complete: status code = 0x0; ]LOG]!><time="13:00:41.161-60" date="08-26-2014" component="TaskSequenceProvider" context="" type="1" thread="4168" file="exterror.cpp:128">
<![LOG[[PID: 3500] Invoking method SMS_TaskSequence.ExportXml]LOG]!><time="13:00:42.339-60" date="08-26-2014" component="TaskSequenceProvider" context="" type="1" thread="4168" file="wmiprovider.cpp:333">
<![LOG[[PID: 3500] Done with method SMS_TaskSequence.ExportXml]LOG]!><time="13:00:42.341-60" date="08-26-2014" component="TaskSequenceProvider" context="" type="1" thread="4168" file="wmiprovider.cpp:352">
<![LOG[Setting status complete: status code = 0x0; ]LOG]!><time="13:00:42.341-60" date="08-26-2014" component="TaskSequenceProvider" context="" type="1" thread="4168" file="exterror.cpp:128">
<![LOG[[1AFF658 PID:3500] Received shutdown request from WMI]LOG]!><time="13:01:36.036-60" date="08-26-2014" component="TaskSequenceProvider" context="" type="1" thread="5592" file="wmiprovider.cpp:399">
<![LOG[[1AFF658 PID:3500] Initializing provider for namespace root\sms\site_P01]LOG]!><time="13:02:36.550-60" date="08-26-2014" component="TaskSequenceProvider" context="" type="1" thread="7068"
file="wmiprovider.cpp:90">
<![LOG[[1AFF658 PID:3500] Initialization of provider for namespace root\sms\site_P01 succeeded]LOG]!><time="13:02:36.551-60" date="08-26-2014" component="TaskSequenceProvider" context="" type="1"
thread="7068" file="wmiprovider.cpp:107">
<![LOG[[PID: 3500] Invoking method SMS_TaskSequence.LoadFromXml]LOG]!><time="13:02:36.554-60" date="08-26-2014" component="TaskSequenceProvider" context="" type="1" thread="7068" file="wmiprovider.cpp:333">
<![LOG[[PID: 3500] Done with method SMS_TaskSequence.LoadFromXml]LOG]!><time="13:02:36.558-60" date="08-26-2014" component="TaskSequenceProvider" context="" type="1" thread="7068" file="wmiprovider.cpp:352">
<![LOG[Setting status complete: status code = 0x0; ]LOG]!><time="13:02:36.559-60" date="08-26-2014" component="TaskSequenceProvider" context="" type="1" thread="7068" file="exterror.cpp:128">
<![LOG[[PID: 3500] Invoking method SMS_TaskSequence.ExportXml]LOG]!><time="13:03:05.428-60" date="08-26-2014" component="TaskSequenceProvider" context="" type="1" thread="7068" file="wmiprovider.cpp:333">
<![LOG[[PID: 3500] Done with method SMS_TaskSequence.ExportXml]LOG]!><time="13:03:05.431-60" date="08-26-2014" component="TaskSequenceProvider" context="" type="1" thread="7068" file="wmiprovider.cpp:352">
<![LOG[Setting status complete: status code = 0x0; ]LOG]!><time="13:03:05.431-60" date="08-26-2014" component="TaskSequenceProvider" context="" type="1" thread="7068" file="exterror.cpp:128">
<![LOG[[1AFF658 PID:3500] Received shutdown request from WMI]LOG]!><time="13:03:36.369-60" date="08-26-2014" component="TaskSequenceProvider" context="" type="1" thread="7068" file="wmiprovider.cpp:399">
====================
Is there any way of increasing the log verbosity? I need to see what item is causing the export to fail.
Is there another log containing the information about the export & what it is doing?
All out builds that use the task sequence complete successfully, we can edit the sequence fine, make changes etc. so no internal corruption we can find.
Any ideas?

Torsten, smsprov.log did indeed prove useful, I could see every package as it was validated. Unfortunately the log was wrapping about every 4 minutes and it takes 3+ hours for the task sequence to reach the fail point so I still cannot see the offending
package as it wraps before I can get to the log.
I will increase the size of the log and see if I can maintain some details to investigate.
There was nothing of note in the event logs, certainly nothing leading me to suspect that WMI might be reaching its limits.
I will keep looking for the cause and will post here when I find it <= positive thinking :)

IMP-00017: following statement failed with ORACLE error 1276

i have exported the full database without rows from live database and tried to import it into training database.
both use ASM file system.i have precreated tablespace in training database.
but im getting the error IMP-00017: following statement failed with ORACLE error 1276.
it tries to create tablesapce and datafile on live ASM location rather than creating it on training database ASM location.
live database asm location is WEBD and training database is at TRAIND.
it tries to import on WEBD RATHER THAN TRAIND and throws the error.
any help is appreciated.i have googled it and cant find anything helpful.
Im bit new to DBA stuff.
is there anyway to import and export data in ASM file system?
Thanks

When datapump exports the tablespace information, all it knows about is the currently location of your datafiles. Let's take a simple example. Let's say you have tablespace foo with a file called foo.dbf and it lives in a windows directory c: if you are now trying to import that into a linux box, Data Pump does not know that. All it knows is that it needs to create the tablespace data file in c:. If you are changing the locations of the datafiles, you need to use remap_datafile=old_datafile:new_datafile ... in your impdp command. Or, precreate them and use exclude=tablespace. The old_datafile and new_datafile need to be the complete path.
Hope this helps.
Dean

Urgent:IMP-00017: following statement failed with ORACLE error 3113

OS:HP_UX 11i
Oracle 9.2.0.3.0
when import tablespace metadata,
comand is "imp \'sys/sysadmin AS sysdba\' TRANSPORT_TABLESPACE=y DATAFILES='/oradata/data2/
B.dbf' TABLESPACES=A FILE=A.dmp IGNORE=Y LOG=./log/import.log"
the error occurs as followed:
Export file created by EXPORT:V09.02.00 via conventional path
About to import transportable tablespace(s) metadata...
import done in US7ASCII character set and AL16UTF16 NCHAR character set
import server uses WE8ISO8859P1 character set (possible charset conversion)
. importing SYS's objects into SYS
IMP-00017: following statement failed with ORACLE error 3113:
"BEGIN sys.dbms_plugts.beginImport ('9.2.0.3.0',31,'2000',NULL,'NULL',3626"
"7,35051,1); END;"
IMP-00003: ORACLE error 3113 encountered
ORA-03113: end-of-file on communication channel
IMP-00000: Import terminated unsuccessfully
export is in same enviorment, the successful informantion below:
exp \'sys/sysadmin AS sysdba\' TRANSPORT_TABLESPACE=y TABLESPACES=A FILE=A.dmp
LOG=./log/export.log
log file:
Export done in US7ASCII character set and AL16UTF16 NCHAR character set
server uses WE8ISO8859P1 character set (possible charset conversion)
Note: table data (rows) will not be exported
About to export transportable tablespace metadata...
For tablespace A ...
. exporting cluster definitions
. exporting table definitions
. . exporting table A
. exporting referential integrity constraints
. exporting triggers
. end transportable tablespace metadata export
Export terminated successfully without warnings.

I do it,but the same error message.
export message:
Connected to: Oracle9i Enterprise Edition Release 9.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.3.0 - Production
Export done in WE8ISO8859P1 character set and AL16UTF16 NCHAR character set
Note: table data (rows) will not be exported
About to export transportable tablespace metadata...
For tablespace A ...
. exporting cluster definitions
. exporting table definitions
. . exporting table A
. exporting referential integrity constraints
. exporting triggers
. end transportable tablespace metadata export
Export terminated successfully without warnings.
Import Message:
Export file created by EXPORT:V09.02.00 via conventional path
About to import transportable tablespace(s) metadata...
import done in WE8ISO8859P1 character set and AL16UTF16 NCHAR character set
. importing SYS's objects into SYS
IMP-00017: following statement failed with ORACLE error 3113:
"BEGIN sys.dbms_plugts.beginImport ('9.2.0.3.0',31,'2000',NULL,'NULL',3627"
"7,36451,1); END;"
IMP-00003: ORACLE error 3113 encountered
ORA-03113: end-of-file on communication channel
IMP-00000: Import terminated unsuccessfully

*** ERROR = CONNECT failed with SQL error '12154' after Oracle Upgrade

Hello Experts,
Recently I upgraded my oracle database from 11.2.0.3 to 11.2.0.4.The upgrade completed successfully but I am unable to start the instance.
R3trans -d failing with the error--
OCIServerAttach(OCI_DEFAULT) failed with -1=OCI_ERROR
OCIServerAttach(OCI_DEFAULT) failed with SQL error 12154:
ORA-12154: TNS:could not resolve the connect identifier specified
OCIServerAttach(con=0, svc=069C1630): Error 12154 attaching new srv=069C17D0
OCIHandleFree(con=0): Server handle srv=069C17D0 freed.
server_detach(con=0, svc=069C1630; srv=NULL, stale=2)
OCIHandleFree(con=0): Service svc=069C1630 freed (i=1).
*** ERROR => CONNECT failed with SQL error '12154'
-->oci_get_errmsg (con=0, rc=12154)
OCIErrorGet() -> SQL error code: 12154; buflen=66
OCIErrorGet(): error text ->
ORA-12154: TNS:could not resolve the connect identifier specified
ocica() -> SQL error code 12154,12154
DbSlConnect(con=0) -> orc=12154, rc=99=DBSL_ERR_DB
***LOG BY2=>sql error 12154 performing CON
***LOG BY0=>ORA-12154: TNS:could not resolve the connect identifier specified
I have checked listener is up and running properly.Entry is maintained in tnsnames.ora.
Also kernel is upgraded with latest path.Curent kernel version--742
Please suggest on the mentioned error.I am attaching the logs here.Thanks in advance.
Best Regards,
Debaditya

Hi Debadiya
Kindly check this SAP Notes
1204916 - Error: "ORA-12154" when connecting to Oracle from a Windows 64-bit platform
2153975 - Database connectivity fails with ORA-12154
556232 - Environment settings for R/3/Oracle on Windows
443867 - ORA-12154 Collective SAP note
BR
SS

CONNECT failed with sql error '1017'

Hello,
nus650pa:dv8adm 23% more trans.log
4 ETW000 R3trans version 6.05 (release 46D - 12.07.06 - 16:40:00).
4 ETW000 ===============================================
4 ETW000
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 date&time   : 14.08.2014 - 16:58:18
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [developertra,00000] Thu Aug 14 16:58:19 2014                          170924 0.170924
4 ETW000 [developertra,00000] db_con_init called                                  1225 0.172149
4 ETW000 [developertra,00000] create_con (con_name=R/3)                          22426 0.194575
4 ETW000 [developertra,00000] Loading DB library '/usr/sap/DV8/SYS/exe/run/dboraslib.so' ...
4 ETW000                                                                             136 0.194711
4 ETW000 [developertra,00000] load shared library (/usr/sap/DV8/SYS/exe/run/dboraslib.so), hdl 0
4 ETW000                                                                          369207 0.563918
4 ETW000 [developertra,00000] Library '/usr/sap/DV8/SYS/exe/run/dboraslib.so' loaded
4 ETW000                                                                             174 0.564092
4 ETW000 [developertra,00000] function DbSlExpFuns loaded from library /usr/sap/DV8/SYS/exe/run/dboraslib.so
4 ETW000                                                                             694 0.564786
4 ETW000 [developertra,00000] Version of library '/usr/sap/DV8/SYS/exe/run/dboraslib.so' is "46D.00", patchlevel (0.2186)
4 ETW000                                                                           15725 0.580511
4 ETW000 [developertra,00000] function dsql_db_init loaded from library /usr/sap/DV8/SYS/exe/run/dboraslib.so
4 ETW000                                                                              60 0.580571
4 ETW000 [developertra,00000] function dbdd_exp_funs loaded from library /usr/sap/DV8/SYS/exe/run/dboraslib.so
4 ETW000                                                                             121 0.580692
4 ETW000 [developertra,00000] New connection 0 created                              96 0.580788
4 ETW000 [developertra,00000] db_con_connect (con_name=R/3)                      14511 0.595299
4 ETW000 [developertra,00000] find_con found the following connection for reuse:
4 ETW000                                                                              53 0.595352
4 ETW000 [developertra,00000] Got ORACLE_HOME=/oracle/DV8/920_64 from environment
4 ETW000                                                                           73038 0.668390
4 ETW000 [developertra,00000] -->oci_initialize                                    589 0.668979
4 ETW000 [developertra,00000] Got ORACLE_SID=DV8 from environment                   56 0.669035
4 ETW000 [developertra,00000] Got NLS_LANG=AMERICAN_AMERICA.WE8DEC from environment
4 ETW000                                                                              52 0.669087
4 ETW000 [developertra,00000] Logon as OPS$-user to get SAPR3's password            33 0.669120
4 ETW000 [developertra,00000] Connecting as /@DV8 on connection 0 ...               91 0.669211
4 ETW000 [developertra,00000] -->oci_logon(con_hdl=0, user='', dbname='DV8')       999 0.670210
4 ETW000 [developertra,00000] Thu Aug 14 16:58:20 2014                          245280 0.915490
4 ETW000 [dboci.c     ,00000] *** ERROR => OCI-call 'olog' failed: rc = 1017       263 0.915753
4 ETW000 [dbsloci.    ,00000] *** ERROR => CONNECT failed with sql error '1017'
4 ETW000                                                                             858 0.916611
4 ETW000 [developertra,00000] Try to connect with default password                  38 0.916649
4 ETW000 [developertra,00000] Connecting as SAPR3/<pwd>@DV8 on connection 0 ...
4 ETW000                                                                              53 0.916702
4 ETW000 [developertra,00000] -->oci_logon(con_hdl=0, user='SAPR3', dbname='DV8')
4 ETW000                                                                              46 0.916748
4 ETW000 [dboci.c     ,00000] *** ERROR => OCI-call 'olog' failed: rc = 1017    118256 1.035004
4 ETW000 [dbsloci.    ,00000] *** ERROR => CONNECT failed with sql error '1017'
4 ETW000                                                                              86 1.035090
4 ETW000 [developertra,00000] Got ORACLE_SID=DV8 from environment                  716 1.035806
4 ETW000 [developertra,00000] Got NLS_LANG=AMERICAN_AMERICA.WE8DEC from environment
4 ETW000                                                                              55 1.035861
4 ETW000 [developertra,00000] Logon as OPS$-user to get SAPR3's password            33 1.035894
4 ETW000 [developertra,00000] Connecting as /@DV8 on connection 0 ...               29 1.035923
4 ETW000 [developertra,00000] -->oci_logon(con_hdl=0, user='', dbname='DV8')        28 1.035951
4 ETW000 [dboci.c     ,00000] *** ERROR => OCI-call 'olog' failed: rc = 1017    126719 1.162670
4 ETW000 [dbsloci.    ,00000] *** ERROR => CONNECT failed with sql error '1017'
4 ETW000                                                                             165 1.162835
4 ETW000 [developertra,00000] Try to connect with default password                  36 1.162871
4 ETW000 [developertra,00000] Connecting as SAPR3/<pwd>@DV8 on connection 0 ...
4 ETW000                                                                              47 1.162918
4 ETW000 [developertra,00000] -->oci_logon(con_hdl=0, user='SAPR3', dbname='DV8')
4 ETW000                                                                              42 1.162960
4 ETW000 [dboci.c     ,00000] *** ERROR => OCI-call 'olog' failed: rc = 1017    123784 1.286744
4 ETW000 [dbsloci.    ,00000] *** ERROR => CONNECT failed with sql error '1017'
4 ETW000                                                                              70 1.286814
4 ETW000 [dblink      ,00627] ***LOG BY2=>sql error 1017   performing CON         1140 1.287954
4 ETW000 [dblink      ,00627] ***LOG BY0=>                                          42 1.287996
2EETW169 no connect possible: "DBMS = ORACLE                           --- dbs_ora_tnsname = 'DV8'"
Please help.
Thanks
Priyanshu Srivastava

Hi
Could you check this SAP Notes Error message
"ORA-01017: invalid username/password; logon denied
BR310E Connect to database instance DV8 failed"
1576837 - ORA-01017: invalid username/password;
1860519 - SAP fails to connect to the database
BR
SS

ERROR = CONNECT failed with sql error '1017'

Hi,
we are getting the following error when we run r3trans -dx.It is an windows system.
Here i have attached the trans.log.
4 ETW000 r3trans version 6.14 (release 700 - 16.10.08 - 16:26:00).
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time   : 30.11.2010 - 08:58:12
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc     ,00000] Tue Nov 30 08:58:14 2010                               0 0.000000
4 ETW000 [dev trc     ,00000] db_con_init called                                     0 0.000000
4 ETW000 [dev trc     ,00000] create_con (con_name=R/3)                              0 0.000000
4 ETW000 [dev trc     ,00000] Loading DB library 'dboraslib.dll' ...                 0 0.000000
4 ETW000 [dev trc     ,00000] load shared library (dboraslib.dll), hdl 0          3857 0.003857
4 ETW000 [dev trc     ,00000]      using "E:\usr\sap\TQ1\DVEBMGS10\exe\dboraslib.dll"
4 ETW000                                                                              22 0.003879
4 ETW000 [dev trc     ,00000] Library 'dboraslib.dll' loaded                         9 0.003888
4 ETW000 [dev trc     ,00000] function DbSlExpFuns loaded from library dboraslib.dll
4 ETW000                                                                              18 0.003906
4 ETW000 [dev trc     ,00000] Version of 'dboraslib.dll' is "700.08", patchlevel (0.167)
4 ETW000                                                                             143 0.004049
4 ETW000 [dev trc     ,00000] function dsql_db_init loaded from library dboraslib.dll
4 ETW000                                                                              16 0.004065
4 ETW000 [dev trc     ,00000] function dbdd_exp_funs loaded from library dboraslib.dll
4 ETW000                                                                              25 0.004090
4 ETW000 [dev trc     ,00000] New connection 0 created                              18 0.004108
4 ETW000 [dev trc     ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000                                                                              29 0.004137
4 ETW000 [dev trc     ,00000] db_con_connect (con_name=R/3)                         16 0.004153
4 ETW000 [dev trc     ,00000] find_con_by_name found the following connection for reuse:
4 ETW000                                                                              15 0.004168
4 ETW000 [dev trc     ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000                                                                              18 0.004186
4 ETW000 [dev trc     ,00000] CLIENT_ORACLE_HOME is not set as environment variable or
4 ETW000                        DIR_CLIENT_ORAHOME is not set as profile parameter.
4 ETW000                          assuming using instant client with unspecified location.
4 ETW000                                                                             223 0.004409
4 ETW000 [dev trc     ,00000] Oracle Client Version: '10.2.0.2.0'                 6714 0.011123
4 ETW000 [dev trc     ,00000] -->oci_initialize (con_hdl=0)                         23 0.011146
4 ETW000 [dev trc     ,00000] Client NLS settings: AMERICAN_AMERICA.WE8DEC        2397 0.013543
4 ETW000 [dev trc     ,00000] Logon as OPS$-user to get SAPRP1's password           16 0.013559
4 ETW000 [dev trc     ,00000] Connecting as /@TQ1 on connection 0 (nls_hdl 0) ... (dbsl 700 030508)
4 ETW000                                                                              22 0.013581
4 ETW000 [dev trc     ,00000] Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
4 ETW000                                                                              18 0.013599
4 ETW000 [dev trc     ,00000]    0 WE8DEC                                                    1 0000000006E6C090 000000000032AFF0 0000000006E7E378
4 ETW000                                                                             109 0.013708
4 ETW000 [dev trc     ,00000] Allocating service context handle for con_hdl=0     6894 0.020602
4 ETW000 [dev trc     ,00000] Allocating server context handle                      14 0.020616
4 ETW000 [dev trc     ,00000] Attaching to DB Server TQ1 (con_hdl=0,svchp=0000000006E7E238,srvhp=0000000006E80608)
4 ETW000                                                                              37 0.020653
4 ETW000 [dev trc     ,00000] Assigning server context 0000000006E80608 to service context 0000000006E7E238
4 ETW000                                                                           21591 0.042244
4 ETW000 [dev trc     ,00000] Allocating user session handle                        32 0.042276
4 ETW000 [dev trc     ,00000] Starting user session (con_hdl=0,svchp=0000000006E7E238,srvhp=0000000006E80608,usrhp=000000000032B808)
4 ETW000                                                                              32 0.042308
4 ETW000 [dboci.c     ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1017
4 ETW000                                                                           34551 0.076859
4 ETW000 [dbsloci.    ,00000] *** ERROR => CONNECT failed with sql error '1017'
4 ETW000                                                                           23657 0.100516
4 ETW000 [dev trc     ,00000]     set_ocica() -> OCI or SQL return code 1017         13 0.100529
4 ETW000 [dev trc     ,00000] Try to connect with default password                  12 0.100541
4 ETW000 [dev trc     ,00000] Connecting as SAPRP1/<pwd>@TQ1 on connection 0 (nls_hdl 0) ... (dbsl 700 030508)
4 ETW000                                                                              17 0.100558
4 ETW000 [dev trc     ,00000] Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
4 ETW000                                                                              16 0.100574
4 ETW000 [dev trc     ,00000]    0 WE8DEC                                                    1 0000000006E6C090 000000000032AFF0 0000000006E7E378
4 ETW000                                                                              18 0.100592
4 ETW000 [dev trc     ,00000] Assigning username to user session 000000000032B808
4 ETW000                                                                              15 0.100607
4 ETW000 [dev trc     ,00000] Assigning password to user session 000000000032B808
4 ETW000                                                                              23 0.100630
4 ETW000 [dev trc     ,00000] Starting user session (con_hdl=0,svchp=0000000006E7E238,srvhp=0000000006E80608,usrhp=000000000032B808)
4 ETW000                                                                              18 0.100648
4 ETW000 [dboci.c     ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1017
4 ETW000                                                                            3281 0.103929
4 ETW000 [dbsloci.    ,00000] *** ERROR => CONNECT failed with sql error '1017'
4 ETW000                                                                              19 0.103948
4 ETW000 [dev trc     ,00000]     set_ocica() -> OCI or SQL return code 1017         10 0.103958
4 ETW000 [dblink      ,00431] ***LOG BY2=>sql error 1017   performing CON [dblink#5 @ 431]
4 ETW000                                                                           10634 0.114592
4 ETW000 [dblink      ,00431] ***LOG BY0=>ORA-01017: invalid username/password; logon denied [dblink#5 @ 431]
4 ETW000                                                                              17 0.114609
2EETW169 no connect possible: "DBMS = ORACLE                           --- dbs_ora_tnsname = 'TQ1'"

Hi,
LOG BY0=>ORA-01017: invalid username/password; logon denied
You need to change your schema users password using "brconnect"
Try as follow:
1. Login as ora<sid>
2. Use below command to reset SAPRP1 users password
# brconnect -u system -f chpass -o SAPRP1 -p <new password>
If it still doesn't work... just set the password as "sap" (it is default password for schema user)
# brconnect -u system -f chpass -o SAPRP1 -p sap
Hope, it helps you...
Suggestions:
Above thing will help even if OPS$ mechanism is not set correctly...
But it is recommended to create and set permissions for OPS$ user. Else some BRTools function will produce errors...
Relevant notes are already suggested by others...
Please go through it word by word...
Regards.
Rajesh Narkhede

Partition failed with the error: The target Core Storage volume is locked

partition failed with the error: The target Core Storage volume is locked
Hello everybody!
Please help me.
I'm using MacBook Pro (Retina, 13-inch, Mid 2014), Processer:2.6 GHz Intel Core i5, Memory: 8 GB 1600 MHz DDR3.
my computer i have divided in 3 drives: 1-Machintosh HD (Mac OS) 2-Bootcamp (Window OS) & 3-Data (drive for data storage).
I don't want to use Window OS on my computer anymore so I decided to delete drive Data (the third drive) & Window OS (the second drive).
I want my hard drive become a single drive back but when I was formatting, there were some problem display:
then i clicked ok and it displayed like this:
then i try to format or create new partition, it's nothing happen when press button apply.
my computer has storage space 256GB but now when it is happened like this my storage space is only 127GB only.
so please help me.. what so I do with this problem.
Thank you.!

arajs wrote:
I used Boot Camp Assistant (for instaling Windows XP) and there was Partition error:
+*The disc cannot be partioned because some files cannot be moved.*+
+Back up the disk and use Disk Utility to format it as a single Mac OS Extended (journaled) volume. Restore your information to the disk and try using Boot Camp Assistand again.+
so I tried Yasu, verified permission, verified disk, and everything was ok, but in Disk Utility I was trying to split or change size of my disk but there is one error again:
+*Partition failed.*+
+Partition failed with the error: No space left on device+
but I have 64GB free space!
how must I "+Restore your information to the disk+" or what else can I do?
thanks!
This is a standard error message.
If you would have checked into the bootcamp forum you would have instantly found the solution.
http://discussions.apple.com/forum.jspa?forumID=1244&start=0
All that error message means is that you do not have enough conguous disk space available. No big deal at all for an older system. You have bits of files strewn over the "free space."
The solution as you would find in the bootcamp forum is to clone your HD, using a file-file clone, then test the clone to be sure it is working and then to erase your HD and clone back.
Works every time.
Message was edited by: Theodore

"New lifecycle definition" fails with "Unexpected error"

Similar Messages

Maybe you are looking for