New mini was super slow,, finally got an update screen, so attempted to update. then it said could not update and now the mini shuts off without even booting up fully...Help?
need some help plese
I went back to iOS 7 and my backup file is restoring but when its done nothing is on my phone still and only takes 11-15 minutes to restore the backup instead of taking 25+ minutes like usual so I guess the backup is corrupted. How can I fix this?
Similar Messages
-
i have an ipod touch it is either a second or third edition and i have just had to restore it to factory setting as it was not working and now the wifi on the device is no longer working. Is there anything i can do about this?
Is it this:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem. A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Otherwise:
Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I have apple iPhone 4S upgraded to iOS 6.0.1 and everything was working fine suddenly my Wifi was not connecting and found the wifi on/off button is greyed out and to enable it I tried all resets but still my problem have not solved, still wifi is off
Same here.... No fix. Replacing is the option apparently and if you're out of warranty, you're SOL. That was as per the "Genius" at Apple.
-
My iPhone 4s acts like I need to plug in to iTunes and I got an error message saying it failed to download update and now the screen won't go away. USB port end on phone with arrow pointing to iTunes...
Now iTunes will not recognize my phone as a device...
-
you can never help any people
i took my iphone from u.k. now i am in india my simcard was not working in this so i restore it. it could not restore and now when i start it. it ask itunes. what should i do
-
Hey all, Ive tried my best to find a solution to my problem so hopefully someone can help.
When my Tom Tom Sat Nav app said I should delete the App before reinstalling the App but when I tried too the App was showing up as not purchased and had the price. Ive tried turning the phone on and off. Resetting the Phone. Ensuing that I am signed in with the right User ID. Ive tried changing the location back to the one I purchased the App from as well. Now Im really sure what to do. Any help would be much appreciated.No it does not show their either.
Just to be sure how do I know iClouds os on?
Thank you so much for this help. -
I had registry issues which were not allowing itunes to update. Finally got that fixed and now have the most current version of itunes on my PC. Now a new issue...itunes is not recognizing that the ipad is pulled into the PC. Help!
Hi there,
I have found and linked to a support page which should help you. Take a look.
iPad Assistant - iTunes
Regards,
Nathan -
I TRIED TO INSTALL NEW UPDATE AND NOW IT SAYS I NEED TO RESTORE MY IPHONE..HELP!
Help, I tried to install the new update and it told me that I had new stuff that i first needed to update on itunes and I had no idea what that was so i just went ahead and tried to install. it then ended up telling me there was an error and now its telling me i need to restore. So does that mean it completely wiped my iphone clean? I did previously install my pictures onto the computer and also did a backup to the computer. HELP- I am so nervous.
"So does that mean it completely wiped my iphone clean? "
Yes.
" HELP"
Restore your iphone. -
I was propmted to download a software update and now my ipad has frozen
I set the ipad to download the software update as prompted. I was prompted to connect the ipad to the mains electricity before running the update. I inadvertently (stupidly) forgot to switch on at the wall socket and left the download to run overnight. When I looked at the ipad the following morning the screen displayed the itunes symbol in the centre and what looks like a usb cable leading from this symbol to the home button. I realised I hadn't switched on the mains socket and did so then left the ipad for 24 hours to charge.
Now when I switch on I get the apple symbol and then the same itune and usb cable image and then the machine switches itself off again immediately.
Help please!!Hi..
Place the iPad in recovery mode > iOS: Unable to update or restore
Charge the battery prior to restoring the device.
iPad: Charging the battery -
I am using Windows 7. This never happened when I used XP Professional.
Hi John, thanks a lot, I see that. It actually answers another question I have. I already had that box checked, but I never knew that dialogue box was there. Anyway, my MOTU midi express 128 is dimmed and all 8 midi channel lights are on which has never happened before so there must be something wrong with my midi setup now. sheesh! This helps a lot! Thanks!
Rick -
I got the IOS6 update, and now the App Store always crashes. What happened?.
I recently updated to the IOS6 update, and now the App Store crashes every time I use it! It never happened before the update. What happened?
Common problem. See:
IOS 6 App store crash: Apple Support Communities -
I have Windows Vista computer. I am trying to upgrade my ITunes so can share files with other home computer. (Just got the new IPhone). I get this system error: The procedure entry point AVCFPlayerItemDurationChangedNotification could not be located in the dynamic link library AVFoundationCF.dll. Tries system restore and redownloaded...NOW Itunes will not even open. Can anyone help?
I uninstalled Apple Application Support, opened iTunesSetup with WinRar, and went down the list of msi's. AppleApplicationSupport was an install, all the others I did Repair. Did not have to reboot. Works okay now.
HTH -
Brand new computer is super slow and makes a clicking noise
My brand new computer is super slow and makes a clicking noise. Any suggestions? I have a lenovo X120e, purchased it around 2 months ago but due to moving across the country just started using it, not so happy so far but I would be happier if it would speed up a bit. Every click takes a while to register especially during browsing on the internet.
Can you run the ThinkVantage Toolbox's HDD diagnostics?
Alternatively, try HD Tune's error scan and check it's SMART page for warnings.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen -
HI ....I have a new macmini 2.5 Ghz 10.7.3 Lion, had a problem today ,it froze so I could not shut down using mouse or tablet pen. used the power switch, when I tried to restart I got audible 'beeps' from it. I managed to restart it but kept getting a message come up on one ot the dual screens ' restart using the power swich to turn it off , then press it again to restart.'
This worked okay , but now it just keeps freezing whenever I start it up. I thought the issue could be my old Epson Expression 1680 scanner not being compatible , so I have unplugged it. I also had a look at the new memory I installed when I got it, but this seems not be the problem.
It is connected up to an Eizo Flexscan S2231W using a cable straight into the HDMI input , the other monitor is a small Acer using the VGA into Thunderbolt port.
When I turn the Eizo screen on first and then press the power button on the mac-mini, I hear the chime then the screen flahes the 'Digital no signal' message on and off for about 30 seconds , then the monitor comes on as normal. But it is still freezing up on me after using it for a while and I am having to use the power switch button to turn it off again.
Can anyone help please.I really don't have an answer for that one. I guess that while trying to get things working correctly, I would use the most basic monitor I had which in your case would be the Eizon using the Thunderbolt port and adaptor.
When you boot into Safe Mode the startup is quite slow, but you should get the Apple logo and then the spinning gear below it (release the SHIFT key when it appears.) Then after a little more time you should see a gray progress bar appear below the spinning gear. When that disappears the computer will startup to a login screen. -
Images I move from one folder into another are disappearing, at first it was occurring immediately and only if I did not copy and paste the images. Today however I found out that images I had been using for days just up and vanished from their new location. A few of these images had copies in another folder that remained and the ones I couldn't find may or may not have ever had copies. I had backed up my system with time machine recently as well, so I went into the backup to retreive the lost images. When I searched and found the backup copies I got the error "the file alias cannot be opened because the original cannot be located". The crazy thing is that the images that remained on my computer did not give me the same error and opened like they should.
In short images that I am creating, saving, and using are disapearing so epically that even time machine versions are affected when retrieval is attempted. Any suggestions as to what I could be doing wrong without realizing it? Or perhaps other people have had similar bugs that are software related and have a solution?Hi Kevin,
I understand what you tried to do but it doesn't work that way. Swapping drive names will just mess things up.
You should be able to reconnect the files though: in the Locate Referenced Files dialog make sure you click the Show Reconnect Options button — this will give you access to all the connected drives. Locate one of the files and hit Reconnect All. Should do the trick.
Best
Maybe you are looking for
-
Problems with Office for Mac 2011 Outlook
So I've BYOD with my work, but having difficulty in accessing my Outlook email on the work's server. I keep getting the following pop-up for the mail stating that Outlook has redirected to the server (name of server here) to get new settings for your
-
Issues transfering pictures to PC
I'm trying to transfer my pictures from my iPhone to my PC and for some reason my PC isn't recognizing my iPhone under My Computer or under the Control Panel - Scanners and Cameras. But I can still sync my iPhone to iTunes.
-
XML Form - Empty value for param servername
Hi, I noticed the parameter servername are empty for RenderListItem file, but ok on Edit. Any hint? Thanks and Regards, John
-
How to shrink an array of strings
I am working on the method shift() which is similar to the one found in Perl. This method will take an array of strings and return the first string in the array. The resulting array should shrink by one element. However, I am having trouble with gett
-
I can't import or add a video file. The file is MP4. When I try to add to library, iTunes doesn't do anything. What should I do to have that video be in my library.