New-MaiboxRestoreRequest is not recognized as the name of a cmdlet, function, script ?

I have restored successfully an exchange 2013 mailbox database from backup to the recovery database, but when i try to recover a user's mailbox I receive the following error
New-MaiboxRestoreRequest -SourceDatabase RDB1 -SourceStoreMailbox "testuser" -TargetMailbox [email protected]
The term 'New-MaiboxRestoreRequest' is not recognized as the name of a cmdlet, function,
script file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
I already have the "mailbox import export" management role assigned to the logged in administrator.
Anand_N

silly me i spelt the command wrong
Anand_N

Similar Messages

The term 'new-object' is not recognized as the name of a cmdlet, function, script file, or operable program.

I have a script that runs well the vast majority of the time. On occasion I get an exception. I would appreciate any insight as to why it fails on occasion. I can't understand why the new-object cmdlet wouldn't be recognized:
Message: The term 'new-object' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
Source: System.Management.Automation
StackTrace:    at System.Management.Automation.CommandDiscovery.LookupCommandInfo(String commandName, CommandTypes commandTypes, SearchResolutionOptions searchResolutionOptions, CommandOrigin commandOrigin, ExecutionContext context)
   at System.Management.Automation.CommandDiscovery.LookupCommandProcessor(String commandName, CommandOrigin commandOrigin, Nullable`1 useLocalScope)
   at System.Management.Automation.ExecutionContext.CreateCommand(String command, Boolean dotSource)
   at System.Management.Automation.PipelineOps.AddCommand(PipelineProcessor pipe, CommandParameterInternal[] commandElements, CommandBaseAst commandBaseAst, CommandRedirection[] redirections, ExecutionContext context)
   at System.Management.Automation.PipelineOps.InvokePipeline(Object input, Boolean ignoreInput, CommandParameterInternal[][] pipeElements, CommandBaseAst[] pipeElementAsts, CommandRedirection[][] commandRedirections, FunctionContext funcContext)
   at System.Management.Automation.Interpreter.ActionCallInstruction`6.Run(InterpretedFrame frame)
   at System.Management.Automation.Interpreter.EnterTryCatchFinallyInstruction.Run(InterpretedFrame frame)
   at System.Management.Automation.Interpreter.EnterTryCatchFinallyInstruction.Run(InterpretedFrame frame)
Here is the script I am running:
param([string]$endpoint)
$ErrorActionPreference = "Stop";
try
[System.Reflection.Assembly]::LoadFile("D:\dotNET_Apps\dotNETCOExBatch\DotNETCOExBatch\bin\DotNETCOExBatch.dll")
$schedule = new-object DotNETCOExBatch.CallService
$reply = $schedule.CallWebService($endpoint)
if ($reply)
  $host.setshouldexit(0)
else
  $host.setshouldexit(8)
Catch
$nl = [Environment]::NewLine
$evt=new-object System.Diagnostics.EventLog("Application")
$evt.Source="BatchPowerShell"
$infoevent=[System.Diagnostics.EventLogEntryType]::Error
$batchException = $_.Exception
$logMessage = " "
while ($batchException)
  $exMessage = $batchException.Message
  $exStackTrace = $batchException.StackTrace
  $exSource = $batchException.Source
  $logMessage += "$nl $nl Message: $exMessage $nl $nl Source: $exSource $nl $nl StackTrace: $exStackTrace"
  $batchException = $batchException.InnerException
$evt.WriteEntry(" Error starting or process cancellation of $endpoint $logMessage",$infoevent)
$host.setshouldexit(15)

Hi,
Please close your current powershell console, and start a new Window, and then check the result.
Like David replied, this is a strange issue, hard to find the cuase, but I will report the issue, hope
someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Regards,
Yan Li
TechNet Subscriber Support
If you are
TechNet Subscription
user and have any feedback on our support quality, please send your feedback
here.
Cataleya Li
TechNet Community Support

Powershell - The term is not recognized as the name of a cmdlet, function, script file, or operable program.

I am trying to run the following Powershell in orchestrator to move a new user into a specific OU based on the Department field specified by the creator.
$dept = {Department from "Initialize Data"}
if ($dept -contains 'IT') {$NewContainer = OU=IT,DC=test,DC=net}
When I run the Powershell it is returning the following
The term 'IT' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
How can I get it to not try and pass 'IT' as a cmdlet?

I think I may have actually found the solution I was missing { } around the command
I encapsulated the powershell in { }
$dept = {Department from "Initialize Data"}
if ($dept -contains 'IT') {$NewContainer = OU=IT,DC=test,DC=net}

Intermittent : The term 'get-date' is not recognized as the name of a cmdlet, function, script file, or operable program.

I have developed a batch harness whereby all scheduled tasks (W2012) invoke a common powershell script that acts as a wrapper to all our housekeeping jobs.
The first step in the wrapper is to create a Transcript file using following code
if ($Host.name -ne "Windows PowerShell ISE Host") # Transcript does not work within ISE
$timestamp = (get-date -format "yyyy-MM-dd-HH-mm-ss.fff")
$path = "c:\corp\$timestamp" + "_$pid.txt"
Start-Transcript -path $path -append
As expected the folder contains files with timestamp & pid in name
08/08/2013 11:00 AM            14,388 2013-08-08-11-00-01.158_1620.txt
08/08/2013 11:00 AM            12,506 2013-08-08-11-00-01.485_936.txt
08/08/2013 11:00 AM            12,994 2013-08-08-11-00-01.735_9328.txt
08/08/2013 11:00 AM            12,024 2013-08-08-11-00-01.766_8624.txt
08/08/2013 11:00 AM            13,902 2013-08-08-11-00-01.860_1756.txt
08/08/2013 11:01 AM            15,142 2013-08-08-11-01-31.392_10120.txt
08/08/2013 05:00 AM            14,982 _1692.txt
However note the last file, it has a zero length date time value in the name
The error recorded by PowerShell is
get-date : The term 'get-date' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At C:\Corp\Powershell\DMPRun-ScheduledTask.ps1:171 char:18
+    $timestamp = (get-date -format "yyyy-MM-dd-HH-mm-ss.fff")
+                  ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (get-date:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException
IE get-date has failed and returned a zero length field as the timestamp
Can anyone think of a good reason why get-date would fail intermittently?
Do I have to code defensively for base Powershell functions?

I implemented David's suggestion and now I intermittently get
import-module : Access to the path 'PowerShell_CommandAnalysis_Lock' is denied.
At D:\temp\loop_jc2_2013_11_25_08_55_02.ps1:15 char:1
+ import-module Microsoft.Powershell.Utility
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : NotSpecified: (:) [Import-Module], UnauthorizedA
   ccessException
    + FullyQualifiedErrorId : System.UnauthorizedAccessException,Microsoft.Pow
   erShell.Commands.ImportModuleCommand
I added a trap chain (My Powershell skills do not yet include recursive trap coding, any suggestions welcome)
trap {
    trap {
        "Trap1"
        "Exception: " + $_
        "Error: " + $Error[0]
        "Message: " + $_.Exception.Message
        "InnerException: " + $_.Exception.InnerException
        "StackTrace: " + $_.Exception.StackTrace
        "FailedItem: " + $_.Exception.ItemName
        import-module Microsoft.Powershell.Management
        import-module Microsoft.Powershell.Security
        import-module Microsoft.Powershell.Utility
    "Trap2"
    "Exception: " + $_
    "Error: " + $Error[0]
    "Message: " + $_.Exception.Message
    "InnerException: " + $_.Exception.InnerException
    "StackTrace: " + $_.Exception.StackTrace
    "FailedItem: " + $_.Exception.ItemName
    import-module Microsoft.Powershell.Management
    import-module Microsoft.Powershell.Security
    import-module Microsoft.Powershell.Utility
import-module Microsoft.Powershell.Management
import-module Microsoft.Powershell.Security
import-module Microsoft.Powershell.Utility
trap {
    "Trap3"
    "Exception: " + $_
    "Error: " + $Error[0]
    "Message: " + $_.Exception.Message
    "InnerException: " + $_.Exception.InnerException
    "StackTrace: " + $_.Exception.StackTrace
    "FailedItem: " + $_.Exception.ItemName
    exit 1
get-date
Now I intermittently get ..
Trap2
Exception: Access to the path 'PowerShell_CommandAnalysis_Lock' is denied.
Error: Access to the path 'PowerShell_CommandAnalysis_Lock' is denied.
Message: Access to the path 'PowerShell_CommandAnalysis_Lock' is denied.
InnerException:
StackTrace:    at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
   at System.Threading.Mutex.MutexTryCodeHelper.MutexTryCode(Object userData)
   at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
   at System.Threading.Mutex.CreateMutexWithGuaranteedCleanup(Boolean initiallyOwned, String name, Boolean& createdNew, SECURITY_ATTRIBUTES secAttrs)
   at System.Threading.Mutex..ctor(Boolean initiallyOwned, String name, Boolean& createdNew, MutexSecurity mutexSecurity)
   at System.Threading.Mutex..ctor(Boolean initiallyOwned, String name, Boolean& createdNew)
   at System.Management.Automation.AnalysisCache.CacheExportedCommands(PSModuleInfo module, Boolean force, ExecutionContext context)
   at Microsoft.PowerShell.Commands.ModuleCmdletBase.LoadUsingModulePath(PSModuleInfo parentModule, Boolean found, IEnumerable`1 modulePath, String name, SessionState ss, ImportModuleOptions options, ManifestProcessingFlags manifestProcessingFlags,
PSModuleInfo& module)
   at Microsoft.PowerShell.Commands.ImportModuleCommand.ImportModule_LocallyViaName(ImportModuleOptions importModuleOptions, String name)
   at Microsoft.PowerShell.Commands.ImportModuleCommand.ProcessRecord()
   at System.Management.Automation.CommandProcessor.ProcessRecord()
FailedItem:
import-module : Access to the path 'PowerShell_CommandAnalysis_Lock' is denied.
At D:\temp\loop_jc2_2013_11_25_09_19_52.ps1:26 char:1
+ import-module Microsoft.Powershell.Security
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : NotSpecified: (:) [Import-Module], UnauthorizedA
   ccessException
    + FullyQualifiedErrorId : System.UnauthorizedAccessException,Microsoft.Pow
   erShell.Commands.ImportModuleCommand

The term 'Get-SCVMHostCluster' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again.

Hello,
I'm have create a simple runbook using Orch 2012 R2 and I'm experiencing the above error message. Below is the runbook Powershell
$clusterdr=Get-SCVMHostCluster-Name"cluster-dr.samuel.com"
Start-SCComplianceScan
-VMMHostCluster$clusterdr-RunAsynchronously
Thank you
Loyan

Hi,
the "Run .Net Script" Actitity from Orchestrator executes PowerShell in version 2.0 (and 32bit-mode).
Try:
PowerShell = {
$clusterdr=Get-SCVMHostCluster-Name"cluster-dr.samuel.com"
Start-SCComplianceScan -VMMHostCluster$clusterdr-RunAsynchronously }
or
http://www.sc-orchestrator.eu/index.php/scoblog/128-run-the-powershell-version-of-windows-executing-the-orchestrator-runbook-service-in-run-net-script-activity
Regards,
Stefan
www.sc-orchestrator.eu ,
Blog sc-orchestrator.eu

Powershell error: 'Get-AzureRole' is not recognized as the name of a cmdlet

I am trying to
get PIP information on all instances of a role using Windows PowerShell
as per the document - "https://msdn.microsoft.com/library/azure/dn690118.aspx"
When I execute the command in the doc in the powershell:
Get-AzureRole -ServiceName FTPInAzure -Slot Production -InstanceDetails
The following error msg pops up:
'Get-AzureRole' is not recognized as the name of a cmdlet.
what's wrong?
Thanks
Thank you Morris

Hi,
Thanks for posting !
I am currently researching to gather more information which might take some time and hence will get back to you shortly.
Appreciate your time and patience.
Regards,
Sowmya

The term 'Add-SPDistributedCacheServiceInstance' is not recognized as the name

Hi,
I have setup Sharepoint 2013 standalone on Windows 2012 server. I am developing an app that will make use of social apis of sharepoint 2013. Out of the box installation didnt have Distributed Cache Service running and I am not sure if its needed to be run
in order to make social apis working on the server. Anyhow, since distributed cache service was showing up as Stopped and I could not restart it, I have deleted the distributed cache service and when I retry to re-add it by entering Add-SPDistributedCacheServiceInstance
command on powershell, I get the following error,
Add-SPDistributedCacheServiceInstance : The term 'Add-SPDistributedCacheServiceInstance' is not recognized as the name
of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included,
verify that the path is correct and try again.
At line:1 char:1
+ Add-SPDistributedCacheServiceInstance
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (Add-SPDistributedCacheServiceInstance:String) [], CommandNotFoundExcept
ion
+ FullyQualifiedErrorId : CommandNotFoundException
I am at total loss here. Any help/pointers to get around this error and setup social api working on this server will be helpful.
Regards,
Usman

The issue is because your PowerShell console has not loaded the appropriate SharePoint DLL
in order to call the API. To resolve this, you can open the SharePoint 2010 Management Shell to execute the script or add the assembly manually before running the script.
--Cheers

Install-ADDSDomain is not recognized as the name of cmdlet

Hi
I have issue with Install-ADDSDomain even if I try Import-Module ADDSDeployment they are not recognized. I updated the powershell to 3.0 version but in vain
The complexity resides in the simplicity Follow me at: http://smartssolutions.blogspot.com

Hi,
What version of WS are you running? Install-ADDSDomain requires a minimum of WS2012.
http://technet.microsoft.com/en-us/library/hh974722.aspx
Don't retire TechNet! -
(Don't give up yet - 12,950+ strong and growing)

Powershell Script Error, its saying The term is not recognized as the name of cmdlet

Hi,
When i am running following script into powershell, getting this error. i was not able to find out what could be the cause?Please
help me out.
Add-PSSnapin Microsoft.SharePoint.PowerShell -erroraction SilentlyContinue
functionCreate-SPFoldersBulk
    Param
           [parameter(Mandatory=$true)][string]$SiteUrl,
           [parameter(Mandatory=$true)][string]$LibraryName,
           [parameter(Mandatory=$true)][string]$CSVPath
    # Import CSV
    [array]$FolderList
= Import-Csv
$CSVPath
    # Script Variables
    $spWeb
= Get-SPWeb
$SiteUrl
    $spList
= $spWeb.Lists[$LibraryName]
    Foreach
($folderGroup
in
$FolderList) {
        # Create Parent Folder
        $parentFolder
= $spList.Folders.Add("",[Microsoft.SharePoint.SPFileSystemObjectType]::Folder,$folderGroup.Root)
        $parentFolder.Update()
        Write-Host "The Parent folder" $folderGroup.Root "was
successfully created" -foregroundcolor Green
        # Loop variables
        $i = 1
        $col = "S"
        $colID = $col + $i
        While ($folderGroup.$colID -ne $null)
            $newSubfolder = $splist.Folders.Add($parentFolder.Folder.ServerRelativeUrl,
[Microsoft.SharePoint.SPFileSystemObjectType]::Folder,$folderGroup.$colID)
            $newSubfolder.Update()
            Write-Host "The subfolder" $folderGroup.$ColID
"was successfully created"
-foregroundcolor
Cyan
            $i++
            $colID
= $col
+ $i
    $spWeb.Dispose()

Well assuming that is the entirety of your Create-SPFoldersBulk.ps1 script then the first issue is that it does currently do anything. Your script defines a function but then doesn't call it.
You're then running the script correctly as :
.\Create-SPFoldersBulk.ps1
and then I'm guessing you're trying to run the function, but that won't work from a command line. That's why you're getting the error, PowerShell doesn't know about the function outside of the code execution, and won't run the script instead since you haven't
added .\ before it.
If you really want it to be using a function then you'll need code later in the script to call that function, eg add the function call you entered at the prompt into the script at the bottom, and then run the script like you did initially, or if you're looking
to be able to run the script and be able to pass those parameters to it from the prompt then you probably want to adjust the script to :
Param (
[parameter(Mandatory=$true)][string]$SiteUrl,
[parameter(Mandatory=$true)][string]$LibraryName,
[parameter(Mandatory=$true)][string]$CSVPath
Add-PSSnapin Microsoft.SharePoint.PowerShell -erroraction SilentlyContinue
# Import CSV
[array]$FolderList = Import-Csv $CSVPath
# Script Variables
$spWeb = Get-SPWeb $SiteUrl
$spList = $spWeb.Lists[$LibraryName]
Foreach ($folderGroup in $FolderList) {
# Create Parent Folder
$parentFolder = $spList.Folders.Add("",[Microsoft.SharePoint.SPFileSystemObjectType]::Folder,$folderGroup.Root)
$parentFolder.Update()
Write-Host "The Parent folder" $folderGroup.Root "was successfully created" -foregroundcolor Green
# Loop variables
$i = 1
$col = "S"
$colID = $col + $i
While ($folderGroup.$colID -ne $null)
$newSubfolder = $splist.Folders.Add($parentFolder.Folder.ServerRelativeUrl, [Microsoft.SharePoint.SPFileSystemObjectType]::Folder,$folderGroup.$colID)
$newSubfolder.Update()
Write-Host "The subfolder" $folderGroup.$ColID "was successfully created" -foregroundcolor Cyan
$i++
$colID = $col + $i
$spWeb.Dispose()
and then call the script from the prompt as :
.\Create-SPFoldersBulk.ps1 -SiteUrl "https://spdev.baordbooks.com/legal/DAP/" -LibraryName "DAP Documents" -CSVPath "C:\Script_Files\folderList.csv"

The term "New-MailboxExportRequest" is not recognized.

Hi,
I'm trying to backup the mailboxes on my exchange server 2010 running on server 2008 R2 using the script from Steve Goodman (http://www.stevieg.org/2010/07/using-the-exchange-2010-sp1-mailbox-export-features-for-mass-exports-to-pst/)
I followed every step that is described in the tutorial. But if I run the script I get: The term "New-MailboxExportRequest" is not recognized as the name of a cmdlet, function, script file, or operable program.
The permissions for the folder are: exchange trusted subsystem, administrators Full control. I ran the command
"New-ManagementRoleAssignment -Role "Mailbox Import Export" -User Administrator" in the powershell of exchange. I tried exporting a single mailbox to PST but I got the same error. Nothing seems to work.
Does anyone know a solution? Help would be appreciated.
Cheers

Hi Sturme,
I suggest you follow this document use New-MailboxExportRequest to export the mailbox, then check whether this issue will occur or not.
New-MailboxExportRequest
http://technet.microsoft.com/en-us/library/ff607299.aspx
If you want to use the script from Steve Goodman, please paste the exact error you get (when you run it in Exchange Management Shell ).
Thanks,
Evan
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Calendar Server Error: At least one sharee was not recognized by the server. New invitations have not been sent.

I deployed a Mountain Lion Server with the calendar service active. Every time a user tries to share a calendar they have created under thier account to an external person using thier email address, the server gives the following error: "At least one sharee was not recognized by the server. New invitations have not been sent."
Invites to share a calendar to OD accounts on the server seem to work fine.
I have a calendar specific email address for external invites set up. The server seems to send individual event invites to external email addresses just fine, so I am thinking the email is working. Email is not served on the Mountain Lion Server. The account is through Google Apps using IMAP and SMTP.
What's even stranger, is that there doesn't seem to be any message in the Calendar error logs.
I've tried creating a new test account and no luck.
I don't know what else to try.
Thanks in advance for any help!

another 3rd party sofwtare that allows you opent he backup and grab info
http://www.processtext.com/abcblackberry.html
trial for 30 days, good program for that 30 days, I hear they arent a pleasant company to purchase from though

I just bought a mac mini over the weekend. I saved items from my old G4 to an external hard drive. I go to plug in the external hard drive and the new computer is not recognizing it. Help.

I just bought a mac mini over the weekend. I saved items from my old G4 to an external hard drive. I go to plug in the external hard drive and the new computer is not recognizing it. Help.
Here is the information I have. The external hard drive is a 120GB Acomdata. It has both USB and Firewire. When I go to plug in to the mac mini through USB, it is not being recognized. When I switch to Firewire on the old computer I can see it, however when I go to USB it is not being recognized (even on the old computer).
I'm at a loss as to what to do. Any advice would be helpful.

Shalese wrote:
Have you ever tried the FW 400 to 800 adapter?
I have used them on multiple occasions and they work just fine.
Try this (maybe you already have):
-Boot Mini with drive disconnected.
-Do not connect drive but turn it on
-wait a few seconds for drive to spin up
-plug cable into the Mini then into drive.
This is an old drive and may have some timing
issues.
I had an Acomdata drive a long time ago. It
worked fine with FW but USB was flakey.

When I try to send an email with photo attachment to a contact a screen appears stating "the sender name is not recognized by the server " what do I need to change so this will not happen in the future. I am a novice!!!!!

When I try to send an email with photo attachment on my iPad a screen appears which states " the sender is not recognized by the server" . What do I have to change so I can always send emails fr om my iPad with or without attachments. I am a novice!!!!!!

If you purchased about 2 years ago new I am sure it is a Intel iMac. To find out what type of iMac you have just click on the Apple menu item in the finder and select about this Mac. I would check the ISP mail site and get the correct outgoing mail server info.

At least one sharee was not recognized by the server. New invitations have not been sent.

I'm running 10.8.4, server 2.2.1 with Calendar server turned on.
I keep getting this error when trying to share a calendar from Calendar client: At least one sharee was not recognized by the server. New invitations have not been sent.
Any ideas?
Thanks.

another 3rd party sofwtare that allows you opent he backup and grab info
http://www.processtext.com/abcblackberry.html
trial for 30 days, good program for that 30 days, I hear they arent a pleasant company to purchase from though

I just bought the latest ipod shuffle to use with another older one. But when I tried to download updates and charge the new shuffle it is nowhere to be found. The new download is not recognized

I just bought the latest ipod shuffle and want to put my library songs on it. Why when I tried to install the latest version of i-tunes nothing happened. My new pod is connected to my laptop USB 2.0 port but it is nowhere to be found. Why is this new shuffle pod not recognized?

You downloaded iTunes AND installed it, right? What you downloaded is the installer, which installs the iTunes app (and other things like drivers) on your computer. You then have to run the iTunes app.
If you did that already, make sure the USB docking cable's plug is completely inserted into the shuffle's headphones jack, as shown in this document
http://support.apple.com/kb/TS3572
When connected, the shuffle's light should come ON. That indicates it is getting power. If it blinks orange (at least initially), that indicates it is connecting for data.
If you are good so far, in iTunes, the sidebar (along left side of window) may be hidden. If it is, from the menu bar, under View, select Show Sidebar. When the shuffle is connected, it should be listed in the sidebar, below DEVICES. Does it appear there?

New-MaiboxRestoreRequest is not recognized as the name of a cmdlet, function, script ?

Similar Messages

Maybe you are looking for